Professional Documents
Culture Documents
2000 Weber Drive, Gainesville, Texas 76240 (940) 668-4100 SITA: GLEWBCR - FAX (940) 668-4195 © 2021 Safran Seats USA LLC
2000 Weber Drive, Gainesville, Texas 76240 (940) 668-4100 SITA: GLEWBCR - FAX (940) 668-4195 © 2021 Safran Seats USA LLC
Pages that have been added or revised are outlined below together with highlights of the revision.
Remove and insert the affected pages as listed below.
Title
(T-1) Revised to reflect this revision.
Record of Revisions
(RR-1) Revised to reflect this revision.
Service Bulletin List
(SB-1) Revised to add SIL 5025 and SB 886184-25-5084r1 to list.
List of Effected Pages
(LEP-1 - LEP-4) Revised to reflect this revision.
Table of Contents
(TOC-2) Revised to reflect this revision.
Disassembly
(3002 - 3004) Revised to update Disassembly Procedures.
Assembly
(7003 - 7006) Revised to update Assembly Procedures.
Illustrated Parts List
(10015, 10040, 10041) Revised Numerical Index to reflect changes in IPLs.
(10006 - 10041) Data movement.
(10048, 10051 - 10058) Revised IPL 1 to incorporate SB 886184-25-5084. Data
movement.
(10051 - 10166) Data movement.
(10065 - 10070) Revised IPL 1A to incorporate SB 886184-25-5084. Data
movement.
(10081, 10090 - 10106) Revised IPL 2 to incorporate SB 886184-25-5084. Data
movement.
(10113, 10115 - 10121) Revised IPL 2A to incorporate SB 886184-25-5084. Data
movement.
(10156 - (10158) Revised IPL 8 to incorporate SB 886184-25-5084. Data
movement.
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
HIGHLIGHTS
Page H-2
25-20-46 Apr 07/21
COMPONENT MAINTENANCE MANUAL
WITH ILLUSTRATED PARTS LIST
PASSENGER SEAT ASSEMBLIES
This document contains proprietary information of Safran Seats USA LLC or contains
proprietary information of others, and is issued in strict confidence. Except for rights
expressly granted by contract, this document can not, in whole or in part, be
duplicated, reproduced electronically or mechanically, disclosed, or used for design or
manufacturing purposes without written authorization from Safran Seats USA LLC.
WARNING:
Export of the technical data in this document (or file) is controlled under the United
States Export Administration Regulations (EAR), 15CFR Parts 730-774. An export
license can be necessary before it is used for development, production or use by
foreign persons from specified countries. The controller of this data has the individual
responsibility to abide by all export laws.
RECORD OF REVISIONS
Retain this record in the front of the manual. Upon receipt of a revision, insert the revised pages
in the manual, enter the revision number, date filed, and initial.
NOTE: Temporary revisions are printed on yellow paper with the heading TEMPORARY
REVISION.
TEMPORARY DATE OF
REVISION DATE INCORPORATION
NUMBER INTO MANUAL
INCORPORATION
SERVICE BULLETIN
INTO CMM TITLE
Number Rev Date
Affects CMM
1 Nov 13/17 Swap Food Trays
883034-25-4743
No Effect
0 Apr 07/21 Inspecting Spreader For Damage
SIL 5025
Affects CMM
1 Apr 07/21 Adding Shims to Armrest Assemblies
886184-25-5084
TABLE OF CONTENTS
Subject Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intro-1
1. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intro-1
2. Product Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intro-1
3. Usage Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intro-1
4. Abbreviations, Acronyms and Unit Symbols . . . . . . . . . . . . . . . . . . . . . . . . . Intro-3
Description and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Leading Particulars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Testing and Fault Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001
1. Operational Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001
2. Fault Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003
Schematics and Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2001
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3001
2. Disassembly Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3002
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4001
2. Cleaning Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4002
Inspection/Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5001
2. Inspection/Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5001
3. Check Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5002
4. Maintenance Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5002
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6001
2. Repair Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6001
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7001
2. Assembly Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7003
Fits and Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8001
2. Adjustment Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8001
3. Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8007
4. Hardware Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8009
Special Tools, Fixtures, Equipment and Consumables . . . . . . . . . . . . . . . . . . . . . . . . . 9001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9001
Illustrated Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10001
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10001
2. Scope of Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10001
3. Equipment Designator Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10001
4. Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10001
5. Explanation of Detail Parts List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10002
6. Manufacturers Names and Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10004
Storage (Including Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15001
1. Storage Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15001
LIST OF ILLUSTRATIONS
Figure Title Page
LIST OF TABLES
Table Title Page
1 Passenger Seat Part Number Coverage Model Z100 T/C Seat Assemblies . 31
2 Seat Dimension Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
1001 Fault Isolation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003
4001 Cleaning Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4001
4002 Solvent Selection For Hand Cleaning Components . . . . . . . . . . . . . . . . . . . . 4006
5001 Check Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5003
6001 Recommended Repair Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6001
6002 Bonding with Epoxy and High Strength Adhesives . . . . . . . . . . . . . . . . . . . . 6006
7001 Recommended Assembly Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7002
8001 Nut Tightening Torque Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8012
8002 Allowable Gap For Installed Nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8014
8003 Breakaway Torque Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8015
9001 Special Tools, Fixtures and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9001
9002 Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9003
INTRODUCTION
1. Scope
Replacement parts, technical publications, and other product support services are available
from Safran Seats USA LLC:
3. Usage Guide
(2) TESTING AND FAULT ISOLATION. This section details testing and
troubleshooting a fully assembled passenger seat.
(4) DISASSEMBLY. This section details the disassembly procedure for parts that need
to be removed to allow visual inspection of the passenger seats and for parts that
can be removed.
(5) CLEANING. This section provides a list of cleaning materials and instructions for
cleaning the passenger seats.
(7) REPAIR. This section provides a list of all materials necessary for the passenger
seats and repair or replacement instructions that refers to the procedure for the
removal, disassembly, repair, reassembly, and installation of all parts not listed in
DISASSEMBLY.
(8) ASSEMBLY. This section includes a list of all materials necessary during assembly,
and the assembly procedures for all parts disassembled in DISASSEMBLY.
REPAIR details the assembly procedure for all parts not specified in this section.
(9) FITS AND CLEARANCES. This section contains fits and clearance for the
passenger seats including torque tables, adjustments, and general installation
information. It also gives the permitted wear tolerances for in-service and the seat
manufacturer’s design wear tolerances.
(11) ILLUSTRATED PARTS LIST. This section contains a full list of spare parts for the
passenger seats with an alphanumeric index listed in the front.
B. The sections contain a table of recommended tools and materials, when applicable.
Equivalent items can be used.
D. Verification.
Abbreviations and unit symbols used in this manual are defined below. All weights and
measurements are given first in English standard units followed by the metric equivalent in
brackets.
Symbol/ Symbol/
Abbr. Term Abbr. Term
° Degree mm Millimeter
± Plus or Minus mmHg Millimeter of Mercury
– Not Illustrated Min Minimum
°C Degrees Celsius MOD Modified
°F Degrees Fahrenheit Nꞏm Newton Metre
AR or A/R As Required. Indicates that an NARR Narrow
indefinite quantity is necessary. NHA Next higher assembly
AY Assembly NP Not Procurable
BAG Baggage OEM Original Equipment
BND Bonded Manufacturer
BTM Bottom OFST Offset
CAGE Commercial And Government OPT Optional
Entity OUTBD Outboard
cm Centimeter PAX Passenger
CMM Component Maintenance P/O Part Of
Manual PN Part Number
Cont Continued RF or REF Reference. Indicates those
CTR Center parts which have their require-
DBL Double ments listed elsewhere in the
DETS Details parts list.
EFF Effectivity RECL Recline
F/R Front Row REPLD Replaced
FBLK Fireblocking REPLS Replaces
Fig. Figure REV Revision
FWD Forward RH Right-hand
HDCP Handicap RVT Riveted
IFE In Flight Entertainment SB Service Bulletin
IAT In-Arm Table SRP Seat Reference Point
in Inch SSUSA Safran Seats USA LLC
in/lb Inch Pound STD Standard
INBD Inboard SUPSD Superseded
INSTL Installation SUPSDS Supersedes
IPL Illustrated Parts List T/C Tourist Class
kg Kilograms TBL Table
kPa Kilopascal TPL Triple
lb Pound TSO Technical Standard Order
LH Left-hand U/O Used On
LIT Literature
Max Maximum
A. General.
The passenger seats feature maximum comfort design and consist of an aluminum
frame to which are attached reclining seat backs, center armrest assemblies, armrest
food table assemblies and fully upholstered seat back and bottom cushion assemblies.
The passenger seats are installed and attached to the metal floor tracks located in the
aircraft cabin by track attachment fittings at each front and rear leg. Seat dimensions are
shown in Figure 1. Seat dimensions not shown are the same as the opposite view. Refer
to Table 2 for dimension tolerances.
B. TSO Limitations.
The conditions and tests necessary for TSO approval of these articles are minimum
performance standards. It is the responsibility of those desiring to install the articles
either on or within a specified type or class of aircraft to determine that the aircraft
installation conditions are within the TSO standards. If not within the TSO standards, the
articles can be installed only if further evaluation by the applicant documents an
acceptable installation and is approved by the Administrator.
NOTE: When the TSO Seats contain electronic components, certain attributes have
been addressed as part of the TSO seat design following the guidance in FAA
Advisory Circular AC21-49, Section 7.b. The remaining component attribute
justifications remain the responsibility of the seat installer.
C. Conformity to Certification.
The numerous requirements for demonstrating that a “seat system” meets all the static
and dynamic loads, the permanent deformation limitations, and the injury criteria, imply
that individual elements of a seat system cannot be evaluated independently from each
other. This difficulty translates into keeping the chain of structures and other essential
features affecting the performance of the “seat system” intact as certificated.
The performance of the components, the behavior of which are critical to the overall
system, are numerous. These include, but are not limited to the seat belt, the bottom
cushions, the padded back assemblies, the seat back weight and vertical center of
gravity, the impact surfaces on the back such as back mounted tables and appliances,
the total mass of the seat, any structural load path active in a primary or secondary
fashion in restraining the passenger to the seat and to the aircraft. Additionally, the seat
back upright setting, back breakover (if any and degrees), seat pitch, aircraft track, track
fitting, track adapter, angle of the seat with respect to the aircraft axis (e.g., non-constant
section), baggage bar design, IFE support installation on legs, retention of deployable
items, such as tables, video and others, all have significant impact on the certification.
Modifications by a non OEM; or the replacement of a non OEM component, will
invalidate the OEM’s TSO certification.
25-20-46 Page 1
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
D. Safety Considerations.
Each back incorporates padded material to protect against head strike injury and is
contoured to fit a passenger of varied dimensions yet provide optimum comfort.
The seat bottom structure (base frame assembly) is designed to eliminate any
protrusions, edges, or projections which might penetrate the various cushions during
vertical movements. All areas a passenger can touch are free of projections which might
cause injury or damage to clothing.
Bottom and back cushion assemblies have fireblocking covers. Life vest assemblies are
also provided.
E. Seat Backs.
The seat backs incorporate design features which provide maximum comfort with
minimum interference for ingress and egress of passengers when installed in the
aircraft. A literature pocket is located at the rear of each back assembly. Seat back
recline is hydraulically controlled.
Front row seat assemblies are equipped with armrest-mounted food table assemblies
which are located inside the IAT armrest assemblies. This type of food table is brought
into use by opening the armcap and lifting the table out. The table then raises out of the
armrest structure and unfolds for passenger use.
All tourist class seat assemblies are equipped with a back-mounted food table
assembly.
All tourist class seat assemblies are equipped with directional food tray latches. All exit
seat table latches open toward aisle and all non-exit seat table latches open towards
wall.
H. Handicap Armrests.
All standard seat assemblies are equipped with an aisle-side handicap armrest with a
discrete latching device.
25-20-46 Page 2
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
2. Operation
A. General.
Seat assemblies are attached to the aircraft floor and sidewall by shear pin assemblies
and anti-rattle track fittings located at the base of the leg assembly. Place seat on aircraft
floor and sidewall track and slide forward or aft direction to necessary station number
location. Track fittings must align with tracks when tightened to be correctly installed.
(Refer to FITS AND CLEARANCES.)
B. Seat Backs.
The seat back recline can be adjusted (more or less recline) to the necessary recline
position by actuating the recline control. The seat backs are movable from fully upright
to fully reclined position. The seat backs are spring-loaded to return to full upright
position by actuating the recline control and removing all pressure applied against the
seat back.
These type food tables are brought into use by opening the armcap and swinging the
table out of the armrest structure. Swing the table up to the vertical position and hinge
down into position. To return to its stored position, raise the table upright and rotate,
gently forcing the table assembly into the recess of the armrest structure and closing the
armcap. The food tables are of bi-fold configuration and can be used as a cocktail tray
or folded out for full tray use.
This type food table is brought into use by using the food table latch assembly to unlatch
the food table. Once the table is released, allow table to come down to the use position,
Pull the table out to the fully deployed position. To attach table in the non-use position,
push table in then fold the table up and in to the back recess. Attach table with food table
latch.
E. Handicap Armrests.
To place arm in upright position, press the discrete arm latch located under the arm
(aisle arm only). Lift the front of the arm up, rotating the arm backwards along the side
of the back assembly. To return the arm to the horizontal position, pull down on the front
of the arm by rotating it forward and down until positive engagement of the discrete arm
latch can be heard.
25-20-46 Page 3
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
882157-401 (SHOWN)
882157-402 (OPP)
TPL, F/R, IAT
HDCP
ARM
882157-403 (SHOWN)
882157-404 (OPP)
TPL, STD
882157-405 (SHOWN)
882157-406 (OPP)
TPL, STD, FWD EXIT
882157-435 (SHOWN)
882157-436 (OPP)
TPL, STD, AFT
25-20-46 Page 4
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
HDCP
ARM
882157-407 (SHOWN)
882157-408 (OPP)
TPL, STD, EXIT
882157-409 (SHOWN)
882157-410 (OPP)
TPL, STD, AFT EXIT
HDCP
ARM
882157-411 (SHOWN)
882157-412 (OPP)
TPL, STD, NRW
882157-437, -445 (SHOWN)
882157-438, -446 (OPP)
TPL, STD, NRW, OUTBD PAX AFT
882157-439 (SHOWN)
882157-440 (OPP)
TPL, STD, NRW, AFT
25-20-46 Page 5
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
HDCP
ARM
882157-413 (SHOWN)
882157-414 (OPP)
TPL, STD, NRW
HDCP
ARM
882157-415 (SHOWN)
882157-416 (OPP)
TPL, STD, AFT, NRW
25-20-46 Page 6
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
HDCP
ARM
25-20-46 Page 7
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
HDCP
ARM
HDCP
ARM
25-20-46 Page 8
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
HDCP
ARM
(882157-432 SHOWN AT
EXIT DOORS 2 & 3)
882157-431 (SHOWN)
882157-432 (OPP)
DBL, AFT
HDCP
ARM
882157-433 (SHOWN)
882157-434 (OPP)
DBL, STD, AFT
25-20-46 Page 9
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
882157-441 (SHOWN)
882157-442 (OPP)
DBL, F/R, IAT
882157-443 (SHOWN)
882157-444 (OPP)
TPL, STD, OUTBD PAX IAT
25-20-46 Page 10
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
STD TPL
AISLE SIDE VIEW
(882157-403, -404, -405, -406, -407, -408,
-409, -410, -411, -412, -413, -414, -423,
-424, -425, -426, -427, -428, -429, -430,
-435, -436, -437, -438, -445, -446, -451, -452
-453, -454, -455, -456, -457, -458)
(882157-415, -416
-417, -418)
25-20-46 Page 11
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 12
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 13
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
20
19
25-20-46 Page 14
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
3 882157-403 11 882157-411
4 882157-404 12 882157-412
5 882157-405 19 882157-419
6 882157-406 20
25-20-46 Page 15
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
22 24 24 24 24 24 24 24 24 24 26 28 30
21 23 23 23 23 23 23 23 23 23 25 27 29
24 24 24 24 24 24 24 24 24 24 24 24 24 24 12 12 14 16
23 23 23 23 23 23 23 23 23 23 23 23 23 23 11 11 13 15
15 882157-415 25 882157-425
16 882157-416 26 882157-426
25-20-46 Page 16
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
22 24 24 24 24 24 24 24 24 24 26 28 30
21 23 23 23 23 23 23 23 23 23 25 27 29
24 24 24 24 24 24 24 24 24 24 24 24 24 24 12 18
23 23 23 23 23 23 23 23 23 23 23 23 23 23 11 17
17 882157-417 25 882157-425
18 882157-418 26 882157-426
21 882157-421 27 882157-427
22 882157-422 28
25-20-46 Page 17
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
22 24 24 24 24 24 24 24 36 22 24 24 24 24 24 24 24 24
32
31
21 23 23 23 23 23 23 23 35 21 23 23 23 23 23 23 23 23
24 24 24 36 22 24 24 24 24 24 24 24 24 24 24 12 20
32
31
23 23 23 35 21 23 23 23 23 23 23 23 23 23 23 23 37 33
25-20-46 Page 18
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
22 24 24 24 24 24 24 24 24 40 42 44 24 24 24 24 24 24 24
21 23 23 23 23 23 23 23 23 39 41 23 23 23 23 23 23 23
24 24 24 24 36 22 24 24 24 24 24 24 24 24 24 24 38
32 34
31
23 23 23 23 35 21 23 23 23 23 23 23 23 23 23 23 39
25-20-46 Page 19
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
50 52 52 52 52 52 52 52 52 52 54 56 58
49 51 51 51 51 51 51 51 51 51 53 55 57
52 52 52 52 52 52 52 52 52 52 52 52 52 52 46 48
51 51 51 51 51 51 51 51 51 51 51 51 51 51 45 47
25-20-46 Page 20
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 21
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 22
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 23
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 24
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 25
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
25-20-46 Page 26
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A
25-20-46 Page 27
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B B B B B
25-20-46 Page 28
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A
25-20-46 Page 29
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
B B B B B B B B B B B B B B B B B B
B
B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B B B B B B
B B B B B B B B B B B B B B B B B B
25-20-46 Page 30
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
3. Leading Particulars
The following Tables provide a list of all seat assemblies contained in the seat installations
included in this manual. Refer to the IPL section of the manual for additional information on
particular seat assembly usage, etc.
SSUSA
Description Aircraft Installation
Part No.
882157-401 SEAT AY, MODEL Z100 T/C, LH F/R TPL, IAT, 4” RECL 882156-4010, -4030,
-4050, -4070, -4090,
-4110
882157-402 SEAT AY, MODEL Z100 T/C, RH F/R TPL, IAT, 4” RECL 882156-4010, -4030,
-4050, -4070, -4090,
-4110
882157-403 SEAT AY, MODEL Z100 T/C, LH STD TPL, 4" RECL 882156-4010, -4030,
-4050, -4070, -4090,
-4110
882157-404 SEAT AY, MODEL Z100 T/C, RH STD TPL, 4" RECL 882156-4010, -4030,
-4050, -4070, -4090,
-4110
882157-405 SEAT AY, MODEL Z100 T/C, LH STD TPL, FWD EXIT, 882156-4010, -4030,
OUTBD PAX LIMITED RECLINE, 3” & 4” RECL -4050, -4070, -4090,
-4110
882157-406 SEAT AY, MODEL Z100 T/C, RH STD TPL, FWD EXIT, 882156-4010, -4030,
OUTBD PAX LIMITED RECLINE, 3” & 4” RECL -4050, -4070, -4090,
-4110
882157-407 SEAT AY, MODEL Z100 T/C, LH STD TPL, EXIT, NO 882156-4010, -4030,
RECLINE, NO OUTBD ARM, 0” & 4” RECL -4050, -4070
882157-408 SEAT AY, MODEL Z100 T/C, RH STD TPL, EXIT, NO 882156-4010, -4030,
RECLINE, NO OUTBD ARM, 0” & 4” RECL -4050, -4070
882157-409 SEAT AY, MODEL Z100 T/C, LH STD TPL, AFT EXIT, NO 882156-4010, -4030,
OUTBD ARM, 4” RECL -4050, -4070, -4090,
-4110
882157-410 SEAT AY, MODEL Z100 T/C, RH STD TPL, AFT EXIT, NO 882156-4010, -4030,
OUTBD ARM, 4” RECL -4050, -4070, -4090,
-4110
25-20-46 Page 31
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
SSUSA
Description Aircraft Installation
Part No.
882157-411 SEAT AY, MODEL Z100 T/C, LH STD TPL, NARR, 4" 882156-4010, -4030,
RECL -4050, -4070, -4090,
-4110, -4130, -4150,
-4170, -4190
882157-412 SEAT AY, MODEL Z100 T/C, RH STD TPL, NARR, 4" 882156-4010, -4030,
RECL -4050, -4070, -4090,
-4110, -4130, -4150,
-4170, -4190, -4210,
-4230
882157-413 SEAT AY, MODEL Z100 T/C, LH STD TPL, NARR, 4” RECL 882156-4010, -4030,
-4130, -4150
882157-414 SEAT AY, MODEL Z100 T/C, RH STD TPL,NARR, 4" RECL 882156-4010, -4030,
-4130, -4150
882157-415 SEAT AY, MODEL Z100 T/C, LH STD TPL, NARR AFT, NO 882156-4010, -4030,
RECL -4130, -4150
882157-416 SEAT AY, MODEL Z100 T/C, RH STD TPL,NARR AFT, NO 882156-4010, -4030,
RECL -4130, -4150
882157-417 SEAT AY, MODEL Z100 T/C, LH STD TPL, NARR AFT, NO 882156-4170, -4190
RECL
882157-418 SEAT AY, MODEL Z100 T/C, RH STD TPL, NARR AFT, NO 882156-4170, -4190
RECL
882157-419 SEAT AY, MODEL Z100 T/C, LH STD TPL, NARR AFT, 4” 882156-4050, -4070,
RECL -4090, -4110
882157-420 SEAT AY, MODEL Z100 T/C, RH STD TPL, NARR AFT, 4” 882156-4050, -4070,
RECL -4090, -4110, -4210,
-4230
882157-421 SEAT AY, MODEL Z100 T/C, LH F/R TPL, IAT, 4” RECL 882156-4130, -4150,
-4170, -4190, -4210,
-4230, -4250, -4270
882157-422 SEAT AY, MODEL Z100 T/C, RH F/R TPL, IAT, 4” RECL 882156-4130, -4150,
-4170, -4190,-4210,
-4230, -4250, -4270
25-20-46 Page 32
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
SSUSA
Description Aircraft Installation
Part No.
882157-423 SEAT AY, MODEL Z100 T/C, LH STD TPL, 4” RECL 882156-4130, -4150,
-4170, -4190,-4210,
-4230, -4250, -4270
882157-424 SEAT AY, MODEL Z100 T/C, RH STD TPL, 4” RECL 882156-4130, -4150,
-4170, -4190, -4210,
-4230, -4250, -4270
882157-425 SEAT AY, MODEL Z100 T/C, LH STD TPL, FWD EXIT, 882156-4130, -4150,
OUTBD PAX LIMITED RECL, 3” & 4” RECL -4170, -4190
882157-426 SEAT AY, MODEL Z100 T/C, RH STD TPL, FWD EXIT, 882156-4130, -4150,
OUTBD PAX LIMITED RECL, 3” & 4” RECL -4170, -4190
882157-427 SEAT AY, MODEL Z100 T/C, LH STD TPL, EXIT, NO 882156-4130, -4150,
RECLINE, NO OUTBD ARM, 0” & 4” RECL -4170, -4190
882157-428 SEAT AY, MODEL Z100 T/C, RH STD TPL, EXIT, NO 882156-4130, -4150,
RECLINE, NO OUTBD ARM, 0” & 4” RECL -4170, -4190
882157-429 SEAT AY, MODEL Z100 T/C, LH STD TPL, AFT EXIT, NO 882156-4130, -4150,
OUTBD ARM, 4” RECL -4170, -4190
882157-430 SEAT AY, MODEL Z100 T/C, RH STD TPL, AFT EXIT, NO 882156-4130, -4150,
OUTBD ARM, 4” RECL -4170, -4190
882157-431 SEAT AY, MODEL Z100 T/C, LH STD DBL, AFT, NRW, 4” 882156-4210, -4230,
RECL -4250, -4270
882157-432 SEAT AY, MODEL Z100 T/C, RH STD DBL, AFT, 4” RECL 882156-4210, -4230,
-4250, -4270
882157-433 SEAT AY, MODEL Z100 T/C, LH STD DBL, AFT, 4” RECL 882156-4210, -4230
882157-434 SEAT AY, MODEL Z100 T/C, RH STD DBL, AFT, 4” RECL 882156-4250, -4270
882157-435 SEAT AY, MODEL Z100 T/C, LH STD TPL, OUTBD PAX 882156-4210, -4230,
AFT, 4” RECL -4250, -4270
882157-436 SEAT AY, MODEL Z100 T/C, RH STD TPL, OUTBD PAX 882156-4210, -4230,
AFT, 4” RECL -4250, -4270
882157-437 SEAT AY, MODEL Z100 T/C, LH STD TPL, NRW, 4” RECL 882156-4210, -4230
882157-438 SEAT AY, MODEL Z100 T/C, RH STD TPL, NRW, 4” RECL 882156-4250, -4270
25-20-46 Page 33
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
SSUSA
Description Aircraft Installation
Part No.
