Professional Documents
Culture Documents
Icx System
Icx System
PREMIUM
IMPLANT-
SYSTEM.
ICX-ACTIVE
LIQUID
February 2021/01
ICX-SYSTEM
OVERVIEW
ICX IMPLANTS
ICX SURGERY
ICX-PROTHETICS
www.medentis.de
C o nt e nt
C O NTE NT
SERVICE
SURGERY
ICX-ACTIVE-MASTER Implants........................................................................................................ 32
ICX-ACTIVE-WHITE-Ceramic-Implants......................................................................................... 32
ICX-IMPRESSION POSTS
ICX-MODEL ANALOG
PROSTHETICS
CERICX-ZIRCONIUM ABUTMENTS
3. hybrid technology
ICX-ACCESSORIES
Overview ICX Prostheticv box................................................................................................... 64/65
Batch number
Item number
Gamma sterilized
Do not resterilize
Colour representations and sizes of the illustrations in this brochure are not binding!
Note 1: The tightening torque of 5 to 10Ncm should not be exceeded. Please tighten all ICX-mini cover screws by hand only. If
you screw them in with 20 Ncm or more, there is a risk that conical forces will be created, which will make it almost impossible
to loosen them later.
Note: G
H = Gingival height
I CX- Ø 3,3mm
ICX-Ø 3.3mm BL & TL IMPLANTS
The ICX-PREMIUM- Ø 3.3mm and the Our goal was to provide you, the prac-
ICX-ACTIVE-MASTER Ø 3.3mm implants titioner, with an implant that can be
open up completely new horizons in the used in borderline cases, without
field of reduced-diameter Implantion! compromising stability.
We are expanding our ICX family with a So now you can solve difficult cases
reduced-diameter implant. This means, more easily and rely on our ICX-PRE-
that additional indications can be covered MIUM Ø 3.3mm and the ICX-ACTIVE-
with the usual high quality and precision of the ICX- MASTER Ø 3.3mm implants!
typical implant-abutment connection.
To be able to guarantee this, we have rethought this for
the narrow diameter and launched a completely new
prosthetic line.
IMPORTANT NOTE:
The ICX-PREMIUM Ø 3.3mm and the ICX-ACTIVE-MASTER
Ø 3.3mm implants can NOT be supplied with the ICX standard
prosthetics!
The ICX-Ø 3.3mm implants have a different inner geometry
to the geometry of the ICX-PREMIUM & ICX-ACTIVE-MASTER
red, Ø 3.75mm - green, Ø 4.1mm - blue, Ø 4.8mm.
Ø 3,3mm
Article-No.
Ø 3,3mm
Article-No.
Ø 3.3mm 1.7mm
Article-No.
Length
1.7mm
Ø 3.3mm
Article-No.
Length
TAM-001-330080 ICX Active Master TissueLine Implant Ø 3.3 x 8mm (Pack of 6) NEW!
TAM-001-330100 ICX Active Master TissueLine Implant Ø 3.3 x 10mm (Pack of 6) NEW!
TAM-001-330125 ICX Active Master TissueLine Implant Ø 3.3 x 12.5mm (Pack of 6) NEW!
I CX-D R I LLS
ICX-Ø 3.3mm BL & TL DRILLS
12.5mm
Explanation:
Grooves in the drill 10.0mm
stand for depth
of the respective hole.
8.0mm
0.3mm
With the ICX-Ø3.3mm drills, the drill length is 0.3mm longer due to the drill tip
0.3mm longer - It must be ensured, that this additional length is permissible,
when working in the area of important anatomical structures.
I N STR U M E NT S
INSTRUMENTS
S c r ewd r i ve r
Article-No. Article Dimensions Material
Note: The screwing-in torque of 5 to 10Ncm should not be exceeded. Please screw in all ICX cover screws and healing caps only by hand. If you
screw them in with 20 or more Ncm, there is a risk that conical forces will be created, which will make it almost impossible to loosen them later.
