Professional Documents
Culture Documents
228 Specificationofworks Annexure AFinal
228 Specificationofworks Annexure AFinal
228 Specificationofworks Annexure AFinal
NAME OF WORK: Electrical work in C/w "Soft up gradation of Kahalgaon, Sabaur, Banka,
Sultanganj, Jamalpur, Munger Station under Amrit Bharat Station scheme."
Supply, fixing, testing and commissioning of High mast tower 16M with all accessories.
Details as:- Supply, installation, testing and commissioning including transportation at site location of
Galvanized steel Mast of 16 Meters height Mast lighting system. Base OAF-410 mm, top OAF-150 mm,
thickness-3mm (top Section) thickness-4 mm (bottom section), Base plate of dia min 570x25 mm with a
PCD of min 490 mm with its accessories. Mast shaft shall be in two sections, hot dip galvanized and
suitable for wind velocity as per IS 875 part3. It shall also include accessories for high mast including
head frame, steel wire rope (AISI 316, 7/19 construction) double drum winch having capacity Minimum
500 Kg, Galvanized Lantern carriage arrangement suitable for 8 Nos. luminaries Symmetrically & its
control gear boxes. The mast shall have an integral power tool installed inside the base compartment
for its operation.
3 1.1. Supply of Galvanized steel Mast of 16 M high mast system with its accessories.
1.2. Supply of foundation bolts manufactured from special steel and Hot Dip Galvanized along with nuts,
washers, anchor plates and templates ( one set of foundation accessories includes- 08 nos. M30x1000
foundation bolts plus one anchor plate plus 50% templates).
1.3. Supply of feeder pillar panel with digital astronomical timer and raising & lowering mechanism for
integral power tool.
1.4. Supply of GLS type single dome aviation obstruction light.
1.5. Making of civil foundation for 16 meter high mast considering the soil bearing capacity 5 T / Sq.
Signature Not meter at 3 meter depth. Concrete grade will be M-20, as per drawing attached.
Verified 1.6. Erection & commissioning of the high mast with the help of suitable equipment and wiring of
Digitally signed by BAL
MUKUND
SRIVASTAVA
Date: 2023.03.21
14:34:43 IST
Reason: IREPS-CRIS
Location: New Delhi
luminaries with all wiring materials and labour including erection of Control Panel.
1.7. Erection of 16 meter high mast high mast with the help of suitable equipments.
1.8. Making of earthing with 40mm dia heavy gauge GI pipe 2.5 mtr long and 25X3 GI strips. Including
earth pit & painting & writing of earth value in ohms as per IS 1239(Part-I) : 1990.
1.9. Erection of feeder pillar panel on a small civil foundation.
Preferable make of High mast tower:- Surya/Bajaj/Philips/Valmont/Consoul.
Note: If there is any variation between above specification of foundation & detail drawing of foundation
the detail mentioned in the drawing will be treated as final. Approval of drawing must be obtained
before supply.
Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum conductor, and suitable for
1100 Volt grade IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005, size 4 core 25
sq.mm.
5 Details as:- Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum
conductor of 4 core 25 Sq. mm cable suitable for 1100 Volt grade conforming to IS:7098/I/88 with
latest amendments no. 1, 2 & 3 reaffirmed 2005. Make- Polycab/ KEI/Havells/Finolex/Gloster.
Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum conductor, suitable for
1100 Volt grade IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005, size 4 core 70
sq.mm.
6 Details as:- Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum
conductor of 4 core 70 Sq. mm cable suitable for 1100 Volt grade conforming to IS:7098/I/88 with
latest amendments no. 1, 2 & 3 reaffirmed 2005. Make- Polycab/ KEI/Havells/Finolex/Gloster.
Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum conductor, suitable for
1100 Volt grade IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005, size 4 core 95
sq.mm.
7 Details as:- Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum
conductor of 4 core 95 Sq. mm cable suitable for 1100 Volt grade conforming to IS:7098/I/88 with
latest amendments no. 1, 2 & 3 reaffirmed 2005. Make- Polycab/ KEI/Havells/Finolex/Gloster.
Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum conductor, suitable for
1100 Volt grade IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005, size 4 core 120
sq.mm.
8 Details as:- Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum
conductor of 4 core 120 Sq. mm cable suitable for 1100 Volt grade conforming to IS:7098/I/88 with
latest amendments no. 1, 2 & 3 reaffirmed 2005. Make- Polycab/ KEI/Havells/Finolex/Gloster.
Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum conductor, suitable for
1100 Volt grade IS: 7098 Part-1 1988 with amendment number 1 and 2 and 3 Reaffirmed 2005, size 4 core 185
sq.mm.
9 Details as:- Supply of ISI marked XLPE insulated, PVC outerseathed armoured cable with aluminum
conductor of 4 core 185 Sq. mm cable suitable for 1100 Volt grade conforming to IS:7098/I/88 with
latest amendments no. 1, 2 & 3 reaffirmed 2005. Make- Polycab/ KEI/Havells/Finolex/Gloster.
Laying of LT cable through the HDPE pipe 50 mm Diameter PE 100 as per IS 4984 or Latest for Platform surface
cable laying of min 1 feet depth including supply of HDPE pipe (Cable will be supplied by Railway) For 25 mm cable
Details as:- Laying of LT cable through 50 mm dia HDPE pipe PE 100 as per IS 4984 or latest for platform
118 surface cable laying of minimum depth 1 feet to laying and inserting of LT cable of 25 mm dia through
HDPE pipes including supply of HDPE Pipe. (Cable will be supplied by Railway) Make of HDPE pipe –
Polycab/ori-plast/Supreme /Finolex.
Laying of LT cable through the HDPE pipe 50 mm Diameter PE 100 as per IS 4984 or Latest for underground cable
laying of min 1.5 feet depth including supply of HDPE pipe (Cable will be supplied by Railway) for 25 mm cable
Details as:- Laying of LT cable through 50 mm dia HDPE pipe PE 100 as per IS 4984 or latest for
11 underground cable laying of minimum depth 1.5 feet to laying and inserting of LT cable of 25 mm dia
through HDPE pipes including supply of HDPE Pipe. (Cable will be supplied by Railway) Make of HDPE
pipe –Polycab/ori-plast/Supreme /Finolex.
Laying of LT cable through the HDPE pipe 90 mm Diameter PE 100 as per IS 4984 or Latest for underground cable
laying of min 1.5 feet depth including supply of HDPE pipe (Cable will be supplied by Railway) For cable 70-90 mm
cable
12 Details as:- Laying of LT cable through 90 mm dia HDPE pipe PE 100 as per IS 4984 or latest for
underground cable laying of minimum depth 1.5 feet to laying and inserting of LT cable of 70-90 mm dia
through HDPE pipes including supply of HDPE Pipe. (Cable will be supplied by Railway) Make of HDPE
pipe –Polycab/ori-plast/Supreme /Finolex.
Laying of LT cable through the HDPE pipe 110 mm Diameter PE 100 as per IS 4984 or Latest for underground cable
laying of min 1.5 feet depth including supply of HDPE pipe (Cable will be supplied by Railway) For cable 120 and
above mm cable.
13 Details as:- Laying of LT cable through 110 mm dia HDPE pipe PE 100 as per IS 4984 or latest for
underground cable laying of minimum depth 1.5 feet to laying and inserting of LT cable of 120mm dia
and above through HDPE pipes including supply of HDPE Pipe. (Cable will be supplied by Railway) Make
of HDPE pipe –Polycab/ori-plast/Supreme /Finolex.
Cable trenching, laying, back filling & Connection of LT cables as per IS-1255, 1983 or latest.
Details as:- Cable trenching, laying, back filling & connection of LT cables through ground, under
Masonry floor /wall re-plastering for matching with the wall, road crossing as per site requirement with
14 cable route markers & meggaring before laying with certificate. In case of underground proper grade of
bricks & sand to be used for back filling as per IS-1255, 1983 or latest. (Cable will be supplied by Rly.)
Labour charge includes trenching, laying of cable through ground, under Masonry floor /wall re-
plastering for matching with the wall, road crossing as per site requirement including all.
Cable laying through pole/wall/floor as per site requirement as per IS-1255, 1983 or latest.
Details as:- Cable laying LT with proper Ms Clamp, nut bolt etc through pole/wall/floor/ surface
15 existing Pipe etc as per site requirement with meggaring before laying as per IS-1255, 1983 or
latest. (Cable will be supplied by railway).
