Professional Documents
Culture Documents
Pe Cep A3
Pe Cep A3
Instructions
1. Last date for the submission of the assignment is Monday 7 May 2022.
3. Properly scan your assignment using the Camscanner. Crop all unnecessary part while
scanning.
2. CLO2: Analyze the basic operation, behavior, design, and modeling of DC-DC con-
verters.
4. CLO4: Evaluate the gate driver circuits, thermal design, snubber circuits, and per-
formance of AC-AC converters.
Questions
1. A three-level five-switching angle SHE PWM waveform, which is shown in Figure 1, is
to be controlled using STM.
Use Newton-Raphson method to solve the SHE PWM switching angles. In this exam-
ple, a single-phase system is assumed, and modulation index of output voltage, M, is
0.85.
(a) Derive a Fourier Series Expression for the give output voltage waveform.
(b) Write an m-file to determine the angle of notches such that 3rd, 5th, 7th and 11th
harmonic is eliminated and modulation index is 0.85.
(c) Implement the inverter in Matlab Simulink. Show output voltage waveform and
all the gate signals.
(d) Show the current waveform for RL-load, R = 1 Ω and L = 10 mH.
(e) Determine the total harmonic distortion (THD) of the load voltage and current
waveform.
(f) Determine the spectrum of the inverter output voltage waveform.
EA1: Range of resources • EA1: Range of resources Design & implementation involves
EA2: Level of interaction resources, such as, computational equipment and Matlab.
EA3: Innovation Rubrics
EA4: Consequences for Presents the final design clearly with all supporting EA1
society and environment information and documents. (7%)
EA5: Familiarity Prepares a report which is free from technical errors EA1
(format, grammar, spelling) (3%)