Note: H = Length from implant top edge - GH = Gingival height
ICX-Titanium-Abutments
Article-No. Article Dimensions Material
GH 1mm
ICX Ø 3.3 abutment
N-007-020401 Ø 4.0 Titanium
straight, 1mm
K 5.5mm
GH 2mm
ICX Ø 3.3 abutment
N-007-020402 Ø 4.0 Titanium
straight, 2mm
K 5.5mm
GH 3mm
ICX Ø 3.3 abutment
N-007-020403 Ø 4.0 Titanium
straight, 3mm
K 5.5m
ICX-Titanium-Aesthetic abutments
Article-No. Article Dimensions Material
GH 1: 1mm
ICX Ø 3.3 Aesthetic GH 2: 3mm
N-010-020010 Titanium
15°, 1mm Ø 4.0
K 7.4mm
GH 1: 2mm
ICX Ø 3.3 Aesthetic GH 2: 4mm
N-010-020020 Titanium
15°, 2mm Ø 4.0
K 7.4mm
GH 1: 1mm
ICX Ø 3.3 Aesthetic GH 2: 3mm
N-010-040010 Titanium
25°, 1mm Ø 4.0
K 7.4mm
GH 1: 2mm
ICX Ø 3.3 Aesthetic GH 2: 4mm
N-010-040020 Titanium
25°, 2mm Ø 4.0
K 7.4mm
K
All articles incl. connection screw All articles incl. laboratory screw N-007-000002 GH 2 GH 1
N-011-000001
ICX Ø 3.3
N-011-000001 SW 1.2mm Titanium
connection screw
ICX Ø 3.3
N-007-000002 SW 1.2mm Titanium
laboratory screw
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
10501 straight 1mm GH 1.2/3.1mm A = Tooth colour „bright“
K 6.5mm
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
10502 straight 2mm GH 2.2/4.1mm
K 6.5mm
B = Tooth colour „standard
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
10503 straight 3mm GH 3.2/5.1mm
K 6,5mm
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium C = Tooth colour „dark
10504 straight 4mm GH 4.2/6.1mm
K 6.5mm
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
10505 straight 5mm GH 5.2/7.1mm
K 6.5mm
Ø 5.5mm/
N-036-A/B/ ICX Ø 3,3 CERICX 15° Ø 6.5mm
Titanium
C20005 Aesthetics 0.5mm GH 1.2/3.2mm
A = Tooth colour „bright“
K 7mm
Ø 5,5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6,5mm
Titanium
20015 15° Aesthetics 1.5mm GH 2,2/4,2mm
K 7mm
B = Tooth colour „standard
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
20025 15° Aesthetics 2.5mm GH 3.2/5.2mm
K 7mm
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
20035 15° Aesthetics 3.5mm GH 4.2/6.2mm C = Tooth colour „dark
K 7mm
Ø 5.5mm/
N-036-A/B/C ICX Ø 3.3 CerICX Abutment Ø 6.5mm
Titanium
20045 15° Aesthetics 4.5mm GH 5.2/7.2mm
K 7mm
All articles incl. connection screw All articles incl. laboratory screw N-007-000002
N-011-000001
C E R I C X 3 . 3 h e a l i n g c a p s ( g i n g i va f o r m e r s)
Article-No. Article Dimensions Material NEW
N-004-116003 ICX-3.3 CERICX healing cap Ø=7 GH=3mm Titanium
A d h e s i ve a n d s c a n a b u t m e n t s
Article-No. Article Dimensions Material
Ø=3.6mm
NEW!
ICX-3.3 Adhesive base GH=0,5mm Titanium
N-029-000001
K=3.5mm
All articles incl. connection screw All articles incl. laboratory screw N-007-000002
N-011-000001
C o C r- a b u t m e n t
Article-No. Article Dimensions Material
Ø 3.6mm
ICX-CoCr abutment CoCr Biodur CCM/BC
GH: 0.5mm
NEW! (cast-on able NEM castable
K: 5mm
N-008-020001 with NEM), (Note CTE values when
with hex
Plastic sleeve: firing on ceramics)
9mm
THE FAIR
PREMIUM
IMPLANT
SYSTEM.
ICX-MULTI ® -Abutments
Article-No. Article Dimensions Material
K 2.2mm
ICX Ø 3,3 MULTI Abutment
N-020-750010 GH 1mm Titanium
straight 1mm
Ø 4.8
K 2.2mm
ICX Ø 3,3 MULTI Abutment
N-020-750020 GH 2mm Titanium
straight 2mm
Ø 4.8
K 2.2mm
ICX Ø 3,3 MULTI Abutment
N-020-750030 GH 3mm Titanium
straight 3mm
Ø 4.8
K 2.2mm
ICX Ø 3,3 MULTI Abutment
GH 1 = 1mm
N-020-751710 17° Titanium
GH 2 = 2.4mm
1mm hex
Ø 4.8
K 2.2mm
ICX Ø 3,3 MULTI Abutment GH 1 = 2mm
N-020-751720 Titanium
17° 2mm hex GH 2 = 3.6mm
Ø 4.8
K 2.2mm
ICX Ø 3,3 MULTI Abutment
GH 1 = 1mm
N-020-753510 35° Titanium
GH 2 = 3.75mm
1mm hex
Ø 4.8
K 2.2mm
ICX Ø 3,3 MULTI Abutment GH 1 = 2mm
N-020-753520 Titanium
35° 2mm hex GH 2 = 4.75mm
Ø 4.8
K
GH 2
Note: GH = Gingiva height · K = Chimney height
GH 1
C o n n e c t i o n s c r ew ( i n c l u d e d )
Article-No. Article Dimensions Material
Ø 4.8
C-003-000005 ICX-MULTI Protection cap Titanium
L 4.6mm
Ø 4.8
ICX-MULTI Prosthetic abutment, L 12mm
C-020-951120 Titanium
Titanium (shortanable to
4.1mm)
Ø 4.8
ICX-MULTI Prosthetic abutment, L 12mm Plastic
C-020-952120
Plastic (shortanable to burnable
4.1mm)
Ø 4.8
ICX-MULTI Prosthetic abutment
L 12mm
C-020-953120 PEEK Peek
(shortanable to
(PROVISIONAL/BITE REGISTRATION)
4.1mm)
L 12.5mm
C-030-000010 ICX-MULTI Scan cap B 4.5mm Peek
T 6.5mm
ICX-Maximus cap,
Ø 4.8
C-031-100001 GH 3mm, (additionally to GH ICX-multi Titanium
L 4.4mm
abutment)
t-b o n a-SYS T E M
ADHESIVE AND SCAN ABUTMENTS - T-BONA - ICX-MAXIMUS
t- b o n a b a l l h e a d a b u t m e n t s
Article-No. Article Dimensions Material
I C X- M a x i m u s - a b u t m e n t s
Article-No. Article Dimensions Material
THE FAIR
PREMIUM
IMPLANT-
SYSTEM.
