Professional Documents
Culture Documents
Signals All Lab Exam and Quiz PDF
Signals All Lab Exam and Quiz PDF
Question 1
Correct
Flag question
Question text
In an ideal low pass filter, if the passband frequency, ωp = 0.3π and the stopband frequency,
ωs = 0.4π, then the cut off frequency is
Select one:
a.
0.4π
b.
0.35π
c.
0.7π
d.
0.1π
Question 2
Correct
Flag question
Question text
In the computation of convolution, one of the sequences is folded, then shifted, then ____by
the other sequence to form the product sequence for that shift, and finally, the values of the
product sequence are summed.
a.
distributed
b.
added
c.
subtracted
d.
multiplied
Feedback
Your answer is correct.
Question 3
Correct
Flag question
Question text
____ of signals is often encountered in radar, sonar, digital communications, geology, and
other areas in science and engineering.
a.
Ionizing
b.
Sampling
c.
Z transform
d.
Correlation
Feedback
Your answer is correct.
Question 4
Correct
Flag question
Question text
__is an operation in the time domain which is fold-shift-multiply-sum in one.
a.
Ionizing
b.
Z transform
c.
Convolution
d.
Sampling
Feedback
Your answer is correct.
Question 5
Correct
Flag question
Question text
In the case of convolution, _____are involved in correlation.
a.
z transform
b.
sampling
c.
d.
Question 6
Correct
Question text
In convolution, ______ involves flipping about k = 0 (the time origin),to obtain h (- k).
Select one:
a.
shifting
b.
multiplication
c.
summation
d.
folding
Question 7
Correct
Flag question
Question text
In digital signal processing, the _______converts an analog signal to typically an electrical
signal.
Select one:
a.
transducer
b.
DAC
c.
anti-alias filters
d.
compressor
Question 8
Correct
Flag question
Question text
If there is 1 delay from input and 1 from kernel of an LTI causal system, the total delay/s
would be
Select one:
a.
b.
c.
no delay
d.
Question 9
Correct
Question text
If up sampling a signal involves by inserting non-zero values in between, this multirate DSP
is referred to as
Select one:
a.
rounding
b.
interpolation
c.
insertion
d.
decimation
Question 10
Correct
Flag question
Question text
In a rectangular pulse, the value of the even harmonics is
Select one:
a.
b.
0
c.
Undefined
d.
Question 1
Correct
Flag question
Question text
If the signal has a sampling rate of 48kHz, to produce a 44.1kHz signal, using integer factors,
the signal has to be
Select one:
a.
b.
c.
d.
Question 2
Correct
Question text
From the given analog signal:
xa(t) = 4 sin 4000πt + 8 cos 3000πt
Determine the frequency components of the signal.
a.
c.
d.
Question 3
Correct
Flag question
Question text
If the system's outputdepends only on its current input sample and past input samples, then
it is referred to as
Select one:
a.
non-causal
b.
time invariant
c.
causal
d.
time variant
Question 4
Correct
Flag question
Question text
If the shifted input generate the corresponding shifted output in the same amount of time
then the system is
Select one:
a.
time variant
b.
non-causal
c.
causal
d.
time invariant
Question 5
Correct
Flag question
Question text
In video signals, if the frame rate of the original signal is 30 frames per second, to convert it
to 24 frames per second,
Select one:
a.
b.
c.
d.
Question 6
Correct
Flag question
Question text
In the transfer function given by
The b coefficients are
Select one:
a.
b.
c.
d.
Question 7
Correct
Flag question
Question text
The ____converts an analog signal to typically an electrical signal.
a.
rectifier
b.
filter
c.
inverter
d.
transducer
Feedback
Your answer is correct.
Question 8
Correct
Flag question
Question text
___corresponds to how many levels or gradations can be made to a waveform.
a.
CRT
b.
Sampling resolution
c.
Noise
d.
Z transform
Feedback
Your answer is correct.
Question 9
Correct
Question text
____allow excerpting a portion of a signal for analysis, synthesis or for whatever
purpose.
a.
b.
Homogeneity
c.
Windowing techniques
d.
Transfer function
Feedback
Your answer is correct.
Question 10
Correct
Flag question
Question text
____is represented by computers. It is where the analysis and decision takes place. Using
computer algorithms, the signals are processed.
a.
b.
Resistor
c.
