Professional Documents
Culture Documents
PCM Connector End View: PCM Terminal Voltage Table (Reference)
PCM Connector End View: PCM Terminal Voltage Table (Reference)
PCM Connector End View: PCM Terminal Voltage Table (Reference)
Connected Voltage
Terminal Signal Test condition Inspection item
to (V)
1A - - - - -
Below Starter
Switch the ignition to off
Starter 1.0 relay
1B relay Starter relay Related
control Below wiring
Switch the ignition to ON harness
1.0
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 1/14
5/31/22, 9:11 PM Printer Friendly View
1C - - - - -
Approx.
Clutch pedal depressed CPP switch
1.5
Clutch Related
1D CPP switch
operation wiring
Clutch pedal released B+ harness
1E - - - - -
1F - - - - -
1G - - - - -
Below
A/C operating A/C relay
1.0
Related
11 A/C A/C relay Idle
wiring
A/C not
B+ harness
operating
1J - - - - -
1K - - - - -
1L - - - - -
1O - - - - -
Related
MAF sensor MAF/IAT Below
1P Under any condition wiring
ground sensor 1.0
harness
APP sensor
APP sensor Approx. Related
1Q APP sensor Switch the ignition to ON
voltage 5.0 wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 2/14
5/31/22, 9:11 PM Printer Friendly View
1R - - - - -
Approx.
Shift lever is at neutral position Neutral
1.5
switch
Neutral
1S Neutral switch Related
position Shift lever is not at neutral
B+ wiring
position harness
1T - - - - -
APP sensor
APP sensor Below Related
1U APP sensor Under any condition
ground 1.0 wiring
harness
1V - - - - -
Cruise
Related
control Cruise control Below
1W Under any condition wiring
switch switch 1.0
harness
ground
1X - - - - -
When the
accelerator Approx.
pedal is 0.4 APP sensor
APP sensor APP sensor Switch the released Related
1Y
(No. 1) No. 1 ignition to ON When the wiring
accelerator Approx. harness
pedal is 3.4
depressed
1Z - - - - -
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 3/14
5/31/22, 9:11 PM Printer Friendly View
1AD - - - - -
Fan control
Inspect using the wave profile. (See module
Fan control Fan control
1AE INSPECTION USING AN Related
module module
OSCILLOSCOPE (REFERENCE)). wiring
harness
1AF - - - - -
1AH - - - - -
Related
Constant Approx.
1AJ APP sensor Switch the ignition to ON wiring
voltage 5.0
harness
Approx. MAF/IAT
Switch the ignition to ON
0.7 sensor
MAF/IAT
1AK MAF Related
sensor
Approx. wiring
Idle harness
1.3
1AL - - - - -
1AN - - - - -
1AO - - - - -
1AP - - - - -
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 4/14
5/31/22, 9:11 PM Printer Friendly View
Related
SET/- switch Approx.
wiring
pressed in 2.4
harness
RES/+ switch Approx.
pressed in 3.9
ON switch Approx.
pressed in 4.3
Approx.
Except above
4.7
MAF/IAT
sensor, fuel Related
IAT sensor Below
1AR tank pressure Under any condition wiring
ground 1.0
sensor, ECT harness
sensor No. 2
1AU - - - - -
Related
APP sensor Below
1AV APP sensor Under any condition wiring
ground 1.0
harness
Generator
Generator Inspect using the wave profile. (See
Generator Related
1AW field coil INSPECTION USING AN
(terminal D) wiring
control OSCILLOSCOPE (REFERENCE)).
harness
Generator
Generator Inspect using the wave profile.
Generator Related
1AX output (See
INSPECTION USING AN
(terminal P) wiring
voltage OSCILLOSCOPE (REFERENCE)).