t- e c co/m a t r i ce s
Article-No. Article Material
t-ecco, matrice, complete,
Titanium
incl. golden inner matrice,
T-13825 plus
red plastic auxiliary ring
AuPt
and model analog
Titanium
T-13846 t-ecco, golden inner matrice (weak)
grade5
Titanium
T-13845 t-ecco, red inner matrice (strong)
grade5
Activation
Stainless
T-10571 t-ecco activator/deactivator
steel
Deactivation
Hex tool,
Stainless
960002 SW 0.9 short,
steel
L 20mm
Hex tool,
Stainless
C-015-100029 SW 0.9 long, one-piece
steel
L 35mm
D a l b o ® - P LU S/m a t r i ce
Article-No. Article Material
Dalbo PLUS Female TE set elliptical Titanium
DP-055890 Complete
+ incl. Dalbo PLUS lamella insert
plus
Elitor
Note: Please be sure to use the Dalbo-PLUS tool (DP-072609) in order to adjust the retention individually
according to the situation.
Matrices
I C X M a x i m u s A c ce s s o r i e s :
Article-No. Article Material
Retention insert transparent
Plastic
C-031-852400 Pull-off force approx. 2.3 kg, strong
(pack of 4)
Divergence compensation ± 10°
Processing package
Titanium/
(titanium cap with black
C-031-851902 Plastic
laboratory insert, spacer ring
(2er Pack)
and retention inserts)
Processing package
Titanium/
(titanium cap with black
C-031-851910 Plastic
laboratory insert, spacer ring
(pack of 10)
and retention inserts)
Titanium
C-031-850501 Impression post
(pack of 4)
The one, & two-piece ICX Maximus abutments are va proprietary development of medentis medical,
compatible with the Locator™ abutments. Available for all ICX implants!
Products marked with ® and ™ are registered trademarks of the respective manufacturer.
ICX-ACTIVE
LIQUID
N e w!
FEATURES
AND ADVANTAGES:
➟ Immediate loading is
often possible.
I C X- S h o p : w w w. m e d e n t i s . d e
24 Service-Tel.: +49 (0)2641 9110-0 · www.medentis.de
OVERVIEW:
IMPLANTS
ICX-ACTIVE LIQUID IMPLANTS
Article-No.
ICX-ACTIVE LIQUID IMPLANTS -
only in a pack of 6.
LAC-330080 Ø 3.3mm, length 8mm, ICX-Active Liquid Implant
LAC-330100 Ø 3.3mm, length 10mm, ICX-Active Liquid Implant
LAC-330125 Ø 3.3mm, length 12.5mm, ICX-Active Liquid Implant
ICX IMPLANTS/PACK OF 6
ICX-IMPL ANTS/Pack of 6
Please note
when ordering prosthetic abutments with GH 0mm:
ICX-Tissue Level (TL) implants have - due to the tulip - a different platform
as the ICX Bone Level (BL) implants.
Article-No.
length
C-001-390080 ICX Ø 3.75 x 8mm (pack of 6)
C-001-390100 ICX Ø 3.75 x 10mm (pack of 6)
C-001-390125 ICX Ø 3.75 x 12.5mm (pack of 6)
C-001-390150 ICX Ø 3.75 x 15mm (pack of 6)
Article-No.
length
Article-No.
length
I M P L ANT S
ICX IMPLANTS/PACK OF 6
length
C-001-345080 ICX-plus Ø 3.45 x 8mm (pack of 6)
C-001-345100 ICX-plus Ø 3.45 x 10mm (pack of 6)
C-001-345125 ICX-plus Ø 3.45 x 12.5mm (pack of 6)
Article-No.
length
T-001-375080 ICX Premium TissueLine Implant Ø 3.75 x 8mm (pack of 6) NEW!
T-001-375100 ICX Premium TissueLine Implant Ø 3.75 x 10mm (pack of 6) NEW!
T-001-375125 ICX Premium TissueLine Implant Ø 3.75 x 12.5mm (pack of 6) NEW!
Article-No.
length
T-001-480065 ICX Premium TissueLine Implant Ø 4.8 x 6.5mm (pack of 6) NEW! L=2.6mm
ICX IMPLANTS/PACK OF 6
All ICX-ACTIVE MASTER TISSUE LEVEL implants are only available in packs of 6.
Please note
when ordering prosthetic abutments with GH 0mm:
ICX-Tissue Level (TL) implants have - due to the tulip - a different platform
as the ICX Bone Level (BL) implants.
