Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

ENGINE

LOG
BOOK

Publication ELB-OI
Service I n f o r m a t i o n
Consult the Continental Motors web site at continentalmotors.aero for engine related news or announcements. Continental Motors Internet Service contains
useful information for Continental Motors engine owners, including electronic versions of the most current engine Instructions for Continued Airworthiness
and service bulletins that may be pertinent to your engine model.

If internet access is not available, contact our Customer Service Department at:
1-888-826-5465 Toll free in the United States or
1-251438-8299 International ,

Engine Returns
Return engines for core credit with this log book to:
Continental Motors, Inc.
2039 Broad Street
Mobile, A L 36615 U S A

Return engines for overhaul with this log book to:


Mattituck Services
410 Airway Drive
Mattituck, NY 11952 U S A

U S E O N L Y F U E L C O N F O R M I N G T O A S T M D 9 1 0
U S E O F A U T O M O T I V E F U E L I S P R O H I B I T E D

Continental Motors^ Inc.


Production Certificate 508
Printed: 8/27/2013
Test Date: 8/26/2013
This engine model T S I 0 5 5 0 C 1 4 B , serial number 1008922
was rebuilt by Continental Motors in accordance with approved
— • » H»ti tn\ imnlicti
<li'vi<rn — i ' iMr
— —rcflirirements
• 1— of Part—21
- -nf
—#1m»
Federal Aviation Regulation. T h e approved design data for this
engine incorporates all changes required by applicable
Airworthiness Directives and Continental Motors Service
Bulletins.

'/tow/
Time Since Last
Total Time
Overhaul
Engine Service and Maintenance Record
Date Record maintenance actions including engine part removal and
Hours Min Hours Min installation and compliance with inspections, Airworthiness Directives,
Sneriai insnections. Modifications and Service Bulletins

Sky Way Aircraft Inc.


Piper PA46-310P N9127Z S/N 4608059 Hobs 3742.7 Hobbs (0) 09-23-2013
TCM TSI0-550C14B S/N 1008922 (0) time rebuilt engine New Hobbs (0)
• Performed Annual inspection and found to be in an airworthy condition
• Serviced with 8qts.20WS0XC Phillips (M). Added 2qts after run in
• Installed this Engine in Piper PA46-310P S/N 4608059
• Installed Overhauled Alternator #2 P/N E3FF10300BA S/N H-M100609
• Bleed blasted all alum. Baffles, primed and painted. Installed rubber
baffles on alum, baffles and installed on engine
• Made new engine mount stainless steel exhaust shields. Installed new
P/N 84104-017 Canopy shield over exhaust cross over pipe rear of
engine
• Reinstalled propeller with new o ring gasket
• Installed new engine Lord mounts P/N J9613-55
John P Dennis A&P1693927IA

proving National A v i a T i o n I
Approving ' . T , T U n D i 7 c n n c i C A O C a-»CDTICir A T E C 3 ' FoitaJracking Number:
Authority/Country:
AUTHORIZED R E L E A S E CERTIFICATE
FAA Form 8130-3, AIRWORTHINESS APPROVAL TAG AA
FAA/'Jnited States
4. Organization/Name and Address 5. Work Order/Contract/Invoice Number:

Aero Accessories, Inc. • 1240 Springwood Avenue • Gibsonville, NC 27249 USA


FAA-PMA (PQ1206CE)
10.
Mud
Description Part Number Eligibility Quantity Serial/Batch Number Status/Work

Dry Air Pump N/A Overhauled

13. Remaps Overhauled & Tested in accordance with FAA approved data fT^^^'^^t
9 IS 14 CFR 43.9 Return To Service
14. Certifies the items identified above were manufactured in conformity to:
• Other Regulation Specified in Block 13
• Approved design data and are in a condrtion for safe operation. CerlilkM i w . n w , otriwww sceolw) 'i DUCK 13, U «ort kMnflliadtoHo« 12 mc tocOM H owe* 13 M l accom-
pliiromiccnrMnw»rt>TVoe 14 Code ol <iMeral Regiikrtoni part *3 ana H- m « K mat arork me lama w awrovad
• Non-approval design data specified in Block 13. (Of rlfcm K Mnaoa

15. Authorized Signature 16. Approval/Authorization 21. ApprovaVCertrlicate No


No. YV4R688M
17. Name (Typed or Printed): 18 Date (M / D / Y) 22. Name (Typed or Printed) «e(M/D/Yl

