Professional Documents
Culture Documents
Throttle Check Valve: Replaces: 02.03
Throttle Check Valve: Replaces: 02.03
Throttle Check Valve: Replaces: 02.03
07
Replaces: 02.03
1/8
Type Z2FS
Size 10
Component series 3X
Maximum operating pressure 315 bar [4569 psi]
Maximum flow 160 l/min [42.3 US gpm]
H5556
Ordering code
Z2FS 10 3X V *
1 1
Variant “–“
TA P A 2 B TB TA P A 2 B TB
1 1
Variant “A“
TA P A 2 B TB TA P A 2 B TB
1 1
Variant “B“
TA P A 2 B TB TA P A 2 B TB
RD 27518/10.07 Z2FS Hydraulics Bosch Rexroth AG 3/8
Function, section
Valves of type Z2FS 10 are throttle check valves of sandwich The hydraulic fluid returning from actuator B2 shifts throttling
plate design. They are used to limit the main or pilot oil flow of spool (3.2) against spring (7), thus allowing an unrestricted
one or two actuator ports. flow like with a check valve. Depending on the installation po-
Two throttle check valves, which are arranged symmetrically sition, throttling can be effective in the supply or return line.
to each other, limit flows in one direction and allow a free re- Main flow limitation
turn flow in the opposite direction. To change the velocity of an actuator (main flow limitation),
With meter-in throttling, hydraulic fluid flows through channel the throttle check valve must be installed between the direc-
A1 via throttling point (1), which is formed by control land (2) tional valve and the subplate.
and throttling spool (3.1), to actuator A2. Throttling spool (3.1) Pilot oil flow limitation
can be axially adjusted by means of spindle (4), thus allowing
In conjunction with pilot operated directional valves, the throt-
throttling point (1) to be adjusted.
tle check valve can be used for adjusting the actuating time
At the same time, hydraulic fluid present in channel A1 flows (pilot oil flow limitation). In this case, it is installed between
through bore (5) to the opposite spool side (6). Together with the pilot and the main valve.
the spring force, the pressure applied holds throttling spool
(3.1) in the throttling position.
5 1
A B
1
A B
4 6 3.1 2 3.2 7
Meter-in throttling
4/8 Bosch Rexroth AG Hydraulics Z2FS RD 27518/10.07
Technical data (for applications outside these parameters, please consult us!)
General
Weight kg [lbs] ca. 3.1 [6.8]
Installation position Optional
Ambient temperature range °C [°F] –20 to +80 [–4 to +176]
Hydraulic
Maximum operating pressure bar [psi] 315 [4569]
Maximum flow l/min [US gpm] 160 [42.2]
Hydraulic fluid Mineral oil (HL, HLP) to DIN 51524; fast bio-degradable
hydraulic fluids to VDMA 24568 (see also RE 90221);
HETG (rape seed oil); HEPG (polyglycols); HEES (syn-
thetic esters); other hydraulic fluids on request
Hydraulic fluid temperature range °C [°F] –20 to +80 [–4 to +176]
Viscosity range mm2/s [SUS] 10 to 800 [60 to 3710]
Permissible max. degree of contamination of the Class 20/18/15 1)
hydraulic fluid - cleanliness class to ISO 4406 (c)
Characteristic curves (measured with HLP46, ϑoil ( = 190 SUS) = 40 °C ± 5 °C [104 °F ± 9 °F])
[116] 8
[100] 1
Pressure differential
6
[80]
in bar [psi] →
2
[60] 4
[40]
2
[20] 1 Throttle closed
9,5
[725] 10,5
50
11
11,5
[145] 10
[72.5] 5
[14.5] 1
[0]
0 20 40 60 80 100 120 140 160
3; 4 3; 4
306 [12.05]
[ 1.26]
[ 1.26]
9 8
2 1
32
32
0
0
3
3
2 1
9 8
9 1 9
48,5 [1.91]
153 [6.02] 70 [2.76] 2
160 [6.3] [0.079]
184 [7.24]
2
[0.059]
1,5
7
80 x 70 [3.15 x 2.76]
4 x 6,7 [ 0.264] 5 x 16 [ 0.63]
6
88 [3.47]
49,5 [1.95]
[0.47]
[0.5]
12,7
“X”
F2
P
12
F1
40 [1.58]
A B
TA TB
F4 F3 10 [ 0.394]
Attention! 0,01/100
[0.0004/4.0]
If bores are required for X- and Y-port (e.g. for pilot operated
directional valve size 10) variant SO30 must be selected! Rzmax 4
For explanations of items and valve mounting screws, Required surface quality of the
see page 8. valve mounting face
RD 27518/10.07 Z2FS Hydraulics Bosch Rexroth AG 7/8
9 1
21 0 98
3
[0.059]
1,5
3; 4 7 9
4 x 6,7 [ 0.264] 80 x 70 [3.15 x 2.76] 5 x 16 [ 0.63]
6
252 [9.92] 20 [0.79]
225 [4.53]
21 0 98
48,5 [1.91]
32
3
[ 1.26]
153 [6.02]
3; 4
[0.059]
1,5
7
4 x 6,7 [ 0.264] 80 x 70 [3.15 x 2.76] 5 x 16 [ 0.63]
6
184 [7.24]
165 [6.5]
156,5 [6.16]
165 [6.5]
156,5 [6.16] 2
88 [3.47]
49,5 [1.95]
[0.47]
[0.5]
12,7
P
12
40 [1.58]
A B
70 [2.76]
TA TB
10 [ 0.394]
8 (A, B) [ 0.315]
4 x 6,7 [ 0.264]
5 10 7,5 (TA, TB)[ 0.295]
Attention! 0,01/100
[0.0004/4.0]
If bores are required for X- and Y-port (e.g. for pilot operated
directional valve size 10) variant SO30 must be selected! Rzmax 4
For explanations of items and valve mounting screws, Required surface quality of the
see page 8. valve mounting face
8/8 Bosch Rexroth AG Hydraulics Z2FS RD 27518/10.07
Unit dimensions
Bosch Rexroth AG © This document, as well as the data, specifications and other informa-
Hydraulics tion set forth in it, are the exclusive property of Bosch Rexroth AG. It
Zum Eisengießer 1 may not be reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No
Phone +49 (0) 93 52 / 18-0 statements concerning a certain condition or suitability for a certain
Fax +49 (0) 93 52 / 18-23 58 application can be derived from our information. The information given
documentation@boschrexroth.de does not release the user from the obligation of own judgment and
www.boschrexroth.de verification. It must be remembered that our products are subject to a
natural process of wear and aging.