Article-No.
length
TAM-001-375080 ICX Active Master TissueLine Implant Ø 3.75 x 8mm (Pack 0f 6) NEW!
TAM-001-375100 ICX Active Master TissueLine Implant Ø 3.75 x 10mm (Pack 0f 6) NEW!
TAM-001-375125 ICX Active Master TissueLine Implant Ø 3.75 x 2.5mm (Pack 0f 6) NEW!
TAM-001-425080 ICX Active Master TissueLine Implant Ø 4.1 x 8mm (Pack 0f 6) NEW!
TAM-001-425100 ICX Active Master TissueLine Implant Ø 4.1 x 10mm (Pack 0f 6) NEW!
TAM-001-425125 ICX Active Master TissueLine Implant Ø 4.1 x 12.5mm (Pack 0f 6) NEW!
NEW!
length
I M P L ANT S
I C X-S i n g l e - I m p l a n t s
ICX-SINGLE-Implants
incl. sterile closing cap
length
S-001-345100 ICX-plus Ø 3.45 x 10mm
S-001-345125 ICX-plus Ø 3.45 x 12.5mm
Article-No.
length
S-001-390080 ICX Ø 3.75 x 8mm
S-001-390100 ICX Ø 3.75 x 10mm
S-001-390125 ICX Ø 3.75 x 12.5mm
S-001-390150 ICX Ø 3.75 x 15mm
Ø 4.1mm
Article-No.
Note:
medentis medical offers you instruction manuals on the following website: ifu.medentis.de
There you can find the manuals for use by entering the article number or retrieve the currently valid instructions for use
of the product groups. The prerequisite is an Internet-capable end device at which PDF documents can be opened.
If you would like to have the paper version of the instructions for use, please contact us and we will send it to you with UPS Express
Saver free of charge by noon on the next working day. Alternatively, the user manual can also be faxed or sent by e-mail.
ICX-plus-parallel drill
C-014-007345
hard Ø 3.45 yellow III l
ICX parallel drill
C-014-003375
soft Ø 3.75 red I l
ICX parallel drill
C-014-006375
standard Ø 3.75 red II l
I CX-D R I LLS
ICX-PREMIUM PARALLEL AND STOP DRILLS
15.0mm
12.5mm
10.0mm
Explanation: 8.0m.
Grooves in the drill 6,5mm
stand for depth
of the respective hole.
0.3mm
ICX Standard
ICX Standard ICX Active
ICXMaster
Active Master
Parallelbohrer
Parallelbohrer Parallelbohrer
Parallelbohrer
ICX-PREMIUM ICX-ACTIVE-MASTER
Parallel drill Parallel drill
15 15 15 15
10 10 10 10
8 8 8 8
6,50 6,50
2,80
2,80
1,50
1,50
0 0 0 0
0,30
0,30
0,30
0,30
g g
Service-Tel.: +49 (0)2641 9110-05:1· www.medentis.de
5:1 Maßstab: Maßstab: Gewicht: Gewicht:
Werkstoff: Werkstoff: Darstellung: Darstellung: 31
Name Datum
Name Bezeichnung:
Datum Bezeichnung:
OVERVIEW:
I M P L ANT S
I C X- AC T I V E - M A S T E R I M P L A N T S
length
ACM-001-390080 ICX-ACTIVE-MASTER Ø 3.75 · L 8mm (Pack of 6)
ACM-001-390100 ICX-ACTIVE-MASTER Ø 3.75 · L 10mm (Pack of 6)
ACM-001-390125 ICX-ACTIVE-MASTER Ø 3.75 · L 12.5mm (Pack of 6)
ACM-001-390150 ICX-ACTIVE-MASTER Ø 3.75 · L 15mm (Pack of 6)
length
ACM-001-425080 ICX-ACTIVE-MASTER Ø 4.1 · L 8mm (Pack of 6)
ACM-001-425100 ICX-ACTIVE-MASTER Ø 4.1 · L 10mm (Pack of 6)
ACM-001-425125 ICX-ACTIVE-MASTER Ø 4.1 · L 12.5mm (Pack of 6)
ACM-001-425150 ICX-ACTIVE-MASTER Ø 4.1 · L 15mm (Pack of 6)
Article-No. Ø 4.8mm
length
ACM-001-480100 ICX-ACTIVE-MASTER Ø 4.8 · L 10mm (Pack of 6)
ACM-001-480125 ICX-ACTIVE-MASTER Ø 4.8 · L 12.5mm (Pack of 6)
ACM-001-480150 ICX-ACTIVE-MASTER Ø 4.8 · L 15mm (Pack of 6)
I CX-D R I LLS
ICX-ACTIVE-MASTER DRILLS
ICX-ACTIVE-MASTER
ACM-018-000006
Surgery Box (filled)
Step 1 from 3
Step 2 from 3 Step 3 from 3
ICX-Bonespreader-Box
Article-No. Article Material
Note: For subsequent restoration of the implants with adhesive bases, cast-on abutments and CERICX abutments, see page 16.