IC
d.
ADC
Feedback
Your answer is correct.
Question 1
Correct
Flag question
Question text
In audio signal processing, a _____acts as the transducer in the system. In communications,
an _____converts electromagnetic waves.
a.
microphone, antenna
b.
capacitor, inductor
c.
resistor, antenna
d.
antenna,microphone
Feedback
Your answer is correct.
Question 2
Correct
Flag question
Question text
A continuous time and discrete time signal varies in how they are expressed as a function.
The latter uses ________ as its function.
Select one:
a.
time
b.
frequency
c.
poles
d.
sample
Question 3
Correct
Mark 1.00 out of 1.00
Flag question
Question text
A _______ is used to convert digital signals consisting of 0s and 1s to varying analog signals
(such as a voltage signal).
Select one:
a.
analog-to-digital converter
b.
digital-to-analog converter
c.
quantizer
d.
dequantizer
Question 4
Correct
Flag question
Question text
A functional representation given by
represents a
Select one:
a.
Fourier transform
b.
discrete-time sequence
c.
rectangular pulse
d.
sinusoidal signal
Question 5
Correct
Flag question
Question text
Signal which cannot be expressed in simple mathematical form example is random noise.
a.
Discrete time-signals
b.
Non-deterministic signal
c.
Distortion
d.
Deterministic signal
Feedback
Your answer is correct.
Question 6
Correct
Flag question
Question text
A discrete time signal can consist of
Select one:
a.
b.
c.
d.
Question 7
Correct
Question text
Unprocessed physical quantities such as the ____ that we hear are in the form of continuous
time.
a.
discrete time-signals
c.
audio signal
d.
deterministic signal
Feedback
Your answer is correct.
Question 8
Correct
Flag question
Question text
Random signal are expressed using____.
a.
summation
b.
probability
c.
multiplication
d.
subtraction
Feedback
Your answer is correct.
Question 9
Correct
Flag question
Question text
___allows a complex plane representation of the signal or the system.
a.
Zero transform
b.
Z transform
c.
Y transform
d.
Graphical plane
Feedback
Your answer is correct.
Question 10
Correct
Flag question
Question text
____are often referred to as analog signals and they take on values in continuous interval (a,
b), where a can be -∞ and b, ∞.
a.
Distortion
c.
Feedback
d.
Discrete time-signals
Feedback
Your answer is correct.
Question 1
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In an ideal low pass filter, if the passband frequency, ωp = 0.3π and the stopband frequency,
ωs = 0.4π, then the cut off frequency is
Select one:
a.
0.4π
b.
0.35π
c.
0.7π
d.
0.1π
Question 2
Correct
Flag question
Question text
In the computation of convolution, one of the sequences is folded, then shifted, then ____by
the other sequence to form the product sequence for that shift, and finally, the values of the
product sequence are summed.
a.
distributed
b.
added
c.
subtracted
d.
multiplied
Feedback
Your answer is correct.
Question 3
Correct
Flag question
Question text
____ of signals is often encountered in radar, sonar, digital communications, geology, and
other areas in science and engineering.
a.
Ionizing
b.
Sampling
c.
Z transform
d.
Correlation
Feedback
Your answer is correct.
Question 4
Correct
Flag question
Question text
__is an operation in the time domain which is fold-shift-multiply-sum in one.
a.
Ionizing
b.
Z transform
c.
Convolution
d.
Sampling
Feedback
Your answer is correct.
Question 5
Correct
Question text
In the case of convolution, _____are involved in correlation.
a.
z transform
b.
sampling
c.
Question 6
Correct
Flag question
Question text
In convolution, ______ involves flipping about k = 0 (the time origin),to obtain h (- k).
Select one:
a.
shifting
b.
multiplication
c.
summation
d.
folding
Question 7
Correct
Flag question
Question text
In digital signal processing, the _______converts an analog signal to typically an electrical
signal.
Select one:
a.
transducer
b.
DAC
c.
anti-alias filters
d.
compressor
Question 8
Correct
Flag question
Question text
If there is 1 delay from input and 1 from kernel of an LTI causal system, the total delay/s
would be
Select one:
a.
b.
c.
no delay
d.