Construction and laying of 110 mm dia HDPE pipe (PN-80, PN-8) by Micro tunneling method under the road,
foothpath, rail track etc. As per required depth to laying and inserting HT XLPE 3 Core X 95 sq.mm./LT cable 120-
185 sq mm cable through HDPE pipes. (Including supply of HDPE Pipe)(cable will be supplied by Railway)
16 Details as:- Laying of 110 mm dia HDPE pipe (PN-80, PN-8) by Micro-tunneling method under the road,
foot-path, rail track etc. As per required depth to laying and inserting of HT XLPE 3 Core X 95 sq. mm /
LT cable 4 core 120-185 sq. mm cable through HDPE pipes including supply of HDPE Pipe. (Cable will be
supplied by Railway) Make of HDPE pipe –Polycab/ori-plast/Supreme /Finolex.
Laying of 90 mm dia HDPE pipe (PN-63, PN-6) by Micro-tunneling method under the road, foothpath, rail track etc.
As per required depth to laying and inserting HT XLPE 3 Core X 50 sq.mm./ LT 4 core cable 95 sq mm cable through
HDPE pipes. (Including supply of HDPE Pipe) (cable will be supplied by Railway)
17 Details as:- Laying of 90 mm dia HDPE pipe (PN-63, PN-6) by Micro-tunneling method under the road,
foot-path, rail track etc. As per required depth to laying and inserting of HT XLPE 3 Core X 50 sq. mm /LT
4 core 95sq. mm cable through HDPE pipes including supply of HDPE Pipe. (Cable will be supplied by
Railway) Make of HDPE pipe –Polycab/ori-plast/Supreme /Finolex.
Butt welded joint for micro tunneling work with laying of 110 mm dia HDPE pipes (one joint for every 6 meters
length)
120 Details as:- Butt welded joint to be made for micro tunneling work with laying of 90-110 mm dia HDPE
pipes one joint must be done for every 6 meters length.
Supply & laying of 3'' dia medium gauge ISI brand G.I. pipe. for LT cable Track crossing and road crossing and for
rising of cable.
19 Details as:- Supply, laying and fixing of 3'' dia medium gauge ISI brand G.I. pipe for LT cable Track
crossing and road crossing and for rising of cable as per IS. Make- Jindal/Tata/Bansal.
Extra cost for concealed wiring for light /fan/exhaust/wall fan point.
21 Details as:- Extra cost for concealed wiring for light/fan/exhaust/wall fan point includes cutting of wall
for concealed wiring, laying of conduit pipe, wires etc and re-plastering of cutting portion with finishing
of wall as per previous wall including labour.
Supply & fixing of T8 LED tube light fitting complete with lamp.
Details as:- Supply of 20W LED tube light fittings and fixing , connection of fittings with necessary wire
connection from nearest point/JB with supply of all materials (wire) as per site including transportation
28 of fittings at site as per details specification vide annexure-A1. Make of fittings
Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar. If any other make offered other than
mentioned above should be as per specification attached at Annexure A1 & A3 with prior approval from
competent authority.
Supply fixing of BLDC energy efficient ceiling fan 1200 mm sweep (decorative).
Detail as:- Supply of BLDC ceiling fan min 1200 mm sweep (decorative) as per Usha model no EX 9 Glow
29 or similar with remote and fixing & connection at site location with necessary fixing arrangement,
downward rod and wire connection. Make- Usha/Havells/Crompton/orient/Bajaj.
Supply of LED down light fitting complete with luminaries. (Note: The unit is taken PER UNIT which means WATT)
Details as :- Supply & fixing, of LED down light fitting complete with luminaries. (Note: The unit is taken
31 PER UNIT which means WATT, the wattage and shape/size will be decided by the competent authority
make- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply of LED spotlight fitting complete with luminaries. (Note: The unit is taken PER UNIT which means WATT)
Details as:- Supply & fixing , of LED spot light fitting complete with luminaries. (Note: The unit is taken
32 PER UNIT which means WATT, the wattage and shape/size will be decided by the competent authority
make- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply, erection, testing commissioning of 20A AC Box with 1 no 25A motor starter switch (modular type) and 1 no
16/20/25/32A SPN RCBO for power supply to air conditioner
Details as:- Supply, erection, testing & commissioning of (Complete with Modular Plate, 20A Starter,25A
35 Plug & Socket-25A) as per Crabtree model no-Sapphire cat ref no-ACTO202504 or similar and RCBO as
per ABB cat No. DS201 M C6-32 AC100 or similar with surface mounting box including supply of all
material and labour charge. Make of all- Havells/Anchor/Crabtree/ABB/L&T/Legrand/BCH.
Supply, erection testing and commissioning of 6 meter height single arm decorative GI pole with cast aluminum
arms including 1 nos 80W tear drop pendant LED fitting along with foundation as per manufacturer's design
complete.