ICX-cover screw,
C-003-000002 GH 0mm Titanium
sterile (Pack of 6)
ICX-cover screw, blue,
C-003-000021 GH 2mm Titanium
Ø 3.1mm
ICX-cover screw, blue,
C-003-000022 GH 0.5mm Titanium
Ø 3.75mm
ICX healing cap bottle size GH 2mm
C-004-444720 Titanium Ø 4.7/3.9mm
Ø 4.7/3.9mm L 3.5mm
ICX healing cap bottle size GH 3mm
C-004-444730 Titanium
Ø 4.7/3.9mm L 4.5mm
ICX healing cap bottle size GH 4mm
C-004-444740 Titanium
Ø 4.7/3.9mm L 5.5mm
ICX healing cap bottle size GH 5mm
C-004-444750 Titanium
Ø 4.7/3.9mm L 6.5mm
ICX healing cap
C-004-004510 GH 1mm Titanium
Ø 4.7mm
ICX healing cap
C-004-004520 GH 2mm Titanium Ø 4.7mm
Ø 4.7mm
ICX healing cap
C-004-004530 GH 3mm Titanium
Ø 4.7mm
ICX healing cap
C-004-004540 GH 4mm Titanium
Ø 4.7mm
ICX healing cap
C-004-004550 GH 5mm Titanium
Ø 4.7mm
ICX healing cap
C-004-004560 GH 6mm Titanium
Ø 4.7mm
ICX healing cap
C-004-006020 GH 2mm Titanium
Ø 6mm
Ø 6mm
ICX healing cap
C-004-006030 GH 3mm Titanium
Ø 6mm
ICX healing cap
C-004-006040 GH 4mm Titanium
Ø 6mm
ICX healing cap
C-004-006050 GH 5mm Titanium
Ø 6mm
ICX healing cap
C-004-006060 GH 6mm Titanium
Ø 6mm
Note: The tightening torque of 5 to 10Ncm should not be exceeded. Please screw in all ICX cover and healing caps by hand only. If you
screw them in with 20 or more Ncm, there is a risk that conical forces will be created, which will make it almost impossible to loosen them
later. Hinweis: L = Length From implant top edge
GH = Gingiva height
Healing cap
only for TISSUE LEVEL (TL) Ø 5mm PEEK,
C-004-034550
Implants L 5mm sterilizable
rotation-locked
All articles incl. connection screw All articles on this page incl. laboratory screw
C-011-000001 C-007-000002
ICX-TL-Healing cap
NEW Ø 5mm
conical Titanium
C-004-245010 1mm GH
ICX-TL-Healing cap
NEW Ø 5mm
conical Titanium
C-004-245020 2mm GH
ICX-TL-Healing cap
NEW Ø 5mm
conical Titanium
C-004-245030 3mm GH
ICX-TL-Healing cap
NEW Ø 5mm
conical Titanium
C-004-245040 4mm GH
Article:
ICX-TL-Healing cap conical
- one-piece
MODEL ANALOG
ICX MODEL ANALOG
Note: L = Length
THE FAIR
PREMIUM
IMPLANT-
SYSTEM.
All articles C-007- incl. connection screw All articles on this page incl. laboratory screw
C-007-000001 C-007-000002
GH
ICX-Titanium abutment,
Ø 3.7mm extralong, Ø 3.7mm GH 0 mm
C-007-030500 Titanium
Not for ICX-TL L 9mm
implants!
All articles C-007- incl. connection screw All articles on this page incl. laboratory screw
C-007-000001 C-007-000002
NOTE: All Aesthetic Titanium abutments are angled over the side surface of the Hexagonal Rotation Guard.
0° GH 1: 1,0mm
ICX Aesthetics Line Titanium abutment,
C-010-010010 GH 2: 3,0mm Titanium
0°
K 7mm
GH 1: 3,0mm
ICX Aesthetics Line Titanium abutment,
C-010-010030 GH 2: 5,0mm Titanium
0°
K 7mm
GH 1: 1,5mm
ICX Aesthetics Line Titanium abutment,
C-010-020015 GH 2: 3.5mm Titanium
15°
K 7mm
15°
GH 1: 2.5mm
ICX Aesthetics Line Titanium abutment,
C-010-020025 GH 2: 4.5mm Titanium
15°
K 7mm
GH 1: 3.5mm
ICX Aesthetics Line Titanium abutment,
C-010-020035 GH 2: 5.5mm Titanium
15°
K 7mm
GH 1: 5.0mm
ICX Aesthetics Line Titanium abutment,
C-010-020050 GH 2: 7.0mm Titanium
15°
K 7mm
GH 1: 1.5mm
ICX Aesthetics Line Titanium abutment,
C-010-040015 GH 2: 3.5mm Titanium
25°
25° K 7mm
GH 1: 2.5mm