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 5/14
5/31/22, 9:11 PM Printer Friendly View
harness
Related
Below
1AZ Ground Ground Under any condition wiring
1.0
harness
Battery
Back-up Battery
Related
1BA power (positive Under any condition B+
wiring
supply terminal)
harness
Related
Below
1BB Ground Ground Under any condition wiring
1.0
harness
1BC - - - - -
Related
Below
1BD Ground Ground Under any condition wiring
1.0
harness
Below
Switch the ignition to off Related
Power 1.0
1BE Main relay wiring
supply
harness
Switch the ignition to ON B+
Below
Switch the ignition to off Related
Power 1.0
1BF Main relay wiring
supply
harness
Switch the ignition to ON B+
Related
Below
1BG Ground Ground Under any condition wiring
1.0
harness
Related
Below
1BH Ground Ground Under any condition wiring
1.0
harness
Throttle
Throttle valve
Throttle body
valve actuator
2A (throttle valve Switch the ignition to ON B+
actuator Related
actuator)
control (+) wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 6/14
5/31/22, 9:11 PM Printer Friendly View
A/F sensor
A/F sensor Inspect using the wave profile. (See
A/F sensor Related
2C heater INSPECTION USING AN
heater wiring
control OSCILLOSCOPE (REFERENCE)).
harness
HO2S
HO2S heater
2D heater HO2S heater Idle (after warm up) B+ Related
control wiring
harness
Approx.
Switch the ignition to ON Spill valve
High pressure 9.2
control
High fuel pump
solenoid
pressure (Spill valve
2F valve
fuel pump control Approx.
Idle Related
control (+) solenoid 9.5 wiring
valve)
harness
Related
Below
2H Ground Body ground Under any condition wiring
1.0
harness
Below
Switch the ignition to off HO2S
1.0
Sensor Related
21 HO2S
ground wiring
Approx.
Switch the ignition to ON harness
1.5
2J - - - - -
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 7/14
5/31/22, 9:11 PM Printer Friendly View
2L - - - - -
Related
Sensor Below
2M A/F sensor Under any condition wiring
ground 1.0
harness
Boost air
IAT 20°C {68°F} 2.4E.6
temperature
MAP/boost air
Boost air Switch the sensor
2N temperature
temperature ignition to ON Related
sensor
wiring
IAT 30°C {86°F} 1.7E.9
harness
OCV
OCV Related
2O OCV Switch the ignition to ON B+
control wiring
harness
Fuel
pressure
Sensor Fuel pressure Below sensor
2P Under any condition
ground sensor 1.0 Related
wiring
harness
HO2S
Related
2Q HO2S HO2S Idle 0E
wiring
harness
Below
Switch the ignition to off Fuel
1.0
pressure
Fuel
Fuel pressure Approx. sensor
2R pressure Switch the ignition to ON
sensor 1.4 Related
sensor
wiring
Approx. harness
Idle
1.4
CMP
Inspect using the wave profile. sensor
2S CMP CMP sensor (See
INSPECTION USING AN Related
OSCILLOSCOPE (REFERENCE)). wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 8/14
5/31/22, 9:11 PM Printer Friendly View
2T - - - - -
CKP sensor
Inspect using the wave profile. (See
Related
2W CKP CKP sensor INSPECTION USING AN
wiring
OSCILLOSCOPE (REFERENCE)).
harness
KS, CMP
sensor, CKP Related
Internal Below
2X sensor, A/F Under any condition wiring
ground 1.0
sensor, TP harness
sensor
A/F sensor
A/F sensor
Approx. Related
2Y calibration A/F sensor Switch the ignition to ON
1.5 wiring
resistor
harness
A/F sensor
A/F sensor
Approx. Related
2Z power A/F sensor Idle (after warm up)
4.0 wiring
supply
harness
Wastegate
control
Wastegate
Wastegate Inspect using the wave profile. solenoid
control
2AA control (See
INSPECTION USING AN valve
solenoid
solenoid valve OSCILLOSCOPE (REFERENCE)). Related
valve
wiring
harness
Purge
solenoid
Purge Inspect using the wave profile. (See
Purge valve
2AB solenoid INSPECTION USING AN
solenoid valve Related
valve OSCILLOSCOPE (REFERENCE)).
wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 9/14
5/31/22, 9:11 PM Printer Friendly View
2AC A/F sensor A/F sensor Idle (after warm up) Approx. A/F sensor
VSIP 3.6 Related
wiring
harness
A/F sensor
A/F sensor Approx. Related
2AD A/F sensor Idle (after warm up)
IP+ 3.5 wiring
harness
Below Variable
Variable variable swirl shutter valve close swirl shutter
Variable swirl 1.0
swirl shutter valve switch
2AE shutter valve
valve Related
switch
monitor wiring
variable swirl shutter valve open B+ harness
OCV valve
Inspect using the wave profile.