Question 9
Correct
Flag question
Question text
If up sampling a signal involves by inserting non-zero values in between, this multirate DSP
is referred to as
Select one:
a.
rounding
b.
interpolation
c.
insertion
d.
decimation
Question 10
Correct
Flag question
Question text
In a rectangular pulse, the value of the even harmonics is
Select one:
a.
b.
c.
Undefined
d.
Question 1
Correct
Mark 1.00 out of 1.00
Flag question
Question text
In audio signal processing, a _____acts as the transducer in the system. In communications,
an _____converts electromagnetic waves.
a.
capacitor, inductor
b.
microphone, antenna
c.
antenna,microphone
d.
resistor, antenna
Feedback
Your answer is correct.
Question 2
Correct
Question text
Find the DTFT of the signal x[n] = 0.9n u[n]
Select one:
a.
b.
c.
d.
Feedback
Your answer is correct.
Question 3
Correct
Flag question
Question text
A____ is used to convert digital signals consisting of 0s and 1s to varying analog signals such
as a voltage signal.
a.
Notch filter
b.
ADC
c.
Detector
d.
DAC
Feedback
Your answer is correct.
Question 4
Correct
Flag question
Question text
Signal which cannot complete a certain pattern in one cycle.
a.
Noise
b.
Error signal
c.
Periodic signal
d.
Aperiodic signal
Feedback
Your answer is correct.
Question 5
Correct
Flag question
Question text
The ____converts an analog signal to typically an electrical signal.
a.
Transmitter
b.
Transducer
c.
Filter
d.
Receiver
Feedback
Your answer is correct.
Question 6
Correct
Mark 1.00 out of 1.00
Flag question
Question text
____corresponds to how many levels or gradations can be made to a waveform.
a.
Z-transform
b.
Periodic signal
c.
Sampling resolution
d.
Error signals
Feedback
Your answer is correct.
Question 7
Correct
Flag question
Question text
The Discrete Time Fourier Transform is just DFT with ____.
a.
zero padding
b.
increasing value
c.
decreasing value
d.
equal padding
Feedback
Your answer is correct.
Question 8
Correct
Flag question
Question text
The main concept behind the ____is that from the electrical signal coming from the
transducer, it is converted into a stream of 0s and 1s which can be read by the digital signal
processor.
a.
filter
c.
d.
envelope detector
Feedback
Your answer is correct.
Question 9
Correct
Flag question
Question text
Signal which cannot be expressed in simple mathematical form example is random noise.
a.
Non-deterministic signal
b.
Electromagnetic wave
c.
Deterministic signal
d.
Transducer
Feedback
Your answer is correct.
Question 10
Correct
Flag question
Question text
Describe the magnitude response of the 6thorder Butterworth filter as .
Butterworth filter is among the many filters under the IIR class.
Examine the low pass filter design given by the codes below:
fc = 300; % cut off frequency
fs = 1000; % sampling frequency
[b,a] = butter(6,fc/(fs/2)); % 6th order Digital
butterworth
freqz(b,a) % show the magnitude response
Describe the magnitude response of the 6th order Butterworth filter as shown in the graph
Select one:
a.
b.
Butterworth Filter has minimally flat pass band magnitude response with maximum ripples.
c.
Butterworth Filter has maximally flat pass band magnitude response with no ripples.
d.
Butterworth Filter has maximally flat pass band magnitude response with minimum ripples.
Question 1
Correct
Question text
Signals which are the preprocessed signals which are to be used in digital signal
processing. It is represented mathematically by a sequence of numbers x.
a.
Deterministic signal
b.
Discrete time-signals
c.
Fourier analysis
d.
Cut-off frequency
Feedback
Your answer is correct.
Question 2
Correct
Flag question
Question text
Signal which can be expressed in mathematical form example is y = A sin ωt where it can be
described as a sinusoidal signal with amplitude, A and is a function of time, t.
a.
Deterministic signal
b.
Error signals
c.
d.
Noise
Feedback
Your answer is correct.
Question 3
Correct
Flag question
Question text
Random signal are expressed using____.
a.
probability
b.
summation
c.
subtraction
d.
multiplication
Feedback
Your answer is correct.
Question 4
Correct
Flag question
Question text
It is distinguished from other areas in computer science by the unique type of data it uses.
a.
Transducer
b.
Signals
c.
Noise
d.
Electromagnetic wave
Feedback
Your answer is correct.
