savsi2018 Coolant Fite
Remove
AXWARNING A
Do not remove the pressure cap from a hot engine. Wait
until the coolant temperature is below 50°C [120°F]
before removing the pressure cap. Heated coolant
spray or steam can cause personal injury.
Remove the pressure cap from the radiator.
AXWARNING A
Coolant is toxic. Keep away from children and pets. If
not reused, dispose of in accordance with local
environmental regulations.
Turn the shut off valves on the coolant filter head to the
closed position to prevent water loss.
Note : A V28 engine has two coolant filters.
Remove the coolant filters. Refer to the manufacturer's
instructions regarding the removal of the coolant filters.
install
Apply a light film of oil to the gasket sealing surface before
installing the coolant filter.
Use precaution so that the oil does not enter the filter.
AXCAUTION A
hitps/quickserve.cummins.comigsSipubsys2/xml/en/procedures/15/15-008-006-t:him|
12raroo18 Coolant iter
Mechanical over-tightening can distort the threads or - -
damage the filter head.
Install the coolant filter as specified by the filter
manufacturer.
If the engine is to be run on an engine dynamometer, make
sure the shutoff valves, if equipped, are closed. Open the
valves after the run-in.
Operate the engine until the coolant reaches a temperature
of 85°C [185°F]
Check the engine for leaks.
Last Modified: 13-Feb-2018
hitpsfquickserve.cummins.comigs3/pubsys2/xml/en/procedures/15/15-008-006-t:him| 22