Professional Documents
Culture Documents
IS 1200 Part 13
IS 1200 Part 13
IS 1200 Part 13
• White washing
Scope
• Colour washing
• Distempering
• Painting of building
surfaces
2
3
• On the basis of detailed description of
item, they can be clubbed together
4
• Materials and workmanship for any item
of work have to be fully described in
bill of quantities
5
• Whitewash, Colour wash
• Washable Distemper
6
• Priming and alkali neutralizing
treatment
• Scrapping of surface
7
All works shall be measured net in square
meters as given below:
8
• For ends of joists, beams and posts
where opening is not exceeding 0.5 m2
Deductions of in area no deductions have to be
made
exceeding 0.5 m2
9
• When both faces of walls are provided
with the same finish, deduction shall
be made for one face only.
Deductions of
• When both the faces are provided
with different finish, deduction shall
be made from that face where width
openings for is less. If width is same 50% of area of
opening is to be deducted from area
area exceeding
of finish
exceeding 3 m2
10
• When only one face is treated and
width is more than untreated face
Deductions of
then neither deduction of opening nor
the addition is made
area exceeding
made
openings
12
• Corrugated surface shall be measured
flat
Painting on
Corrugated steel sheets 14%
surface
asbestos cement
sheets
Nainital pattern roofs 10%
Nainital pattern roofs 25%
corrugated sheets
13
• Areas of uneven surfaces can be
converted into equivalent plain areas
by increasing the areas as under
External walls of plain 20%
brickwork faced
with recessed, raised or
uneven surfaces
Sand face plaster with 50%
up to 4 rom size
Rough cast plaster with 100%
stone aggregate
up to 10 mm
Pebble dash finish 275%
beyond 10 mm
Sponge finished plaster 25%
14
Example
15
16
17
18
19
20
Thank you!
Prepared By
1. Aniruddha Chakraborty P2270107
2. Harsh Gala P2270108
3. Neeraj Deodhar P2270109
21