OCV Related
2AF OCV (See
INSPECTION USING AN
control wiring
OSCILLOSCOPE (REFERENCE)).
harness
Approx. MAP
Switch the ignition to ON
Manifold 1.9 sensor
2AG absolute MAP sensor Related
pressure Below wiring
Idle (after warm up) harness
1.0
2AI - - - - -
TP sensor
TP sensor Below Related
2AJ TP sensor Under any condition
ground 1.0 wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 10/14
5/31/22, 9:11 PM Printer Friendly View
NOTE:
TP sensor
Constant
Approx. Related
2AO voltage TP sensor Switch the ignition to ON
5.0 wiring
(Vref)
harness
2AP ECT (No. 2) ECT sensor Switch the ECT 20°C 3.04-
No. 2 ignition to ON {68°F} 3.14 ECT sensor
No. 2
ECT 60°C 1.29E.39 Related
{140°F} wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 11/14
5/31/22, 9:11 PM Printer Friendly View
Below
Switch the ignition to ON EGR valve
EGR valve 1.0
Related
2AQ #1 coil EGR valve
wiring
control Below
Idle harness
1.0
Ignition coil
Ignition coil Inspect using the wave profile. No. 4
2AT IGT4 (No. 4 (See
INSPECTION USING AN Related
cylinders) OSCILLOSCOPE (REFERENCE)). wiring
harness
Constant Related
Approx.
2AU voltage MAP sensor Switch the ignition to ON wiring
5.0
(Vref) harness
Related
Sensor Below
2AV MAP sensor Under any condition wiring
ground 1.0
harness
Ignition coil
Ignition coil Inspect using the wave profile. No. 2
2AW IGT2 (No. 2 (See
INSPECTION USING AN Related
cylinders) OSCILLOSCOPE (REFERENCE)). wiring
harness
Ignition coil
Ignition coil Inspect using the wave profile. No. 3
2AX IGT3 (No. 3 (See
INSPECTION USING AN Related
cylinders) OSCILLOSCOPE (REFERENCE)). wiring
harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 12/14
5/31/22, 9:11 PM Printer Friendly View
Related
wiring
harness
Fuel
injector No.
Fuel Inspect using the wave profile. (See
Fuel injector 4
2AZ injection (-) INSPECTION USING AN
(No. 4) Related
(#4) OSCILLOSCOPE (REFERENCE)).
wiring
harness
Ignition coil
Ignition coil Inspect using the wave profile. No. 1
2BA IGT1 (No. 1 (See
INSPECTION USING AN Related
cylinders) OSCILLOSCOPE (REFERENCE)). wiring
harness
Fuel
injector No.
Fuel Inspect using the wave profile.
Fuel injector 1
2BB injection (-) (See
INSPECTION USING AN
(No. 1) Related
(#1) OSCILLOSCOPE (REFERENCE)).
wiring
harness
Fuel
injector No.
Fuel Inspect using the wave profile.
Fuel injector 2
2BC injection (See
INSPECTION USING AN
(No. 2) Related
B(#2) OSCILLOSCOPE (REFERENCE)).
wiring
harness
Fuel
injector No.
Fuel Inspect using the wave profile. (See
Fuel injector 3
2BD injection (-) INSPECTION USING AN
(No. 3) Related
(#3) OSCILLOSCOPE (REFERENCE)).
wiring
harness
Below Fuel
Fuel Switch the ignition to off Injector
1.0
injector Fuel Injector relay
2BE
power relay Related
supply 1 wiring
Switch the ignition to ON B+ harness
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 13/14
5/31/22, 9:11 PM Printer Friendly View
Related
wiring
Switch the ignition to ON B+ harness
Fuel
injector No.
Fuel Inspect using the wave profile. (See
Fuel injector 1, No. 4
2BG injection (+) INSPECTION USING AN
(No. 1, No. 4) Related
(#1,#4) OSCILLOSCOPE (REFERENCE)).
wiring
harness
Fuel
injector No.
Fuel Inspect using the wave profile. (See
Fuel injector 2, No. 3
2BH injection (+) INSPECTION USING AN
(No. 2, No. 3) Related
(#2, #3) OSCILLOSCOPE (REFERENCE)).
wiring
harness
(1)
Without advanced keyless entry and push button start system
(2)
With advanced keyless entry and push button start system
https://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=false&hideOptions=false 14/14