882157-439 SEAT AY, MODEL Z100 T/C, LH STD TPL, AFT NRW, 4” 882156-4250, -4270
RECL
882157-440 SEAT AY, MODEL Z100 T/C, RH STD TPL, AFT NRW, 4” 882156-4250, -4270
RECL
882157-441 SEAT AY, MODEL Z100 T/C, LH F/R DBL, IAT, NRW, 4” 882156-4250, -4270
RECL
882157-442 SEAT AY, MODEL Z100 T/C, RH F/R DBL, IAT, NRW, 4” 882156-4250, -4270
RECL
882157-443 SEAT AY, MODEL Z100 T/C, LH STD TPL, OUTBD PAX 882156-4250, -4270
IAT, 4” RECL
882157-444 SEAT AY, MODEL Z100 T/C, RH STD TPL, OUTBD PAX, 882156-4250, -4270
4” RECL
882157-445 SEAT AY, MODEL Z100 T/C, LH STD TPL, NRW, 4” RECL 882156-4290
882157-446 SEAT AY, MODEL Z100 T/C, RH STD TPL, NRW, 4” RECL 882156-4290
882157-447 SEAT AY, MODEL Z100 T/C, LH STD TPL, NRW, AFT, NO 882156-4290
RECL
882157-448 SEAT AY, MODEL Z100 T/C, RH STD TPL, NRW, AFT, NO 882156-4290
RECL
882157-449 SEAT AY, MODEL Z100 T/C, LH F/R TPL, IAT, 4” RECL 882156-4290
882157-450 SEAT AY, MODEL Z100 T/C, RH F/R TPL, IAT, 4” RECL 882156-4290
882157-451 SEAT AY, MODEL Z100 T/C, LH STD TPL, 4” RECL 882156-4290
882157-452 SEAT AY, MODEL Z100 T/C, RH STD TPL, 4” RECL 882156-4290
882157-453 SEAT AY, MODEL Z100 T/C, LH STD TPL, FWD EXIT 882156-4290
(OUTBD PAX LIMITED RECL) 3 & 4” RECL
882157-454 SEAT AY, MODEL Z100 T/C, RH STD TPL, FWD EXIT 882156-4290
(OUTBD PAX LIMITED RECL) 3 & 4” RECL
882157-455 SEAT AY, MODEL Z100 T/C, LH STD TPL, EXIT, (NO 882156-4290
OUTBD ARM), NO RECL
25-20-46 Page 34
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
SSUSA
Description Aircraft Installation
Part No.
882157-456 SEAT AY, MODEL Z100 T/C, RH STD TPL, EXIT, (NO 882156-4290
OUTBD ARM), NO RECL
882157-457 SEAT AY, MODEL Z100 T/C, LH STD TPL, AFT EXIT, (NO 882156-4290
OUTBD ARM), 4” RECL
882157-458 SEAT AY, MODEL Z100 T/C, RH STD TPL, AFT EXIT, (NO 882156-4290
OUTBD ARM), 4” RECL
25-20-46 Page 35
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
Tolerance Description
± 0.03 inch [± 0.08 cm] HMAR (Hatch Mounted Armrest) Hole Spacing
Stud to Stud
± 1° Seat Breakover
25-20-46 Page 36
Jan 15/2020
SAFRAN SEATS USA LLC
COMPONENT MAINTENANCE MANUAL
PART NO. 882157
(1) With all seat backs in full upright position, visually check alignment of seat backs
against each other, none should be obviously out of alignment.
(a) If the seat is on a known flat and level surface, place a plumb-bob over the top
of each seat back at the center, and measure the distance from the centerline
of the front track fitting of the seat (Ref. Fig. 1 DESCRIPTION AND
OPERATION section) to the plumb-bob; measurements shall be as indicated
on Figure 1.
(b) If the seat is not on a flat and level surface, measure the distance from the
center of the seat back to centerline of the front track fitting of the seat (Ref.
Fig. 1, DESCRIPTION AND OPERATION section). Use a tool that can allow
for an unlevel condition. These tools can include, but are not limited to, a level,
square, linear scale, special templates and/or a straight edge.
(3) If dimensions measured in step (2) above are off, refer to FITS AND
CLEARANCES, paragraph 2.B and 2.C.
(4) In the recline mode, press recline control button on armrest while applying a force
(4.0 to 8.0 lb [1.8 to 3.6 kg]) to top of seat back assembly. Seat back shall move to
full recline position, or stop automatically at any position when the recline control
button is released.
(5) If seat back does not fully recline refer to fully reclined dimension specified in Fig.
1. Adjust in accordance with FITS AND CLEARANCES, paragraph 2.B and 2.C.
(6) With seat back in fully reclined position, remove any pressure applied to seat back,
and depress recline control button. Seat back shall automatically return to the full
upright position.
(7) If depressing recline control does not release seat back for recline adjustment,
make sure that recline control is attached to recline lock; then adjust recline control
operation so that plunger on end of recline lock is pushed in when recline lock
control button is depressed. If this adjustment does not get satisfactory operation;
(b) Replace recline control if depressing recline control button causes insufficient
movement at recline lock end of control.
(1) Visually check position of food table in stowed position; tables shall be flush with
seat back, with no obvious protrusion.
(2) If table is not flush, refer to FITS AND CLEARANCES, paragraph 2.A.
(3) Rotate latch handle and allow food table to drop into the “in use” position. Check
that food table is level with cabin floor. Check height (refer to Figure 1).
(1) Visually check hinged armcap assemblies and table module assemblies. There
should be no obvious misalignment.
(2) Pull table assembly out of armrest and swing into “use” position. Movement should
be smooth with no binding and table should be in a correct “in use” configuration.
(3) Adjust food table as necessary, refer to FITS AND CLEARANCES, paragraph 2.E
for IAT table adjustment.
(1) Visually check alignment of armrest “in use” position. There should be no obvious
misalignment with other arms.
(2) If alignment is incorrect, check all engaging parts for wear and/or obstructions that
me be preventing armrest from fully folding or permitting excessive downward
positioning. Replace any defective parts. Adjust setscrew on center support to get
correct height.
(3) Grasp each folding armrest at forward end and pull up to stowed position between
seat backs. Force necessary should be approximately 8 lb [4 kg] to prevent free fall
from stowed position.
(1) Track fittings must align with tracks when tightened to be correctly installed.
(2) If the track fittings do not lock tightly into the floor tracks, refer to FITS AND
CLEARANCES, paragraph 2.D.
2. Fault Isolation
Troubles encountered with mechanical operation of the seat assembly will largely be the
result of incorrect adjustments. In addition, after overhaul and adjustment, mechanical
functions can be a bit “stiff”. Stiffness in operation will reduce after some “break-in” use.
Troubles likely to be encountered, together with probable causes and corrective actions are
listed in Table 1001.
Recline control will not move Broken or malfunctioning control Adjust or replace malfunctioning
or does not unlock seat back. component. (Refer to FITS AND
CLEARANCES, paragraph 2.B or
2.C).
Seat backs do not align in Incorrect adjustment of recline Adjust or replace malfunctioning
upright position. control setting component. (Refer to FITS AND
CLEARANCES, paragraph 2.B or
2.C).
Seat loose in floor track of Lug fitting on aft and/or forward Tighten lug fitting on track fitting.
aircraft. track fitting loose (Refer to FITS AND
CLEARANCES, paragraph 2.D).
In-Arm food tables do not Adjustment not correct Adjust as necessary. (Refer to FITS
align in “use” or “stow” AND CLEARANCES, paragraph
configurations. 2.E).
Food table not at correct Adjustment of screw not Adjust screw as necessary. (Refer
height in serving position correctly set to FITS AND CLEARANCES,
(back-mounted). paragraph 2.A).
Food table will not fold flush Adjustment of screw not Adjust screw as necessary. (Refer
into seat back recess (back- correctly set to FITS AND CLEARANCES,
mounted). paragraph 2.A).
Folding arms are out of Latch assembly damaged Replace damaged component.
alignment.
Video installation does not Refer to manufacturers manual Remove and replace defective part.
operate correctly.
There are no critical schematics or wiring diagrams applicable to the parts specified for the
seat assembly in this manual.
DISASSEMBLY
1. General
B. Partial repair of some assemblies can be performed without removing the particular
assembly from the aircraft.
C. Full disassembly of the seat is neither anticipated nor recommended. Remove only
those parts necessary to gain access to those worn or damaged part(s) for which
replacement is necessary. To assist in disassembly, a frame or fixture to simulate the
related aircraft floor mounting provisions is recommended.
2. Disassembly Procedures
A. Model Z100 Tourist Class Front Row Triple Seat Assembly. (IPL Figure 1)
(1) Remove dress appearance items and set aside in a dry, clean area.
B. Model Z100 Tourist Class Front Row Double Seat Assembly. (IPL Figure 1A)
(1) Remove dress appearance items and set aside in a dry, clean area.
C. Model Z100 Tourist Class Standard Triple Seat Assembly. (IPL Figure 2)
(1) Remove dress appearance items and set aside in a dry, clean area.
D. Model Z100 Tourist Class Standard Double Seat Assembly. (IPL Figure 2A)
(1) Remove dress appearance items and set aside in a dry, clean area.
(2) Refer to DISASSEMBLY, paragraph 2.H. for back assembly (495 thru 495E), 2.I.
for leg assembly (520 thru 520C), 2.J. for side spreader assembly (525 thru 525C,
545, 545A) and 2.K. for center spreader assembly (550 thru 550B).
(1) Remove table from seat assembly by removing screws (Ref. 75, IPL Fig. 1 and 1A,
and 70, IPL Fig. 2).
(1) Remove knuckle assembly (5, 5A) by removing screw (10) and washers (15).
Remove spacer (20) by removing retaining ring (30) and lock screw (25).
(3) Remove paddle arm assembly (45, 45A) by removing screw (50). Remove slide
(55, 55A) from paddle by removing screws (60).
(2) Remove armcap assembly (15, 15A) by removing screws (20). Remove bracket
(p/o armcap) (25) by removing screws (30).
(1) Remove lit pocket spring (5 thru 5B) by removing screws (10), washers (15 thru
20A) and nuts (25).
(2) Remove quadrant arm assemblies (35 thru 35D) by removing bolt (40), washers
(45, 50), spacer (55, 55A), bushing (60) and nut (65).
(3) Disassemble quadrant arm assembly by removing screw (75, 75A), bushing (90),
washers (80) and nut (85) used to attach plate (70, 70A).
(1) Loosen and remove bolts (120 thru 120D), washers (125) and nuts (130) from leg
(140 thru 140C).
(2) Remove base assembly (5, 5A) by removing bolts (10 thru 15A), washers (20 thru
20B) and nut (25 thru 25B). Remove bushings (30, 30A).
(3) Remove strut assembly (95, 95A) by removing bolt (100, 100A), washers (105,
105A) and nut (110, 110A). Remove bushing (115, 115A).
(1) Remove swivel link assembly (5) by removing bolt (10, 10A), washers (15) and nut
(20). Remove spacer (25).
(2) Remove seat belt link (35) by removing screw (40), washer (45), spacer (50) and
nut (55).
(3) 873286-401, -402, 882196-411, -412 only: Remove lockout mechanism (105) by
removing cap screw (110). Remove spring (115).
(4) Disassemble swivel link assembly (180) by removing screw (190), nut (205),
washer (195) and spacer (200).
(5) Remove bolts (140 thru 140B), washers (145, 145A) and nuts (150).
(6) Remove upper canted spreader (215 thru 215C) by removing bolts (220), washers
(225) and nuts (230).
(1) Remove swivel link assembly (5 thru 5B) by removing bolt (10, 10A), washers (15)
and nut (20). Remove spacer (25 thru 25C).
(2) Remove seat belt link (35, 35A) by removing screw (40), washer (45), spacer (50)
and nut (55).
(3) Disassemble swivel link assembly (150, 150A) by removing screw (160), nut (175),
washer (165) and spacer (170) from swivel link (155).
(4) Remove bolts (110 thru 110D), washers (115, 115A) and nuts (120).
(5) Remove offset spreader (190 thru 190E, 195, 195A) by removing bolts (200),
washers (205) and nuts (210). Remove spacers (215).
(6) 874616-417, -418 only: Remove adapter (220, 220A) by removing bolts (225) and
washers (230).
CLEANING
1. General
NOTE: Refer to Table 4002 for recommended solvent selections for hand cleaning.
Cleaning Materials
Table 4001
Material Identification Source Use
Cleaning Materials
Table 4001
Material Identification Source Use
2. Cleaning Procedures
A. Non-Upholstered Parts.
(2) Clean metal parts with Aliphatic Naphtha specified in Table 4001. Dry with a clean,
lint-free cloth or allow to air dry.
(3) Remove any stains or deposits on non-electrical metal parts not removed by
Aliphatic Naphtha with a cloth moistened with Acetone or Methyl Propyl Ketone
(refer to Table 4001).
(4) Remove any signs of corrosion with corrosion removing compound (refer to Table
4001).
B. Upholstery.
(1) Vacuum upholstery thoroughly or brush with a medium stiff bristle upholstery or
clothes brush. Do not pound or beat upholstered covers as this does not effectively
clean the upholstery and can hasten its wear.
(3) Oil-type grease stains are best removed with solvent-type cleaning fluid such as
DuPont Dry Cleaner (refer to Table 4001) or with solvent impregnated Powderene
powder (refer to Table 4001). Test material to be cleaned by first applying cleaning
agent to a small inconspicuous area of the material. Use cleaning agents sparingly,
without saturating fabric, to prevent staining and damage. Apply cleaning agent
with a soft clean cloth and prevent spreading any stains by working from outer
edges toward center of stain.
(4) After using upholstery shampoo or solvent-type cleaning agent, roll a clean,
Turkish towel, or other absorbent cloth, into a cylindrical shape and wipe off
detergent and dirt. Rotate rolled cloth frequently to present a clean section to the
fabric surface.
NOTE: Dirt and soil are absorbed or moved to the clean towel from the fabric. It
can be necessary to apply force when rubbing fabric to get even soil
removal and to prevent stained or blotched appearance after drying.
(5) Prepare seat covers for dry cleaning by covering all hook tape with corresponding
pile tape. Heavy stains should be pretreated as outlined in steps (2) and (3) above.
Turn seat covers inside out during actual dry cleaning procedure.
(6) After completion of dry cleaning process, waterbound stains can be removed
secondarily with steam and detergent preparations as outlined in step (2) above.
C. Metal Parts.
(1) Moisten a clean, dry cloth with a chlorinated dry cleaning solvent and thoroughly
wipe metal parts fully clean. Do again as necessary to remove stubborn
accumulation of dirt and grease. Dry with a fresh, clean, dry cloth.
D. Fabric-Backed Vinyls.
(1) This type of material should be cleaned with a mild soap and water solution, such
as Ivory Liquid Soap, and wiped clean and dry. Do not use solvent-type cleaners.
(1) Regular cleaning can be done simply by using a damp cloth, taking care not to soak
the leather. Wring out a soft cloth in soap suds (mild toilet soap and do not use a
detergent). Apply to the surface of the leather in a light, circular motion until the dirty
parts are clean. Do this procedure again with clean cloth and clean water.
(2) Proprietary products, made by leather manufacturers, are available. These neutral
creams or waxes are designed to restore the original sheen. These should not be
used until the leather has first been cleaned with a damp clean cloth as outlined in
step (1) above.
F. Plastic.
(1) Extreme care should be taken in cleaning all plastic. Do not use abrasive soaps
and bleaches to clean any plastic materials. All plastic surfaces should be cleaned
with a mild soap and water solution or recommended plastic cleaner, such as those
mentioned below.
(2) Mix liquid soap or plastic cleaner with water to necessary concentration, depending
on strength needed for cleaning purposes. Apply solution directly to surface and
rub with a clean, lint-free cloth to loosen dirt and debris. Wipe off with fresh, clean,
lint-free cloth or rinse with water and dry with a Turkish towel.
(3) To clean KYDEX 510, dust it with a soft cloth or chamois and wipe the surface
gently. Use soap and lukewarm water to remove light dirt. After washing dirt and
rinsing, be sure to dry the surface by blotting with a damp cloth or chamois. If a
cleaner must be used to remove heavier dirt or grease Joy and Ivory detergents
were found to be the most effective cleaners to remove this type of dirt (10% or less
concentration).
(4) It is possible that normal liquid cleaners or soap and water will not remove ground
in dirt or grease. Stains such as iodine can be safely removed with Isopropyl
Alcohol (45%). The higher concentration commercial grades of Isopropyl Alcohol
will remove the stain, but will dull the film surface. To return the gloss, wax with
Simoniz wax.
(5) Light surface scratches and abrasions on KYDEX 510 can be removed by waxing
with Simoniz. Deeper scratches can be removed by lightly buffing surface with a
fine grade of rubbing compound. After application of the wax, polish the surface
lightly with a clean cotton flannel or jersey cloth. After polishing, wipe area gently
with a damp cloth to ground any electrostatic charges that can attract dust particles.
(1) Remove any kind of soil, grease, and oil from powder-coated surfaces by
scrubbing with Spray White E (Kelite Chemical Corp.).
(2) Buff powder-coated surfaces with dry, lint-free cloth to remove residue after
cleaning.
H. IFE Equipment.
(1) IFE equipment is to be cleaned and cared for in accordance with the CMM
provided by the IFE supplier.
Metal B B A B
Plastics: polycarbonate, C A C C
polysulfone
Rubber: silicone A A A B
Notes:
(1) A = Recommended; B = Allowed; C = Prohibited
(2) Lacquer thinners used for cleaning purposes must have vapor pressures not
greater than 45 mmHg [6 kPa] at 25°C [77°F].
INSPECTION/CHECK
1. General
NOTE: Establish requirements of any service bulletins applicable to this equipment. During
check, determine which service bulletins, if any, are to be incorporated.
A. Refer to Table 5001 to visually examine components of the seat assembly for damage
and wear.
B. Refer to REPAIR section to repair minor damage. If the damage is major or beyond
simple repair, replace the part.
2. Inspection/Check
NOTE: Conduct checks under a bright light. Use a 5X to 7X power magnifying glass to
detect surface flaws.
A. Visually check that all parts are clean and free of cracks, corrosion, deterioration, and
obvious signs of damage.
B. Check security of all clamps and straps attaching leads and all other parts not removed
during disassembly.
C. Visually check all threaded parts for crossed or damaged threads. Reject part if thread
damage exceeds 50% of one thread.
NOTE: If damage to any one thread is 50% or less, note defect and assign part for
repair.
D. Check sewn seams for fraying or separation and fabric for fraying, scuffing and rips.
E. Check attaching bolts, nuts, screws and pins for tightness and floor attaching fittings for
wear or deformation.
G. Check structural parts including clips, brackets and machined parts for damage, cracks
and sharp nicks.
NOTE: Burrs are defined as material raised above the normal surface, which if not
removed can prevent full and correct mating of parts and sealing surfaces.
Where nicks or scratches allow bare metal to show through a protective finish,
note defect and assign part for repair. Dents or other damage must not impair
finish or functional operation of any part.
H. Check paint and finishes for chipping and worn marks, and note condition of bonding on
parts and assemblies.
I. Check data plate and placards for legibility and tight attachment.
J. Check food table top shroud for nicks, cracks, stains or burns.
NOTE: Slight wear of the webbing is permitted however, excessive web wear that has
progressed to cut or worn edges must be replaced. Refer to following criteria
to make this determination.
(1) A limited amount of “frayed” webbing will retain sufficient strength necessary to
meet the mandatory strength. Frayed webbing is defined as broken filaments from
either the warp (longitudinal) yarns or the filler (transverse) yarns. The number of
broken filaments should not be sufficient to obscure the identity of any yarn when
viewed from a distance of about 8.0 inches [20.3 cm].
(2) Any web that is cut or torn deeper than 0.10 inches [0.25 cm] on the edge.
(3) The amount of fray should be limited to an amount that is less than 10% of the width
of the webbing and not to exceed 8.0 inches [20.3 cm] in length.
(4) Webbing with more than 15 broken yarns in locations other than the edge.
(5) Webbing that is frayed or distorted sufficiently to cause incorrect operation of any
part of the restraint system.
L. Check cushions for wear and damage to fireblock and dress cover. Repair if there are
rips, gaps or loose seams. Cushions should be replaced at two year intervals to
guarantee maximum comfort.
3. Check Procedures
4. Maintenance Records
Check Procedures
Table 5001
Procedure for
Check Corrective Action
Inspection
Visual Check all parts for cleanliness. Refer to Cleaning section to clean parts.
Visual Check all metal parts for nicks, cuts, Repair minor nicks and scratches.
scoring, gouges, distortion, corrosion, or Replace damaged parts.
other damage which could impair
operation.
Visual Check recline functionality. Adjust per CMM (Refer to Fits and
Clearances Adjustment Procedure).
Visual Check all seat belts for cut or worn edges, Replace.
damaged stitching, broken fabric threads,
excessive chafe marks, excessive wear/
fusing. (Refer to paragraph 2.K for inspec-
tion criteria).
Visual Check functionality and leveling on back- Adjust per CMM (Refer to Fits and
mounted and IAT food table assemblies. Clearances Adjustment Procedure) or
Replace.
Visual Check all video arms for correct friction. Adjust per CMM (Refer to Fits and
Clearances Adjustment Procedure) or
Replace.
Visual Check all food trays in seat backs and IAT Replace.
for cracks and delamination.
Check Procedures
Table 5001
Procedure for
Check Corrective Action
Inspection
Visual Check spreaders and legs for looseness, Repair looseness. If cracked or damaged,
cracks or other damage. tell manufacturer of damages for replace-
ment action.
* The check procedures listed in Table 5001 are Safran Seats USA LLC recommendations and can be
performed according to the airline’s maintenance schedule program.
REPAIR
1. General
A. Repair of the seat assemblies is generally limited to those repairs that can be effected
by standard shop practices. Major structural repairs are to be prevented since the
safety-integrity of the seat can be compromised by incorrect disassembly and assembly
of major structural components.
2. Repair Procedures
NOTE: Refer to Table 6002 for approved materials used for bonding.
Abrasive cloth, 320 grit or finer Federal Specification P-C-451 Commercially available
A. Metal Surfaces.
(1) Polish out minor nicks and scratches on steel surfaces with crocus cloth. Polish out
minor nicks and scratches on aluminum parts with 600 to 800 grit aluminum oxide
abrasive cloth. Every effort shall be made to polish out nicks and scratches without
removing protective surfaces. Clean sanded areas as directed in paragraph 2.A,
CLEANING.
(3) With aluminum alloy parts without cladding, remove scratches or edge burrs using
a burnishing tool.
(4) 320 grit or finer abrasive cloth with oil, soft wiping materials and/or polishes shall
be used for blending repaired areas. Remove oil by solvent wiping or remove polish
with water or solvent, depending on type.
(6) Apply one drop of solution to the deepest part of scratch for three minutes
maximum. The presence of a dark gray or black product of reaction indicates that
the scratch has penetrated through the cladding to the basic material. If the
reaction product is white or faintly gray, some part of the cladding is still intact.
Rinse test area thoroughly with water and dry, using tissues, etc.
(7) When repairs are necessary, apply masking tape around scratch to confine area
affected to 0.25 inch [0.64 cm] or less in width.