37 Details as:- Supply, erection, testing and commissioning of 6 Meters length GI decorative pole, of
minimum internal & external surface of the pole shall be Hot Dip galvanized to 65 micron DFT and
minimum sheet thickness-3mm with inbuilt junction box i.e. Flush Door & Base plate size minimum
200x200x12 mm or as per design, with single decorative cast aluminum arms including 1 nos. 80W tear drop
pendant LED fitting along with erection and commissioning and along with transportation at site location
of above pole. (Cement:Stone:Sand= 1 : 2 : 4) including RCC foundation accessories including foundation
bolt of minimum size- 4 nos x 16mm(D)x 600mm(L) and Supply erection & commissioning of Earthing
for electric Pole by provision of 50 mm dia 2.50 Mtr long GI pipe (Heavy gauge) ISI marked as per IS
1239(Part-1):1990 including drawing of 6 SWG G.I. wire from earth electrode to Pole base complete
with nut bolt including brazing as per site requirement, painting and writing of earth value in Ohms
including supply of all materials as per I.E Rules etc. Earth pipe Make-Tata/Jindal/bansal. Make of
pendant light:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar. Drawing to be
approved before supply by competent Railway authority.
Supply and fixing of LED ground burial luminaries of operating voltage range.90-260 volt, operating temperature
range -10 degree C to +50 degree C ,rated voltage - 240 VAC,50 HZ, system wattage - 12 watt
Details as:- Supply and fixing of LED ground burial luminaries of operating voltage range.90-260 volt,
38 operating temperature range -10 degree C to +50 degree C, rated voltage - 240 VAC,50 HZ, system
wattage – min 12 watt. Approval required before supply by competent Railway authority.
Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply and fixing of 4 way linear decorative fixture with IP67 housing power output 5 watt warm white.
Details as:- Supply and fixing of 4 way linear decorative fixture with IP67 housing power output
39 minimum 5 watt warm white. Approval required before supply by competent Railway authority.
Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply and fixing of LED pendant luminaries of 20 watt narrow beam powder coated aluminum housing and
pressure dia cast heat sink having high efficiency colour temperature 3000 K.
40 Details as:- Supply and fixing of LED pendant luminaries of 20 watt narrow beam powder coated
aluminum housing and pressure dia cast heat sink having high efficiency colour temperature 3000 K.
Approval required before supply by competent Railway authority.
Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply, erection, testing commissioning of LED building contour lighting, IP 67 with aluminum channel and
gripping.
Details as:- Supply, erection, testing commissioning of LED building contour lighting, IP 67 with
41 aluminum channel and gripping. Approval required before supply by competent Railway authority.
Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply, erection, testing and commissioning of 6 way DB.
Details as:- Supply, fixing & connection of SPN 6 way (No of module 6+2) MCB sheet steel Distribution
board with metal door as per ABB model no- E-SHC M 6 or similar Including supply of 4 nos. of SP MCB
42 (6-32A) as per ABB cat no- SB201 M- C6-32 or similar & 01 no RCCB 40A (100mA) as per ABB cat no-
FB202 AC- 40/0.1 or similar including labour charges. Make-ABB/L&T/Legrand/Siemens/Havells.
Details as:- Supply of maintenance free encapsulated compound base earthing system earth electrode
strip in pipe/ pipe in pipe ( Electrode duly zinc & alloy coated) with inbuilt terminal for connectivity. The
earth electrode size 3 mtr length & OD -48 mm dia in annular space of the GI pipe being filled with
crystalline conductive compound & refilling the earth with black fill compound ground enhancer 25 kgs
44 per pit with 4/6 SWG GI wire for connectivity of earth pit to switch panel.1 Electrode with 1 bag BFC &
GI strip for connectivity=1 unit (Pkg) and Installation/ Erection/ commissioning of maintenance free
earthing system 3 mtrs. Length 48 mm dia with 1 bag black fill compound. The item including digging of
earth pit 3 mtrs. Length 48 mm dia with 1 bag fill compound The item including digging of earth pit 3
mtrs depth & fixing earth electrode & refilling the same with BFC & provision of earth pit chamber of
cement masonry & cover. The jobs includes the necessary earth connection from pit head to switch
panel with 4/6 SWG GI Wire.
