sa16r2018
Parts Reuse Guidelines
<¢ | Service Bulletin
Service Bulletin Number: 3810303
Released Date: 11-jul-2016
Parts Reuse Guidelines
Parts Reuse Guidelines
This document serves as a placeholder to point to various reuse guidelines.
The legacy information that used to be in Service Bulletin 3810303, titled Parts Reuse
Guidelines, has been moved to Service Bulletin 5411359. The title has been changed from
“Parts Reuse Guidelines” to “Bearing, Counterbore, Cylinder Liner, and Piston Reuse
Guidelines for NH/NT and L10 Engines”
The service bulletins listed below are supplemental to the Service Manual and/or
Troubleshooting and Repair Manual.
The Service Bulletins listed below do not apply to all engines. To check for applicability, do the
following:
1, Read the service bulletin title. If the component or system is not on the engine, then it
does not apply.
a. For example, roller follower tappets vs. sliding tappets.
2. Look for a list of engines or other qualifiers in the title or introduction section of the
document.
a. For example, the service bulletin titled “Single Piece, Open Skirt Piston Reuse
Guidelines’ only applies to a specific subset of X series engines.
Table 1: List of Reuse Guidelines - Base Engine
Service Bulletin
Title
5411359
(Iqs3/pubsys2/xmV/en/bulletin/5411359.html)
Bearing, Counterbore, Cylinder Liner, and
Piston Reuse Guidelines for NH/NT and L10
Engines (Originally created in year 1986)
4021468,
(!qs3/pubsys2/xml/en/bulletin/4021468.html)
Articulated Piston Skirt Reuse Guidelines for
Signature, ISX, and QSX15 Engines
4021925
(/qs3/pubsys2/xml/en/bulletin/4021925.html)
Single Piece, Open Skirt Piston Reuse
Guidelines
4383753,
(/qs3/pubsys2/xml/en/bulletin/4383753.html)
Cylinder Liner Counterbore Ledge Reuse
Guidelines
3810387
(/qs3/pubsys2/xml/en/bulletin/3810387.html)
Analysis and Prevention of Bearing Failures
3666052
(/qs3/pubsys2/xml/en/bulletin/3666052.htm!)
Camshaft Reuse Guidelines for Cummins®
Engines with Roller Followers or Roller
Tappets
hitps/quickserve,cummins.comigsS/pubsys2/xmifenfouletn/3810303.htm!
12sa16r2018
Parts Reuse Guidelines
Table 1: List of Reuse Guidelines - Base Engine
Service Bulletin
Title
3666475
(!qs3/pubsys2/xml/en/bulletin/3666475. html)
Camshaft and Tappet Reuse Guidelines
Table 2: List of Reuse Guidelines - Exhaust
System
Service Bulletin
Title
2883594
(/qs3/pubsys2/xml/en/bulletin/2883594, html)
EGR Cooler Reuse Guidelines for ISX
M871, ISX12/ISX11,9 CM2250, ISX15
M2250, QSX15 CM2250 ECF, QSX11.9
M2250 ECF, PowerGen QSX15 CM2250
ECF, and PowerGen QSX15 CM2250
4367442
(/qs3/pubsys2/xml/en/bulletin/4367442.htm|)
HE300WG Turbocharger Turbine Housing
Reuse Guidelines
4021600
(/qs3/pubsys2/xml/en/bulletin/4021600.html)
Aftertreatment Diesel Oxidation Catalyst and
Aftertreatment Diesel Particulate Filter Reuse
Guidelines
4022032
(/qs3/pubsys2/xml/en/bulletin/4022032. html)
Three Way Catalyst Inspection and Reuse
Guidelines
4325971
(/qs3/pubsys2/xml/en/bulletin/4325971 html)
Aftertreatment Diesel Exhaust Fluid Dosing
and Selective Catalytic Reduction System
Reuse Guidelines
Document History
Date
Details
2016-7-11 Module Created
Last Modified: 09-Sep-2016
hitps/quickserve,cummins.comigsS/pubsys2/xmifenfouletn/3810303.htm!
22