Professional Documents
Culture Documents
TDB-E-CM 725-Technisches Datenblatt
TDB-E-CM 725-Technisches Datenblatt
TDB-E-CM 725-Technisches Datenblatt
Technical Data
Coldmatic CM 725
Technical Data
Working ranges
Forming stations 7
2
Max. wire diameter at 600 N/mm tensile strength 20 (22) mm
Performance
Tools
Strokes
Technical data CM 725, 0821 en, printed in Switzerland, subject to technical and equipment changes. © Hatebur Umformmaschinen AG, 2021.
Punch ejector (continuously variable) 18-52 mm
Weight 60 t
* For round parts made of steel, dependent on the forming degree, the sequence of operations, the material and temperature.
1
*2 Stroke rate reduction in the range of 140-180 min-1 at a cut-off length of 60-125 mm.
*3 For station forming loads max. 1000 kN the multi punch block ø 90 mm is required.