This document outlines premium investment casting tolerances that can be achieved under special conditions. It provides general coordinate tolerances for dimensions from inches to millimeters. Surface finish is a minimum RMS 125√ or better. Unless otherwise specified, fillet radii are 0.060" minimum, corner radii are 0.060" maximum, and angular tolerance is +/- 0.5 degree. A minimum machining stock of 0.040" can be provided if required, and a minimum wall thickness of 0.030" +/- 0.010" can be achieved.
This document outlines premium investment casting tolerances that can be achieved under special conditions. It provides general coordinate tolerances for dimensions from inches to millimeters. Surface finish is a minimum RMS 125√ or better. Unless otherwise specified, fillet radii are 0.060" minimum, corner radii are 0.060" maximum, and angular tolerance is +/- 0.5 degree. A minimum machining stock of 0.040" can be provided if required, and a minimum wall thickness of 0.030" +/- 0.010" can be achieved.
This document outlines premium investment casting tolerances that can be achieved under special conditions. It provides general coordinate tolerances for dimensions from inches to millimeters. Surface finish is a minimum RMS 125√ or better. Unless otherwise specified, fillet radii are 0.060" minimum, corner radii are 0.060" maximum, and angular tolerance is +/- 0.5 degree. A minimum machining stock of 0.040" can be provided if required, and a minimum wall thickness of 0.030" +/- 0.010" can be achieved.