Professional Documents
Culture Documents
X8-E Speedometer Button Function Manual
X8-E Speedometer Button Function Manual
statement: 1. In the general interface, hold down the “SET”, the hour will
flash. At this time you could adjust the hour. Short press the “SET” could
adjust the minute/metric system and turn to the general interface.
2. The speedometer will show the general interface when there is no
operation within 5 seconds.
Note:number of pulses when the wheel turn a circle= the motor pole pairs
The front three are digits, the 5 is flashing
ignore the speed point 0
500 represents the tire circumference of each Hall signal, used to adjust the
speed
96 is the voltage, can adjust the applicable battery voltage
Since the non-hub motor may have a speed ratio,so when you actually use it,
just adjust this number to make the display speed matches the actual speed.