Professional Documents
Culture Documents
Brake Shoes 966c
Brake Shoes 966c
Brake Shoes 966c
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966C WHEEL LOADER 76J
Configuration: 966C WHEEL LOADER 76J00001-06388 (MACHINE)
Brake Shoes
SMCS - 4253-11; 4253-12
2. Use an acceptable brake tool to remove springs (2) from the brake shoes.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 7/4/2023
966C WHEEL LOADER 76J00001-06388 (MACHINE)(UE070090 - 00) - Documentation Page 2 of 3
3. Remove lockwire (5). Loosen bolts (3) approximately .50 in. (12.7 mm).
6. Remove pins (6). Remove brake shoes (8). Remove springs, retainers and felt washers from the
other end of pins (6).
1. Install the felt washers, retainers and springs on one end of pins (2).
2. Put brake shoes (3) in position on the spider and bearing assembly and install pins (2).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 7/4/2023
966C WHEEL LOADER 76J00001-06388 (MACHINE)(UE070090 - 00) - Documentation Page 3 of 3
5. Tighten bolts (4). Make sure the holes in the pins are in alignment with the bolts before the bolts
are tightened.
6. Use an acceptable brake tool (6) to install springs (7) on the brake shoes.
NOTE: After the final drive ring gears and hubs have been installed, make an adjustment to the
brakes. See BRAKE ADJUSTMENT, 966C AIR SYSTEM AND BRAKES.
end by:
Copyright 1993 - 2023 Caterpillar Inc. Fri Apr 7 17:16:50 UTC-0400 2023
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 7/4/2023