1 9 TOO*
User/Installer Responsibilities
11 a irxwtam 10 unOenjtarc lliet We BkWenca C* 1M Oocumenl More COMrotaulonatcalV :oroMuta autront,teratal flie wVronronent/aaaernoi,
i n a j oserfinslaflef work n accoroarce wkh tne naiona; reguawis ot an Airwonniress A jhorky d*fe~t rnan Ine Ajn.cThin«_ Aulhcray of me courrry MoaH80 in Beck 11 a essenlal thai toe wer'irBtaw ars.res H MM » » » - n a i - Ajrk-y accam oa^r
ocmconenwassentikas Iron ine Ajrwrrhkwss Ajtlxrty ok lh» courrtry aoediea r. Ckock i

FAA form 8130-3 (06-01) <ibility with applicable d

SERVICEABLE

This unit ts a stock corCit has been disassembled,


cleaned, inspected and has been Overhauled in
accordance with Manufacturer's Specifications....
Parts installed are new Date
Part Number H h 2 . C V - - y - / v

Serial Number fap5l J _____


A&P Number
A&P Nairn
Signature
Carton # 0000124616
Order # 87888
PO # ENG0033902
Continental Motors, Inc. Date Printed 9/4/2013 3:28:12PM
139 Broad S t r e e t EPN # 355417
«iobile AL 3 6 6 1 5
# S h i p V j a e || 0 W Roadway Corp. (Truck)
Gate D1
Shipping Information Customer # 85101
Account* EngineS#
Description

Ship to: SKYWAY AIRCRAFT , Bill to: AIR POWER, INC


341 8TH AVE SE HANGAR 3C 4900 SOUTH COLLINS
ST PETERSBURG, FL 33701 ARLINGTON, TX 76018
US

Item # Description QTY N/R


TSIO550C14 ENGINE - REBUILT 1 R
Serial/Lot Number(s)
1008922

It is hereby certified that all materials or parts on this shipment are in conformance with the requirements, specifications,
and/or drawings listed for the above engine model/part number.

September 04, 2013


Michael E. Ward Date
Director, Compliance

Thank you for purchasing Genuine Continental Engines and Parts!


Go Continental! Page 1 of 1
Aircraft Engine Test Verification

This document verifies that the engine model listed below has satisfactorily
completed all testing listed below in accordance with CM standard engine
testing specifications as approved by the FAA.

Engine Model R-TS^TOSSbCfH/?


Engine Serial Number / f l Q <_? 9 2 ' 2 .

Testing Completed

Standard Acceptance Test:

Date of Completion 8J2g/20 \3 Test Operator

Form No 98344 Continental M o t o r s , Inc.


1. A p p r o v i n g National A v i a t i o n . Form Tracking Number
Authority/Country: A U T H O R I Z E D R E L E A S E C E R T I F I C A T E
286885
F A A / U n i t e d States FAA F O R M 8130-3, A I R W O R T H I N E S S A P P R O V A L TAG
PC #508
4 O r g a n i z a t i o n N a m e and A d d r e s s : 5, W o r k Order/Contract/Invoice Number:
Continental Motors, 2039 B r o a d Street, Mobile, A l a b a m a 36615 "355417 ' 0000124616
6. I t e m : 7. D e s c r i p t i o n : 8. Pari N u m b e r : 9. E l i g i b i l i t y : ' 10. Q u a n t i t y : 1 1 . Serial/Batch N u m b e r : 12. Status/Work:
1 ENGINE - REBUILT TSIO550C14 N/A 1 See Block 13 See Box 13
13. R e m a r k s :
Rebuilt to original PAH's specifications in accordance with 14 CFR §43.3(j).
Total Time: 0
Preservation: This Engine was treated 08/27/13 for one hundred eighty days corrosion protection.
Senal/Baich Nunibei(s)
Serial Description
1008922 E N G I N E - REBUILT
1 4 . C e r t i f i e s the items i d e n t i f i e d a b o v e w e r e m a n u f a c t u r e d i n c o n f o r m i t y t o : ' 9 ~J 14 C F R 1 1 9 i c I 1" taMM X 1 Hlici regulation s p e c i f i e d i n B l o c k 13
j A p p r o v e d d e s i g n d a t a a n d are i n c o n d i t i o n for safe o p e r a t i o n . C e r t i f i e s thai unless o t h e i w i s e i l i l i e i l in B l o c k 1 V the w o i k identified i n B l o c k 12 a n d d e s c r i b e d i n B l o c k 13 w a s
a c c o m p l i s h e d in ; K C n i i l a t i i I- v\h 1 i l l r 1 1 ( o d e o l 1 i i l c i . i l K c j ' i i l a l i n i i s pait 4 3 a n d i n respect t o that w o r k , t h e i t e m s a i e
| N o n - a p p r o v e d d e s i g n d a t a specified i n B l o c k 1 3 .
a p p r o v e d tor r e l i i m I n s e r v i c e
1 5 A u t i i o r i z e d Signature: 16. A p p r o v a l ' A u t h o r i z a t i o n N o . : 20. A u t h o r i z e d S i g n a t u r e , / /} 2 1 . Approval/Certificate N o . :
PC #508
17. N a m e ( T y p e d o r P r i n t e d ) : 18Date(m/d/y): 22. N a m e ( T y p e d 0 1 I ' n n U ' d ) 2 3 . D a t e (m/d/y):
Daniel L. Nicholas Sep/04/2013
User/Installer Responsibilities
It is important to understand that the existence o f this document alone does not automatically constitute authority to Install the part/component/assembly.
Where the user/installer performs work in accordance with the national regulations o f an airworthiness authority different than the airworthiness authority o f the country specified in Block
1, it is essential that the user/installer ensures that his/her airworthiness authority accepts parts/components/assemblies from the airworthiness authority o f the country specified in Block 1.
Statements in Block 14 and 19 do not constitute installation certification. In all cases, aircraft maintenance records must contain an installation certification issued in accordance with the
national regulations by user/installer before aircraft may be flown.
F A A F o r m 8130-3 ( 6 - 0 1 ) * I n s t a l l e r must cross c h e c k e l i g i b i l i t y w i t h a p p l i c a b l e t e c h n i c a l data NSN-0052-00-012-9005
Customer Copy

