Professional Documents
Culture Documents
Retropod (Deep Water) : Technical Datasheet
Retropod (Deep Water) : Technical Datasheet
Retropod (Deep Water) : Technical Datasheet
Steel grade ASTM A53 [ ASTM A106 ] Dimensions (L x W x H) 96” x 5.5” x 5.9” 96” x 8.5” x 9.9”
ASTM A36 [ EN 10025 S355 ] [ 2438 x 140 x 150 mm ] [ 2438 x 216 x 251 mm ]
Gravity base Provided by RetroMat (see Description RetroPod is available with two anode compositions. Deep10 alloy
(Item 3) RetroMat technical datasheet) was designed as an effective, general purpose offshore alloy for use
16 blocks, in tropical water environments. Deep7 alloy, with low iron content, is
Block size - 20” x 20” x 12” more effective in cold, deep water.
[ 500 x 500 x 300 mm ]
Composition (%) Deep7 Deep10
Block volume - 1.5 ft3 [0.042 m3 ]
concrete blocks only Iron (Fe) 0.07 max. 0.10 max.
Lifting (Item 4) 1/2” [ 12.7 mm ] Padeye Silicon (Si) 0.10 max. 0.10 max.
Copper (Cu) 0.003 max. 0.006 max.
Description If required, four small booster anodes can be added to the RetroPod
for a structure that has lost all cathodic protection. The additional
upper anode array provides a 15% current boost for the first 2-3
months to quickly re-establish cathodic polarization.
Net weight 40 lb [ 18 kg ]
4
Gross weight 48 lb [ 21.5 kg ]
Dimensions Ø 3” x 60” [ Ø 75 mm x 1525 mm ]
1 Core 3/4” x 62” [ 19 mm x 1575 mm ] Stud
10 Year 20 Year
Dimensions (W x D x H) 96” x 96” x 140” 96” x 96” x 140”
[ 2440 x 2440 x 3560 mm ] [ 2440 x 2440 x 3560 mm ]
Weight (Air) 6050 lb [ 2750 kg ] 7650 lb [ 3470 kg ]
2 3 5 Weight (Water) 3800 lb [ 1730 kg ] 4550 lb [ 2070 kg ]
Anode Engineering Pty Ltd | Ph: +61 7 3801 5521 | Fax: +61 7 3801 5523 | Toll free: 1 800 446 400 | Email: sales@anodeengineering.com |
©
2013 Deepwater Corrosion Services Inc. Specifications subject to change without notice www.anodeengineering.com
CPN 13 003