Question 5
Correct
Flag question
Question text
In order for us to convert a continuous time signal to discrete time time, _____is performed.
a.
sampling
b.
doping
c.
signaling
d.
ionization
Feedback
Your answer is correct.
Question 6
Correct
Flag question
Question text
_____are often referred to as analog signals and they take on values in continuous interval (a,
b), where a can be -∞ and b, ∞.
a.
Error Signal
c.
Fourier Analysis
d.
Question 7
Correct
Flag question
Question text
Unprocessed physical quantities such as the ____ that we hear are in the form of continuous
time.
a.
ramdom noise
b.
audio signal
c.
error signal
d.
cut-off frequency
Feedback
Your answer is correct.
Question 8
Correct
Flag question
Question text
____is a discipline that spans electrical engineering, computing, mathematics and the
physical sciences.
a.
Envelope Detector
b.
c.
ADC
d.
Digital to analog
Feedback
Your answer is correct.
Question 9
Correct
Flag question
Question text
The transformation of a signal from continuous-time to discrete-time form through
sampling doesn’t just involve the conversion of the nature of the signal. This may also allow
us to analyze the stability of the system through the use of the____.
a.
zero transform
b.
complex plane
c.
z-transform
d.
y-transform
Feedback
Your answer is correct.
Question 10
Correct
Question text
___are said to have a range of 20 Hz up to 2kHz.
a.
Audible signals
b.
Error signal
c.
Noise
d.
Question 1
Correct
Flag question
Question text
__convert ac voltage at one frequency to another ac voltage at another frequency.
a.
inverter
b.
generators
c.
frequency converter
d.
prime mover
Feedback
Your answer is correct.
Question 2
Correct
Flag question
Question text
It states that, for a signal to be properly reconstructed, a signal must be sampled twice the
maximum frequency component of the signal.
a.
Faraday’s Law
b.
d.
Question 3
Correct
Flag question
Question text
____ is used to convert digital signals consisting of 0s and 1s to varying analog signals (such
as a voltage signal).
a.
ADC
b.
DAC
c.
FET
d.
Envelope Detector
Feedback
Your answer is correct.
Question 4
Correct
Question text
Unprocessed physical quantities such as the ____ that we hear are in the form of continuous
time.
a.
noise
b.
discrete time-signals
c.
audio signal
d.
deterministic signal
Feedback
Your answer is correct.
Question 5
Correct
Flag question
Question text
It is non-invasive test that record the electrical activity of the heart.
a.
Electrocardiogram
b.
EEG
c.
Radiography ( X-Ray)
d.
Biometrics
Feedback
Your answer is correct.
Question 6
Correct
Flag question
Question text
This device detects electrical signals from the brain using the 8-16 pair of electrodes
attached to the scalp.
a.
ECG
b.
Biometrics
c.
EEG
d.
Radiography
Feedback
Your answer is correct.
Question 7
Correct
Flag question
Question text
What is the resulting sampling rate if the original sampling rate is 6000 Hz, up-sampled by
10 and down-sampled by 3?
Select one:
a.
5000 Hz
b.
20,000 Hz
c.
16000 Hz
d.
20000 Hz
Question 8
Correct
Question text
While referring to the difference equation, if there is a past and present output, the filter is
an FIR filter.
Select one:
True
False
Question 9
Correct
Flag question
Question text
The values of the new samples when employing linear interpolation is computed by
Select one:
a.
zero padding
b.
c.
zero insertion
d.
Flag question
Question text
When dealing with non-causal system, convolution is practically the same with causal; the
impulse will always start at n=0.
Select one:
True
False
Question 11
Correct
Flag question
Question text
This procedure uses a special device to detect the sound that is reflected from a beating of
the heart.
a.
Arthrogram
b.
Mammography
c.
Echocardiography
d.
Fluoroscopy
Feedback
Your answer is correct.
Question 12
Correct
Flag question
Question text
What is natural pacemaker of the body?
a.
Iris
b.
Aorta
c.
Sinus node
d.
Retina
Feedback
Your answer is correct.
Question 13
Correct
Question text
What is the sampling period if the sampling frequency is 10 Hz?
Select one:
a.
1 second
b.
0.01seconds
c.
100 ms
d.
10 seconds
Question 14
Correct
Flag question
Question text
The value of the second sample after upsampling using linear interpolation would be x
= [ 0 1 2 3 4] by 3 would be:
Select one:
a.