Continental Motors, Inc.

E n g i n e Component I n f o r m a t i o n S h e e t
P r i n t e d : 8/27/2013

Serial: 1008922 Assembled: 8/24/2013


Spec: TSI0550C14B Shipped:
New/Rebuilt: REBUILT • Packed: 8/27/2013

Customer Name:
Shipping Address:

Component S e r i a l Number Component S e r i a l Number


CAMSHAFT 165620 L. TURBO H-QEL00168
CRANKSHAFT N01IA079 R. TURBO H-QEL00170
CRANKCASE R13GA217 OVERBOOST N/A
CONNROD AE13FA416 CONTROLLER H-QCD00128
CONNROD AE13FA407 WASTEGATE H-QCD00202
C r^KTNTD CSV\

A h l o r A 4 U o CYLINDER - 1 AC13DB648
CONNROD AE13FA415 CYLINDER - 2 AC13GA319
CONNROD AE13FA414 CYLINDER - 3 AC13DB682
CONNROD AE13FA408 CYLINDER - 4 AC13GA253
L MAGNETO D13HA084R CYLINDER - 5 AC13GA254
R MAGNETO D13HA069R CYLINDER - 6 AC13GA241
CARBURETOR N/A CYL FLOW CODE N/A
FUEL PUMP B13HA093R NOZZLE - 1 1515
MANIFOLD VALVE C13HA040R NOZZLE - 2 2531
METERING UNIT A13HA050R NOZZLE - 3 3531
STARTER H-U-221304 NOZZLE - 4 4531
ALTERNATOR 013GA026R NOZZLE - 5 5520
ALTERNATOR 2 N/A NOZZLE - 6 6526
DRIVE GEAR N/A OIL COOLER F13-10919-40
DRIVEN GEAR N/A PISTON WEIGHT N/A
Form QA-85A ( M A R 2012} /JCm

