Professional Documents
Culture Documents
VF25 Techno Imperial
VF25 Techno Imperial
VF25
4.53
(A)
21.14 699
13.86 2.80
10.39
16.54
230
3.86
TO 0.98
12.40 15.91
14.21 SUIT
M10 HT
BOLTS
18.70
218 PSI
Pumphead Absorbed Power (HP)
2.50
145 PSI
0 0.75 1.5 2.25 3.0 3.75 4.5 5.25 6.0 6.75 7.5 8.25 9.0 9.75 Flow Rate (US GPM)
Displacement 0.075 USg/revolution, Capacity is speed x 0.075 in US GPM
Minimum starting torque required: 1018 in.lb
Maximum peak power +4%
145
116 3 SHIMS
87
58 2 SHIMS
29
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 Pump Speed (rpm)
For product temperatures above 149˚F and/or viscocity above 2000 mPas use one shim less than shown
Flows are typical and were measured with water at 68°F with no suction lift or discharge pressure. Actual flows will vary
according to suction conditions, discharge pressure and normal component production tolerances.