ICX Aesthetics Line Titanium abutment,
C-010-040025 GH 2: 4.5mm Titanium
25°
K 7mm
GH 1: 3.5mm
ICX Aesthetics Line Titanium abutment,
C-010-040035 GH 2: 5.5mm Titanium
25°
K 7mm
GH 1: 5.0mm
ICX Aesthetics Line Titanium abutment,
C-010-040050 GH 2: 7.0mm Titanium
25°
K 7mm
K
GH 2 GH 1
All articles incl. connection screw All articles on this page incl. laboratory screw
C-011-000001 C-007-000002
Note: GH = Gingival height - K = Chimney height - L = Length from upper implant edge
GH 1: 0.5mm
NEW ICX Aesthetics Line Titanium abutment,
0° 15° 25° GH 2: 1.5mm Titanium
C-010-010005 0° straight, Ø 4.5mm
K 8mm
GH 1: 0.5mm
ICX Aesthetics Line Titanium abutment,
NEW GH 2: 1.5mm Titanium
15°, Ø 4.5mm
C-010-020005 K 8mm
GH 1: 0.5mm
NEW Only for ICX bone level ICX Aesthetics Line Titanium abutment, GH 2: 1.5mm Titanium
C-010-040005 Implants 25°, Ø 4.5mm
K 8mm
GH 1: 0.3mm
NEW ICX Aesthetics Line Titanium abutment,
0° 15° 25° GH 2: 1.5mm Titanium
C-024-110005 0° straight, Ø 4.5mm
K 8mm
GH 1: 0.3mm
NEW ICX Aesthetics Line Titanium abutment,
GH 2: 1.5mm Titanium
C-024-120005 15°, Ø 4.5mm
K 8mm
Only for ICX-TISSUE Level ICX Aesthetics Line Titanium abutment, GH 1: 0.3mm
NEW
Implants GH 2: 1.5mm Titanium
C-024-140005 25°, Ø 4.5mm
K 8mm
K
GH 2 GH 1
Note: GH = Gingival height - K = Chimney height - L = Length from upper implant edge
All articles incl. connection screw All articles on this page incl. laboratory screw
C-011-000001 C-007-000002
Note: GH = Gingival height Note: Tightening torque 30Ncm. The solid abutment shouldn‘t be
K = Chimney height
loosened after the impression has been taken. For preparation in situ.
L = Length from upper implant edge
ICX-Universal-Abutment,
C-009-100002 long, L 14,5mm Titanium
5.2mm
ICX-Meso-Abutment
C-009-020001 L 9mm Titanium
7mm
AB U TM E NT S
ICX BAR, GOLD AND PLASTIC ABUTMENTS
ICX–Bar-System-Abutments
Article-No. Article Dimensions Material
L 9mm
Plastic abutment Plastic
C-011-030001 K 6.3mm
with hex burnable
4.5mm
L 9mm
Plastic abutment Plastic
C-011-030002 K 6.3mm
without hex burnable
4.5mm
L 9mm
Titanium abutment
C-011-020002 K 6.3mm Titanium
with hex
4.5mm
Note: GH = Gingival height - K = Chimney height - L = Length from upper implant edge
All articles incl. connection screw All articles incl. laboratory screw
C-011-000001 C-007-000002
GH 0mm
ICX-plus-(TL) Implant abutment (outer
C-024-120501 tulips ) Titanium
K 7mm, long, 5mm
K 7mm
The CAD/CAM data sets for the ICX adhesive bases are stored in the library on our medentis website:
www.medentis.de
There they can be requested by email for downloading.
All articles incl. connection screw All articles incl. laboratory screw
C-011-000001 C-007-000002
THE FAIR
PREMIUM
IMPLANT-
SYSTEM.
ICX-Cerec®-Scanpost L
GH 2.5mm
for C-029-000050
C-030-000052 K 4.65mm Titanium
with hex
4.5mm
incl. scan cap white (Bluecam)
ICX-Cerec®-Scanpost L
for C-029-000051 GH 4mm
C-030-000053 with hex K 4.65mm Titanium
incl. scan cap white (Bluecam), 4.5mm
Note: GH = Gingival height - K = Chimney height - L = Length from upper implant edge
All articles incl. connection screw All articles incl. laboratory screw
C-011-000001 C-007-000002
THE CORRESPONDING CAD/CAM DATA RECORD IS STORED IN THE SIRONA® SYSTEM AS DATA
RECORD NB A 4.5.
