Professional Documents
Culture Documents
2 SIC9231SE EN Rev1.0
2 SIC9231SE EN Rev1.0
2 SIC9231SE EN Rev1.0
General Description
SIC9231SE is a high precision three-stage linear adaptive LED driver, integrated high-voltage JFET power
supply and power mosfet. Which can accurately set the LED current through external resistance, and effectively
improve PF and optimize THD by optimizing the current reference during segmented conduction. The system
BOM cost is extremely low, which can help meet EMI requirements with small size.
SIC9231SE integrates line voltage compensation function. When line voltage exceeds the threshold, the
LED current will be automatically reduced to ensure reliability of system. SIC9231SE also provides OTP
function. When IC temperature exceeds the OTP threshold, the LED current is decreased, which can help IC
cooling.
Features
Simple peripheral driving circuit, drives, Built-in over temperature adjustment function
smallsize THD<20%
No electrolytic capacitors and magnetic elements, LED current can be set externally
stable performance
NO jumper resistance
Built-in high voltage power supply and MOS
Multi-Chip Operating in Parallel without Jumper
Built-in constant power compensation function Resistors
Application
LED bulb lamp, downlight, fluorescent lamp, Cast light lamp, street lamp, other LED lamp
Typical Application
Ordering Information
Part NumAer Package Package Method Marking
SIC
Tape
SIC9231SE ESOP8 9231SE
4,000pcs/Roll
XXXXXX
ESOP-8 Products
“Si”-Logo of SI Semiconductors
MMMM--Part NumAer
XXXXXX--Date Code
Pin Description
Pin Pin Name Description
1 ISEN Current Sense Input, connect a resistor to GND
2、7 D2 Drain for LED string2
3、6 GND Ground(Bottom PAD Ground)
4 VS Power Compensation
5 D3 Drain for LED string3
8 D1 Drain for LED string1
ELECTRICAL CHARACTERISTICS
Electrical characteristics(TC=25℃,unless otherwise specified)
Parameter SymAol Conditions MIN TYP MAX Unit
VDD operating current IVDD VD1=30V 0.1 0.18 0.5 mA
D1\D2\D3 max voltage VD 700 V
D1 Pin MOSFET Saturation
ISAT_D1 VD1=30V 80 mA
Current
D2 Pin MOSFET Saturation
ISAT_D2 VD2=30V 120 mA
Current
D2 Pin MOSFET Saturation
ISAT_D2 VD2=30V 140 mA
Current
VS Floating 220 V
Line Voltage Compensation
VS Grounding 202 V
Threshold( D1 Voltage) VTH_VS
VS connected to
184 V
100k to GND
Offset of ISEN Reference
VREF_0V VS Floating 350 mV
Voltage
ISEN Reference Voltage Floating,
VREF_50V 487 mV
when D1=50V VD1=50V
Temperature regulation TREG 145 ℃
APPLICATION DESCRIPTION
SIC9231SE is a high precision three-stage linear constant current LED driver to meet the high PFC\low
THD, and power compensation can be done in a certain input voltage range.
SIC9231SE changes the number of connected LED lamp beads according to the bus voltage
change. During the whole AC cycle, as the bus voltage rises, each LED egment lamp string is gradually lighting,
and the current increases step by step to achieve high PFC and low THD.
SIC9231SE can automatically adapt to different LED lamp string forward voltage drop according to the
input AC voltage, without external resistance to set the lamp string switching voltage. It is generally used with
high voltage lamp beads, requiring the total lamp string voltage to be close to the input voltage. For
Vin=220VAC applications where 18V beads are used, 15 beads with a 6:5:4 ratio are required.
VISEN
I LED
R ISEN
ESOP-8 封装机械尺寸
器件定位示意图/UNIT ORIENTATION
13"卷盘/REEL