Supply, erection, testing commissioning of floor mounted indoor panel(1 no incomer 630A ACB and OG-2X250A,
2X100A and 2X63A MCCB)
Details as:- Supply, fixing and connection of floor mounted indoor panel consisting of following
components:
i) 3 phase with neutral Copper bus bar of min. 800 amps - 01 Set
ii) 630A 4 Pole Air Circuit breaker (50 kA ICS=100% Icu) -01Set. (Incoming )
iii) Thermal Magnetic MCCB 250A 4 Pole (50 kA ICS=100% Icu) - 02 Set. (outgoing)
45
iii)Thermal Magnetic MCCB 100A 4 Pole (50 kA ICS=100% Icu) - 02 Set. (outgoing)
iv) Thermal Magnetic MCCB 63A 4 Pole (50 kA ICS=100% Icu) - 02 Set.(outgoing)
v) LT 3 Lines LCD Display, Emfis Panel mounted Multi-Function Energy Meter (For Voltage, Current, &
Frequency, Power Factor, Power & Energy) with all accessories as - 01 set.
vi) Earthing terminal-02 set.
Make of ACB/MCCB/MFM meter:– ABB/L&T/Legrand/Siemens/Schneider/Havells/BCH
Supply of water cooler of cap-Cooling Capacity Liters/Hour- 150 Liters/hour. Storage Capacity 150 liter
46 Details as:-Supply and commissioning of water cooler of cap-Cooling Capacity Liters/Hour- 150 Liters/hour.
Storage Capacity 150 liter as per IS-IS: 1475 latest. Make- Usha/Blue star/ voltas/Aquaguard.
Supply, fixing and replacement/new provision of floor mounted LT distribution Feeder pillar consists of followings
Items:
1. 3 phase with neutral Aluminum bus bar of 300 amps & copper nut bolt etc.
Details as:- Supply, fixing and connection of floor mounted LT distribution Feeder pillar 4-way size
36''x30''x20'' made by 50mmx50mmx6mm angle covered with inside & outside anticorrosive painted
47 with MS sheet of 14 SWG(2mm thick) on RCC basement consisting of the following components:
i) 3 phase with neutral Aluminum bus bar of 300 amps & copper nut bolt etc as per IS specification.
ii) 2 Nos. 440 Volts Danger plate for both side.
iii) 04 No Porcelain Cut Out assembly of capacity 200 amps fixing in to the heavy duty PVC board.
iv) Hinged double doors of the same material shall be provided on the front, with necessary handles and
inbuilt locks with double keys. Neoprene gaskets shall be provided for the doors.
Supply, installation and commissioning of Power Generator- DG set of 125 AMF Control Panel
Details as:- Supply, installation and commissioning of Power Generator- DG set of 125 KVA with AMF
Control Panel, 3 phase, 1500 RPM, Power Generator supplied with Acoustic Enclosure and installation
49 & commissioning with necessary foundation as per site, including transportation cost at site. Make-
Kirloskar/CUMMINS/MAHINDRA POWEROL/Greaves.
Supply, fixing and connection of slim LED Recessed mounting (Panel light) fittings of cap-36W.
Details as:- Supply, fixing and connection of slim LED Recessed mounting (Panel light) fittings of cap-
50 36W Warm White/Cool white as per Syska model no- SSK-TVP-12030-36W or similar. Make of fittings-
Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar .
Supply, Fixing & connection of SPN 6 way (No of module 6+2) MCB sheet steel Distribution Board with metal door
i) Including supply of 4 nos SP MCB (6-32A)
ii) 01 no RCCB 32/40A (100mA)
53 Details as:- Supply, fixing & connection of SPN 6 way (No of module 6+2) MCB sheet steel Distribution
board with metal door as per ABB model no- E-SHC M 6 or similar including supply of 4 nos. of SP MCB
(6-32A) as per ABB cat no- SB201 M- C6-32 or similar & 01 no RCCB 32/40A (100mA) as per ABB cat no-
FB202 AC- 40/0.1 or similar including labour charges. Make-
ABB/L&T/Legrand/Siemens/BCH/Havells/HPL.
Supply, fixing & connection three phase distribution board provision for incomer 8 pole and single phase
outgoings 4 way (8+12) modules including followings items
1) FP MCB (63A)-01 nos
2) DP MCB (16A)-6 nos with necessary connection including earth."
54 Details as:- Supply, fixing & connection of three phase distribution board provision for incomer 8 pole
and single phase outgoings 4 way (8+12) modules conforms as per ABB cat no I -TPN04 WAY MD DB or
similar including followings items.. 1) FP MCB (63A)-01 nos as per ABB cat no-SB204 M- C63 or similar
2) DP MCB (16A)-6 nos as per ABB cat no SB202 M- C16 or similar with necessary connection including
earth including labour charge. Make of DB/MCB-Legrand/L&T/ABB/Siemens/BCH/Havells/HPL.