3
b.
1.5
c.
d.
0.5
Question 15
Correct
Flag question
Question text
What is the order of the filter
Select one:
a.
b.
c.
d.
Question 16
Correct
Question text
The ____converts an analog signal to typically an electrical signal.
a.
Receiver
b.
Detector
c.
Filter
d.
Transducer
Feedback
Your answer is correct.
Question 17
Correct
Flag question
Question text
From the given analog signal:
xa(t) = 4 sin 4000πt + 8 cos 3000πt
Determine the minimum sampling frequency to avoid aliasing.
a.
2500
b.
2000
c.
3000
d.
4000
Feedback
Your answer is correct.
Question 18
Correct
Flag question
Question text
Method of creating images of the inside of opaque organs in living organisms as well as
detecting the amount of bound water in geological structures.
a.
Arthrogram
b.
Echocardiography
d.
Fluoroscopy
Feedback
Your answer is correct.
Question 19
Correct
Flag question
Question text
What type of filter is described by following specifications
Select one:
a.
Low pass
b.
High pass
c.
Bandpass
d.
Bandstop
Question 20
Correct
Question text
The Discrete Time Fourier Transform (DTFT) is just DFT with ____.
a.
zero padding
b.
decreasing value
c.
equal padding
d.
increasing value
Feedback
Your answer is correct.
Question 1
Correct
Flag question
Question text
____is a property which refers to the scaling or multiplying by a constant.
a.
Complex number
b.
Scalar
c.
Determinants
d.
Homogeneity
Feedback
Your answer is correct.
Question 2
Correct
Flag question
Question text
Random signal are expressed using____.
a.
summation
b.
multiplication
c.
subtraction
d.
probability
Feedback
Your answer is correct.
Question 3
Correct
Flag question
Question text
____allows a complex plane representation of the signal or the system.
a.
Z-transform
b.
Zero transform
c.
Complex plane
d.
Y-transform
Feedback
Your answer is correct.
Question 4
Correct
Flag question
Question text
Signal input is a real world signal which is in____.
a.
complex plane
b.
c.
digital form
d.
y-transform
Feedback
Your answer is correct.
Question 5
Correct
Flag question
Question text
The transformation of a signal from continuous-time to discrete-time form through
sampling doesn’t just involve the conversion of the nature of the signal. This may also allow
us to analyze the stability of the system through the use of the____.
a.
y transform
b.
z-transform
c.
complex plane
d.
zero transform
Feedback
Your answer is correct.
Question 6
Correct
Flag question
Question text
The Discrete Time Fourier Transform is just DFT with ____.
a.
equal padding
b.
decreasing value
c.
zero padding
d.
increasing value .
Feedback
Your answer is correct.
Question 7
Correct
Flag question
Question text
____are signals which are the preprocessed signals which are to be used in digital signal
processing. It is represented mathematically by a sequence of numbers x.
a.
Non-deterministic signal
b.
Discrete time-signals
c.
Deterministic signal
d.
Spectra
Feedback
Your answer is correct.
Question 8
Correct
Flag question
Question text
According to the French mathematician and physicist, ___any continuous periodic signal is
could be represented by sum of sinusoids.
a.
Michael Faraday
b.
c.
d.
Georges Lemaitre
Feedback
Your answer is correct.
Question 9
Correct
Flag question
Question text
In order for us to convert a continuous time signal to discrete time time, _____is performed.
a.
doping
b.
sampling
c.
signaling
d.
ionization
Feedback
Your answer is correct.
Question 10
Correct
Flag question
Question text
Unprocessed physical quantities such as the audio signal that we hear are in the form of ___.
a.
continuous time
b.
time domain
c.
frequency domain
d.
feedback
Feedback
Your answer is correct.
Question 1
Correct
Flag question
Question text
____is represented by computers. It is where the analysis and decision takes place. Using
computer algorithms, the signals are processed.
a.
Antenna
b.
c.
Inverter
d.
Feedback
Your answer is correct.
Question 2
Correct
Flag question
Question text
From the given analog signal: xa(t) = 4 sin 4000πt + 8 cos 3000πt. Determine the minimum
sampling frequency to avoid aliasing.
a.
2000
b.
4000
c.
3000
d.
2500
Feedback
Your answer is correct.
