Professional Documents
Culture Documents
Untitled
Untitled
a)
i) Solve minimum thickness of a boiler drum with ID 1.6m, welded construction, welds
finished flush with surface drum material SA-516-65, temperature does not exceed
250ºC, MAWP is 4500kPa, ligament efficiency is 0.5 and S is 112MPa
ii) does this meet code?
2. a) MAWP of a stayed flat plate 11mm thick, stay bolts attached by fusion welding
pitched at 150mm horizontally and vertically, material is SA-515-65, design T=350ºC &
S=102MPa
b) Stay bolt diameter? If allowable stress is 51.7MPa.
c) Minimum allowable distance centre to centre of 2 un-reinforced openings in a 965mm
ID blank unstayed head in the segment of a sphere, head t=22mm, design P=170kPa,
opening D=100mm, S=102MPa, pressure is on the concave side
3. What is the Supreme Court? What's a "leave" in civil cases? Reference Case
6. Incline at 60º, pulley at top of incline, block A is on the incline block B is hanging
vertically, blocks are connected over the pulley
a) mass block B = 4kg, what is the mass of block A if block A moves down the incline at
2m/s^2?
b) mass block A = 4kg, mass block B = 10kg, coefficient of kinetic friction is 0.3
i) What is the acceleration if block A is moving up the incline
ii) What is the acceleration if block A is moving down the incline
7. Determine the equivalent resultant force and location from the left side of the beam
(point A). Three beams with distributed loads shown. Distributed loads comprised of flat
and slopes.