Supply, fixing and connection of 8W Landscape Luminaire -Bollard. With PCC foundation.
Details as:- Supply of 8W Landscape Luminaries –Bollard Warm/Cool white as per havells cat no-
CONEBLS8WLED830PSYMTOPC or similar. Make: Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/
58 C&S/Jaquar. Labour charge includes fixing, connection & commissioning of bollard with necessary PCC
base foundation including supply of all items for connection (wire) as per site condition including supply
of all foundation material.
Supply, fixing & connection of Junction Box (Min inside Size (mm)-H x W x D-140 X 140 X 95) with necessary
clamping arrangement with MS clamp and cable gland.
Details as:- Supply fixing and connection of cable Junction Box (Min inside Size (mm)-H x W x D-140
X 140 X 95) as per Sintex Cat No-GSJB-1414 or Identical including 4pole connector. The junction box
should have Fire retardant, High heat distortion temperature, Non-fusing Shockproof, rustproof and
59
termite resistant Ideal for both indoor and outdoor use Elegant appearance,100% weatherproof Cable
entry from bottom and/or sides with Pole mounting arrangement Maintenance-free for junction box
with necessary clamping arrangement with MS clamp and cable gland. Make of JB:-
Sintex/Hensel/L&T/Legrand or similar.
Supply, fixing of LED Post Top Fittings 25W Suitable for pole dia Ø 76 mm.
Details as:- Supply of LED Post Top Fittings 25W Warm/Cool white suitable for pole dia 76mm as per
havells cat no- CORALPT25WLED830SSYMTOPC or similar Make-
60 Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar. Labour charge includes fixing of 25W
LED Post top fittings at site location with necessary fixing arrangement and connection of fitting from
nearest JB with supply of all items as per site like wire etc.
Supply, fixing & commissioning of 65 mm (Dia) (medium) G.I pipe of 5 Ft including base foundation for fixing post
top lamp.
61 Details as:- Supply, fixing & commissioning of 65 MM (Dia) or as per site requirement medium gauge G.I
pipe of 5 ft including base foundation and muffling for post top lamp as per site requirement. Make of
GI pipe: Tata/Jindal/Bansal.
Supply, installation, commissioning & testing of earthing as per IS:3043 or latest amendment.
Details as:- Supply, erection and commissioning of earth pipe 2” dia 10 feet long heavy duty (min
thickness 4.5mm) ISI marked G.I. Pipe Tata/ Jindal/Bansal ISI mark pipe. The labour charge includes
construction of Earth chamber including drawing of 6 SWG G.I. wire from earth electrode to main
62 switch/panel complete with Masonry work and covering by RCC slab with net plastering as per site
requirement, writing of earth value in Ohms with black colour paint and painting of earth chamber &
covering with yellow paint including supply of all materials as per IS: 3043 or latest with all necessary
connection as per site requirement.
Supply and laying of GI strip 25 mm X 6 mm or 50 mm X 6 mm for laying from earth pipe to transformer/body/
panel board/ switch board earth neutral connection with LT & HT body etc.
63 Details as:- Supply and laying of GI strip 25 mm X 6 mm or 50 mm X 6 mm for laying from earth pipe to
transformer/body/panel board/ switch board earth neutral connection with LT & HT body etc joint
should be connected with necessary brazing/welding etc.
Supply & fixing of Black Wood Table Lamp With Khadi Shade ( 55-78 Cm).
Details as:- Supply & fixing of Black Wood Table Lamp With Khadi Shade ( 55-78 Cm) of reputed make,
64 including supply of min 9 watt LED lamp Warm white/cool white. Make of LED lamp:-
Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar. Approval of Black Wood Table Lamp
required before supply by competent railway Authority.
Supply and fixing of Crosscut Furniture Tripod Floor lamp with 12W warm LED light.
Details as:- Supply and fixing of Crosscut Furniture Tripod Floor lamp with 12W warm LED light of
65 reputed make. Approval required before supply by competent railway Authority. Make of LED Light:-
Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply and fixing of Town Glow Post Top as per Phillips cat no-BGP300 LED50 or similar along with supply and
fixing of 3 m Height of decorative pole Top- 2.5 inch, Bottom- 4 inch, protection- PU paint.