(8) Apply chromate conversion coating Grade B to repaired area. Anodizing of clad
alloys can result in areas of difference color wherever the cladding has been
removed.
(9) Damaged anodized layers can be satisfactorily repaired from the standpoint of
corrosion resistance by applying a chromate conversion coating.
(10) For decorative plated parts, minor scratches, stains, or other defects shall be
removed by light buffing, if it is possible to do so while maintaining necessary
plating thickness. Parts not repairable by light buffing should be replaced.
(1) The plastic shrouds are Kydex 510 material. A characteristic texture is also
impressed on the appearance surface. These parts can be distorted by reheating
to 325.0°F to 390.0°F [162.7°C to 198.8°C].
(2) “Like-new” repair of plastic shrouds is not possible, because it will be necessary to
refinish the repaired areas with paint which has different wear characteristics than
the original shroud material. In addition, the surface texture will be changed in the
repaired area and restoration is difficult or even impossible to achieve.
(3) Shrouds which are broken into two or more pieces should be discarded unless a
fixture is devised as an external mold so that part shape will be retained during
repair reinforcement procedures outlined below.
(4) Remove shroud from substructure using care not to cause damage to or deform
the parts. If shroud is bonded to substructure, a hot air gun can be used to make
the adhesive bond line soft. Use care not to exceed 150.0°F [65.5°C] shroud
temperature and not to deform the shroud while hot. Remove adhesive with
Isopropyl Alcohol (</=45%) or Aliphatic Naphtha.
(5) Clean shroud surfaces using a warm detergent solution. Refer to Cleaning for
recommended cleaning procedures.
(6) Where necessary, reinforce inside surface of shroud in damaged area as follows:
(a) Roughen an area at least 1.0 inch [2.5 cm] larger than damaged area with 80
grit abrasive cloth.
(b) Wipe bond area with Isopropyl Alcohol using clean, oil-free wipe.
(c) Layer bond area with HH-66 Vinyl Cement or VC-87 (Table 6001) adhesive.
(e) Layer glass cloth with epoxy and remove entrapped air bubbles with a roller
or squeegee.
(f) Continue laminating layers of glass cloth and epoxy resin until necessary
thickness is attained. Limit the reinforcement to that thickness which will
permit reinstallation of reinforced shroud on its substructure. The necessary
number of glass cloth reinforcements can be determined as follows:
(g) Cure epoxy resin reinforcements for 24 hours at room temperature, 75.0°F
[23.8°C] or above. Cure can be accelerated by increasing temperature to
120.0°F [48.8°C] (max) which will cure resin in approximately four hours.
(a) Remove any excess epoxy from reinforcing operation by sanding smooth and
level.
(b) Clean repaired surface with Isopropyl Alcohol. Refer to CLEANING, Table
4002 for acceptable cleaning solvents.
(c) Fill any surface irregularities with catalyzed polyester resin filler. Catalyze only
the amount which will be immediately used since the material will begin to
harden within five minutes. An automotive body repair surfacing putty can be
used as an alternate fill material.
(d) Level fill with spatula or putty knife before filler hardens and restore texture by
stippling with a stiff-bristled brush. Texture match is achieved through trial and
error.
(e) After filler has fully hardened (10 to 15 minutes), sand area lightly to blend
repair into adjacent areas.
(8) Paint shroud using standard procedures with color matching touch-up paint. Cure
painted layer as necessary.
(9) Install shroud on substructure using a contact adhesive in areas where originally
adhered as follows:
(b) Allow solvents to escape from adhesive before closing assembly. Assembly is
ready to close when adhesive is almost dry with a slight tack remaining.
C G
T
L R
Y Typical Uses,
A A
P Product Cured Applications,
S D
E Designation Description Color Name and Address Remarks
S E
Epoxy Adhesives
I 1 A Hi-Temp 2214 Resin & Alum 3M One part, general
Hardener 3M Center purpose 250.0°F
St. Paul, MN [121.1°C] cure
I 2 A DP-100FR Resin & Cream 3M Fast dry epoxy,
Hardener 3M Center bond non-metallic
St. Paul, MN substrates,
potting, and
encapsulating
materials (food
tray table plastic
to foam), 4-8
minute work life
I 2 A DP-100 Plus Resin & Clear 3M Fast setting, high
Clear Hardener 3M Center sheer strength,
St. Paul, MN good seal
performance
properties, 4
minute work life
I 2 A DP-420 Resin & Off 3M High sheer and
Hardener White 3M Center peel (not for
St. Paul, MN bonding
aluminum to
Kydex) 20 minute
work life
I 2 A DP-805 Resin & Light 3M Bonds all plastics,
Hardener Yellow 3M Center 4 minute work life
St. Paul, MN
I 2 A DP-810 Resin & Tan 3M Bonds all plastics,
Hardener 3M Center 8-10 minute work
St. Paul, MN life
I 2 A EY 7016 A/B Resin (A) Cream Epoxies and Urethanes High density, fire
Hardener (B) Fort Worth, TX retardant
compound used
for hard potting
inserts into
honeycomb
panels
C G
T
L R
Y Typical Uses,
A A
P Product Cured Applications,
S D
E Designation Description Color Name and Address Remarks
S E
C G
T
L R
Y Typical Uses,
A A
P Product Cured Applications,
S D
E Designation Description Color Name and Address Remarks
S E
Cyanoacrylate Adhesives
X 1 A Aron Alpha 1 part liquid Clear McDonald & Co. Fast set,
II Glendale, CA general purpose
X 2 A MR-3000 1 part liquid/ Clear Pacer Technology Bonding grommet
II accelerator Rancho Cucamonga, to metallic
CA substrate, fills
gaps to 0.015
inch [0.038 cm]
Urethanes
X 2 B Uralane Resin A Beige Huntsman Advanced General purpose
I 5774A Hardener C Materials paste
5774C 5121 San Fernando Rd
W. Los Angeles, CA
C. Bonding.
(1) Decals which have been removed are not repairable. To replace with a new decal,
dampen a clean, lint-free cloth in alcohol. Clean mating surfaces of dirt, grit and old
adhesive. Replace with new decal using adhesive #468 (3M). On decals too thin to
use additional adhesive, use the preapplied adhesive.
(2) To remove grommets, pads and panels cemented to structure, apply Toluene to
edges of adhesive to make adhesive soft, then pry the part free from structure.
Before installing new grommets, pads, or panels to structure, sand surface to
remove all traces of scale, dirt, oxides, oils and old adhesive, then wipe with a clean
cloth dampened in Aliphatic Naphtha. To cement grommets, pads and panels,
apply a layer of adhesive to both surfaces with a clean, lint-free cloth which is
slightly dampened with Toluene. Immediately press both surfaces together and
allow to air-dry for 24 hours.
(3) To bond metal assemblies, clean surfaces with Acetone. To bond plastic
assemblies, clean surface with Aliphatic Naphtha. Spread a thin, even layer on one
of the parts to be bonded with a brush or spray. Allow adhesive to dry for 20 to 30
minutes. Press parts tightly together, using weights or clamps, as necessary. To
accelerate drying and curing time, subject assembly to heat at 150.0°F [65.5°C] for
one hour.
D. Rivets.
(1) Permissible limitations on dimension of rivet holes, where rivets were drilled out on
disassembly, are controlled by standard shop-practice use of replacement rivets
that are too large.
NOTE: The minimum pitch and edge distances for rivets are determined by the
original design. Closely monitor during repair.
E. Welding.
(1) To replace damaged spot-welded or tack-welded parts, cut away spot or tack in the
damaged part by spot-facing.
F. Fireblocking Covers.
(1) There are two procedures for accomplishing cover repair: sewing or bonding.
Sewing is the preferred procedure.
(a) Sew Repair - Sew patch in place with A-A-55195, Size T-50 Aramid thread per
Federal Standard 751, Type 301, seven to nine stitches per 1.0 inch [2.5 cm].
(b) Bond Repair - With adhesive, bond patch in place with 1.0 inch [2.5 cm]
minimum overlap. Tack patch with A-A-55195, Size T-50 Aramid thread,
minimum 0.5 inch [1.3 cm] spacing.
NOTE: These repairs can be used on cushions up to three (3) years old
(One year after the current two (2) year warranty expires).
Repair area can not be larger than 1.0 inch by 1.0 inch [2.5 cm by 2.5
cm] to make sure of 1.0 inch [2.5 cm] fireblocking overlap.
Two (2) patches per cushion maximum can be used. If more than two
(2) patches are necessary, the cushion must be replaced.
G. Lubrication.
(1) Lubrication reduces wear and friction between moving parts to make sure of correct
function and extended service life. Lubricants also provide for ease of assembly of
interference fit parts, such as bushings, pins, etc.
(a) Super Lube 41150 is the qualified lubricant to be applied to two piece sliding
food tables.
(c) If it is necessary to clean the area where the lubricant is to be applied, wipe
down the area with solvent cleaning procedures (See Table 4002). Apply
grease to one or both surfaces, as necessary, before assembling parts,
especially those involving an interference or press fit.
(1) Midwest Aero Support, Inc is an approved repair facility for composite seat parts
manufactured by Safran Seats USA LLC:
ASSEMBLY
1. General
A. During assembly, always use new low-cost items, such as cotter pins, screws, washers,
nuts, grommets, tie-straps, etc., when possible to prevent future maintenance
requirements due to failure of these items. Before initiating assembly procedures,
inspect all parts for wear and/or damage which could result in failure of the seat
assembly or any of its component assemblies.
B. Refer to Figure 7001 for a typical installation of the seat recline control buttons. The
items shown are furnished with the cable/control assembly and can vary slightly
depending upon particular part usage and manufacture; however the installation
procedure shown is generally representative.
NOTE: Make sure that all bottom cushions are installed correctly. Cushions must be
held at an angle with the aft section placed under the back cushion assembly,
then gently lower and push forward end of bottom cushion down into place
(bottomed on front tube assembly).
EXISTING HOLE
WASHER
Adhesive HH-66 Vinyl Cement R-H Products Co. Inc. Bonding of flexible vinyls,
VC-87 Acton, MA foam, leather
Foam Adhesive Simalfa 308FR Alfa Adhesives Bonding of fireblocking
N. Haledon, NJ cover to cushion
Epoxy W135 A/B Epoxies & Urethanes, Inc Filling of table shells
2406 Ludelle voids
Fort Worth, Texas
Grommet (cut to MS21266-1N Any approved source Protects IFE and recline
length) WA5489-100-100 control cables
2. Assembly Procedures
(1) Install swivel link assembly (5 thru 5B) and attach using bolt (10, 10A), washers
(15) and nut (20). Install spacer (25 thru 25C).
(2) Install seat belt link (35, 35A) and attach using screw (40), washer (45), spacer (50)
and nut (55).
(3) Assemble swivel link assembly (150, 150A) by attaching screw (160), nut (175),
washer (165) and spacer (170) to swivel link (155).
(4) Install bolts (110 thru 110D), washers (115, 115A) and nuts (120).
(5) Install offset spreader (190 thru 190E, 195, 195A) by attaching bolts (200), washers
(205) and nuts (210). Attach spacers (215).
(6) 874616-417, -418 only: Install adapter (220, 220A) by attaching bolts (225) and
washers (230).
(1) Install swivel link assembly (5) and attach using bolt (10, 10A), washers (15) and
nut (20). Install spacer (25).
(2) Install seat belt link (35) and attach using screw (40), washer (45), spacer (50) and
nut (55).
(3) 873286-401, -402, 882196-411, -412 only: Install lockout mechanism (105) and
attach using cap screw (110). Install spring (115).
(4) Assemble swivel link assembly (180) by attaching screw (190), nut (205), washer
(195) and spacer (200).
(5) Install bolts (140 thru 140B), washers (145, 145A) and nuts (150).
(6) Install upper canted spreader (215 thru 215C) by attaching bolts (220), washers
(225) and nuts (230).
(1) Install base assembly (5, 5A) and attach using bolts (10 thru 15A), washers (20 thru
20B) and nut (25 thru 25B). Install bushings (30, 30A).
(2) Install strut assembly (95, 95A) and attach using bolt (100, 100A), washers (105,
105A) and nut (110, 110A). Install bushing (115, 115A).
(3) Install bolts (120 thru 120D), washers (125) and nuts (130) onto leg (140 thru
140C).
(1) Install lit pocket spring (5 thru 5B) and attach using screws (10), washers (15 thru
20A) and nuts (25).
(2) Install quadrant arm assemblies (35 thru 35D) and attach using bolt (40), washers
(45, 50), spacer (55, 55A), bushing (60) and nut (65).
(3) Assemble quadrant arm assembly by installing screw (75, 75A), bushing (90),
washers (80) and nut (85) used to attach plate (70, 70A).
(1) Install escutcheon assembly (5) and attach using screws (10).
(2) Install armcap assembly (15, 15A) and attach using screws (20). Install bracket
(p/o armcap) (25) by attaching screws (30).
(1) Install knuckle assembly (5, 5A) and attach using screw (10) and washers (15).
Install spacer (20) by attaching retaining ring (30) and lock screw (25).
(3) Install paddle arm assembly (45, 45A) and attach using screw (50). Install slide (55,
55A) onto paddle by attaching screws (60).
(4) Install hinge assembly (70) and attach using screws (75).
(5) Install tracks (80) and attach using screws (85, 85A).
(1) Install table onto seat assembly and attach using screws (Ref. 75, IPL Fig. 1 and
1A, and 70, IPL Fig. 2).
(2) Install setscrews (25, 25A) onto tray arm (20, 20A).
H. Model Z100 Tourist Class Standard Double Seat Assembly. (IPL Figure 2A)
(1) Refer to ASSEMBLY, paragraph 2.D. for back assembly (495 thru 495E), 2.C. for
leg assembly (520 thru 520C), 2.B. for side spreader assembly (525 thru 525C,
545, 545A) and 2.A. for center spreader assembly (550 thru 550B).
(2) Following assembly of upholstered items and dress covers, carefully “dress” seat
to make sure of correct fit. Refer to FITS AND CLEARANCES section for final
adjustments.
I. Model Z100 Tourist Class Standard Triple Seat Assembly. (IPL Figure 2)
(1) Refer to ASSEMBLY, paragraph 2.G. for instructions pertaining to aft-mounted food
table assembly (65 thru 65L), 2.D. for back assembly (495 thru 495AG), 2.C. for leg
assembly (520), 2.B. for side spreader assembly (525 thru 525E, 545 thru 545C)
and 2.A. for center spreader assembly (550 thru 550H).
(2) Following assembly of upholstered items and dress covers, carefully “dress” seat
to make sure of correct fit. Refer to FITS AND CLEARANCES section for final
adjustments.
J. Model Z100 Tourist Class Front Row Double Seat Assembly. (IPL Figure 1A)
(1) Refer to ASSEMBLY, paragraph 2.G. for instructions pertaining to aft-mounted food
table assembly (70), 2.F. for in-arm food table assembly (210, 210A), 2.E. for IAT
armrest assembly (220 thru 220C), 2.D. for back assembly (450 thru 450C), 2.C.
for leg assembly (470, 470A), 2.B. for side spreader assembly (480, 480A, 485,
485A) and 2.A. for center spreader assembly (490).
(2) Following assembly of upholstered items and dress covers, carefully “dress” seat
to make sure of correct fit. Refer to FITS AND CLEARANCES section for final
adjustments.
K. Model Z100 Tourist Class Front Row Triple Seat Assembly. (IPL Figure 1)
(1) Refer to ASSEMBLY, paragraph 2.G. for instructions pertaining to aft-mounted food
table assembly (70 thru 70B), 2.F. for in-arm food table assembly (210 thru 210C),
2.E. for IAT armrest assembly (220 thru 220J), 2.D. for back assembly (470 thru
470C), 2.C. for leg assembly (490), 2.B. for side spreader assembly (495, 495A,
515 thru 515C) and 2.A. for center spreader assembly (520 thru 520F).
(2) Following assembly of upholstered items and dress covers, carefully “dress” seat
to make sure of correct fit. Refer to FITS AND CLEARANCES section for final
adjustments.
Fits, clearances and adjustment procedures for the seat assembly are given in this section.
2. Adjustment Procedures
The setscrews located at each arm of the table assembly are provided for
adjustment of the top surface of the table assembly with respect to the aircraft floor.
To attain the necessary height of 25.9 inches [65.8 cm], adjust the cap screw
accordingly.
(2) Surface Leveling of Table Assembly
Leveling the surface of the table can be done by adjusting two setscrews located
at both arms of the table. Alternating the adjustment of the top and bottom
setscrews will allow the necessary leveling of the surface.
3.5°
NOTE: It is acceptable to remove tie straps where the cable is short and causes
a tight bend radius, making the button depression tighter than 9.5 lb [4.3
kg] of force when pressed.
NOTE: Cable attachments can be used or changed to a single tie strap to aid or
restrict recline cable movement on baseframe tube during lifting or
lowering seat pan for inspection or service of seat assemblies.
NOTE: If recline cables and IFE cables run side by side from armrest assemblies,
the cables must be attached separately.
(3) Adjust the recline cable length using the threaded spacer on the recline cable
actuator. Remove any extra slack from the cable and tighten the jam nut to the
threaded spacer.
NOTE: Make sure that the recline lock is installed and attached through the
recline lock pin or pivot and attached with a clip assembly correctly before
initiating adjustment procedures.
(4) Attach the recline cable actuator to the recline lock by sliding clip through channel
on recline lock end.Tighten the 3/8 inch adjustment nut so there is no play in bottom
part of recline actuator. Tighten the 7/16 inch jam nut with fingers or wrench.
Recline the seat back.
(5) With seat still in recline position, loosen the 7/16 inch jam nut and begin to loosen
the 3/8 inch adjustment nut until the recline lock cylinder releases.
(6) Loosen the 3/8 inch adjustment nut five (5) turns. One “turn” is as far as you can
turn the wrench without resetting it. Tighten the 7/16 inch jam nut with a wrench.
Set back to upright position.
(7) With armrest fully raised, recline seat to test that recline button releases the back
approximately halfway through pushing the button.
(8) If the recline releases when button is barely pressed, the seat is at risk for auto-
recline.
(a) Loosen the 7/16 inch jam nut, then loosen the 3/8 inch adjustment nut one
turn.
(c) Do step 5 above again to make sure of button release point. Continue to
loosen the 3/8 inch adjustment nut one turn until recline release point is at
halfway.
(9) If the recline releases when the button is pressed in almost fully, the seat is at risk
of recline failure.
(a) Loosen the 7/16 inch jam nut, then tighten the 3/8 inch adjustment nut one
turn.
(c) Do step 5 above again to make sure of button release point. Continue to
tighten the 3/8 inch adjustment nut one turn until recline release point is at
halfway.
RECLINE
RECLINE CONTROL
ACTUATOR BUTTON
RECLINE LOCK
THREADED SPACER
(1) To set upright dimensions, return all backs to their most upright position. Adjust the
two (2) jam-nuts on either side of the recline lock pin or pivot, using two (2)
wrenches. Hold the forward nut stationary while tightening the aft nut in a clockwise
motion until both jam nuts are tight. Dimensions should be in accordance with seat
dimensions shown in DESCRIPTION AND OPERATION section.
(2) Adjusting the jam nuts towards the rear of the seat assembly will cause the back
assembly to be more upright, while adjusting the jam nuts towards the front of the
seat assembly will cause the back assembly to be more reclined.
(3) Once the upright dimension is set, cycle the back from the upright position to the
reclined position several times, and check the dimension to make sure it has not
moved. If the dimension has changed, adjust and tighten the jam nuts again until
no changes occur.
(4) To set recline dimensions, move all backs to their most reclined position. Measure
the recline distance. Dimensions should be in accordance with seat dimensions
shown in DESCRIPTION AND OPERATION section.
(5) If the dimensions need to be adjusted, adjust the recline lock jam nuts until
dimensions are within tolerances. Cycle the back from the upright position to the
recline position several times and check the dimension to make sure it does not
change. If the dimensions have changed, adjust and tighten the jam nuts again
until no changes occur.
NOTE: Some recline cables have two places for adjustments, one at the recline
lock, and another located above the attachment point on the spreader
assembly. It is possible that both places can need adjustments.
(6) If any pax of the seat assembly must be adjusted for recline after setting the upright
dimension, check the upright dimension again to make sure it does not change. If
the dimensions change, adjust and tighten the jam nuts again until no changes
occur.
(7) After setting all upright and recline dimensions, move all pax to recline position.
Make sure that all pax remain reclined and do not return to upright position without
depressing the recline button. If any pax returns to the upright position without
depressing the recline button, check the recline cable for pinching or tight bend
radius. Refer to section 2.A for recline cable adjustments.
(1) Use the applicable Aircraft installation drawing to find the correct location for the
front studs of the seat being installed.
(2) Loosen anti-rattle fitting so that the seat will slide in the tracks.
(3) Install seat so that the front studs are in the correct position.
NOTE: Insert fittings into the adjacent cutouts and slide the seat 0.5 inch [1.3 cm]
to the correct position.
(4) Using a screwdriver or any other applicable tool, engage the shear plunger of the
aft track fitting.
(5) Torque forward and aft fitting screws to 45 ± 10 in/lb [5 ± 1 Nꞏm]. Make sure that
the shear pin has entered the track and that no red paint is visible above the track.
TOP OF TRACK
STUDS
STUDS
(35A, IPL 7)(35A, IPL 7)
ANTI-RATTLE
PIN ASSEMBLY SHEAR PIN
(50, IPL 7) ASSEMBLY
(40, IPL 7)
TOP OF TRACK
(1) The in-arm food table should fold flat across the seat, touching the tray tab onto the
module. Adjust screw (40, IPL Fig. 4) on knuckle assembly (5, 5A, IPL Fig. 4)
(2) Adjust the table by using an Allen wrench to turn the screw lock (25, IPL Fig. 4) in
the necessary direction to achieve correct leveling so that the table lies flat across
the seat.
SCREW
LOCK
(25, IPL FIG. 4)
SPACER
(20, IPL FIG. 4)
(REF 25, SCREW
IPL FIG. 4) KNUCKLE AY (40, IPL FIG. 4)
RING (5, IPL FIG. 4)
(30, IPL FIG. 4)
(1) Cable tie straps can be no more than 8.0 inches [20.3 cm] apart. SSUSA places
them between 2.0 and 6.0 inches [5.1 and 15.2 cm] apart.
• Large cable tie straps are used for attaching to structural components.
• Small cable tie straps are used for attaching to all other components.
(2) Cable tie straps must not be overtightened. If using a strap gun, set the tension on
the gun before use so that the strap will be snug but not overtightened.
(4) Trim excess tongue as close to head as possible with a maximum 0.05 inch [0.13
cm] excess allowed using strap cutting tool.
(5) The tie head must be located so it will not scuff, cause damage to, injure or be in
view of the passenger.
3. Tolerances
A. Wiring.
(a) Seat to seat and video coaxial cables can be no less than six (6) times the
diameter of the cable.
(b) All other cables and harnesses can vary between three (3) to six (6) times the
diameter of the cable.
(a) IFE and power cables are not allowed to run together, however, they can
cross.
NOTE: System requirement separation can vary for IFE and power cables
depending on the vendor. Follow IFE/Electrical drawings for
compliance.
A crease in the material caused by bending the material sharply. These “marks”
have been otherwise known as “finger nail marks” and “eyebrows”.
(2) Ding. (See Figure 8005)
A mark or an indentation of small dimension, typically less than 0.01 inch [0.03 cm]
in diameter, and no deeper than 10% of the material thickness.
(3) Scratch. (See Figure 8005)
A measurable defect is defined as a defect such as a scratch or dent, etc. that can
be measured with the use of any precision measuring device.
(6) Superficial Scratch.
(2) Play.
• Arms - ± 0.125 inch [± 0.318 cm] side to side at the end of the armrest
• Handicap Arms (latched down) - 0.15 inch [0.38 cm] vertical movement,
0.125 inch [0.318 cm] side to side at the end of the armrest
• Backs - 0.9 inch [2.3 cm] total forward and aft movement at the top of the
back
• Armrest Escutcheons - ± 0.05 inch [± 0.13 cm] side to side and force to aft
• Armcaps - ± 0.05 inch [± 0.13 cm] side to side and force to aft
(3) Noise.