Note: K = Length of the stump All articles incl. connection screw All articles incl. laboratory screw
from prep limit C-011-000001 C-007-000002
0° degrees and 15° degrees - with optimized prep limit for intraoral scanning systems
and Cerec® scans - in three tooth colours and 5 gingiva heights:
depth: 5.8mm
Tiefe: Ø 5,8mm
width:
Breite:ØØ5.5mm
5,5mm
3,1mm
GH 2:
1,2mm
Width: Ø 5.5mm
GH 1:
C E R I C X-A b u t m e n t s
Article-No. Article Dimensions Material
Width: Ø 5.5mm
Depth: Ø 5.8mm
C-036-A/B/C CERICX abutment Titanium/
GH 1: 1.2mm
10501 straight 1mm GH 2: 3.1mm Zirconium A = Tooth colours „bright
K: 6.5mm
Width: Ø 5.5mm
Depth: Ø 5.8mm
C-036-A/B/C CERICX abutment Titanium/
GH 1: 2.2mm
10502 straight 2mm GH 2: 4.1mm Zirconium
K: 6.5mm
B = Tooth colours „standard
Width: Ø 5.5mm
Depth: Ø 5.8mm
C-036-A/B/C CERICX abutment Titanium/
GH 1: 3.2mm
10503 straight 3mm GH 2: 5.1mm Zirconium
K: 6.5mm
Width: Ø 5.5mm
Depth: Ø 5.8mm
C-036-A/B/C CERICX abutment Titanium/
GH 1: 4.2mm C = Tooth colours „dark
10504 straight 4mm GH 2: 6.1mm Zirconium
K: 6.5mm
Width: Ø 5.5mm
Depth: Ø 5.8mm
C-036-A/B/C CERICX abutment Titanium/
GH 1: 5.2mm
10505 straight 5mm GH 2: 7.1mm Zirconium
K: 6.5mm
Width: Ø 5.5mm
CERICX Depth: Ø 7.2mm
C-036-A/B/C Titanium/
15° GH 1: 1.2mm
20005 GH 2: 3.2mm Zirconium
Aesthetics 0.5mm A = Tooth colours „light
K: 7mm
Width: Ø 5.5mm
CERICX Depth: Ø 7.2mm
C-036-A/B/C Titanium/
15° GH 1: 2.2mm
20015 GH 2: 4.2mm Zirconium
Aesthetics 1.5mm
K: 7mm
Width: Ø 5.5mm
CERICX Depth: Ø 7.2mm
C-036-A/B/C Titanium/
15° GH 1: 4.2mm
20035 GH 2: 6.2mm Zirconium C = Tooth colours „dark
Aesthetics 3.5mm
K: 7mm
Width: Ø 5.5mm
CERICX Depth: Ø 7.2mm
C-036-A/B/C Titanium/
15° GH 1: 5.2mm
20045 GH 2: 7.2mm Zirconium
Aesthetics 4.5mm
K: 7mm
0° degre and 15° degrees - with optimized prep limit for intraoral scanning systems and Cerec®
scans -. in three tooth shades and 5 gingiva heights:
GH short 0.5mm
17° ICX-MULTI abutment,
C-020-751705 GH long 1.9mm Titanium
rotation-locked in implant
K 2.2mm
GH short 1.5mm
17° ICX-MULTI abutment,
C-020-751715 GH long 2.9mm Titanium
rotation-locked in implant
K 2.2mm
GH short 3.5mm
17° ICX-MULTI abutment,
C-020-751735 GH long 4.9mm Titanium
rotation-locked in implant
K 2.2mm
GH short 0.5mm
35° ICX-MULTI abutment,
C-020-753505 GH long 3.25mm Titanium
rotation-locked in implant
K 2.2mm
GH short 1.5mm
35° ICX-MULTI abutment,
C-020-753515 GH long 4.25mm Titanium
rotation-locked in implant
K 2.2mm
GH short 3.5mm
35° ICX-MULTI abutment,
C-020-753535 GH long 6.25mm Titanium
rotation-locked in implant
K 2.2mm
K
K Note: GH = Gingival height incl. base screw C-020-000010 GH long
GH K = Chimney height GH short
(connection screw to the implant)
I C X- M U LT I
I C X- M U LT I ® - C o n z e p t = 4 - O N - I C X a n d 6 - O N - I C X
Ø 4.8
C-003-000005 ICX-MULTI protection cap Titanium
L 4.6mm
L 11mm
C-006-010007 ICX-MULTI model analog Titanium
K 2.2mm
Ø 4.8
ICX-MULTI prosthetic abutment, L 12mm
C-020-951120 Titanium
Titanium (shortenable to
4.1mm)
Ø 4.8
ICX-MULTI prosthetic abutment, L 12mm Plastic
C-020-952120
Plastic (shortenable to burnable
4.1mm)
Ø 4.8
ICX-MULTI prosthetic abutment
L 12mm
C-020-953120 Peek Peek
(shortenable to
(temporary restoration/bite registration)
4.1mm)
L 12.5mm
C-030-000010 ICX-MULTI scan cap B 4.5mm Peek
T 6.5mm
Multifixing pin
C-020-000120 Pack of 1o Plastic
for relining impressions
I C X- M U LT I ® - C o n z e p t = 4 - O N - I C X a n d 6 - O N - I C X
m u l t i ®
IC X-
I C X-S h o p: w w w. m e d e nt i s .d e
Patrices
THE FAIR
PREMIUM
IMPLANT-
SYSTEM.
I C X- S h o p : w w w. m e d e n t i s . d e
T- B O N A- SY S T E M
ICX-T-BONA BALL HEAD SYSTEM
t- e c co/M a t r i ce
Article-No. Article Material
t-ecco, matrice, complete,
Titanium
incl. golden inner matrice,
T-13825 plus
red plastic auxiliary ring
AuPt
and model analog
Titanium
T-13845 t-ecco, red inner matrice (strong)
Grad5
Activation
Stainless
T-10571 t-ecco-activator/deactivator
steel
Deactivation
Hex tool,
Stainless
960002 SW 0.9 short,
steel
L 20mm
Hex tool,
Stainless
C-015-100029 SW 0.9 long, one-piece
steel
L 35mm
D a l b o ® - P LU S/M a t r i ce
Article-No. Article Material
Dalbo PLUS Female TE set elliptical Titanium
DP-055890 Complete
+ incl. Dalbo PLUS lamella insert
plus
Elitor
Note: Please be sure to use the Dalbo-PLUS tool (DP-072609) to adjust the retention individually according to the situation.