Details as:- Supply and fixing of Town Glow Post Top minimum 45 Watt as per Phillips cat no-BGP300
66 LED50 or similar along with supply and fixing of 3 m Height of decorative pole Top- 2.5 inch, Bottom- 4
inch, protection- PU paint including fixing of pole. Make of Post top:-
Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar. Make of pole:- K-Lite/Utkarsh/Bajaj
or similar.
Supply, fixing & commissioning of (medium) G.I pipe of 6 Ft including base foundation for fixing post top lamp of
60 mm (Dia)
67 Details as:- Supply, fixing & commissioning of (medium) G.I pipe of 6 Ft including base foundation as
per site requirement for fixing post top lamp of 60 mm (Dia) or as per site.
Supply, fixing and connection of 120W LED HIGHBAY light for shed.
Details as:- Supply of 120 W LED highbay fitting as per havells cat ref no.-
SAUCERGENXPROHBP120WLED757P90DBOLT G or similar and fixing and connection at site location
68 with necessary fixing arrangement including connection of fittings with necessary wire connection from
nearest point/JB with supply of all materials (wire) as per site. Make-
Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar, as per Annexure A.
Supply, fixing and installation of solar tree min 1 KW with charging facility and sitting arrangement.
Details as:- Supply, fixing and installation of solar tree with charging facility mentioned as under;-
1) Solar tree 1KW (Including PV module, VRLA battery/Inverter (of suitable capacity),
2) 4 Nos. street light of minimum 20Watt,
3) Mobile charging facility in suitable manner i.e. Modular board (USB-4Nos. AC Plug point-4Nos.)
73
with mobile resting tray,
4) Round sitting arrangement (Material: Steel) for minimum of 6 persons,
Drawing and design of the entire Solar tree to be approved by Competent Railway Authority before
supply. Make:- Reputed.
SITC of 12.5 HP submersible pump with starter including column pipe cable etc.
Details as:- Supply, installation, testing and commissioning of 12.5HP Submersible pump including:
1) Column pipe of suitable length 10 Nos. as per site requirement
2) 15 HP 3 phase ASD starter: 1 Nos.
3) Submersible flat Cu. 3 core 10 sq. mm cable, steel rope 8 mm size 6x19 IWRC (for holding pump
74
from both ends)- Length as per site
4) Additional accessories: Flange type sluice valve, NRV etc:- as per site requirement
Make of Pump:- Crompton/KSB/Kirloskar/Havells/CRI or similar. Make of starter:-
L&T/Legrand/havells/BCH/Crompton/CRI/ABB.
Supply and fixing and connection of VTPN DB IP-43 DOUBLE DOOR 12WAY including incomer 160A (MCCB) and
outgoing TP –MCB 6 nos & SP MCB -18 nos.
119 Details as:- Supply, fixing and connection of VTPN DB IP-43 DOUBLE DOOR 12WAY including incomer 160A (MCCB)
-01 nos and outgoing TP –MCB of C 43/63A:- 6 nos & SP MCB of C 16-40A -18 nos. Make-
ABB/L&T/Havells/Siemens.
Data Entry recorder completed with all accessories. (Intel Core i5 All in One PC with 23.8 Inch Display/ Windows 10
Professional)
76 Details as:- Data Entry recorder complete with all accessories. (Intel Core i5 All in One PC with 23.8 Inch
Display/ Windows 10 Professional, minimum 128GB SSD, RAM-8GB DDR4, HDD-1000GB, Wireless
mouse included with Keyboard and inbuilt Webcam and CD drive. Make-HP/DELL/Lenovo/Acer
Supply of Compact Monochrome Multifunction Printer with Direct Wi-Fi (Print, Scan, Copy) as per HP MFP-136W
or similar.
77 Details as:- Supply of Compact Monochrome Multifunction Printer with Direct Wi-Fi (Print, Scan, Copy)
as per HP MFP-136W or similar. Make-HP/Canon/Brothersoft.
Supply of Line Interactive UPS Rating 1.0 KVA as per microtech -Legend 1000 or similar.
78 Details as:- Supply of Line Interactive UPS Rating 1.0 KVA as per microtech -Legend 1000 or similar.
Make Microtek/V-guard/Luminious
Supply of Radio detection Precision Pipe and Cable locator / Route tracer.