(a) Sound made by the normal operation of the seat which exceeds 65 decibels
when measured at a distance of 3 feet [1 m] is considered unacceptable.
(b) If the seat has multiple features that pivot (armrest, backs, food tables,
footrests), the operation of these features is to be free of squeaks when
measured at a distance of 3 feet [1 m].
A. General.
(1) Minimum edge distance of bolt and screw holes shall be one and one half bolt
diameters from the edge and two bolt diameters from the center of the hole plus
0.03 inch [0.08 cm] unless a smaller distance is noted.
(2) Drilled and reamed holes for bolts and screws shall meet the finish and tolerance
requirements.
(3) Areas that are prepared for fasteners after final protective finish has been applied
shall be refinished or touched up in accordance with applicable finish specification.
Painted layers shall be touched up in accordance with drawing call-outs for
adjacent areas. (Refer to REPAIR)
(4) Lubrication, other than that applied by the manufacturer shall not be used on
fasteners unless specifically allowed for component installations as specified by
this manual.
(5) The number and type of washers under the bolt heads shall be as specified on the
engineering drawing or CMM. If unspecified, the maximum number shall be two.
(6) Where bolt head orientation is unspecified, the installation shall be with head up,
where practical and in conformance with appearance and safety requirements, to
minimize chance the bolt will fall out in case nut is loosened.
(8) Certified torque wrenches shall be used for torquing of fastener to a value
specified.
(9) Installed nuts, bolts, screws, washers and cotter pins shall be free of burrs and
sharp edges which can cause damage or injury to personnel.
(11) When necessary to protect the surface finish of adjacent structure from damage
when tightening, one standard washer shall be used, either under the nut or bolt
head, whichever is being turned.
(12) Standard spacer washers can be added under the nut to adjust grip length. A
maximum of two washers meeting the requirements can be used.
(13) When washers are necessary and not specified, the material shall be similar to that
of the material against which the washer will bear to prevent galvanic (dissimilar
metal) corrosion. Some examples are: aluminum against aluminum, cadmium
plated steel against cadmium plated steel (or aluminum) and stainless steel against
stainless steel.
(14) Length of bolts and screws shall be such that the nut shall not bottom out on the
last thread of the bolt shank, and bolt protrusion through nut shall be at least one
and one half threads.
(15) For stacked sheets and/or fittings with threaded points of engagement which have
a combined thickness of less than 0.094 inch [0.239 cm], all threads on stacked
sheets and/or fittings shall be fully engaged.
(16) For stacked sheets and/or fittings with threaded points of engagement which have
a combined thickness of greater than 0.094 inch [0.239 cm], all threads on the
stacked sheets and/or fittings need not be fully engaged and the bolt tip can be sub
flush by a maximum of two bolt threads (including the thread run out).
NOTE: Must maintain a minimum thread engagement of two full threads. In the
case of a threaded receptacle with a locking device (locking helicoil), the
thread engagement must be sufficient to fully engage the locking device.
NOTE: Torque limits listed in Table 8001 are for clean, non-lubricated bolts and
nuts and to nuts lubricated by the manufacturer.
Bolt Strength 125,000 PSI Min. 125,000 PSI Min. 165,000 PSI Min. 62,000 PSI Min. 220,000 PSI Min.
[861,845 kPa] [861,845 kPa] [1,137,635 kPa] [427,475 kPa] [1,516,847 kPa]
1-3/8-12 7000-9000
[791-1017]
1-1/2-12 10000-12000
[1130-1356]
1Nuts are to be torqued at the mid point of range listed with a tolerance of ±10%
2
Maximum torque allowed for alignment of nut and hole
B. Cotter Pins.
(2) There are two procedures for cottering castellated nuts, Figure 8006 shows the
preferred procedure and the optional procedure which can be used where injury to
personnel, clothing, or interference with equipment are considerations. In either
case, the pin shall be installed with the head parallel to the slot in the nut.
PREFERRED OPTIONAL
PROCEDURE PROCEDURE
C. Gap Tolerances.
(1) Gaps between fastener heads, nuts or washers and surfaces being fastened shall
be subject to the following controls:
(a) A no-go gauge can be used for gap inspection purposes, however shall not
include the shank of the bolt or screw when inspected.
(b) The gap shall not exceed 0.004 inch [0.010 cm] between the bolt head and
mating surfaces (smooth, dimpled, countersunk or otherwise) provided no
more than 40% of the head periphery has a gap.
(c) The gap shall not exceed requirements specified in Table 8002 for nuts and
mating surfaces provided no more than 40% of the periphery has a gap.
(2) Gaps which allow the insertion of 0.004 inch [0.010 cm] or thinner feeler gauge
between the protruding or countersunk head and bearing surface shall be
acceptable unless more than 40% of head circumference has such a gap. Wider
gaps are not acceptable, regardless of extent.
D. Self-Locking Nuts.
(1) Self locking nuts can not be reused unless they meet the breakaway torque
requirements listed in Table 8003.
A. The following tools and equipment are necessary to perform the procedures specified
in this maintenance manual. There are no other special fixtures, tools, test, or support
equipment necessary to perform maintenance procedures.
B. The Sharp Edge Tester Model SET-50 will be utilized to provide an objective means for
judging the sharpness of an edge on the seat assembly. (See Figure 9001)
(1) Slide the Tape Cap all the way on to the pressure head of the Sharp Edge Tester
with the black center guide line and the part of the red plastic cap that does not
have a cover facing up.
(2) Position the pressure head that has a tape cover on the edge of the item to be
checked for sharpness. Holding the clam shell base in your hand, press down on
the head that has a tape cover until the arm and the tool form a straight line.
(3) Move the pressure head 2.0 inches [5.1 cm] along the edge and then back again
to the starting point. Then withdraw the tool from the edge. The total distance of
engagement between the edge and the head that has a tape cover is therefore 4.0
inches [10.2 cm].
(4) Examine the tape cap to determine whether or not penetration has occurred
through the two sensing layers. If penetration has occurred, the black indicating
tape will be visible through the resulting cut. The application of the Sharp Edge
Tester to an edge with acceptable sharpness will not result in the cutting through
the two outer layers of the sensing tape.
C. The recommended consumables for the seat assembly are given in Table 9002.
NOTE: Equivalent items can be used.The recommended consumables for the seat
assembly are given in Table 9002.
Consumables
Table 9002 (Sheet 1 of 4)
Consumables
Table 9002 (Sheet 2 of 4)
Consumables
Table 9002 (Sheet 3 of 4)
Consumables
Table 9002 (Sheet 4 of 4)
This section lists, describes, and illustrates all component assemblies, subassemblies, and
parts necessary for maintenance of the seat assembly.
2. Scope of Information
A. General
Each assembly is listed and immediately followed by a listing of its detail parts. The
listing is indentured to show the relationship between each part and its next higher
assembly. Item numbers in the parts list correspond to the item numbers of the
accompanying illustration (figure).
(1) When the part number is known: Find the part number in the numerical index and
note the figure and item number. Find the item number in the applicable parts list
and illustration to get the necessary information. The search function on the
interactive (electronic) version of this manual can also be used to locate the known
part number.
(2) When the part number is not known: Review the illustrations to identify the part by
physical appearance and location. Refer to the accompanying parts list to get the
part number, nomenclature, effectivity, and quantity.
(3) The effectivity code shows the part usage relative to the next higher assembly.
When the EFFECTIVITY CODE column is blank, the part usage applies to all next-
higher-assembly versions unless otherwise specified in the NOMENCLATURE
column.
The Equipment Designator Index (if applicable) is an aid to find the parts in the Detail Parts
List by equipment designator. The equipment designator, the part number, the figure number,
and the item number are given for each entry.
The equipment designator are sorted one character at a time, from left to right. The correct
sequence is (1) dash, (2) letters A through Z, and (3) numerals 0 through 9.
4. Numerical Index
The Numerical Index is an aid to find parts in the Detail Parts List by part number. The figure
number, the item number, and the total quantity necessary are given for each entry.
The part numbers are sorted one character at a time, from left to right. The correct sequence
is (1) dash, (2) letters A through Z, and (3) numerals 0 through 9.
The Detail Parts List is arranged in general sequence of disassembly. The parts are
illustrated in an exploded-view illustration and listed in the related parts list.
(1) The first number at the top of each FIG. ITEM column is the figure number of the
exploded-view illustration. The number given opposite each part number is the item
number assigned to the part in the illustration.
(2) A dash (-) in front of an item number means the part is not illustrated.
(3) Alpha-variants A through Z (except I and O) are assigned to item numbers when
necessary to identify added parts, alternate parts, and parts modified by service
bulletins.
This column gives the part number of the manufacturer for each part, as modified to
meet the requirements of ATA 200/2000. The modifications can include:
(1) Removal of blank spaces and special characters, with the possible exception of
dashes. Dashes are permitted only between numeric characters.
(2) Insertion of a reference part number compatible with ATA 200/2000 if the part
number is longer than 15 characters. In these cases, the full part number is given
in the NOMENCLATURE column.
C. INDENTure Column
The indenture column is used to show the relationship of one part to another as found
on the original engineering drawings. A typical indenture relationship is as follows:
D. NOMENCLATURE Column
(1) This column contains descriptive nomenclature for each part, and can also give the
CAGE code of the manufacturer (if the part is not made by Safran Seats USA LLC),
the part number (if it is longer than 15 digits or modified to ATA 200/2000), any
service bulletin that affect the part, and any obsolete part numbers. The column
also provides figure references for NHA and details, and additional descriptive
information as necessary.
(3) The terms defined below are used when applicable to indicate the
interchangeability of parts.
This column contains effectivity codes (A, B, etc.) to indicate the alternate models or
configurations of the end items to which the parts apply. This column is left blank when
the parts apply to all models or configurations in the parts list. In some cases, the aircraft
effectivity codes are listed (i.e. 001999). This code identifies an individual aircraft. The
code 001 is the 1st aircraft and 999 identifies the last aircraft.
The quantity shown in this column is the units necessary for one next higher assembly
(NHA). The abbreviation RF (reference) means the end item or assembly is shown fully
assembled in the figure referenced in the NOMENCLATURE column.
The CAGE codes for the manufacturers of the parts, special tools, test equipment, and
materials referenced in the manual are given below. The five digit code is preceded by the
letter V. The codes are taken from Cataloging Handbook H4/H8. No code in the
NOMENCLATURE column means the part is made by Safran Seats USA LLC.
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
AN316-6R 1 430 2
1A 410 2
2 455 2
2A 455 2
AN565B8H4 7 75 1
F832-1 5 50 4
LC029C01S 1 176 1
2 185 1
2A 185 1
LC042D2MW 8 115 1
LC042F01S 6 145 1
MS16556-5 6 150 1
MS16562-64 8 100 1
MS21042-3 1 335 1
1 410 2
1 510 2
2 345 1
2 420 2
2 540 2
2A 345 1
2A 540 2
6 25 4
6 85 2
9 210 2
MS21042-4 1 170 1
1 455 1
1A 170 1
1A 435 1
2 175 1
2 480 1
2 494A 1
2A 175 1
2A 480 1
6 65 1
8 20 1
8 55 1
8 150 2
8 205 1
8 230 2
9 20 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
MS21042-4 9 55 1
9 120 2
9 175 1
MS21042-5 7 130 2
MS21075L08N 6 160 2
MS21209C0610 3 30B 1
MS21209C0615 3 30A 1
MS21209F1-20 3 30 1
MS21209F4-10 7 135 1
MS21209F5-15 7 70 3
MS25281F3 2 215 6
2A 215A 4
6 30 2
MS25281F5 1 206 4
2 215A 6
2 215B 6
2A 215 4
MS3367-2-9 1 200A 5
1A 200A 3
2 230B 5
2 230C 4
2 265 AR
2A 230A 3
2A 265 AR
MS3367-5-9 1 200 5
1A 200 3
2 230 5
2 230A 4
2A 230 3
MS35333-42 1 435 2
1A 415 2
2 460 2
2A 460 2
NAS1081-06A3 3 25 1
NAS1081-06A4 3 25A 1
NAS1081-08A3 8 165 1
9 135 2
9 135A 1
NAS1081-3A8L 8 70 3
8 70A 1
8 70B 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
9 70 1
9 70A 3
9 70B 1
NAS1081-3A10L 8 70C 2
9 70C 2
NAS1149D0316J 1 65 2
1A 65 2
5 2 250 2
2A 250 2
NAS1149D0332J 1A 330 1
2A 340 1
6 20 4
6 20A 2
9 205 4
9 230 3
NAS1149D0432J 2 470A 2
2 493 2
6 50 1
NAS1149D0532J 7 155 6
NAS1149D0863J 8 170 1
9 140 2
NAS1149F0332P 1 405 4
2 340 2
2 415 4
2A 340A 2
6 80 4
NAS1149F0416P 1 445 2
1A 425 2
2 470 2
2 512 4
2A 470 4
7 20B 2
8 145 4
8 225 4
9 115A 4
NAS1149F0432P 1 165 2
1 230 1
1 240 1
1A 165 2
1A 230 1
1A 240 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 170 2
2A 170 2
7 20 2
7 105A 2
8 15 2
8 145A 4
9 15 2
9 115 4
NAS1149F0516P 7 125 4
NAS1149F0532P 7 105 2
NAS1149F0563P 7 20A 2
NAS1169-10 6 15 4
6 15A 2
NAS1191-04P3B 4 50 2
NAS1191E08P4L 4 40 1
NAS1351-3-10P 1 120 1
1A 120 1
2 115 1
2A 115 1
NAS1351-3-12 1 110A 1
1A 110 1
2 105 1
2A 105 1
NAS1351-3-12P 1 110 1
8 110 1
NAS1351-3-26P 1A 75 2
2 70 2
NAS1351-3-28 1 75 2
NAS1351-3-8 1 105A 1
1A 105 1
2 100 1
2A 100 1
NAS1351-3-8P 1 105 1
8 85 1
NAS1352-06-6 4 75 2
NAS1352-08-6P 1 160 3
1 185 4
1 207 1
1A 160 3
1A 185 4
2 160 3
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 220 1
2A 160 3
2A 220 1
NAS1515H3L 1 505 2
2 535 2
2A 535 2
NAS1515H4L 1 345 2
1 450 2
1A 430 2
2 355 2
2 475 2
2 493A 2
2A 355 1
2A 475 1
NAS42DD6A22N 2 210 2
NAS43DD4-10 8 25 1
9 25 2
9 25A 1
NAS43HT4-14 8 50 1
8 200 1
9 50 1
9 170 1
NAS43HT4-26 6 55 1
NAS514P1032-4 4 85A 1
NAS514P1032-5 4 60 2
4 85 2
NAS514P440-4P 1 160A 2
2 165 2
2A 165 2
NAS514P832-10 5 10 2
NAS514P832-4 5 20 4
5 80 4
NAS514P832-4P 5 30 4
NAS517-3-12 6 10 4
NAS517-3-17 4 10 1
NAS517-3-2 2 530 1
2A 530 1
6 75 2
NAS517-3-3 2 530A 1
2A 530A 1
6 75A 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
NAS517-3-5 1 305 D
1 305A D
1 500 1
NAS517-3-6 1 500A 1
NAS517-3-8 1 305B D
NAS517-3-8 1 500B 1
NAS561P5-10 1 465 1
1A 445 1
2 490 1
2A 490 1
NAS561P6-16 5 100 2
NAS602-12P 1 195 1
1A 195 1
NAS602-24P 2 205 2
NAS603-14P 1A 60 2
2 245 2
2A 245 2
NAS603-16P 1 60 2
NAS620-8L 2 225 1
2A 225 1
NAS6203-10 9 225 3
NAS6203-16 1 400A 1
2 410A 1
NAS6203-26 9 200 2
NAS6203-34 1 400 1
2 410 1
NAS6204-10 8 10A 1
NAS6204-11 1 440 1
1A 420 1
2 465 1
2A 465 1
8 220 2
NAS6204-13 2 492A 1
9 10 1
NAS6204-15 2 465A 1
NAS6204-16 2 492 1
NAS6204-17 1 225 1
1A 225 1
NAS6204-18 1 155 1
1A 155 1
2 155 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2A 155 1
NAS6204-23 6 40 1
NAS6204-29 9 10A 1
NAS6204-7 8 10 1
NAS6204-8 1 340 2
2 350 2
2A 350 1
NAS6204-9 1 235 1
1A 235 1
NAS6205-18 7 100 1
NAS6205-22 7 150 3
NAS620C416L 6 140 2
NAS623-2-16 6 130 2
NAS623-3-1 1A 325 1
NAS623-3-14 2A 335 1
NAS623-3-44 1 325 1
2 335 1
2A 335A 1
NAS623-4-5 8 40 1
8 190 1
9 40 1
9 160 1
NAS6604-1 1 475 2
1A 455 2
2 500 2
2A 500 2
NAS6604-11 8 140 2
9 110D 2
NAS6604-12 7 15A 1
8 140A 1
9 110 1
NAS6604-13 8 140B 1
9 110A 1
9 110C 1
NAS6604-14 9 110B 1
NAS6604-15 7 100A 1
NAS6604-17 2 511 2
NAS6604-19 7 10 1
NAS6605-12 7 15 1
NAS6605-16 7 120A 1
7 120C 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
NAS6605-17 7 120B 1
