Professional Documents
Culture Documents
ECE 424 - Assign2
ECE 424 - Assign2
ECE 424 - Assign2
1. A full bridge inverter is operated from a dc supply of 120Vand in unipolar PWM mode.
Determine
Fundamental output voltage at 𝑀 = 0.6
The first five harmonic order if 𝑀𝑓 = 12
4. A three phase to single phase cycloconverter employs six pulse positive and
negative group converters. Each converter is supplied from delta/star transformer
with per phase turns ratio of 3:1. The supply voltage is 415 V, 60 Hz. The 𝑅𝐿 load has
𝑅 = 20Ω and at low output frequency, 𝜔 𝑜𝐿 = 5Ω. The commutation overlap and
thyristor turn-off time limit the firing in the inversion mode to 160°. Determine:
a) The value of the fundamental RMS output voltage,
b) The RMS output current,
c) The output power.
9. A single-phase full-bridge inverter has the resistive-load of 2.4 Ω and the d.c.
input voltage of 48 V. Determine
a) the RMS output voltage at the fundamental frequency, 𝐸1
b) the output power, 𝑃0 .
c) the average and peak currents of each thyristor, and
d) the peak reverse-blocking voltage of each thyristor.