Professional Documents
Culture Documents
P34HB10 TDS-2021
P34HB10 TDS-2021
P34HB 10
Polyhydroxy fatty
acid ester
Product description
The product descri
P34HB 10 is a fully biodegradable semi-crystalline aliphatic polyester powder prepared
by granulation (blending with plasticizer, heat stabilizer and processing aid), which can be
further used in injection molding, film blowing, sheet extrusion and other processes.
P34HB 10 will degrade to carbon dioxide and water in the presence of microorganisms, water and
Product application
After granulation, P34HB10 can be injected into daily articles, blow plastic
bags, extrusion sheet, 3D printing wire, etc. It can be blended with other biodegradable
materials such as PLA, other aliphatic polyesters (such as PBS, PBSA, PBAT), TPS and
some non-degradable materials (such as TPU, PVA, POM, PMMA, ABS, etc). It is strongly
recommended that processing performance tests be performed to assess the quality of the
final product prior to blending.
Typical performance
P34HB 10
Has the following features:
Good tensile strength and toughness
Good surface gloss
Good coloring and printing
Performance Unit Test criteria Typical values
3
Density g/cm ASTM D-792 1.25
Melt flow rate g/10min ASTM D-1238 8.93
Melting point ℃ DSC 175
Tensile strength MPa ASTM D-638 22
Tensile strain at break % ASTM D-638 30
Izod notched impact
KJ/m2 ASTM D-256 5
strength
Water absorption % ASTM D-570 <0.4