Professional Documents
Culture Documents
Alternador 966c
Alternador 966c
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966C WHEEL LOADER 76J
Configuration: 966C WHEEL LOADER 76J00001-06388 (MACHINE)
Alternator
SMCS - 1405-11; 1405-12
Remove Alternator
1. Open the access door over the engine on the left side of the machine. Remove the lower panel.
3. Loosen bolt (1) and the bolt that holds the alternator to bracket (5). Remove vee belts (2) from the
alternator pulley.
4. Remove bolt (1) and the bolt and nut that hold the alternator to bracket (5) to remove the alternator
from the engine.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 7/4/2023
966C WHEEL LOADER 76J00001-06388 (MACHINE)(UE070090 - 00) - Documentation Page 2 of 2
Install Alternator
1. If a new pulley has been installed on the alternator shaft, tighten the nut that holds it to the correct
torque given in SPECIFICATIONS.
2. Put the alternator in position and install the bolts and nut to hold it hand tight.
4. Use a belt tension gauge such as Borroughs Tool Company Part No. BT-33-72C or an equivalent
and make an adjustment of vee belts (1). Measure the belt nearest the radiator. Tighten new belts until
the gauge indication is 120 ± 5. Tighten the bolts that hold the alternator in position. Operate the
engine at high idle for a minimum of 30 minutes after Step 5. Make another adjustment of the belt
tension. The correct gauge indication for used belts is 90 ± 10.
5. Connect electric wires (2) and (3) to the alternator. Tighten the terminal nuts to the torque given in
SPECIFICATIONS.
6. Install the lower panel and close the access door over the engine.
Copyright 1993 - 2023 Caterpillar Inc. Fri Apr 7 17:30:51 UTC-0400 2023
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/m... 7/4/2023