Professional Documents
Culture Documents
Cam Analysis Apparatus
Cam Analysis Apparatus
: 1104
DESCRIPTION:
A cam may be defined as a rotating or a reciprocating
element of a mechanism which imparts a rotating,
reciprocating or oscillating motion to another element termed
as follower. In most of the cases the cam is connected to a
frame, forming a turning pair and the follower is connected to
the frame to form a sliding pair. The cam and the follower form
a three-link mechanism of the higher pair type. The three links
of the mechanism are:
The cam, which is the driving link and has a curved or a
straight contact surface
The follower, which is the driven link and it gets motion
by contact with the surface of the cam.
The frame, which is used to support the cam and guide
the follower.
EXPERIMENTS:
To find out the cam and follower behavior at different follower movement
To study the different types of cam and follower with their practical uses.
To find out the cam follower displacement curve at different motion.
To find out jump phenomenon.
TECHNICAL SPECIFICATIONS:
Offset roller follower
Cams include: - tangent cam, constant acceleration cam, simple harmonic cam.
Followers include: - Roller, knife edge.
Bench mounted unit consists of a dial gauge for the measurement of displacement and a
protector scale and bracket for measurement of angular motion.
Supplied complete with fitting follower and cam:
A lever follower on a support with a pointer and scale
A flat follower 38mm wide
A uniform motion cam
An eccentric cam
Dimension and weights (without fitting, followers and cams): 250 X 150 X 540mm,
4.1 kg (approx.).
SERVICES REQUIRED:
Batch Area : 0.6m X 0.33m
Power Supply : 220 volts DC single phase 5 Amp. Socket
Photograph is only for reference, final product may vary from it.
Specification subject to change without notice. Owing to constant product up-gradation policy.