NAS6605-18 7 120 1
NAS6605-22 7 120D 1
NAS75-4-006 2 481 1
2 494 1
6 90 1
NAS77-11-038 8 80 2
9 80 2
NAS77-11-100 6 100 2
NAS77-4-085 6 60 1
WA5085-22110402 6 175 19
WA5085-22310302 6 165 2
WA5085-22310402 3 65 4
WA5085-52120408 6 110 D
WA5085-52320402 1 385 10
2 395 10
2A 390 4
WA5086-12110403 2 430 4
WA5088-52120402 6 110A 4
WA5088-52120408 6 110B 3
WA5088-52120603 1A 400B 3
1A 400C 2
2 440 6
2 440A 5
2 440B 5
2 440C 2
2 440D 4
2 440E 2
2A 440 4
2A 440A 6
2A 440B 5
2A 440C 3
WA5088-52120604 1A 400 4
1A 400A 2
2 445 1
2 445A 2
2 445B 2
2 445C 3
2 445D 6
2 445E 5
2 445F 5
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 445G 2
2A 445 3
2A 445A 1
2A 445B 2
2A 445C 4
WA5088-52120606 1 420 10
WA5088-52320402 2A 400 2
WA5088-52320403 1A 365 4
2A 375 4
WA5499-128-100 2 431 4
WA5499-128-101 6 115 3
6 180 6
WA9652-100-102 1 45 AR
1A 45 AR
2 40 AR
2A 40 AR
WA9656-109-100 6 185F AR
WA9658-1000-101 6 185A AR
WA9658-1500-100 6 185B AR
WA9658-2000-102 1 245 AR
1A 245 AR
2 255 AR
2A 255 AR
6 185 AR
WA9658-500-105 6 185C AR
WA9659-1000-112 6 185E AR
WA9659-2000-112 5 110 AR
6 185D AR
WA9659-500-106 5 110A AR
WA9659-750-111 5 110B AR
116558-003 7 160 3
2143-1-011-8031 1 25 2
1 25C 1
1A 25 1
1 25A 1
1 25B 2
2194-1-051-8031 1 25D 2
1A 25A 1
2 25 3
2A 25 2
42NKE048 2 513 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
7 25 1
7 25B 1
7 110A 1
42NKE054 7 25A 1
7 110 1
7 165 3
421M 5 90 1
5103-18 4 30 1
5610-22-20 4 15 2
5710-58-30 8 45 1
8 195 1
9 45 1
9 165 1
5710-62-60 1 330 2
1 480 1
1A 460 1
2 505 2
2A 505 2
5710-84-40 6 45 1
115018-011 4 25 1
115121-001 1 350 2
2 360 2
2A 360 2
842730-401 4 70 2
854794-001 4 55 2
854794-007 4 55A 2
857126-025 2 260 3
2 260A 1
2 260B 2
2 260C 4
2A 260 2
2A 260A 1
857455-009 4 90A 2
857455-015 4 90 2
858805-739B 1 210 3
1 210B 1
4 1 RF
858805-740B 1 210A 3
1 210C 1
4 1A RF
858805-747A 1A 210 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
4 1B RF
858805-748A 1A 210A 2
4 1C RF
858806-401AW 4 100 1
858806-402BA 4 100A 1
858807-415C 4 95 1
858807-416C 4 95A 1
858807-427A 4 95B 1
858807-428A 4 95C 1
858809-401P 4 45 1
858809-402P 4 45A 1
858810-001P 4 65 1
858810-002P 4 65A 1
859526-001 4 80 2
859749-003 5 45 1
860683-001 9 25C 1
860683-003 9 215 2
860683-011 9 25B 1
861615-001 1 35 NP
1A 35 NP
2 30 NP
2A 30 NP
861615-003 1 35A NP
1A 35A NP
2 30A NP
2A 30A NP
861824-001 8 80A 2
862080-403AD 4 5 1
862080-404AD 4 5A 1
862081-003AD 4 35 1
862081-004AD 4 35A 1
864743-403AA 1 30 6
864743-403BB 1 30A RF
865052-001 4 20 1
866642-007A 9 220 1
866642-008A 9 220A 1
867649-003 1 40 NP
1A 40 NP
2 35 NP
2A 35 NP
867664-007 2 510 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
869022-001A 8 215B 1
869022-002A 8 215C 1
869022-005A 8 215 1
869022-006A 8 215A 1
869223-005 8 245A 1
869223-006 8 245 1
869223-019 8 245B 1
869223-020 8 245C 1
869223-023 9 180 1
869223-025 9 180A 1
869223-027 8 245D 1
869223-029 9 180B 1
869224-001 1 460 2
1A 440 2
2 485 2
2 485B 3
2 485D 4
2A 485 2
2A 485B 1
869224-003 1 460A 1
2 485A 1
2A 485A 1
869224-005 2 485C 1
869254-451 2 435K 1
869254-452 2 435L 1
869254-465 2 435F 1
869254-466 2 435G 1
869254-467 2 435D 1
869254-468 2 435E 1
869254-469 2 435M 1
869254-470 2 435N 1
869254-471 2 435P 1
869254-472 2 435Q 1
869254-473 2 435H 1
869254-474 2 435J 1
869254-481 1 415B 1
869254-482 1 415C 1
869254-483 1 415D 1
2 435R 1
2A 435F 1
869254-484 1 415E 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 435S 1
2A 435G 1
869254-485 2 435B 1
869254-486 2 435C 1
869254-487 1 415 1
2 435 1
2A 435B 1
869254-488 1 415A 1
2 435A 1
2A 435C 1
869254-489 2 435T 1
869254-490 2 435U 1
869254-491 1A 395B 1
2 435V 1
2A 435D 1
869254-492 1A 395C 1
2 435W 1
2A 435E 1
869254-493 2 435X 1
869254-494 2 435Y 1
869254-495 2 435Z 1
869254-496 2 435AA 1
869254-497 2 435AB 1
869254-498 2 435AC 1
869254-703 1A 395 1
2A 435 1
869254-704 2 395A 1
2A 435A 1
869317-401 2 491 3
869348-437A 1 70 3
2 65 3
2 65A 2
3 1 RF
869348-439A 2 65B 1
2 65C 3
3 1A RF
869348-445A 2 65G 1
2 65H 3
2 65K 1
3 1D RF
869348-447A 1A 70A 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
3 1C RF
869348-449A 1 70A 3
1 70B 3
2 65D 3
2 65E 3
2 65F 2
2 65J 2
2 65L 2
3 1B RF
869366-433A 3 50 1
869366-435A 3 50A 1
869366-441A 3 50D 1
869366-443A 3 50C 1
869366-445A 3 50B 1
869374-019A 3 80A 1
869374-023A 3 80 1
869374-029A 3 80D 1
869374-031A 3 80C 1
869374-033A 3 80B 1
869375-031A 3 85 1
869375-037A 3 85A 1
869375-043A 3 85D 1
869375-045A 3 85C 1
869375-047A 3 85B 1
869496-445 6 35B 1
869496-446 6 35C 1
869496-447 6 35 1
869496-448 6 35A 1
869496-469 6 35D 2
869563-407A 5 15 1
869563-407H 5 15A 1
869566-003C 5 75 1
869566-005A 5 60 1
869567-403A 5 35 1
869570-005 5 40 1
869659-401A 7 95A 1
869660-005 7 115 1
869661-001 7 30A 1
869661-003 7 115A 1
869664-405 7 45 1
869665-401 7 40 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
869666-403 7 50 1
869673-001 7 35 5
7 35A 4
869674-001 7 55 1
869685-401 9 75 1
869685-403 8 75 1
869686-401 8 5 1
9 5 2
9 5A 1
869686-405 9 5B 1
869687-401 8 180 1
9 150 2
9 150A 1
869688-401 8 175 1
9 145 2
869690-003 8 35 1
9 35 1
869690-005 9 35A 1
869691-003 8 30 1
9 30 1
869691-005 9 30A 1
869692-001 8 185 1
9 155 1
869696-011 8 105 1
869697-001 9 65A 1
869697-003 8 65A 1
869697-005 8 65 1
9 65B 1
869697-007 9 65 1
869699-401 8 60 1
9 60 2
869904-023 6 95 1
869904-024 6 95A 1
869904-027 6 95B 1
869905-005 6 70 1
869905-021 6 70A 1
872632-001A 1A 350 2
872747-105 6 170 1
872747-107 6 170A 1
872747-111 6 170B 1
872807-403 1 425 3
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
1A 405 2
2 450 3
2A 450 3
872809-001 1A 390 1
2A 405 1
872809-003 1 390 1
872809-003 2 400 1
2A 405A 1
872846-003 5 70 1
872849-003A 5 55 1
873000-003 8 95 1
873000-007 1 175 2
1A 175 2
2 180 2
2A 180 2
873218-009A 7 140C 1
873220-001A 7 95 1
873227-445A 1 515 1
8 1D RF
873227-446A 1 515A 1
8 1E RF
873227-457A 1A 485 1
8 1P RF
873227-458A 1A 485A 1
8 1Q RF
873228-443A 1 520 1
9 1 RF
873228-453A 1 520E 1
9 1L RF
873228-454A 1 520F 1
9 1M RF
873228-455A 1A 490 1
9 1N RF
873231-023A 9 185A 1
873231-031A 9 185B 1
873232-045A 8 235 1
9 185 1
873232-051A 8 235B 1
9 185C 1
873233-001A 8 210C 1
873233-002A 8 210B 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
873276-001 1 485 6
1A 465 4
2 515 6
2A 515 4
873286-401A 2 525B 1
8 1F RF
873286-402A 2 525C 1
8 1G RF
873555-479A 1A 320 1
2A 330 1
873555-480A 1A 320A 1
2A 330A 1
873556-007 1A 355 1
2A 365B 1
873556-008 1A 355A 1
2A 365A 1
873557-085 1A 370 1
2A 365 1
873558-005 1A 360 1
2A 370 1
873563-031B 2A 240B 1
1A 55A 1
873563-032B 1A 55 1
2A 240C 1
873563-033B 2A 240 1
2A 240A 1
873563-037C 1 55 1
2 240 1
2A 240D 1
873563-038C 1 55A 1
2 240A 1
2A 240E 1
873563-049A 2A 240F 1
873563-050A 2A 240G 1
873661-401 2 235A 1
2 235B D
2A 235A 1
873661-407 1 205 2
2 235 2
2 235C D
2A 235 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2A 235B 2
873661-411 1 205 3
1 205A 1
1A 205 2
874620-005A 7 140B 1
874621-003A 7 145 1
874622-003A 7 145A 1
874616-417A 1 520A 1
9 1A RF
874616-418A 1 520B 1
9 1B RF
874616-419A 1 520C 1
2 550A 1
2A 550A 1
9 1C RF
874616-420A 1 520D 1
2 550B 1
2A 550B 1
9 1D RF
874616-421A 2 550E 1
9 1G RF
874616-422A 2 550F 1
9 1H RF
874616-427A 2 550G 1
9 1J RF
874616-428A 2 550H 1
9 1K RF
874617-015A 9 190B 1
874617-016A 9 190C 1
874617-017A 9 190 1
874617-018A 9 190A 1
874617-023A 9 190D 1
874617-024A 9 190E 1
874618-013A 9 195 1
874618-014A 9 195A 1
874619-413A 1A 470 1
2A 520A 1
7 1B RF
874619-414A 1A 470A 1
2A 520B 1
7 1C RF
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
874699-413A 1A 475 1
2A 1C RF
7 520 1
874944-401A 7 5 1
874945-401A 7 60 1
874946-001A 7 65 1
874947-403A 7 5A 1
874948-403A 7 60A 1
874949-003A 7 65A 1
874950-003 7 30 1
874975-005 2 514 4
874989-001 6 5A 1
874989-015 6 5 1
874989-023 6 5B 1
875028-405A 5 5 1
875580-001 8 240 1
875587-013A 1 80 3
1A 80A 2
2 75 3
875587-015A 1 80A 3
1A 80A 2
2 75A 3
876416-007 1 215 1
1A 215 1
877124-403 2 516 3
877208-019 1 375 1
2 385 1
2A 395A 1
877208-021 1 365 1
2 375 1
877208-022 1 365A 1
2 375A 1
877208-025 1 360 1
2 370 1
2A 385 1
877208-027 2 375B 1
877208-028 2 375C 1
877208-031 2 375D 1
877208-032 2 375E 1
877208-033 1 365B 1
877208-034 1 365C 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
877208-035 2A 395 1
877282-001 1 355 1
2 365 1
877282-002 1 355A 1
2 365A 1
877468-029 1 130 1
1A 130 1
2 125 1
2A 125 1
877470-407 1 140 1
1A 140 1
2 135 1
2A 135 1
877848-415C 2 110 1
877848-416C 2 110A 1
877848-417C 1 115H 1
2 110F 2
2A 110 1
877848-418C 1 115J 1
2 110G 2
2A 110A 1
877848-419C 2 110H 2
877848-421D 1 115 1
2 110D 1
877848-422D 1 115A 1
2 110E 1
877848-423B 2 110B 1
877848-424C 2 110C 1
877848-435C 1 115F 1
877848-435C 2 110J 1
2 110Q 1
2A 110B 1
877848-436C 1 115G 1
2 110K 1
2 110R 1
2A 110C 1
877848-441C 1 115B 1
1 115D 1
1A 115 1
2 110N 1
2 110U 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2A 110D 1
877848-442C 1 115C 1
1 115E 1
1A 115A 1
2 110P 1
2 110V 1
2A 110E 1
877848-443C 2 110L 1
2 110S 1
877848-444C 2 110M 1
2 110T 1
877914-411B 5 105A 1
877914-412B 5 105 1
877914-413A 5 105C 1
877914-414A 5 105B 1
877916-411B 5 95 1
877916-412B 5 95A 1
877916-413A 5 95B 1
877916-414A 5 95C 1
877918-415B 1 220 1
1A 220 1
5 1 RF
877918-415E 1 220F 1
5 1D RF
877918-416B 1 220A 1
1A 220A 1
5 1A RF
877918-416E 1 220G 1
5 1E RF
877918-417A 1 220B 2
1 220D 1
1A 220B 1
5 1B RF
877918-417B 1 220H 2
5 1F RF
877918-418A 1 220C 2
1 220E 1
1 220C 1
5 1C RF
877918-418B 1 220J 2
5 1G RF
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
877919-001A 5 65 1
877919-001G 5 65A 1
877920-001 5 25 1
878280-013C 1 135B 1
2 130 1
2A 130B 1
878280-014C 1 135C 1
2 130A 1
2A 130C 1
878280-017C 2 130F 1
878280-019C 1 135D 1
2 130G 1
2A 130 1
878280-020C 1 135E 1
2 130H 1
2A 130A 1
878280-021D 1 135 1
1A 135 1
2 130D 1
2A 130D 1
878280-022D 1 135A 1
1A 135A 1
2 130E 1
2A 130E 1
878280-023B 2 130B 1
878280-024C 2 130C 1
878299-405B 2 520 2
878299-405B 2A 520C 2
7 1A RF
878300-003B 7 140 1
878301-405B 1 490 2
7 1 RF
878308-013 1 380 1
2 390 1
2A 380 1
878308-014 1 380A 1
2 390A 1
2A 380A 1
878309-047 1 370 1
2 380 1
878309-048 1 370A 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 380A 1
878309-049 2 380B 1
878309-050 2 380C 1
878309-051 2 380D 1
878309-052 2 380E 1
878309-053 2 380F 1
878309-054 2 380G 1
878309-057 2 380H 1
878309-058 2 380J 1
878309-059 1 370B 1
878309-060 1 370C 1
878309-061 2A 380B 1
878309-062 2A 380C 1
878313-443A 1 320 1
2 330 1
878313-444A 1 320A 1
2 330A 1
878313-445A 2 330B 1
878313-446A 2 330C 1
878313-447A 2 330D 1
878313-448A 2 330E 1
878313-449A 2 330F 1
878313-450A 2 330G 1
878313-451A 2 330H 1
878313-452A 2 330J 1
878313-453A 1 320B 1
878313-454A 1 320C 1
878313-455A 2A 330B 1
878313-456A 2A 330C 1
878318-005A 3 35 1
878318-006A 3 35A 1
878319-405A 3 20 1
878319-406A 3 20A 1
878321-407 3 60 1
878321-408 3 60A 1
878321-409 3 60B 1
878321-410 3 60C 1
878424-403D 1 100 1
1 100A 3
1A 100 1
2 95 4
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 95A 3
2A 95 3
878424-403F 1 100B 3
2 95B 4
2 95C 3
878572-441 2A 555 1
878572-442 2A 555A 1
878572-443 1A 500 1
878572-443 2A 560 1
878572-444 1A 500A 1
2A 560A 1
878572-455 1A 495 1
878572-456 1A 495A 1
879226-445 1 525 1
2A 555B 1
879226-446 1 525A 1
2 555C 1
879226-447 1 530 1
2A 560B 1
879226-448 1 530A 1
2A 560C 1
879226-457 1 525B 1
879226-458 1 525C 1
879226-459 1 530B 1
879226-460 1 530C 1
879226-461 1 525D 1
879226-462 1 525E 1
879290-005 2 425 1
879290-011 2 425A 1
879420-003B 1 190 1
1A 190 1
879420-004B 1 190A 1
1A 190A 1
879516-001B 2 200 1
879516-002B 2 200A 1
879523-405B 6 105A 1
879523-406B 6 105B 1
879523-407B 6 105 1
879523-409A 6 105C 1
879523-410A 6 105D 1
879933-401 2 190 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
879934-001 2 195 1
880155-001 1 395 1
2 405 1
880680-011 3 75 1
880680-017 3 75A 1
880680-019 3 75D 1
880680-021 3 75C 1
880680-023 3 75B 1
880681-407 3 55A 1
880681-411 3 55 1
880681-413 3 55D 1
880681-415 3 55C 1
880681-417 3 55B 1
880684-007 3 70A 1
880684-011 3 70 1
880684-013 3 70D 1
880684-015 3 70C 1
880684-017 3 70B 1
880786-001 6 55A 1
880791-401 1 177 1
2 140 1
2A 140 1
880793-401A 1 145 1
2 145 1
2A 145 1
880793-403A 1 145B 1
2 145A 1
2A 145A 1
880793-405 1 145A 1
880793-405 1A 145 1
2 145B 1
2A 145B 1
880795-001 1 150A 1
2 150 1
2A 150 1
880795-003 1 150B 1
2 150A 1
2A 150A 1
880795-005 1 150 1
1A 150 1
2 150B 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2A 150B 1
880971-401A 1 50 3
2 45 3
880971-403A 1 50A 3
2 45A 3
880971-405A 1 50B 3
1 50C 3
1A 50 2
2 45B 3
2 45C 3
2A 45 2
881194-415A 2 495E 2
2 495P 1
6 1 RF
881194-416A 2 495D 2
2 495Q 1
6 1A RF
881194-417A 1A 450A 1
1A 450B 1
6 1R RF
881194-418A 1A 450 1
1A 450C 1
6 1S RF
881194-419 2 495G 1
2 495R 2
2A 495A 1
2A 495B 1
6 1B RF
881194-420 2 495F 1
2 495S 2
2A 495 1
2A 495C 1
6 1C RF
881194-427A 1 470A 2
1 470B 1
2 495A 2
2 495K 1
6 1D RF
881194-428A 1 470 2
1 470C 1
2 495 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 495L 1
6 1E RF
881194-429A 2 495M 1
2 495Z 3
6 1F RF
881194-430A 2 495N 1
2 495AA 3
6 1G RF
881194-431A 2 495B 2
2 495AB 3
6 1H RF
881194-432A 2 495C 2
2 495AC 3
6 1J RF
881194-433 2 495J 2
2 495T 1
6 1K RF
881194-434 2 495H 2
2 495U 1
6 1L RF
881194-435 2 495AD 1
2 495AF 2
2A 495D 2
6 1T RF
881194-436 2 495AE 1
2 495AG 2
2A 495E 2
6 1U RF
881194-437A 2 495V 2
6 1M RF
881194-438A 2 495W 2
6 1N RF
881194-439A 2 495X 1
6 1P RF
881194-440A 2 495Y 1
6 1Q RF
881887-405A 1 180B 1
1A 180 1
881887-407A 1 180 1
881887-408A 1 180A 1
882089-001C 6 120 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882129-001A 7 140A 1
8 235A 1
882132-405A 1 515B 1
1A 480A 1
2 545 1
2A 525A 1
2A 545 1
8 1H RF
882132-406A 1 515C 1
1A 480 1
2 545A 1
2A 525 1
2A 545A 1
8 1J RF
882132-407A 2 545B 1
2A 525C 1
8 1M RF
882132-408A 2 545C 1
2A 525C 1
8 1N RF
882157-401 1 1 RF
882157-402 1 1A RF
882157-403 2 1 RF
882157-404 2 1A RF
882157-405 2 1B RF
882157-406 2 1C RF
882157-407 2 1D RF
882157-408 2 1E RF
882157-409 2 1F RF
882157-410 2 1G RF
882157-411 2 1H RF
882157-412 2 1J RF
882157-413 2 1K RF
882157-414 2 1L RF
882157-415 2 1M RF
882157-416 2 1N RF
882157-417 2 1P RF
882157-418 2 1Q RF
882157-419 2 1R RF
882157-420 2 1S RF
882157-421 1 1B RF
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882157-422 1 1C RF
882157-423 2 1T RF
882157-424 2 1U RF
882157-425 2 1V RF
882157-426 2 1W RF
882157-427 2 1X RF
882157-428 2 1Y RF
882157-429 2 1Z RF
882157-430 2 1AA RF
882157-431 2A 1 RF
882157-432 2A 1A RF
882157-433 2A 1B RF
882157-434 2A 1C RF
882157-435 2 1AB RF
882157-436 2 1AC RF
882157-437 2 1AD RF
882157-438 2 1AE RF
882157-439 2 1AF RF
882157-440 2 1AG RF
882157-441 1A 1 RF
882157-442 1A 1A RF
882157-443 1 1D RF
882157-444 1 1E RF
882157-445 2 1AH RF
882157-446 2 1AJ RF
882157-447 2 1AK RF
882157-448 2 1AL RF
882157-449 1 1F RF
882157-450 1 1G RF
882157-451 2 1AM RF
882157-452 2 1AN RF
882157-453 2 1AP RF
882157-454 2 1AQ RF
882157-455 2 1AR RF
882157-456 2 1AS RF
882157-457 2 1AT RF
882157-458 2 1AU RF
882176-401B 6 135 1
882194-403A 2 550 1
2 550C 2
2A 550 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
9 1E RF
882194-411A 2 550D 1
9 1F RF
882195-001A 8 210 1
882195-002A 8 210A 1
882196-405A 2 525 1
8 1B RF
882196-406A 2 525A 1
8 1C RF
882196-407A 1 495 1
8 1 RF
882196-408A 1 495A 1
8 1A RF
882196-411A 2 525D 1
8 1K RF
882196-412A 2 525E 1
8 1L RF
882245-417 2 555 1
882245-418 2 555A 1
882245-419 2 560 1
882245-420 2 560A 1
882245-421 2 555B 1
882245-422 2 555C 1
882245-423 2 560B 1
882245-424 2 560C 1
882245-425 2 555D 1
882245-426 2 555E 1
882245-427 2 560D 1
882245-428 2 560E 1
882245-429 2 555F 1
882245-430 2 555G 1
882245-431 2 560F 1
882245-432 2 560G 1
882245-433 2 555H 1
882245-434 2 555J 1
882245-435 2 560H 1
882245-436 2 560J 1
882248-001 6 190 1
882248-003 6 190B 1
882248-005 6 190A 1
882260-011 6 155 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882261-001 6 125 1
882261-003 6 125A 1
882261-004 6 125B 1
882263-401 1 2 1
882263-402 1 2A 1
882263-403 1 2B 1
882263-404 1 2C 1
882263-405 1A 2A 1
882263-406 1A 2B 1
882263-407 1 2F 1
882263-408 1 2G 1
882264-401 2 2 1
882264-402 2 2A 1
882264-403 2 2R 1
882264-404 2 2S 1
882264-405 1 2D 1
882264-406 1 2E 1
882264-407 2 2AH 1
882264-408 2 2AJ 1