Pack I n s p e c t i o n Stamp \J3^


A l l o f t h e i n f o r m a t i o n provided h e r e i n i s subject t o v e r i f i c a t i o n by t h e user. Continental
M o t o r s , I n c . makes no r e p r e s e n t a t i o n o r w a r r a n t y c o n c e r n i n g t h e a c c u r a c y o r c o m p l e t e n e s s o f
t h e i n f o r m a t i o n a n d assumes no r e s p o n s i b i l i t y w i t h r e s p e c t t h e r e t o .
I. A p p r o v i n g National Aviation 3. F o r m T r a c k i n g N u m b e r :
Authority/Country:
F A A / U N I T E D STATES AUTHORIZED RELEASE CERTIFICATE H-M100609
F A A F o r m 8130-3, A I R W O R T H I N E S S A P P R O V A L T A G
4. O r g a n i z a t i o n N a m e a n d A d d r e s s : 5. W o r k O r d e r / C o n t r a c t / I n v o i c e
Number: W / 0 : M054430
HARTZELL ENGINE TECHNOLOGIES, 2900 SELMA HWY., MONTGOMERY, AL. 36108 (1HZR769B)
6. I t e m : Description: 8. Part Number: 9. Eligibility: 10. Quantity: 11. Serial/Batch Number: 12. Status/Work:
ALTERNATOR E3FF10300BA N/A H-M100609 OVERHAULED
MOD/NO
t
END * * * * * * * * * * * ' * * * * H * * * * * * * * * * * * * * * * * * * * * t * * * * * * * * * *
13. Remarks: C O p y OF WORK ORDER A V A I L A B L E O N REQUEST FROM H A R T Z E L L ENGINE TECHNOLOGIES
C E R T I F I E S T H A T T H E W O R K S P E C I F I E D I N B L O C K 12/13 W A S C A R R I E D O U T I N A C C O R D A N C E
W I T H E A S A P A R T 145 A N D W I T H R E S P E C T T O T H A T W O R K T H E A I R C R A F T C O M P O N E N T IS
CONSIDERED R E A D Y FOR RELEASE T O SERVICE UNDER EASA A P P R O V A L CERTIFICATE N U M B E R 04489
EASA.145.4418 A N D B Y T H E F A A A I R A G E N C Y C E R T I F I C A T E N U M B E R 1HZR769B. A P P R O V E D FOR E X P O R T
T H E O R I G . EQUIP. M F G . D A T A A P P E A R S O N T H E D A T A P L A T E I N T H E L I N E S I D E N T I F I E D A S M O D / N O & O R I G . M F G .
C O M P L I E S W I T H PPS-9001 L A T E S T R E V I S I O N .
O V E R H A U L PER C E S S N A M A N U A L # D 5 1 0 7 - 1 - 1 3 , R E V . 1
^Certifies the items identified above w e r e m a n u f a c t u r e d i n conformity to: 19. G*! 14 C F R 4 3 . 9 R e t u r n to Service O t h e r regulation specified in Block 13
• T i p p r o v e d design data a n d a r e i n a condition f o r safe opera}; Certifies that unless olhcr wise s|M'cificd in lllock 13, (lie work identified in Block 12
and described in Block 13 was a c c o m p l i s h e d in accordance with T i l It- 14, Code of
• N o n - a p p r o v e a d e s i g n data specified i n B l o c k 13, F e d e r a l R e g u l a t i o n s , part 43 a n d in rcs|>ccl to thai work, the items a r e approved for
r e t u r n to s e r v i c e .
User/Installer Responsibi
It is i m p o r t a n t to u n d e r s t a n d that the existence of this d o c u m e n t alone does not automatically constitute authority to install the part/component/assembly.
W h e r e the user/installer performs w o r k i n a c c o r d a n c e w i t h the n a t i o n a l regulations of a n airworthiness authority different than the a i r w o r t h i n e s s authority of the country specified in
Block 1, it is essential that the user/installer ensures that his/her airworthiness authority accepts parts/components/assemblies from the a i r w o r t h i n e s s authority o f the country
specified i n B l o c k 1.
Statements i n B l o c k 14 a n d 19 do not constitute installation certification. I n all cases, a i r c r a f t maintenance r e c o r d s must contain a n installation certification issued i n accordance with
the national regulations by the user/installer before the a i r c r a f t m a y be flown.
F A A F o r m 8 1 3 0 - 3 (6-01) *Installer must cross-check e l i g i b i l i t y w i t h applicable technical data. N S N : 0052 0 0 012 ' X X I i
OS
111 I ('( )!)!•• ( I T 1
V)
A