Patrices
Please note: GH
With an exact gingival height of e.g. 1mm, an additional distance of 0.5mm remains
between the occlusal gingiva and the lower edge of the matrix restoration.
The one-piece & two-piece ICX Maximus abutments are a proprietary further development Note: GH = gingival height
of medentis medical, compatible with the Locator™ abutments. Available for all ICX implants!
THE FAIR
PREMIUM
IMPLANT-
SYSTEM.
I C X- S h o p : w w w. m e d e n t i s . d e
MAXIMUS-ABUTMENTS
ICX MAXIMUS ABUTMENTS, TWO-PIECE
ICX-Maximus–Aufbau,
C-031-010004 with hex, two-part GH 4mm Titanium
incl. connection screw
The one-piece & two-piece ICX Maximus abutments are a proprietary further development Article incl. connection screw
of medentis medical, compatible with the Locator™ abutments. Available for all ICX implants! C-031-000001
Note: It is inserted with 1.4mm hexagon insertion tool
ICX-Maximus
C-031-000001 Titanium Grad 5
Connection screw
Matrices
I C X M a x i m u s A c ce s s o r i e s :
Article-No. Article Material
Retention insert transparent
Plastic
C-031-852400 Pull-off force approx. 2.3 kg, strong
(pack of 4)
divergence compensation ± 10°
Processing package
Titanium/
(titanium cap with black
C-031-851902 Kunststoff
laboratory insert, spacer ring
(2er Pack)
and retention inserts)
Processing package
Titanium/
(titanium cap with black
C-031-851910 Plastic
laboratory insert, spacer ring
(pack of 10)
and retention inserts)
Titanium
C-031-850501 Impression cap
(pack of 4)
The one, & two-piece ICX Maximus abutments are a proprietary development of medentis medical,
compatible with the Locator™ abutments. Available for all ICX implants!
Products marked with ® and ™ are registered trademarks of the respective manufacturer.
C M L O C ® M a t r i ce s Sy s t e m
Article-No. Article Material
CM LOC® Multi-Tool
07000205
(mandatory required)
System advantages:
+ Simple practitioner- and patient-friendly application.
+ Easy replacement of the Pekkton® retention inserts.
+ Highly resistant to water absorption and taste deformation.
+ Optimized matrix design with Pekkton® retention inserts for high wear resistance.
The matrix design with retention inserts made of the high-performance polymer Pekkton® offers a
good wear resistance, which enables restoration with ICX-MAXIMUS abutments.
The CM LOC® matrices are available with four easily exchangeable retention inserts in four defined
force levels. The gingiva-colored matrice provides esthetic solutions.
REFERRAL BOX
ICX REFERRAL BOX INSTRUMENTS
I C X-S h o p: w w w. m e d e nt i s .d e
THE FAIR
PREMIUM
IMPLANT-
SYSTEM.
ICX-other accessories
Article-No. Article Material
Counter tool for ICX-MINI implant
C-015-100009 Stainless steel
SW 2.8mm
ICX parallel pin ø 2.3/Ø 3.15
C-014-230315 Titanium
for checking the drill-holes
ICX parallel pin Ø 3.5/Ø 4.1
C-014-350410 Titanium
For checking the drill-holes
ICX bone profiler, (ISO shaft) Ø 3.45 - Ø 4.8
C-014-006002 for uncovering overgrown Stainless steel
implants
ICX-Surgical Driver,
C-015-100020 Stainless steel
for instruments with ISO shaft
For better identification, we will deliver this screw anodized RED in the future.
ICX-Maximus-
C-031-000001 Titanium
connection screw
Cover screws
Healing abutment
Impression post
Plastic abutment
TORQUES
max. 15 Ncm
Scanbody
and
all other abutments
made of PEEK
max. 30 Ncm
All titanium
abutments
Adhesive
bases
CERICX
Ball head
Maximus
ICX-MULTI
abutments
TORQUES
ICX-Implants
General insertion:
and
Immediate load:
ICX-ACTIVE MASTER
-Implants
In the interforaminal
area
not more than
40Ncm
BL
+
ICX-Ø 3.3mm (Bone Level)
Ø 3.3mm
Art.-No.: N-006-010003
+ ICX-Ø 3.3mm
Ø 3.3mm
TL (Tissue Level)
Art.-No.: N-006-010008
Art.-No.: C-006-010001
Art.-No.: C-006-010008
Dear customers,
please note the two different implant platforms (BL and TL) for the transfer.
Select the BL and TL laboratory analogs accordingly.
This is important if the prosthetics later has to touch the different platforms
of the implants, due to the low emergence profile (GH 0mm).
Your medentis team
BLANKS
ICX BLANKS
ICX-System®
(MED-Connection)
Medentika®
(MDK-Connection)
Simply scan
and order our preforms
in the ICX Online shop!
Amann Girrbach®
(AGH-Connection)