Question 3
Correct
Flag question
Question text
Unprocessed physical quantities such as the ____ that we hear are in the form of continuous
time.
a.
distortion
b.
discrete time-signals
c.
audio signal
d.
noise
Feedback
Your answer is correct.
Question 4
Correct
Flag question
Question text
Signal which can be expressed in mathematical form example is y = A sin ωtwhere it can be
described as a sinusoidal signal with amplitude, A and is a function of time, t.
a.
Discrete time-signals
b.
Deterministic signal
d.
Noise
Feedback
Your answer is correct.
Question 5
Correct
Flag question
Question text
It states that, for a signal to be properly reconstructed, a signal must be sampled twice the
maximum frequency component of the signal.
a.
Ohm's law
b.
Nyquist theorem
c.
Aliasing
d.
Flag question
Question text
______are signals which are the preprocessed signals which are to be used in digital signal
processing. It is represented mathematically by a sequence of numbers x.
a.
b.
Noise
c.
Alising
d.
Discrete time-signals
Feedback
Your answer is correct.
Question 7
Correct
Question text
The ____converts an analog signal to typically an electrical signal.
a.
Inverter
b.
Transducer
c.
Capacitor
d.
Resistor
Feedback
Your answer is correct.
Question 8
Correct
Flag question
Question text
DSP is a discipline that spans electrical engineering, computing, mathematics and the
physical sciences. It is distinguished from other areas in computer science by the unique
type of data it uses as ____.
a.
noise
b.
alising
c.
signals
d.
current
Feedback
Your answer is correct.
Question 9
Correct
Flag question
Question text
Signal which cannot complete a certain pattern in one cycle.
a.
Ramdon signal
b.
Aperiodic signal
c.
Periodic signal
d.
Distortion
Feedback
Your answer is correct.
Question 10
Correct
Flag question
Question text
____corresponds to how many levels or gradations can be made to a waveform.
a.
Sampling resolution
b.
CRT
c.
Inverter
d.
DSP
Feedback
Your answer is correct.
Question 11
Correct
Question text
____ is a discipline that spans electrical engineering, computing, mathematics and the
physical sciences.
a.
DAC
b.
Inverter
d.
ADC
Feedback
Your answer is correct.
Question 12
Correct
Flag question
Question text
In audio signal processing, a _____acts as the transducer in the system. In communications,
an _____converts electromagnetic waves.
a.
microphone, antenna
b.
capacitor, inductor
c.
antenna,microphone
d.
resistor, antenna
Feedback
Your answer is correct.
Question 13
Correct
Flag question
Question text
From the given analog signal: xa(t) = 4 sin 4000πt + 8 cos 3000πt Determine the frequency
components of the signal.
a.
2000 and 1000
b.
c.
d.
Feedback
Your answer is correct.
Question 14
Correct
Flag question
Question text
Random signal are expressed using____.
a.
probability
b.
multiplication
c.
subtraction
d.
summation
Feedback
Your answer is correct.
Question 15
Correct
Flag question
Question text
Signal which exhibits periodicity or can complete a certain pattern in one cycle.
a.
Noise
b.
Periodic signal
c.
Aperiodic signal
d.
Random Signal
Feedback
Your answer is correct.
Question 16
Correct
Question text
Signal which cannot be expressed in simple mathematical form example is random noise.
a.
Audio Signal
b.
Electromagnetic wave
c.
Non-deterministic signal
d.
Deterministic signal
Feedback
Your answer is correct.
Question 17
Correct
Flag question
Question text
A____ is used to convert digital signals consisting of 0s and 1s to varying analog signals.
a.
Transducer
b.
ADC
c.
Inverter
d.
DAC
Feedback
Your answer is correct.
Question 18
Correct
Flag question
Question text
____are often referred to as analog signals and they take on values in continuous interval (a,
b), where a can be -∞ and b, ∞.
a.
Audio signal
d.
Noise
Feedback
Your answer is correct.
Question 19
Correct
Flag question
Question text
A converter used to change dc voltage into ac voltage.
a.
Generators
b.
Inverter
c.
Prime mover
d.
Motor
Feedback
Your answer is correct.
Question 20
Correct
Flag question
Question text
The main concept behind the ____is that from the electrical signal coming from the
transducer, it is converted into a stream of 0s and 1s which can be read by the digital signal
processor.
a.
Inverter
b.
Signal Processor
c.