Professional Documents
Culture Documents
Tinovis GTC (Ti)
Tinovis GTC (Ti)
March 2011
04_101046e-00/Page 1 of 4
® = Registered trademark of BASF group Rheology Modifier for clear gel systems
Personal Care
04_101046e-00 March 2011 Page 2 of 4 Tinovis GTC
PRD-No.* 30475141
Applications Tinovis GTC is an alkali soluble associative thickener designed for use in a range
of applications in the cosmetics industry. It is typically used to enhance the
performance of skin and hair care formulations where a clear gel is required.
Features / benefits Performance
Ease of manufacture of finished product.
Viscosity build at room temperature on neutralization.
Ideal for clear gel products.
Efficiency in thickening surfactants systems.
Thickens over pH range 5.5 – 2.5.
Primary features
Efficient thickening at pH 6.
Viscosity building.
Associative Rheology.
Guidelines for use Tinovis GTC is designed for use in the presence of nonionic and anionic ingredients.
It is particularly effective when formulating at pH 5.5 – 12.5.
Tinovis GTC is an efficient thickener that may be used over a wide pH range
of 5.5 – 12.5, allowing its use in a wide range of formulations. The efficiency of
Tinovis GTC may be slightly decreased by the addition of ionic salts. Using a
higher concentration of Tinovis GTC can offset any viscosity decrease at higher
electrolyte levels. Multivalent ions will have a greater effect on the thickening
efficiency of Tinovis GTC.
Tinovis GTC is compatible with a wide range of commonly used anionic, amphoteric
and nonionic surfactants. Formulations containing combinations of these types
of surfactants, Tinovis GTC and salt (NaCl) show more efficient viscosity build than
with salt alone.
Alcohol
Tinovis GTC is effective as a thickener in formulations containing up to 30%
denatured ethanol.
UV Absorbers
Water-soluble UV absorbers can be incorporated into formulations containing
Tinovis GTC.
Handling & Safety Detailed information on handling and any precautions to be observed in the use of
the product described in this leaflet can be found in the relevant Health and Safety
information sheet.
Note This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors may
affect processing or application/use, we recommend that you make tests to
determine the suitability of a product for your particular purpose prior to use. It
does not relieve our customers from the obligation to perform a full inspection of
the products upon delivery or any other obligation. NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE
CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.
March 2011