882265-401 2 2B 1
882265-402 2 2C 1
882265-403 2 2T 1
882265-404 2 2U 1
882265-405 2 2Z 1
882265-406 2 2AA 1
882265-407 2 2AK 1
882265-408 2 2AL 1
882267-401 2 2D 1
882267-402 2 2E 1
882267-403 2 2V 1
882267-404 2 2W 1
882267-405 2 2AM 1
882267-406 2 2AN 1
882268-401 2 2F 1
882268-402 2 2G 1
882268-403 2 2X 1
882268-404 2 2Y 1
882268-405 2 2X 1
882268-406 2 2AP 1
882270-401 2 2AQ 1
882270-402 2 2J 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882270-403 2 2P 1
882270-404 2 2Q 1
882270-405 2 2AB 1
882270-406 2 2AC 1
882270-407 2 2AD 1
882270-408 2 2AE 1
882270-409 2 2AF 1
882270-410 2 2AG 1
882271-401 2 2K 1
882271-402 2 2L 1
882272-401 2 2M 1
882272-402 2 2N 1
882281-401 2 90B 1
2 90C 3
882281-403 1A 95 2
882281-405 1 95 3
2 90 3
2 90A 2
882427 1 5 RF
1A 5 RF
2 5 RF
2A 5 RF
882450-403 1A 10 2
882450-405 1 10B 1
2 10B 1
2 10C 3
882450-407 2 10D 3
2 10E 3
2 10F 2
2A 10 2
882450-409 1 10 3
1 10A 1
2 10G 1
882450-411 1 10C 1
2 10 3
2 10A 2
2 10H 2
2A 10A 2
882452-401A 2 85X 2
882452-401B 2 85Y RF
882452-407A 2 85V 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882452-407B 2 85W RF
882452-409A 2 85Z 2
882452-409B 2 85AA RF
882452-411A 2 85AB 2
882452-411B 2 85AC RF
882456-403 1A 20 1
882456-405 1 20A 1
2 20A 1
882456-407 2 20B 1
2A 20 1
882456-409 1 20 1
2 20C 1
882456-411 1 20B 1
2 20 1
2A 20A 1
882468-401A 1 315 1
882468-402A 1 315A 1
882468-403A 1 315B 1
882468-404A 1 315C 1
882468-405A 1 315D 1
882468-406A 1 315E 1
882468-407A 1A 315 1
882468-408A 1A 315A 1
882469-401A 2 325 1
882469-402A 2 325A 1
882469-403A 2 325B 1
882469-404A 2 325C 1
882469-405A 2 325D 1
882469-406A 2 325E 1
882469-407A 2 325F 1
882469-408A 2 325G 1
882469-409A 2 325R 1
882469-410A 2 325S 1
882469-411A 2 325T 1
882469-412A 2 325U 1
882469-413A 2 325V 1
882469-414A 2 325W 1
882469-415A 2 325X 1
882469-416A 2 325Y 1
882469-417A 2 325Z 1
882469-418A 2 325AA 1
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882469-419A 2 325AD 1
882469-420A 2 325AE 1
882470-401A 2 325H 1
882470-402A 2 325J 1
882470-403A 2 325K 1
882470-404A 2 325L 1
882470-405A 2 325AB 1
882470-406A 2 325AC 1
882471-401A 2 325M 1
882471-402A 2 325N 1
882471-403A 2 325P 1
882471-404A 2 325Q 1
882545-401A 2 85D 1
2 85F 3
2 85X 1
882545-401B 2 85E RF
2 85G RF
2 85Y RF
882545-403A 1A 90 2
2 85H 3
882545-403B 1A 90A RF
2 85J RF
882545-405A 2 85P 3
2A 85 2
882545-405B 2 85Q RF
2A 85A RF
882545-407A 1 90 3
2 85 3
2 85B 2
2 85V 2
882545-407B 1 90A RF
2 85A RF
2 85C RF
2 85W RF
882545-409A 2 85M 1
2 85R 2
882545-409B 2 85N RF
2 85S RF
882545-411A 2 85K 2
2 85T 1
2A 85B 2
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882545-411B 2 85L RF
2 85U RF
2A 85C RF
882546-403A 1A 15 1
882546-403B 1A 15A 1
882546-405A 1 15B 1
2 15B 1
882546-405B 1 15C RF
2 15C RF
882546-407A 2 15D 1
2A 15 1
882546-407B 2 15E RF
2A 15A RF
882546-409A 1 15 1
2 15F 1
882546-409B 1 15A RF
2 15G RF
882546-411A 1 15D 1
2 15 1
2A 15B 1
882546-411B 1 15E RF
2 15A RF
2A 15C RF
882547-405A 1 85 3
1 85H 2
2 80 3
2 80B 2
2 80H 2
882547-405B 1 85A RF
1 85J RF
2 80A RF
2 80C RF
2 80J RF
882547-407A 1A 85 1
882547-407B 1A 85A RF
882547-411A 1 85B 3
1 85D 3
1 85F 1
882547-411B 1 85C RF
1 85E RF
1 85G RF
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
882547-415A 2 80P 1
2 80T 1
882547-415B 2 80Q RF
2 80U RF
882547-416A 2 80R 1
2 80V 1
882547-416B 2 80S RF
2 80W RF
882547-417A 2 80D 1
2 80K 1
882547-417B 2 80E RF
2 80L RF
882547-418A 2 80F 1
2 80M 1
882547-418B 2 80G RF
2 80N RF
882547-419A 2 80X 2
882547-421A 1 85K 3
882547-423A 2 80Y 1
882547-424A 2 80Z 1
882547-425A 2 80AA 1
882547-426A 2 80AB 1
882665-001 1 125 1
1A 125 1
2 120 1
2A 120 1
882794-001 6 195 2
882794-003 6 195A 2
882794-005 6 195B 2
882946-401A 2A 325 1
882946-402A 2A 325A 1
882946-403A 2A 325B 1
882946-404A 2A 325C 1
882947-401 2A 2 1
882947-402 2A 2A 1
882947-403 2A 2B 1
882947-404 2A 2C 1
885580 1 5A RF
2 5A RF
886181-001 1 179 2
1 179A 4
NUMERICAL INDEX
AIRLINE
IPL FIG TOTAL
PART NUMBER PART
FIGURE ITEM REQ
NUMBER
2 189 6
2 189A 4
2A 189 2
886181-003 1 179B 2
1A 179 2
2 189B 2
2A 189A 4
90 B
95
25
215 D 80A
80
210
25
E
210
25A
E
70
210
F
20 15
50
10
515
530 520
415
35
520A
415D
C
495
415B
320
510
505
505
500
470
75
485
480
475
465 440
445
520
C 450
455
(REF)
460 425
430
435
430
D INBD
240
235
190
515
(REF)
220 205
195
230
225
E CTR
240
235 180
185
(4 PL)
220B 205
520
(REF)
230
225
F OUTBD
100 115
120
125
105
495
(REF)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–1 882157-401 0 SEAT AY, MODEL Z100 T/C, LH A RF
F/R TPL, IAT, 4” RECL
–1A 882157-402 0 SEAT AY, MODEL Z100 T/C, RH B RF
F/R TPL, IAT, 4” RECL
–1B 882157-421 0 SEAT AY, MODEL Z100 T/C, LH C RF
F/R TPL, IAT, 4” RECL
–1C 882157-422 0 SEAT AY, MODEL Z100 T/C, RH D RF
F/R TPL, IAT, 4” RECL
–1D 882157-443 0 SEAT AY, MODEL Z100 T/C, LH E RF
STD TPL, OUTBD PAX IAT, 4”
RECL
–1E 882157-444 0 SEAT AY, MODEL Z100 T/C, RH F RF
STD TPL, OUTBD PAX IAT, 4”
RECL
–1F 882157-449 0 SEAT AY, MODEL Z100 T/C, LH G RF
F/R TPL, IAT, 4” RECL
–1G 882157-450 0 SEAT AY, MODEL Z100 T/C, RH H RF
F/R TPL, IAT, 4” RECL
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
15 882546-409A 3 DRESS COVER AY, BTM 1
(HEARTSTONE) (U/O 882450-
409)
–15A 882546-409B 3 DRESS COVER AY, BTM RF
(SOUTHERN BELLE) (U/O
882450-409)
–15B 882546-405A 3 DRESS COVER AY, BTM 1
(HEARTSTONE) (U/O 882450-
405)
–15C 882546-405B 3 DRESS COVER AY, BTM RF
(SOUTHERN BELLE) (U/O
882450-405)
–15D 882546-411A 3 DRESS COVER AY, BTM 1
(HEARTSTONE) (U/O 882450-
411)
–15E 882546-411B 3 DRESS COVER AY, BTM RF
(SOUTHERN BELLE) (U/O
882450-411)
20 882456-409 3 CUSHION AY, FBLK (U/O 882450- 1
409)
–20A 882456-405 3 CUSHION AY, FBLK (U/O 882450- 1
405)
–20B 882456-411 3 CUSHION AY, FBLK (U/O 882450- 1
411)
25 2143-1-011-8031 2 SEAT BELT AY, “Y,” LH (V35FB9) A,C,G 2
25A 2143-1-021-8031 2 SEAT BELT AY, “Y,” RH (V35FB9) A,C,F,G 1
–25B 2143-1-021-8031 2 SEAT BELT AY, “Y,” RH (V35FB9) B,D,H 2
–25C 2143-1-011-8031 2 SEAT BELT AY, “Y,” LH (V35FB9) B,D,E,H 1
–25D 2194-1-051-8031 2 SEAT BELT AY (V35FB9) E,F 2
–30 864743-403AA 2 COVER AY, SEAT BELT (SILVER A,B,C,D 6
GHOST) G,H
–30A 864743-403BB 2 COVER AY, SEAT BELT A,B,C,D RF
(SOUTHERN BELLE)
35 861615-001 2 NAMEPLATE (TSO) NP
–35A 861615-003 2 NAMEPLATE (MOD) NP
–40 867649-003 2 PLACARD, RFID NP
–45 WA9652-100-102 2 TAPE, ADHESIVE BACKED, 2.0 AR
INCH (2.5 INCH PIECE)
50 880971-401A 2 POUCH AY, LIFE VEST (REPLD A,B 3
BY ITEM 50B)
–50A 880971-403A 2 POUCH AY, LIFE VEST (REPLD C,D 3
BY ITEM 50B)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–50B 880971-405A 2 POUCH AY, LIFE VEST (REPLS A,B,C,D 3
ITEM 50 & 50A)
–50C 880971-405A 2 POUCH AY, LIFE VEST E,F,G,H 3
–55 873563-037C 2 BUMPER E 1
–55A 873563-038C 2 BUMPER F 1
ATTACHING PARTS
–60 NAS603-16P 2 SCREW 2
–65 NAS1149D0316J 2 WASHER 2
---*---
70 869348-437A 2 FOOD TABLE AY (AFT-MOUNTED) A,B 3
(SEE IPL FIG. 3 FOR DETS)
(REPLD BY ITEM 70B) (PRE SB
883034-25-4743)
–70A 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) C,D,E,F 3
(SEE IPL FIG. 3 FOR DETS) G,H
–70B 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) A,B 3
(SEE IPL FIG. 3 FOR DETS)
(REPLS ITEM 70) (POST SB
883034-25-4743)
ATTACHING PARTS
75 NAS1351-3-28 2 SCREW 2
---*---
80 875587-013A 2 PLACARD, SAFETY (BND) 3
(FASTEN SEAT BELT WHILE
SEATED)
80A 875587-015A 2 PLACARD, SAFETY (BND) (LIFE 3
VEST UNDER YOUR SEAT)
–85 882547-405A 2 DRESS COVER AY, LIT POCKET A,B 3
(HEARTSTONE) (REPLD BY
ITEM 85D)
–85A 882547-405B 2 DRESS COVER AY, LIT POCKET A,B RF
(SOUTHERN BELLE) (REPLD BY
ITEM 85E)
–85B 882547-411A 2 DRESS COVER AY, LIT POCKET C,D 3
(HEARTSTONE)
–85C 882547-411B 2 DRESS COVER AY, LIT POCKET C,D RF
(SOUTHERN BELLE)
–85D 882547-411A 2 DRESS COVER AY, LIT POCKET A,B 3
(HEARTSTONE) (REPLS ITEM
85)
–85E 882547-411B 2 DRESS COVER AY, LIT POCKET A,B RF
(SOUTHERN BELLE) (REPLS
ITEM 85A)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–85F 882547-411A 2 DRESS COVER AY, LIT POCKET E,F 1
(HEARTSTONE) (OUTBD)
–85G 882547-411B 2 DRESS COVER AY, LIT POCKET E,F RF
(SOUTHERN BELLE) (OUTBD)
–85H 882547-405A 2 DRESS COVER AY, LIT POCKET E,F 2
(HEARTSTONE) (INBD & CTR)
–85J 882547-405B 2 DRESS COVER AY, LIT POCKET E,F RF
(SOUTHERN BELLE) (INBD &
CTR)
–85K 882547-421A 2 DRESS COVER AY, LIT POCKET G,H 3
(HEARTSTONE)
90 882545-407A 2 CUSHION AY, BACK W/DRESS 3
(HEARTSTONE)
–90A 882545-407B 2 CUSHION AY, BACK W/DRESS RF
(SOUTHERN BELLE)
95 882281-405 2 CUSHION AY, BACK FILLER 3
100 878424-403D 2 ARMCAP AY (OUTBD) A,B,C,D 1
–100A 878424-403D 2 ARMCAP AY E,F 3
–100B 878424-403F 2 ARMCAP AY G,H 3
ATTACHING PARTS
105 NAS1351-3-8P 2 SCREW (FWD) A,B,C,D 1
G,H
–105A NAS1351-3-8 2 SCREW (FWD) E,F 1
–110 NAS1351-3-12P 2 SCREW (AFT) A,B,C,D 1
G,H
–110A NAS1351-3-12 2 SCREW (AFT) E,F 1
---*---
115 877848-421D 2 ARMREST AY (OUTBD) (REPLD A 1
BY ITEM 115D)
–115A 877848-422D 2 ARMREST AY (OUTBD) (REPLD B 1
BY ITEM 115E)
–115B 877848-441C 2 ARMREST AY (OUTBD) C,E,G 1
–115C 877848-442C 2 ARMREST AY (OUTBD) D,F,H 1
–115D 877848-441C 2 ARMREST AY (OUTBD) (REPLS A 1
ITEM 115)
–115E 877848-442C 2 ARMREST AY (OUTBD) (REPLS B 1
ITEM 115A)
–115F 877848-435C 2 ARMREST AY (INBD) E 1
–115G 877848-436C 2 ARMREST AY (INBD) F 1
–115H 877848-417C 2 ARMREST AY (INBD-CTR) E 1
–115J 877848-418C 2 ARMREST AY (INBD-CTR) F 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
ATTACHING PARTS
120 NAS1351-3-10P 2 SCREW 1
125 882665-001 2 WASHER 1
---*---
–130 877468-029 3 ARMREST CORE 1
–135 878280-021D 3 ARMREST BODY 1
(U/O 877848-421, -441)
–135A 878280-022D 3 ARMREST BODY 1
(U/O 877848-422, -442)
–135B 878280-013C 3 ARMREST BODY 1
(U/O 877848-435)
–135C 878280-014C 3 ARMREST BODY 1
(U/O 877848-436)
–135D 878280-019C 3 ARMREST BODY 1
(U/O 877848-417)
–135E 878280-020C 3 ARMREST BODY 1
(U/O 877848-418)
–140 877470-407 3 ARMREST AY 1
–145 880793-401A 3 PIVOT BLOCK AY 1
(U/O 877848-421, -422)
–145A 880793-405 3 PIVOT BLOCK AY 1
(U/O 877848-435, -436, -441,
-442)
–145B 880793-403A 3 PIVOT BLOCK AY 1
(U/O 877848-417, -418)
–150 880795-005 3 PIN, MACHINED (U/O 877848-417, 1
-418, -421, -422, -441, -442)
–150A 880795-001 3 PIN, MACHINED (U/O 877848-435, 1
-436)
–150B 880795-003 3 PIN, MACHINED (U/O 877848-435, 1
-436)
–155 NAS6204-18 3 BOLT 1
–160 NAS1352-08-6P 3 SCREW 3
–160A NAS514P440-4P 3 SCREW (U/O 877848-435, -436) 2
–165 NAS1149F0432P 3 WASHER 2
–170 MS21042-4 3 NUT 1
–175 873000-007 3 BUSHING 2
–176 LC029C01S 3 SPRING (TRUE P/N LC-029C-01- 1
S) (U/O 877848-435, -436)
–177 880791-401 3 HOUSING AY (U/O 877848-435, 1
-436)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–179 886181-001 2 SHIM - ARMREST PIVOT BLOCK A,B,C, 2
(OUTBD) (POST SB 886184-25- D,G,H
5084)
–179A 886181-001 2 SHIM - ARMREST PIVOT BLOCK E,F 4
(CTR) (POST SB 886184-25-
5084)
–179B 886181-003 2 SHIM - ARMREST PIVOT BLOCK E,F 2
(INBD) (POST SB 886184-25-
5084)
180 881887-407A 2 SHROUD AY, IAT (INBD CTR) A,C,G 1
–180A 881887-408A 2 SHROUD AY, IAT (INBD CTR) B,D,H 1
–180B 881887-405A 2 SHROUD AY, IAT (OUTBD CTR) 1
ATTACHING PARTS
185 NAS1352-08-6P 2 SCREW (2-TOP, 2-BTM) 4
---*---
190 879420-003B 2 SPREADER COVER (INBD) A,C,G 1
–190A 879420-004B 2 SPREADER COVER (INBD) B,D,H 1
ATTACHING PARTS
195 NAS602-12P 2 SCREW 1
---*---
–200 MS3367-5-9 2 STRAP (WA5047-220-200) 5
(ATTACHES RECL CABLE TO
DIAPHRAGM) (2-INBD & CTR,
1-OUTBD) (REPLD BY ITEM
200A)
–200A MS3367-2-9 2 STRAP (WA5047-264-201) 5
(ATTACHES RECL CABLE TO
DIAPHRAGM) (2-INBD & CTR,
1-OUTBD) (REPLS ITEM 200)
205 873661-411 2 RECLINE CABLE AY, 30 INCH A,B,C,D 3
G,H
–205A 873661-411 2 RECLINE CABLE AY, 30 INCH E,F 1
(OUTBD)
205 873661-407 2 RECLINE CABLE AY, 43 INCH E,F 2
(INBD & CTR)
–206 MS25281F5 2 P-CLAMP (TRUE P/N MS25281F- E,F 4
5)
ATTACHING PARTS
–207 NAS1352-08-6P 2 SCREW 1
---*---
210 858805-739B 2 FOOD TABLE AY, IAT (SEE IPL A,C,G 3
FIG. 4 FOR DETS)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–210A 858805-740B 2 FOOD TABLE AY, IAT (INBD) B,D,H 3
(SEE IPL FIG. 4 FOR DETS)
–210B 858805-739B 2 FOOD TABLE AY, IAT (SEE IPL E 1
FIG. 4 FOR DETS)
–210C 858805-740B 2 FOOD TABLE AY, IAT (INBD) F 1
(SEE IPL FIG. 4 FOR DETS)
ATTACHING PARTS
215 876416-007 2 PIN, MACHINED, IAT 1
---*---
220 877918-415B 2 ARMREST AY, IAT (INBD) A,C 1
(SEE IPL FIG. 5 FOR DETS)
–220A 877918-416B 2 ARMREST AY, IAT (INBD) B,D 1
(SEE IPL FIG. 5 FOR DETS)
220B 877918-417A 2 ARMREST AY, IAT (CTR) A,C 2
(SEE IPL FIG. 5 FOR DETS)
–220C 877918-418A 2 ARMREST AY, IAT (CTR) B,D 2
(SEE IPL FIG. 5 FOR DETS)
–220D 877918-417A 2 ARMREST AY, IAT (OUTBD-CTR) E 1
(SEE IPL FIG. 5 FOR DETS)
–220E 877918-418A 2 ARMREST AY, IAT (OUTBD-CTR) F 1
(SEE IPL FIG. 5 FOR DETS)
–220F 877918-415E 2 ARMREST AY, IAT (INBD) G 1
(SEE IPL FIG. 5 FOR DETS)
–220G 877918-416E 2 ARMREST AY, IAT (INBD) H 1
(SEE IPL FIG. 5 FOR DETS)
–220H 877918-417B 2 ARMREST AY, IAT (CTR) G 2
(SEE IPL FIG. 5 FOR DETS)
–220J 877918-418B 2 ARMREST AY, IAT (CTR) H 2
(SEE IPL FIG. 5 FOR DETS)
ATTACHING PARTS
225 NAS6204-17 2 BOLT (FWD) 1
230 NAS1149F0432P 2 WASHER (FWD) 1
235 NAS6204-9 2 BOLT (AFT) 1
240 NAS1149F0432P 2 WASHER (AFT) 1
---*---
–245 WA9658-2000-102 2 TAPE-HOOK, 2.0 INCH (BEIGE) AR
(AFT TUBE)
–250 NOT USED
THRU
–300 NOT USED
–305 NAS517-3-5 2 DELETED D
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–305A NAS517-3-5 2 DELETED D
–305B NAS517-3-8 2 DELETED D
–310 NOT USED
–315 882468-401A 2 BASEFRAME AY, TPL, F/R A 1
–315A 882468-402A 2 BASEFRAME AY, TPL, F/R B 1
–315B 882468-403A 2 BASEFRAME AY, TPL, F/R C,G 1
–315C 882468-404A 2 BASEFRAME AY, TPL, F/R D,H 1
–315D 882468-405A 2 BASEFRAME AY, TPL, F/R E 1
–315E 882468-406A 2 BASEFRAME AY, TPL, F/R F 1
320 878313-443A 3 BAR AY, BAGGAGE 1
(U/O 882468-401)
–320A 878313-444A 3 BAR AY, BAGGAGE 1
(U/O 882468-402)
–320B 878313-453A 3 BAR AY, BAGGAGE 1
(U/O 882468-403, -405)
–320C 878313-454A 3 BAR AY, BAGGAGE 1
(U/O 882468-404, -406)
ATTACHING PARTS
–325 NAS623-3-44 3 SCREW (INBD) 1
–330 5710-62-60 3 WASHER (INBD) (V86928) 2
–335 MS21042-3 3 NUT (INBD) 1
–340 NAS6204-8 3 BOLT (ATTACHES BAGGAGE BAR 2
TO LEG)
–345 NAS1515H4L 3 WASHER (ATTACHES BAGGAGE 2
BAR TO LEG)
---*---
–350 115121-001 4 PLUG 2
–355 877282-001 4 BAGGAGE BAR 1
(U/O 878313-443)
–355A 877282-002 4 BAGGAGE BAR 1
(U/O 878313-444)
–360 877208-025 4 SPLICE 1
–365 877208-021 4 SPLICE (U/O 878313-443) 1
–365A 877208-022 4 SPLICE (U/O 878313-444) 1
–365B 877208-033 4 SPLICE (U/O 878313-453) 1
–365C 877208-034 4 SPLICE (U/O 878313-454) 1
–370 878309-047 4 BAGGAGE BAR (U/O 878313-443) 1
–370A 878309-048 4 BAGGAGE BAR (U/O 878313-444) 1
–370B 878309-059 4 BAGGAGE BAR (U/O 878313-453) 1
–370C 878309-060 4 BAGGAGE BAR (U/O 878313-454) 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–375 877208-019 4 SPLICE 1
–380 878308-013 4 BAGGAGE BAR 1
(U/O 878313-443, -453)
–380A 878308-014 4 BAGGAGE BAR 1
(U/O 878313-444, -454)
–385 WA5085-52320402 4 RIVET 10
(TRUE P/N: WA5085-5232-0402)
–390 872809-003 3 SUPPORT, BAG BAR (INBD) 1
–395 880155-001 3 SUPPORT, BAG BAR (OUTBD) 1
ATTACHING PARTS
–400 NAS6203-34 3 SCREW (TOP) 1
–400A NAS6203-16 3 SCREW (BTM) 1
–405 NAS1149F0332P 3 WASHER (2-TOP, 2-BTM) 4
–410 MS21042-3 3 NUT (1-TOP, 1-BTM) 2
---*---
415 869254-487 3 DIAPHRAGM AY (RVT) (INBD) 1
(U/O 882468-401, -403, -405)
–415A 869254-488 3 DIAPHRAGM AY (RVT) (INBD) 1
(U/O 882468-402, -404, -406)
415B 869254-481 3 DIAPHRAGM AY (RVT) (OUTBD) 1
(U/O 882468-401, -403, -405)
–415C 869254-482 3 DIAPHRAGM AY (RVT) (OUTBD) 1
(U/O 882468-402, -404, -406)
415D 869254-483 3 DIAPHRAGM AY (RVT) (CTR) 1
(U/O 882468-401, -403, -405)
–415E 869254-484 3 DIAPHRAGM AY (RVT) (CTR) 1
(U/O 882468-402, -404, -406)
ATTACHING PARTS
–420 WA5088-52120606 3 RIVET 10
(TRUE P/N: WA5088-5212-0606)
---*---
425 872807-403 3 RECLINE LOCK, SOURCE 3
ATTACHING PARTS
430 AN316-6R 3 NUT (ATTACHES LOCK TO PIN) 2
435 MS35333-42 3 WASHER (ATTACHES LOCK TO 2
PIN)
440 NAS6204-11 3 BOLT (ATTACHES LOCK TO 1
QUADRANT ARM)
445 NAS1149F0416P 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
450 NAS1515H4L 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
455 MS21042-4 3 NUT (ATTACHES LOCK TO 1
QUADRANT ARM)
---*---
460 869224-001 3 PIN, HYDROLOK (OUTBD & CTR) 2
–460A 869224-003 3 PIN, HYDROLOK (INBD) 1
ATTACHING PARTS
465 NAS561P5-10 3 PIN 1
---*---
470 881194-428A 3 BACK AY (INBD & CTR) 2
(U/O 882468-401, -403, -405)