T. A p p r o v i n g N a t i o n a l A v i a t i o n 3. F o r m T r a c k i n g N u m b e r :
Authority/Country:
FAA/UNITED STATES
AUTHORIZED RELEASE CERTIFICATE 41823
FAA Form 8130-3, AIRWORTHINESS APPROVAL TAG
4. O r g a n i z a t i o n N a m e a n d A d d r e s s : 5. W o r k O r d e r / C o n t r a c t / I n v o i c e
T H E A V I A T I O N G R O U P , I N C . 211 P R O S P E C T P A R K , P E A C H T R E E C I T Y , G A 30269 ( V G O R 7 2 8 L ) Number:
41823
6. I t e m : Description: 8. Part N u m b e r : 9. Eligibility: 10. Q u a n t i t y : 11. Serial/Batch N u m b e r : 12. StatusAVork:
ACTUATOR 11-20 1107MA REPAIRED
1 1
N/A
13. R e m a r k s : T H E A B O V E A P P L I A N C E W A S REPAIRED A N D , INSPECTED IN A C C O R D A N C E WITH CURRENT REGULATIONS OF T H E FEDERAL AVIATION ADMINISTRATION A N D IS
APPROVED FOR RETURN TO SERVICE. Manual: 761-783 Revision#:CR980701 Revision Date: 07/01/1998 (Full details held on W.O. 41823 .)
Comments:
CERTIFIES THAT THE WORK SPECIFIED IN BLOCK 12/13 WAS CARRIED OUT I N ACCORDANCE W I T H EASA PART-145, A N D IN RESPECT TO T H A T WORK THE
COMPONENT IS CONSIDERED READY FOR RELEASE TO SERVICE UNDER EASA PART-145 APPROVAL NUMBER: EASA. 145. 4208.
(*rNSTALLER MUST CROSS CHECK E L I G I B I L I T Y W I T H APPLICABLE TECHNICAL DATA.)
LIFE L I M I T PARTS MUST BE ACCOMPANIED BY MAINTENANCE HISTORY INCLUDING T OTAL TIME/TOTAL CYCLES:
" X L T e r t i f i e s the items i d e n t i f i e d above w e r e m a n u f a c t u r e d i n c o n f o r m i t y t o : 19. $ ] 14 C F R 43.9 R e t u r n to Service [>3 O t h e r r e g u l a t i o n specified i n B l o c k 13
1 1 Apph»*j^d design d a t a and a r e i n a c o n d i t i o n f o r safe o p e r a t i o n , ^ ^ ^ C ertifies t h a t unless otherwise specified i n b l o c k 13, the w o r k i d e n t i f i e d i n B l o c k 12
a i d described i n B l o c k 13 was a c c o m p l i s h e d i n accordance w i t h T i t l e 14, C o d e o f
<
[""I Non-approvea"S«s isn data specified i n B l o c k 13.
F :deral R e g u l a t i o n s , p a r t 43 a n d i n respect t o t h a t w o r k , t h e items a r e a p p r o v e d f o r
t u r n to service.
15. A u t h o r i z e d S i g n a t u r e : ^ ^ ^ ^ 16. A p p r o v a l / A u t h o r i z a t i o n N o . : 20. A u t h o r i z e d S i g n a t u r e : 2 1 . Approval/Certificate No.:
VGOR728L
*
17. N a m e (Typed^Trinted): 18. Date (tnToTy): 22. N a i ne ( T y p e d o r P r i n t e d ) : 23. Date (mmm/dd/yyyy):
JUL/22/2013
^^^^ % Richard H . Hewitt
User/Installer Responsibilities
I t is i m p o r t a n t t o u n d e r s t a n d t h a t the existence o f t h i s d o c u m e n t alone does not a u t o m a t i c a l l y constitute a u t h o r i t y t o i n s t a l l the part/component/assembly.
W h e r e the user/installer p e r f o r m s w o r k i n a c c o r d a n c e w i t h t h e n a t i o n a l regulations o f an a i r w o r t h i n e s s a u t h o r i t y d i f f e r e n t t h a n t h e a i r w o r t h i n e s s a u t h o r i t y o f the c o u n t r y specified i n
B l o c k 1, i t is essential t h a t the user/installer ensures t h a t his/her a i r w o r t h i n e s s a u t h o r i t y accepts parts/components/assemblies f r o m t h e a i r w o r t h i n e s s a u t h o r i t y o f the c o u n t r y specified
in B l o c k ) .
Statements i n Blocks 14 a n d 19 do n o t c o n s t i t u t e i n s t a l l a t i o n c e r t i f i c a t i o n . I n a l l cases, a i r c r a f t maintenance r e c o r d s m u s t c o n t a i n a n i n s t a l l a t i o n c e r t i f i c a t i o n issued i n a c c o r d a n c e w i t h t h e
n a t i o n a l regulations b y the user/installer before t h e a i r c r a f t m a y be f l o w n .
F A A Form 8130-3 (6-01) *Insta11er must cross-check e l i g i b i l i t y with applicable technical data. N S N : 0052-00-012-9005

You might also like