Professional Documents
Culture Documents
2 Incubation ESM Energy Saving Module 2020
2 Incubation ESM Energy Saving Module 2020
| Incubation |
Pas Reform
ESM™ Energy Saving
Module
To fully programme the Vortex™ incubator fan
for energy savings of up to 30%
Bovendorpsstraat 11
7038 CH Zeddam
The Netherlands
ESM™
Benefits How it works Related products
Pas Reform’s Energy Saving Module (ESM™) – ESM™ actively controls ventilation in the
SmartSetPro™
dramatically reduces the use of electricity setter, to circulate only the specific amount of
by reducing the speed of the Vortex™ fans air required, without affecting temperature AMF™ Adaptive Metabolic Feedback
in each section of the setter. ESM™ energy uniformity around the eggs
saving module makes the RPM of the Vortex™ – During days 1 and 2 of incubation, the
air pump fully programmable - derived from embryos require maximum air flow to
embryonic metabolism rates inside the setter uniformly heat all the eggs
- to reduce energy consumption by up to 30 – From days 3 to 12, the embryological
per cent during specific phases of embryonic requirements of the eggs are at a lower level,
development. allowing air flow to be reduced to 75% of its
original speed
– From days 12 to 18, the cooling requirements
of the eggs once again require more air flow for
uniform cooling
0,000 kWh 0%
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Incubation days
Technical Specifications
Includes > ESM™ Software and frequency control unit
Bovendorpsstraat 11
7038 CH Zeddam
The Netherlands