(SEE IPL FIG. 6 FOR DETS)
–470A 881194-427A 3 BACK AY (INBD & CTR) 2
(U/O 882468-402, -404, -406)
(SEE IPL FIG. 6 FOR DETS)
–470B 881194-427A 3 BACK AY (OUTBD) 1
(U/O 882468-401, -403, -405)
(SEE IPL FIG. 6 FOR DETS)
–470C 881194-428A 3 BACK AY (OUTBD) 1
(U/O 882468-402, -404, -406)
(SEE IPL FIG. 6 FOR DETS)
ATTACHING PARTS
475 NAS6604-1 3 BOLT 2
480 5710-62-60 3 WASHER (V86928) 1
---*---
485 873276-001 3 SPACER, BACK 6
490 878301-405B 3 LEG AY, F/R 2
(SEE IPL FIG. 7 FOR DETS)
495 882196-407A 3 SPREADER AY (OUTBD) 1
(U/O 882468-401, -403, -405)
(SEE IPL FIG. 8 FOR DETS)
–495A 882196-408A 3 SPREADER AY (OUTBD) 1
(U/O 882468-402, -404, -406)
(SEE IPL FIG. 8 FOR DETS)
ATTACHING PARTS
500 NAS517-3-5 3 SCREW (FWD) 1
500A NAS517-3-6 3 SCREW (AFT) (REPLD BY ITEM 1
500B)
–500B NAS517-3-8 3 SCREW (AFT) (REPLS ITEM 1
500A)
505 NAS1515H3L 3 WASHER 2
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
510 MS21042-3 3 NUT 2
---*---
515 873227-445A 3 SPREADER AY, F/R (INBD) 1
(U/O 882468-401, -403)
(SEE IPL FIG. 8 FOR DETS)
–515A 873227-446A 3 SPREADER AY, F/R (INBD) 1
(U/O 882468-402, -404)
(SEE IPL FIG. 8 FOR DETS)
–515B 882132-405A 3 SPREADER AY (INBD) 1
(U/O 882468-405)
(SEE IPL FIG. 8 FOR DETS)
–515C 882132-406A 3 SPREADER AY (INBD) 1
(U/O 882468-406)
(SEE IPL FIG. 8 FOR DETS)
520 873228-443A 3 SPREADER AY, F/R (INBD CTR) 1
(SEE IPL FIG. 9 FOR DETS) (U/O
882468-401, -402, -403, -404)
520A 874616-417A 3 SPREADER AY, F/R (OUTBD CTR) 1
(U/O 882468-401, -403)
(SEE IPL FIG. 9 FOR DETS)
–520B 874616-418A 3 SPREADER AY, F/R (OUTBD CTR) 1
(U/O 882468-402, -404)
(SEE IPL FIG. 9 FOR DETS)
–520C 874616-419A 3 SPREADER AY (INBD CTR) (U/O 1
882468-405) (SEE IPL FIG. 9
FOR DETS)
–520D 874616-420A 3 SPREADER AY (INBD CTR) (U/O 1
882468-406) (SEE IPL FIG. 9
FOR DETS)
–520E 873228-453A 3 SPREADER AY, F/R (OUTBD CTR) 1
(U/O 882468-405)
(SEE IPL FIG. 9 FOR DETS)
–520F 873228-454A 3 SPREADER AY, F/R (OUTBD CTR) 1
(U/O 882468-406)
(SEE IPL FIG. 9 FOR DETS)
525 879226-445 3 TUBE AY (FWD) (U/O 882468-401) 1
–525A 879226-446 3 TUBE AY (FWD) (U/O 882468-402) 1
–525B 879226-457 3 TUBE AY (FWD) (U/O 882468-403) 1
–525C 879226-458 3 TUBE AY (FWD) (U/O 882468-404) 1
–525D 879226-461 3 TUBE AY (FWD) (U/O 882468-405) 1
–525E 879226-462 3 TUBE AY (FWD) (U/O 882468-406) 1
530 879226-447 3 TUBE AY (AFT) (U/O 882468-401) 1
–530A 879226-448 3 TUBE AY (AFT) (U/O 882468-402) 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1
–530B 879226-459 3 TUBE AY (AFT) (U/O 882468-403, 1
-405)
–530C 879226-460 3 TUBE AY (AFT) (U/O 882468-404, 1
-406)
B
90
95
25
D
215
25
210
E
70
85
210 F
20 15
10
50
A
882157-441 SHOWN
485
490
530
395
C 480
395B
35
320
470
495
475
450
75
465
460
455
445 420
425
520
C 430
435
(REF)
440 405
410
415
410
D INBD
240
235
190
405
(REF)
220 205
195
230
225
E CTR
240
235 180
185
(4 PL)
220B 205
490
(REF)
230
225
F OUTBD
115
100
120
125
55
105
480 65
(REF)
60
65
60
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1A
–1 882157-441 0 SEAT AY, MODEL Z100 T/C, LH A RF
F/R DBL, IAT, NRW, 4” RECL
–1A 882157-442 0 SEAT AY, MODEL Z100 T/C, RH B RF
F/R DBL, IAT, NRW, 4” RECL
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1A
–80A 875587-015A 2 PLACARD, SAFETY (BND) (LIFE 2
VEST UNDER YOUR SEAT)
–85 882547-407A 2 DRESS COVER AY, LIT POCKET 2
(HEARTSTONE)
–85A 882547-407B 2 DRESS COVER AY, LIT POCKET RF
(SOUTHERN BELLE)
90 882545-403A 2 CUSHION AY, BACK W/DRESS 2
(HEARTSTONE)
–90A 882545-403B 2 CUSHION AY, BACK W/DRESS RF
(SOUTHERN BELLE)
95 882281-403 2 CUSHION AY, BACK FILLER 2
100 878424-403D 2 ARMCAP AY (OUTBD) 1
ATTACHING PARTS
105 NAS1351-3-8 2 SCREW (FWD) 1
–110 NAS1351-3-12 2 SCREW (AFT) 1
---*---
–115 877848-441C 2 ARMREST AY (OUTBD) A 1
–115A 877848-442C 2 ARMREST AY (OUTBD) B 1
ATTACHING PARTS
120 NAS1351-3-10P 2 SCREW 1
125 882665-001 2 WASHER 1
---*---
–130 877468-029 3 ARMREST CORE 1
–135 878280-021D 3 ARMREST BODY 1
(U/O 877848-441)
–135A 878280-022D 3 ARMREST BODY 1
(U/O 877848-442)
–140 877470-407 3 ARMREST AY 1
–145 880793-405 3 PIVOT BLOCK AY 1
–150 880795-005 3 PIN, MACHINED 1
–155 NAS6204-18 3 BOLT 1
–160 NAS1352-08-6P 3 SCREW 3
–165 NAS1149F0432P 3 WASHER 2
–170 MS21042-4 3 NUT 1
–175 873000-007 3 BUSHING 2
–179 886181-003 2 SHIM - ARMREST PIVOT BLOCK 2
(OUTBD) (POST SB 886184-25-
5084)
180 881887-405A 2 SHROUD AY, IAT (CTR) 1
ATTACHING PARTS
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1A
185 NAS1352-08-6P 2 SCREW (2-TOP, 2-BTM) 4
---*---
190 879420-003B 2 SPREADER COVER (INBD) A 1
–190A 879420-004B 2 SPREADER COVER (INBD) B 1
ATTACHING PARTS
195 NAS602-12P 2 SCREW 1
---*---
–200 MS3367-5-9 2 STRAP (WA5047-220-200) 3
(ATTACHES RECL CABLE TO
DIAPHRAGM) (REPLD BY ITEM
200A)
–200A MS3367-2-9 2 STRAP (WA5047-264-201) 3
(ATTACHES RECL CABLE TO
DIAPHRAGM) (REPLS ITEM 200)
205 873661-411 2 RECLINE CABLE AY, 30 INCH 2
210 858805-747A 2 FOOD TABLE AY, IAT (SEE IPL A 2
FIG. 4 FOR DETS)
–210A 858805-748A 2 FOOD TABLE AY, IAT (INBD) B 2
(SEE IPL FIG. 4 FOR DETS)
ATTACHING PARTS
215 876416-007 2 PIN, MACHINED, IAT 1
---*---
220 877918-415B 2 ARMREST AY, IAT (INBD) A 1
(SEE IPL FIG. 5 FOR DETS)
–220A 877918-416B 2 ARMREST AY, IAT (INBD) B 1
(SEE IPL FIG. 5 FOR DETS)
220B 877918-417A 2 ARMREST AY, IAT (CTR) A 1
(SEE IPL FIG. 5 FOR DETS)
–220C 877918-418A 2 ARMREST AY, IAT (CTR) B 1
(SEE IPL FIG. 5 FOR DETS)
ATTACHING PARTS
225 NAS6204-17 2 BOLT (FWD) 1
230 NAS1149F0432P 2 WASHER (FWD) 1
235 NAS6204-9 2 BOLT (AFT) 1
240 NAS1149F0432P 2 WASHER (AFT) 1
---*---
–245 WA9658-2000-102 2 TAPE-HOOK, 2.0 INCH (BEIGE) AR
(AFT TUBE)
–250 NOT USED
THRU
–310 NOT USED
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1A
–315 882468-407A 2 BASEFRAME AY, DBL, F/R A 1
–315A 882468-408A 2 BASEFRAME AY, DBL, F/R B 1
320 873555-479A 3 BAR AY, BAGGAGE 1
(U/O 882468-407)
–320A 873555-480A 3 BAR AY, BAGGAGE 1
(U/O 882468-408)
ATTACHING PARTS
–325 NAS623-3-14 3 SCREW 1
–330 NAS1149D0332J 3 WASHER 1
---*---
–335 NOT USED
THRU
–345 NOT USED
–350 872632-001A 4 PLUG 2
–355 873556-008 4 BAGGAGE BAR 1
(U/O 878313-479)
–355A 873556-007 4 BAGGAGE BAR 1
(U/O 878313-480)
–360 873558-005 4 SPLICE 1
ATTACHING PARTS
–365 WA5088-52320403 4 RIVET (TRUE P/N WA5088-5232- 4
0403)
---*---
–370 873557-085 4 BAGGAGE BAR 1
–375 NOT USED
THRU
–385 NOT USED
–390 872809-001 3 SUPPORT, BAG BAR 1
–395 869254-703 3 DIAPHRAGM AY (RVT) (INBD) 1
(U/O 882468-407)
–395A 869254-704 3 DIAPHRAGM AY (RVT) (INBD) 1
(U/O 882468-408)
–395B 869254-491 3 DIAPHRAGM AY (RVT) (OUTBD) 1
(U/O 882468-407)
–395C 869254-492 3 DIAPHRAGM AY (RVT) (OUTBD) 1
(U/O 882468-408)
ATTACHING PARTS
–400 WA5088-52120604 3 RIVET (TRUE P/N WA5088-5212- 4
0604) (INBD) (2-FWD, 2-AFT)
–400A WA5088-52120604 3 RIVET (TRUE P/N WA5088-5212- 2
0604) (OUTBD) (1-FWD, 1-AFT)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1A
–400B WA5088-52120603 3 RIVET (TRUE P/N WA5088-5212- 3
0603) (INBD) (2-FWD, 1-AFT)
–400C WA5088-52120603 3 RIVET (TRUE P/N WA5088-5212- 2
0603) (OUTBD) (3-FWD, 2-AFT)
---*---
–405 872807-403 3 RECLINE LOCK, SOURCE 2
ATTACHING PARTS
–410 AN316-6R 3 NUT (ATTACHES LOCK TO PIN) 2
415 MS35333-42 3 WASHER (ATTACHES LOCK TO 2
PIN)
–420 NAS6204-11 3 BOLT (ATTACHES LOCK TO 1
QUADRANT ARM)
425 NAS1149F0416P 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
430 NAS1515H4L 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
435 MS21042-4 3 NUT (ATTACHES LOCK TO 1
QUADRANT ARM)
---*---
440 869224-001 3 PIN, HYDROLOK 2
ATTACHING PARTS
445 NAS561P5-10 3 PIN 1
---*---
450 881194-418A 3 BACK AY (INBD) 1
(U/O 882468-407)
(SEE IPL FIG. 6 FOR DETS)
450A 881194-417A 3 BACK AY (INBD) 1
(U/O 882468-408)
(SEE IPL FIG. 6 FOR DETS)
450B 881194-417A 3 BACK AY (OUTBD) 1
(U/O 882468-407)
(SEE IPL FIG. 6 FOR DETS)
450C 881194-418A 3 BACK AY (OUTBD) 1
(U/O 882468-408)
(SEE IPL FIG. 6 FOR DETS)
ATTACHING PARTS
455 NAS6604-1 3 BOLT 2
460 5710-62-60 3 WASHER (V86928) 1
---*---
465 873276-001 3 SPACER, BACK 4
470 874619-413A 3 LEG AY (INBD) (U/O 882468-407) 1
(SEE IPL FIG. 7 FOR DETS)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
1A
470A 874619-414A 3 LEG AY, (INBD) (U/O 882468-407) 1
(SEE IPL FIG. 7 FOR DETS)
475 874699-413A 3 LEG AY (OUTBD) 1
(SEE IPL FIG. 7 FOR DETS)
480 882132-406A 3 SPREADER AY (OUTBD) 1
(U/O 882468-407)
(SEE IPL FIG. 8 FOR DETS)
480A 882132-405A 3 SPREADER AY (OUTBD) 1
(U/O 882468-408)
(SEE IPL FIG. 8 FOR DETS)
485 873227-457A 3 SPREADER AY, F/R (INBD) 1
(U/O 882468-407
(SEE IPL FIG. 8 FOR DETS)
485A 873227-458A 3 SPREADER AY, F/R (INBD) 1
(U/O 882468-408)
(SEE IPL FIG. 8 FOR DETS)
490 873228-455A 3 SPREADER AY, F/R (CTR) 1
(SEE IPL FIG. 9 FOR DETS)
495 878572-455 3 TUBE AY (FWD) (U/O 882468-407) 1
–495A 878572-456 3 TUBE AY (FWD) (U/O 882468-408) 1
500 878572-443 3 TUBE AY (AFT) (U/O 882468-407) 1
500A 878572-444 3 TUBE AY (AFT) (U/O 882468-408) 1
85 B
90
D
75A
75
E
25
E
65
110D
20 15
10
45
882157-403 SHOWN
A
545
550A
435
550
435R C
525
30
435F
560
330
540
535
555
520 540 530A
535
530
495
70
515
505
500
465
490 470
475 470
550 475
480
(REF)
C
485 450
455
460
455
D INBD
95 110
115
120
240 235
100
250
545
(REF)
245
250
245
E CTR
110F
95
115
120
235A
100
550
(REF)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–1 882157-403 0 SEAT AY, MODEL Z100 T/C, LH A RF
STD TPL, 4" RECL
–1A 882157-404 0 SEAT AY, MODEL Z100 T/C, RH B RF
STD TPL, 4" RECL
–1B 882157-405 0 SEAT AY, MODEL Z100 T/C, LH C RF
STD TPL, FWD EXIT, OUTBD PAX
LIMITED RECLINE, 3” & 4” RECL
–1C 882157-406 0 SEAT AY, MODEL Z100 T/C, RH D RF
STD TPL, FWD EXIT, OUTBD PAX
LIMITED RECLINE, 3” & 4” RECL
–1D 882157-407 0 SEAT AY, MODEL Z100 T/C, LH E RF
STD TPL, EXIT, NO RECLINE, NO
OUTBD ARM, 0” & 4”RECL
–1E 882157-408 0 SEAT AY, MODEL Z100 T/C, RH F RF
STD TPL, EXIT, NO RECLINE, NO
OUTBD ARM, 0” & 4” RECL
–1F 882157-409 0 SEAT AY, MODEL Z100 T/C, LH G RF
STD TPL, AFT EXIT, NO OUTBD
ARM, 4” RECL
–1G 882157-410 0 SEAT AY, MODEL Z100 T/C, RH H RF
STD TPL, AFT EXIT, NO OUTBD
ARM, 4” RECL
–1H 882157-411 0 SEAT AY, MODEL Z100 T/C, LH J RF
STD TPL, NARR, 4" RECL
–1J 882157-412 0 SEAT AY, MODEL Z100 T/C, RH K RF
STD TPL, NARR, 4" RECL
–1K 882157-413 0 SEAT AY, MODEL Z100 T/C, LH L RF
STD TPL, NARR, 4” RECL
–1L 882157-414 0 SEAT AY, MODEL Z100 T/C, RH M RF
STD TPL,NARR, 4" RECL
–1M 882157-415 0 SEAT AY, MODEL Z100 T/C, LH N RF
STD TPL, NARR AFT, NO RECL
–1N 882157-416 0 SEAT AY, MODEL Z100 T/C, RH P RF
STD TPL,NARR AFT, NO RECL
–1P 882157-417 0 SEAT AY, MODEL Z100 T/C, LH Q RF
STD TPL, NARR AFT, NO RECL
–1Q 882157-418 0 SEAT AY, MODEL Z100 T/C, RH R RF
STD TPL, NARR AFT, NO RECL
–1R 882157-419 0 SEAT AY, MODEL Z100 T/C, LH S RF
STD TPL, NARR AFT, 4” RECL
–1S 882157-420 0 SEAT AY, MODEL Z100 T/C, RH T RF
STD TPL,NARR AFT, 4” RECL
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–1T 882157-423 0 SEAT AY, MODEL Z100 T/C, LH U RF
STD TPL, 4" RECL
–1U 882157-424 0 SEAT AY, MODEL Z100 T/C, RH V RF
STD TPL, 4" RECL
–1V 882157-425 0 SEAT AY, MODEL Z100 T/C, LH W RF
STD TPL, FWD EXIT, OUTBD PAX
LIMITED RECLINE, 3” & 4” RECL
–1W 882157-426 0 SEAT AY, MODEL Z100 T/C, RH X RF
STD TPL, FWD EXIT, OUTBD PAX
LIMITED RECLINE, 3” & 4” RECL
–1X 882157-427 0 SEAT AY, MODEL Z100 T/C, LH Y RF
STD TPL, EXIT, NO RECLINE, NO
OUTBD ARM, 0” & 4”RECL
–1Y 882157-428 0 SEAT AY, MODEL Z100 T/C, RH Z RF
STD TPL, EXIT, NO RECLINE, NO
OUTBD ARM, 0” & 4” RECL
–1Z 882157-429 0 SEAT AY, MODEL Z100 T/C, LH AA RF
STD TPL, AFT EXIT, NO OUTBD
ARM, 4” RECL
–1AA 882157-430 0 SEAT AY, MODEL Z100 T/C, RH AB RF
STD TPL, AFT EXIT, NO OUTBD
ARM, 4” RECL
–1AB 882157-435 0 SEAT AY, MODEL Z100 T/C, LH AC RF
STD TPL, OUTBD PAX AFT, 4”
RECL
–1AC 882157-436 0 SEAT AY, MODEL Z100 T/C, RH AD RF
STD TPL, OUTBD PAX AFT, 4”
RECL
–1AD 882157-437 0 SEAT AY, MODEL Z100 T/C, LH AE RF
STD TPL, NAR, 4”RECL
–1AE 882157-438 0 SEAT AY, MODEL Z100 T/C, RH AF RF
STD TPL, NAR, 4”RECL
–1AF 882157-439 0 SEAT AY, MODEL Z100 T/C, LH AG RF
STD TPL, AFT NRW, 4” RECL
–1AG 882157-440 0 SEAT AY, MODEL Z100 T/C, RH AH RF
STD TPL, AFT NRW, 4” RECL
–1AH 882157-445 0 SEAT AY, MODEL Z100 T/C, LH AJ RF
STD TPL, NRW, 4” RECL
–1AJ 882157-446 0 SEAT AY, MODEL Z100 T/C, RH AK RF
STD TPL, NRW, 4” RECL
–1AK 882157-447 0 SEAT AY, MODEL Z100 T/C, LH AL RF
STD TPL, NRW, AFT, NO RECL
–1AL 882157-448 0 SEAT AY, MODEL Z100 T/C, RH AM RF
STD TPL, NRW, AFT, NO RECL
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–1AM 882157-451 0 SEAT AY, MODEL Z100 T/C, LH AN RF
STD TPL, 4” RECL
–1AN 882157-452 0 SEAT AY, MODEL Z100 T/C, RH AP RF
STD TPL, 4” RECL
–1AP 882157-453 0 SEAT AY, MODEL Z100 T/C, LH AQ RF
STD TPL, FWD EXIT (OUTBD
PAX LIMITED RECL) 3 & 4”
RECL
–1AQ 882157-454 0 SEAT AY, MODEL Z100 T/C, RH AR RF
STD TPL, FWD EXIT (OUTBD
PAX LIMITED RECL) 3 & 4”
RECL
–1AR 882157-455 0 SEAT AY, MODEL Z100 T/C, LH AS RF
STD TPL, EXIT, (NO OUTBD
ARM), NO RECL
–1AS 882157-456 0 SEAT AY, MODEL Z100 T/C, RH AT RF
STD TPL, EXIT, (NO OUTBD
ARM), NO RECL
–1AT 882157-457 0 SEAT AY, MODEL Z100 T/C, LH AU RF
STD TPL, AFT EXIT, (NO
OUTBD ARM), 4” RECL
–1AU 882157-458 0 SEAT AY, MODEL Z100 T/C, RH AV RF
STD TPL, AFT EXIT, (NO
OUTBD ARM), 4” RECL
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–2J 882270-402 1 SEAT STRUCTURE AY, RH STD K 1
TPL, NARR
–2K 882271-401 1 SEAT STRUCTURE AY, LH STD L 1
TPL, NARR
–2L 882271-402 1 SEAT STRUCTURE AY, RH STD M 1
TPL, NARR
–2M 882272-401 1 SEAT STRUCTURE AY, LH STD N 1
TPL, NARR AFT
–2N 882272-402 1 SEAT STRUCTURE AY, RH STD P 1
TPL, NARR AFT
–2P 882270-403 1 SEAT STRUCTURE AY, LH STD Q,S,AL 1
TPL, NARR AFT
–2Q 882270-404 1 SEAT STRUCTURE AY, RH STD R,T,AM 1
TPL, NARR AFT
–2R 882264-403 1 SEAT STRUCTURE AY, LH STD U 1
TPL
–2S 882264-404 1 SEAT STRUCTURE AY, RH STD V 1
TPL
–2T 882265-403 1 SEAT STRUCTURE AY, LH STD W 1
TPL, FWD EXIT, OUTBD
–2U 882265-404 1 SEAT STRUCTURE AY, RH STD X 1
TPL, FWD EXIT, OUTBD
–2V 882267-403 1 SEAT STRUCTURE AY, LH STD Y 1
TPL, EXIT, OUTBD
–2W 882267-404 1 SEAT STRUCTURE AY, RH STD Z 1
TPL, EXIT, OUTBD
–2X 882268-403 1 SEAT STRUCTURE AY, LH STD AA 1
TPL, AFT EXIT, OUTBD
–2Y 882268-404 1 SEAT STRUCTURE AY, RH STD AB 1
TPL, AFT EXIT, OUTBD
–2Z 882265-405 0 SEAT STRUCTURE AY, LH STD AC RF
TPL, OUTBD PAX AFT
–2AA 882265-406 0 SEAT STRUCTURE AY, RH STD AD RF
TPL, OUTBD PAX AFT
–2AB 882270-405 0 SEAT STRUCUTRE AY, LH STD AE RF
TPL, NAR
–2AC 882270-406 0 SEAT STRUCTURE AY, RH STD AF RF
TPL, NAR
–2AD 882270-407 0 SEAT STRUCTURE AY, LH STD AG RF
TPL, AFT NRW
–2AE 882270-408 0 SEAT STRUCTURE AY, RH STD AH RF
TPL, AFT NRW
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–2AF 882270-409 0 SEAT STRUCTURE AY, LH STD AJ RF
TPL, NRW
–2AG 882270-410 0 SEAT STRUCTURE AY, RH STD AK RF
TPL, NRW
–2AH 882264-407 0 SEAT STRUCTURE AY, LH STD AN RF
TPL, NRW, AFT
–2AJ 882264-408 0 SEAT STRUCTURE AY, RH STD AP RF
TPL, NRW, AFT
–2AK 882265-407 0 SEAT STRUCTURE AY, LH STD AQ RF
TPL
–2AL 882265-408 0 SEAT STRUCTURE AY, RH STD AR RF
TPL
–2AM 882267-405 0 SEAT STRUCTURE AY, LH STD AS RF
TPL, FWD EXIT
–2AN 882267-406 0 SEAT STRUCTURE AY, LH STD AT RF
TPL, FWD EXIT
–2AP 882268-405 0 SEAT STRUCTURE AY, LH STD AU RF
TPL, EXIT
–2AQ 882268-406 0 SEAT STRUCTURE AY, RH STD AV RF
TPL, EXIT,
–5 882427 2 TRIM AND FINISH A-AH RF
–5A 885580 2 TRIM AND FINISH AJ-AV RF
10 882450-411 2 CUSHION AY, BTM A-H, 3
U-AD,
AU-AV
–10A 882450-411 2 CUSHION AY, BTM (INBD & CTR) J,K,Q,R 2
(REPLD BY ITEM 10C FOR EFF AJ,AK
CODES Q & R)
–10B 882450-405 2 CUSHION AY, BTM (OUTBD) J,K,Q,R 1
(REPLD BY ITEM 10C FOR EFF AE-AK
CODES Q & R)
–10C 882450-405 2 CUSHION AY, BTM L,M,Q, 3
(REPLS ITEMS 10A & 10B FOR R,S,T,
EFF CODES Q & R) AL,AM
–10D 882450-407 2 CUSHION AY, BTM (REPLD BY N,P 3
ITEM 10F, 10G)
–10E 882450-407 2 CUSHION AY, BTM L,M 3
–10F 882450-407 2 CUSHION AY, BTM (INBD & N,P 2
OUTBD) (REPLS ITEM 10D)
–10G 882450-409 2 CUSHION AY, BTM (CTR) (REPLS N,P 1
ITEM 10D)
–10H 882450-411 2 CUSHION AY, BTM (INBD & CTR) AE-AH 2
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
15 882546-411A 3 DRESS COVER AY, BTM 1
(U/O 882450-411)
(HEARTSTONE)
–15A 882546-411B 3 DRESS COVER AY, BTM RF
(U/O 882450-411)
(SOUTHERN BELLE)
–15B 882546-405A 3 DRESS COVER AY, BTM 1
(U/O 882450-405)
(HEARTSTONE)
–15C 882546-405B 3 DRESS COVER AY, BTM RF
(U/O 882450-405)
(SOUTHERN BELLE)
–15D 882546-407A 3 DRESS COVER AY, BTM 1
(U/O 882450-407)
(HEARTSTONE)
–15E 882546-407B 3 DRESS COVER AY, BTM RF