79 Details as:- Supply of Radio detection Precision Pipe and Cable locator / Route tracer, depth measurement up-to
10meter-Make-Radiodetection or similar (Full demonstration to be given to staff concerned)
Supply, fixing and connection TPN DB 6 way (8+18) with metal door including supply and fixing of followings as
under-
1) MCB -4P 63A-01 nos (incomer)
2) SP-MCB (6-32) -18 nos
Details as:- Supply, fixing and connection TPN DB 6 way (8+18) with metal door as per as per ABB cat
102 no- ESHDB M 6 or similar including supply and fixing of followings as under- 1) MCB -4P 63A-01 nos
(incomer) as per ABB cat no-SB204 M-C63 or similar 2) SP-MCB (6-32) -18 nos as per ABB cat no-
SB201 M-C6/C32 or Similar" including all necessary wire connection. Make of DB/MCB:-
ABB/L&T/Legrand/Havells/Siemens or similar.
Supply, Fixing and connection of Cable Junction Boxes IP 66 with terminals including M 20 x 1.5/M 25 x 1.5
Synthetic short entry thread metric cable gland with lock nut as per site requirement.
103 Details as:- Supply, Fixing and connection of Cable Junction Boxes IP 66 as per Hensel cat no- DK
0402 G or similar with terminals including M 20 x 1.5/M 25 x 1.5 Synthetic short entry thread metric
cable gland with lock nut as per site requirement. Make- Hensel/legrand/ABB/Siemens or similar.
Installation Testing and commissioning of the system and fixing of LED RGBW fitting at site location with supply of
MS clamp, fastener, Nut bolt screw etc as per site requirement and entire programming and free demonstration of
the system.
107 Details as:- Installation Testing and commissioning of the system and fixing of LED RGBW fitting with all
accessories at site location with supply of MS clamp, fastener, Nut bolt screw, Clamp etc as per site
requirement and entire programming with training of staff and free demonstration of the system at
every location including all materials.
Supply & fixing of Cable Tray (Box type with cover) ( Size 300 mm X 75 mm) Steel - Hot dipped Galvanized
108 Details as:- Supply & fixing of Cable Tray (Box type with cover) ( Size 300 mm X 75 mm) Steel - Hot dipped
Galvanized for outdoor and indoor use. Thickness- 1.6mm, with cover thickness 1.6mm. Make:- Legrand/ABB or
similar.
Dismantling of Fittings.
Details as:- Dismantling of outdoor fittings in good condition as advised by concern SSE and the same to
117 be handed over to store with proper acknowledgment.
Track lights 20W as per Philips model no- 31446 warm or similar.
111 Details as:- Supply, fixing and connection of Track lights 20W as per Philips model no- 31446 warm or
similar at site location. Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply and fixing wall lights 7W as per Philips cat no-581922 Atom 7W IP44 or similar.
113 Details as:- Supply, fixing and connection of wall lights 7W as per Philips cat no-581922 Atom 7W IP44
or similar at site location. Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply and fixing of picture light-12W as per Philips model no-31403 Muziris or similar.
114 Details as:- Supply, fixing and connection of picture light-12W as per Philips model no-31403 Muziris or
similar as per site location. Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar.
Supply, fixing and connection of LED ARCHITECTURE Linear Profile Light Min 40W/meter.
115 Details as:- Supply, fixing and connection of LED ARCHITECTURE Linear Profile Light Min 40W/meter as per site
location. Make:- Phillips/Crompton/Bajaj/Havells/Osram/Surya/Syska/ C&S/Jaquar .
Item No. 3 Foundation
Annexure-A1
For standalone(Batten type) Integrated Driver with aluminum housing & milky
polycarbonate diffuser
Annexure A3
Following under mentioned criteria must be followed for supply of LED fittings/fixture
a) LM-79 & LM-80 report or latest report to be provided conforming to govt. approved NABL accredited lab.
b) LED Driver should have BIS certified.
c) System efficacy: Greater than or equal to 100 lumen/Watt for fitting up to 45W and above 45W min 120Lm/Watt.
d) ISO Certification should be for manufacturing as well as trading of luminaries.
e) Acceptance test/inspection to be carried out at govt. approved NABL laboratory only.
Guarantee: Guarantee period of the LED work is Five years from the date of completion of the work. Any defects &
deficiencies will be rectified/replaced free of cost within guarantee period.
Guarantee: Guarantee period other than LED work is one year from the date of completion of the work. Any defects &
deficiencies will be rectified/replaced free of cost within guarantee period.
Guarantee: Guarantee period of DG set is two years from the date of completion of the work. Any defects & deficiencies
will be rectified/replaced free of cost within guarantee period.