(U/O 882450-407)
(SOUTHERN BELLE)
–15F 882546-409A 3 DRESS COVER AY, BTM 1
(U/O 882450-409)
(HEARTSTONE)
–15G 882546-409B 3 DRESS COVER AY, BTM RF
(U/O 882450-409)
(SOUTHERN BELLE)
20 882456-411 3 CUSHION AY, FBLK 1
(U/O 882450-411)
–20A 882456-405 3 CUSHION AY, FBLK 1
(U/O 882450-405)
–20B 882456-407 3 CUSHION AY, FBLK 1
(U/O 882450-407)
–20C 882456-409 3 CUSHION AY, FBLK 1
(U/O 882450-409)
25 2194-1-051-8031 2 SEAT BELT, STD (V35FB9) 3
30 861615-001 2 NAMEPLATE (TSO) NP
–30A 861615-003 2 NAMEPLATE (MOD) NP
–35 867649-003 2 PLACARD, RFID NP
–40 WA9652-100-102 2 TAPE, ADHESIVE BACKED, 2.0 AR
INCH (2.5 INCH PIECE)
45 880971-401A 2 POUCH AY, LIFE VEST (REPLD BY A-T 3
ITEM 45B)
–45A 880971-403A 2 POUCH AY, LIFE VEST (REPLD BY U-AB 3
ITEM 45B)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–45B 880971-405A 2 POUCH AY, LIFE VEST (REPLS A-AB 3
ITEM 45, 45A)
–45C 880971-405A 2 POUCH AY, LIFE VEST AC-AV 3
–50 NOT USED
THRU
–60 NOT USED
65 869348-437A 2 FOOD TABLE AY (AFT-MOUNTED) A-H 3
(SEE IPL FIG. 3 FOR DETS) (PRE
SB 883034-25-4743) (REPLD BY
ITEM 65E)
–65A 869348-437A 2 FOOD TABLE AY (AFT-MOUNTED) J,K 2
(INBD & CTR) (SEE IPL FIG. 3
FOR DETS) (PRE SB 883034-25-
4743) (REPLD BY ITEM 65F)
–65B 869348-439A 2 FOOD TABLE AY (AFT-MOUNTED) J,K 1
(OUTBD) (SEE IPL FIG. 3 FOR
DETS) (PRE SB 883034-25-4743)
(REPLD BY ITEM 65G)
–65C 869348-439A 2 FOOD TABLE AY (AFT-MOUNTED) L,M 3
(SEE IPL FIG. 3 FOR DETS) (PRE
SB 883034-25-4743) (REPLD BY
ITEM 65H)
–65D 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) U-AB, 3
(SEE IPL FIG. 3 FOR DETS) AN-AV
–65E 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) A-H 3
(SEE IPL FIG. 3 FOR DETS)
(POST SB 883034-25-4743)
(REPLS ITEM 65)
–65F 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) J,K 2
(INBD & CTR) (SEE IPL FIG. 3
FOR DETS) (POST SB 883034-
25-4743) (REPLS ITEM 65A)
–65G 869348-445A 2 FOOD TABLE AY (AFT-MOUNTED) J,K 1
(OUTBD) (SEE IPL FIG. 3 FOR
DETS) (POST SB 883034-25-
4743) (REPLS ITEM 65B)
–65H 869348-445A 2 FOOD TABLE AY (AFT-MOUNTED) L,M 3
(SEE IPL FIG. 3 FOR DETS)
(POST SB 883034-25-4743)
(REPLS ITEM 65C)
–65J 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) AC-AF 2
(SEE IPL FIG. 3 FOR DETS)
–65K 869348-445A 2 FOOD TABLE AY (AFT-MOUNTED) AJ,AK 1
(SEE IPL FIG. 3 FOR DETS)
(OUTBD)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–65L 869348-449A 2 FOOD TABLE AY (AFT-MOUNTED) AJ,AK 2
(SEE IPL FIG. 3 FOR DETS)
(INBD & CTR)
ATTACHING PARTS
70 NAS1351-3-26P 2 SCREW 2
---*---
75 875587-013A 2 PLACARD, SAFETY (BND) A-M, 3
(FASTEN SEAT BELT WHILE U-AF,
SEATED) AJ,AK,
AN-AV
75A 875587-015A 2 PLACARD, SAFETY (BND) (LIFE A-M, 3
VEST UNDER YOUR SEAT) U-AF,
AJ,AK,
AN-AV
–80 882547-405A 2 DRESS COVER AY, LIT POCKET A-M 3
(HEARTSTONE) (REPLD BY
ITEMS 80H THRU 80S)
–80A 882547-405B 2 DRESS COVER AY, LIT POCKET A-M RF
(SOUTHERN BELLE) (REPLD BY
ITEMS 80H THRU 80N)
–80B 882547-405A 2 DRESS COVER AY, LIT POCKET U-AF 2
(INBD & CTR) (HEARTSTONE)
–80C 882547-405B 2 DRESS COVER AY, LIT POCKET U-AF RF
(INBD & CTR)
(SOUTHERN BELLE)
–80D 882547-417A 2 DRESS COVER AY, LIT POCKET U,W,Y, 1
(OUTBD) (HEARTSTONE) AA
–80E 882547-417B 2 DRESS COVER AY, LIT POCKET U,W,Y, RF
(OUTBD) (SOUTHERN BELLE) AA
–80F 882547-418A 2 DRESS COVER AY, LIT POCKET V,X,Z, 1
(OUTBD) (HEARTSTONE) AB
–80G 882547-418B 2 DRESS COVER AY, LIT POCKET V,X,Z, RF
(OUTBD) (SOUTHERN BELLE) AB
–80H 882547-405A 2 DRESS COVER AY, LIT POCKET A-M 2
(HEARTSTONE) (INBD & CTR)
(REPLS ITEM 80)
–80J 882547-405B 2 DRESS COVER AY, LIT POCKET A-M RF
(SOUTHERN BELLE) (INBD &
CTR) (REPLS ITEM 80)
–80K 882547-417A 2 DRESS COVER AY, LIT POCKET A,C,E,G 1
(HEARTSTONE) (OUTBD)
(REPLS ITEM 80)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–80L 882547-417B 2 DRESS COVER AY, LIT POCKET A,C,E,G RF
(SOUTHERN BELLE) (INBD &
CTR) (REPLS ITEM 80)
–80M 882547-418A 2 DRESS COVER AY, LIT POCKET B,D,F,H 1
(HEARTSTONE) (OUTBD)
(REPLS ITEM 80)
–80N 882547-418B 2 DRESS COVER AY, LIT POCKET B,D,F,H RF
(SOUTHERN BELLE) (INBD &
CTR) (REPLS ITEM 80)
–80P 882547-415A 2 DRESS COVER AY, LIT POCKET J,L 1
(HEARTSTONE) (OUTBD)
(REPLS ITEM 80)
–80Q 882547-415B 2 DRESS COVER AY, LIT POCKET J,L RF
(SOUTHERN BELLE) (OUTBD)
(REPLS ITEM 80)
–80R 882547-416A 2 DRESS COVER AY, LIT POCKET K,M 1
(HEARTSTONE) (OUTBD)
(REPLS ITEM 80)
–80S 882547-416B 2 DRESS COVER AY, LIT POCKET K,M RF
(SOUTHERN BELLE) (OUTBD)
(REPLS ITEM 80)
–80T 882547-415A 2 DRESS COVER AY, LIT POCKET AG 1
(HEARTSTONE) (OUTBD)
–80U 882547-415B 2 DRESS COVER AY, LIT POCKET AG RF
(SOUTHERN BELLE) (OUTBD)
–80V 882547-416A 2 DRESS COVER AY, LIT POCKET AH 1
(HEARTSTONE) (OUTBD)
–80W 882547-416B 2 DRESS COVER AY, LIT POCKET AH RF
(SOUTHERN BELLE) (OUTBD)
–80X 882547-419A 2 DRESS COVER AY, LIT POCKET AJ, AK, 2
(HEARTSTONE) (INBD & CTR) AN-AV
–80Y 882547-423A 2 DRESS COVER AY, LIT POCKET AJ 1
(HEARTSTONE) (OUTBD)
–80Z 882547-424A 2 DRESS COVER AY, LIT POCKET AK 1
(HEARTSTONE) (OUTBD)
–80AA 882547-425A 2 DRESS COVER AY, LIT POCKET AN,AQ, 1
(HEARTSTONE) (OUTBD) AS,AU
–80AB 882547-426A 2 DRESS COVER AY, LIT POCKET AP,AR, 1
(HEARTSTONE) (OUTBD) AT,AV
85 882545-407A 2 CUSHION AY, BACK W/DRESS A-H, 3
(HEARTSTONE) U-AB,
AN-AV
–85A 882545-407B 2 CUSHION AY, BACK W/DRESS A-H, RF
(SOUTHERN BELLE) U-AB
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–85B 882545-407A 2 CUSHION AY, BACK W/DRESS J,K, 2
(INBD & CTR) (HEARTSTONE) AC-AF,
AJ,AK
–85C 882545-407B 2 CUSHION AY, BACK W/DRESS J,K RF
(INBD & CTR) AC-AF
(SOUTHERN BELLE)
–85D 882545-401A 2 CUSHION AY, BACK W/DRESS J,K,AE, 1
(OUTBD) (HEARTSTONE) AF,AJ,
AK
–85E 882545-401B 2 CUSHION AY, BACK W/DRESS J,K,AE, RF
(OUTBD) (SOUTHERN BELLE) AF
–85F 882545-401A 2 CUSHION AY, BACK W/DRESS L,M 3
(HEARTSTONE)
–85G 882545-401B 2 CUSHION AY, BACK W/DRESS L,M RF
(SOUTHERN BELLE)
–85H 882545-403A 2 CUSHION AY, BACK W/DRESS N,P 3
(HEARTSTONE)
(REPLD BY ITEM 85P)
–85J 882545-403B 2 CUSHION AY, BACK W/DRESS N,P RF
(SOUTHERN BELLE)
(REPLD BY ITEM 85Q)
–85K 882545-411A 2 CUSHION AY, BACK W/DRESS Q,R 2
(INBD & CTR) (HEARTSTONE)
(REPLD BY ITEM 85R)
–85L 882545-411B 2 CUSHION AY, BACK W/DRESS Q,R RF
(INBD & CTR) (SOUTHERN
BELLE) (REPLD BY ITEM 85S)
–85M 882545-409A 2 CUSHION AY, BACK W/DRESS Q,R 1
(OUTBD) (HEARTSTONE)
(REPLD BY ITEM 85R)
–85N 882545-409B 2 CUSHION AY, BACK W/DRESS Q,R RF
(OUTBD) (SOUTHERN BELLE)
(REPLD BY ITEM 85S)
–85P 882545-405A 2 CUSHION AY, BACK W/DRESS N,P 3
(HEARTSTONE)
(REPLS ITEM 85H)
–85Q 882545-405B 2 CUSHION AY, BACK W/DRESS N,P RF
(SOUTHERN BELLE)
(REPLS ITEM 85J)
–85R 882545-409A 2 CUSHION AY, BACK W/DRESS Q,R,S,T 3
(INBD & CTR) (HEARTSTONE) AL, AM
(REPLS ITEMS 85K & 85M FOR
EFF. Q & R)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–85S 882545-409B 2 CUSHION AY, BACK W/DRESS Q,R,S,T RF
(INBD & CTR) (SOUTHERN
BELLE) (REPLS ITEMS 85L & 85N
FOR EFF. Q & R)
–85T 882545-411A 2 CUSHION AY, BACK W/DRESS AC,AD 1
(OUTBD) (HEARTSTONE)
–85U 882545-411B 2 CUSHION AY, BACK W/DRESS AC,AD RF
(OUTBD) (SOUTHERN BELLE)
–85V 882452-407A 2 CUSHION AY, BACK W/DRESS AG,AH 2
(INBD & CTR) (HEARTSTONE)
(REPLD BY ITEM 85AB)
–85W 882452-407B 2 CUSHION AY, BACK W/DRESS AG,AH RF
(INBD & CTR) (SOUTHERN
BELLE) (REPLD BY ITEM 85AC)
–85X 882452-401A 2 CUSHION AY, BACK W/DRESS AG,AH 1
(OUTBD) (HEARTSTONE)
(REPLD BY ITEM 85Z)
–85Y 882452-401B 2 CUSHION AY, BACK W/DRESS AG,AH RF
(OUTBD) (SOUTHERN BELLE)
(REPLD BY ITEM 85AA)
–85Z 882452-409A 2 CUSHION AY, BACK W/DRESS AG,AH 1
(OUTBD) (HEARTSTONE)
(REPLS ITEM 85X)
–85AA 882452-409B 2 CUSHION AY, BACK W/DRESS AG,AH RF
(OUTBD) (SOUTHERN BELLE)
(REPLS ITEM 85Y)
–85AB 882452-411A 2 CUSHION AY, BACK W/DRESS AG,AH 2
(INBD & CTR) (HEARTSTONE)
(REPLS ITEM 85V)
–85AC 882452-411B 2 CUSHION AY, BACK W/DRESS AG,AH RF
(INBD & CTR) (SOUTHERN
BELLE) (REPLS ITEM 85W)
90 882281-405 2 CUSHION AY, BACK FILLER A-H, 3
U-AB,
AN-AV
–90A 882281-405 2 CUSHION AY, BACK FILLER J,K, 2
(INBD & CTR) AC-AF,
AJ,AK
–90B 882281-401 2 CUSHION AY, BACK FILLER J,K,AJ, 1
(OUTBD) AK
–90C 882281-401 2 CUSHION AY, BACK FILLER L,M 3
95 878424-403D 2 ARMCAP AY A-D,J-X 4
AC-AH
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–95A 878424-403D 2 ARMCAP AY (INBD & CTR) E-H, 3
Y-AB
–95B 878424-403F 2 ARMCAP AY AJ-AR 4
–95C 878424-403F 2 ARMCAP AY (INBD & CTR) AS-AV 3
ATTACHING PARTS
100 NAS1351-3-8 2 SCREW (FWD) 1
–105 NAS1351-3-12 2 SCREW (AFT) 1
---*---
110 877848-415C 2 ARMREST AY (INBD) (REPLD BY A,C,G,J 1
ITEM 110Q) L,N,Q,S
–110A 877848-416C 2 ARMREST AY (INBD) (REPLS BY B,D,H,K 1
ITEM 110R) M,P,R,T
–110B 877848-423B 2 ARMREST AY (INBD) (REPLD BY E 1
ITEM 110S)
–110C 877848-424C 2 ARMREST AY (INBD) (REPLD BY F 1
ITEM 110T)
110D 877848-421D 2 ARMREST AY (OUTBD) (REPLD A,C,J,L, 1
BY ITEM 110U) N,Q,S
–110E 877848-422D 2 ARMREST AY (OUTBD) (REPLD B,D,K, 1
BY ITEM 110V) M,P,R,T
110F 877848-417C 2 ARMREST AY (CTR) A,C,G,J 2
L,N,Q,S
U,W,AA
AC,AE
AG,AJ,
AL,AN,
AQ,AU
–110G 877848-418C 2 ARMREST AY (CTR) B,D,H,K 2
M,P,R,T
V,X,AB
AD,AF
AH,AK,
AM,AP,
AR,AV
–110H 877848-419C 2 ARMREST AY (CTR) E,F,Y,Z, 2
AS,AT
–110J 877848-435C 2 ARMREST AY (INBD) U,W,AA 1
AC,AE,
AH,AJ,
AL,AN,
AQ,AU
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–110K 877848-436C 2 ARMREST AY (INBD) V,X,AB, 1
AD,AF,
AH,AK,
AM,AP,
AR,AV
–110L 877848-443C 2 ARMREST AY (INBD) Y,AS 1
–110M 877848-444C 2 ARMREST AY (INBD) Z,AT 1
–110N 877848-441C 2 ARMREST AY (OUTBD) U,W 1
AC,AE,
AH,AJ,
AL,AN,
AQ
–110P 877848-442C 2 ARMREST AY (OUTBD) V,X 1
AD,AF,
AH,AK,
AM,AP,
AR
110Q 877848-435C 2 ARMREST AY (INBD) (REPLS ITEM A,C,G,J 1
110) L,N,Q,S
–110R 877848-436C 2 ARMREST AY (INBD) (REPLS ITEM B,D,H,K 1
110A) M,P,R,T
–110S 877848-443C 2 ARMREST AY (INBD) (REPLS ITEM E 1
110B)
–110T 877848-444C 2 ARMREST AY (INBD) (REPLS ITEM F 1
110C)
110U 877848-441D 2 ARMREST AY (OUTBD) (REPLS A,C,J,L, 1
ITEM 110D) N,Q,S
–110V 877848-442D 2 ARMREST AY (OUTBD) (REPLS B,D,K, 1
ITEM 110E) M,P,R,T
ATTACHING PARTS
115 NAS1351-3-10P 2 SCREW 1
120 882665-001 2 WASHER 1
---*---
–125 877468-029 3 ARMREST CORE 1
–130 878280-013C 3 ARMREST BODY 1
(U/O 877848-415, -435)
–130A 878280-014C 3 ARMREST BODY 1
(U/O 877848-416, -436)
–130B 878280-023B 3 ARMREST BODY 1
(U/O 877848-423, -443)
–130C 878280-024C 3 ARMREST BODY 1
(U/O 877848-424, -444)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–130D 878280-021D 3 ARMREST BODY 1
(U/O 877848-421, -441)
–130E 878280-022D 3 ARMREST BODY 1
(U/O 877848-422, -442)
–130F 878280-017C 3 ARMREST BODY 1
(U/O 877848-419)
–130G 878280-019C 3 ARMREST BODY 1
(U/O 877848-417)
–130H 878280-020C 3 ARMREST BODY 1
(U/O 877848-418)
–135 877470-407 3 ARMREST AY 1
–140 880791-401 3 HOUSING AY 1
(U/O 877848-415, -416, -423, -424,
-435, -436, -443, -444)
–145 880793-401A 3 PIVOT BLOCK AY 1
(U/O 877848-415, -416, -421
THRU -424)
–145A 880793-403A 3 PIVOT BLOCK AY 1
(U/O 877848-417 THRU -419)
–145B 880793-405 3 PIVOT BLOCK AY 1
(U/O 877848-435, -436, -441
THRU -444)
–150 880795-001 3 PIN, MACHINED 1
(U/O 877848-415, -416, -423, -424,
-435, -436, -443, -444)
–150A 880795-003 3 PIN, MACHINED 1
(U/O 877848-415, -416, -423, -424,
-435, -436, -443, -444)
–150B 880795-005 3 PIN, MACHINED 1
(U/O 877848-417 THRU -419,
-421, -422, -441, -442)
–155 NAS6204-18 3 BOLT 1
–160 NAS1352-08-6P 3 SCREW 3
–165 NAS514P440-4P 3 SCREW (U/O 877848-415, -416, 2
-423, -424, -435, -436, -443, -444)
–170 NAS1149F0432P 3 WASHER 2
–175 MS21042-4 3 NUT 1
–180 873000-007 3 BUSHING 2
–185 LC029C01S 3 SPRING (V1A699) 1
(TRUE P/N: LC-029C-01-S)
(U/O 877848-415, -416, -423,
-424, -435, -436, -443, -444)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–189 8886181-001 2 SHIM - ARMREST PIVOT BLOCK A-D, 6
(CTR & OUTBD) (POST SB J-X,
886184-25-5084) AC-AR,
–189A 8886181-001 2 SHIM - ARMREST PIVOT BLOCK E-H, 4
(CTR) (POST SB 886184-25-5084) Y-AB,
AS-AV
–189B 8886181-003 2 SHIM - ARMREST PIVOT BLOCK 2
(INBD) (POST SB 886184-25-
5084)
–190 879933-401 2 BRACKET AY, SPREADER COVER E-H, 1
Y-AB,
AS-AV
–195 879934-001 2 BRACKET, SPREADER COVER E-H, 1
Y-AB,
AS-AV
–200 879516-001B 2 COVER, SPREADER E,G,Y, 1
AA,AS,
AU
–200A 879516-002B 2 COVER, SPREADER F,H,Z, 1
AB,AT,
AV
ATTACHING PARTS
–205 NAS602-24P 2 SCREW 2
–210 NAS42DD6A22N 2 SPACER 2
(TRUE P/N NAS42DD6A-22N)
---*---
–215 MS25281F3 2 “P” CLAMP (INBD & CTR) A-D, 6
(TRUE P/N: MS25281-F3) (REPLD G-T
BY ITEM 215B)
–215A MS25281F5 2 “P” CLAMP (INBD & CTR) U-X,AA, 6
(TRUE P/N: MS25281-F5) AB-AR,
AU,AV
–215B MS25281F5 2 “P” CLAMP (INBD & CTR) A-D, 6
(TRUE P/N: MS25281-F3) (REPLS G-T
ITEM 215)
ATTACHING PARTS
–220 NAS1352-08-6P 2 SCREW 1
–225 NAS620-8L 2 WASHER 1
---*---
–230 MS3367-5-9 2 STRAP (WA5047-220-200) A-D, 5
(ATTACHES RECL CABLE TO G-M,
DIAPHRAGM) (REPLD BY ITEM Q-X,
230B) AA-AH,
AL,AM
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–230A MS3367-5-9 2 STRAP (WA5047-220-200) N,P 4
(ATTACHES RECL CABLE TO
DIAPHRAGM) (REPLD BY ITEM
230C)
–230B MS3367-2-9 2 STRAP (WA5047-264-201) A-D, 5
(ATTACHES RECL CABLE TO G-M,
DIAPHRAGM) (REPLS ITEM 230) Q-X,
AA-AR
–230C MS3367-2-9 2 STRAP (WA5047-264-201) N,P,AU, 4
(ATTACHES RECL CABLE TO AV
DIAPHRAGM) (REPLS ITEM
230A)
235 873661-407 2 RECLINE CABLE AY, 43 INCH A-D, 2
(INBD & CTR) G-X,
AA-AR,
AU,AV
235A 873661-401 2 RECLINE CABLE AY, 32 INCH A-D, 1
(OUTBD) G-X,
AA-AR,
AU,AV
–235B 873661-401 2 DELETED D
–235C 873661-407 2 DELETED D
240 873563-037C 2 BUMPER, STD (INBD) A,C,E, 1
G,J,L,N,
Q,S,U,
W,Y,AA
AC,AE,
AG,AJ,
AL,AN,
AQ,AS,
AU
–240A 873563-038C 2 BUMPER, STD (INBD) B,D,F, 1
H,K,M,
P,R,T,V,
X,Z,AB
AD,AF,
AH,AK,
AM,AP,
AR,AT,
AV
ATTACHING PARTS
245 NAS603-14P 2 SCREW 2
250 NAS1149D0316J 2 WASHER 2
---*---
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–255 WA9658-2000-102 2 TAPE-HOOK, 2.0 INCH (BEIGE) AR
(AFT TUBE)
–260 857126-025 2 CLOSURE, RECLINE LOCK A-T 2
AC-AR
–260A 857126-025 2 CLOSURE, RECLINE LOCK U,V 1
–260B 857126-025 2 CLOSURE, RECLINE LOCK W,X 2
–260C 857126-025 2 CLOSURE, RECLINE LOCK Y-AB, 4
AS-AV
ATTACHING PARTS
–265 MS3367-2-9 2 STRAP, NYLON (WA5047-264-201) AR
---*---
–270 NOT USED
THRU
–320 NOT USED
–325 882469-401A 2 BASEFRAME AY, STD TPL A 1
–325A 882469-402A 2 BASEFRAME AY, STD TPL B 1
–325B 882469-403A 2 BASEFRAME AY, FWD EXIT TPL C 1
–325C 882469-404A 2 BASEFRAME AY, FWD EXIT TPL D 1
–325D 882469-405A 2 BASEFRAME AY, EXIT TPL E 1
–325E 882469-406A 2 BASEFRAME AY, EXIT TPL F 1
–325F 882469-407A 2 BASEFRAME AY, EXIT AFT TPL G 1
–325G 882469-408A 2 BASEFRAME AY, EXIT AFT TPL H 1
–325H 882470-401A 2 BASEFRAME AY, NAR TPL J,AJ 1
–325J 882470-402A 2 BASEFRAME AY, NAR TPL K,AK 1
–325K 882470-403A 2 BASEFRAME AY, NAR TPL L 1
–325L 882470-404A 2 BASEFRAME AY, NAR TPL M 1
–325M 882471-401A 2 BASEFRAME AY, AFT TPL N 1
–325N 882471-402A 2 BASEFRAME AY, AFT TPL P 1
–325P 882471-403A 2 BASEFRAME AY, AFT TPL Q,S,AL 1
–325Q 882471-404A 2 BASEFRAME AY, AFT TPL R,T,AM 1
–325R 882469-409A 2 BASEFRAME AY, STD TPL U,AU 1
–325S 882469-410A 2 BASEFRAME AY, STD TPL V,AP 1
–325T 882469-411A 2 BASEFRAME AY, FWD EXIT TPL W,AQ 1
–325U 882469-412A 2 BASEFRAME AY, FWD EXIT TPL X,AR 1
–325V 882469-413A 2 BASEFRAME AY, EXIT TPL Y,AS 1
–325W 882469-414A 2 BASEFRAME AY, EXIT TPL Z,AT 1
–325X 882469-415A 2 BASEFRAME AY, EXIT AFT TPL AA,AU 1
–325Y 882469-416A 2 BASEFRAME AY, EXIT AFT TPL AB,AV 1
–325Z 882469-417A 2 BASEFRAME AY, FWD EXIT TPL AC 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–325AA 882469-418A 2 BASEFRAME AY, FWD EXIT TPL AD 1
–325AB 882470-405A 2 BASEFRAME AY, EXIT TPL AE 1
–325AC 882470-406A 2 BASEFRAME AY, EXIT TPL AF 1
–325AD 882469-419A 2 BASEFRAME AY, EXIT AFT TPL AG 1
–325AE 882469-420A 2 BASEFRAME AY, EXIT AFT TPL AH 1
330 878313-443A 3 BAR AY, BAGGAGE 1
(U/O 882469-401,-403,-405, -407,
-417)
–330A 878313-444A 3 BAR AY, BAGGAGE 1
(U/O 882469-402,-404,-406, -408,
-418)
–330B 878313-445A 3 BAR AY, BAGGAGE, NAR 1
(U/O 882470-401, -405, 882469-
419)
–330C 878313-446A 3 BAR AY, BAGGAGE, NAR 1
(U/O 882470-402, -406, 882469-
420)
–330D 878313-447A 3 BAR AY, BAGGAGE, NAR 1
(U/O 882470-403, 882471-403)
–330E 878313-448A 3 BAR AY, BAGGAGE, NAR 1
(U/O 882470-404, 882471-404)
–330F 878313-449A 3 BAR AY, BAGGAGE, AFT 1
(U/O 882471-401)
–330G 878313-450A 3 BAR AY, BAGGAGE, AFT 1
(U/O 882471-402)
–330H 878313-451A 3 BAR AY, BAGGAGE 1
(U/O 882469-409,-411,-413,-415)
–330J 878313-452A 3 BAR AY, BAGGAGE 1
(U/O 882469-410,-412,-414,-416)
ATTACHING PARTS
–335 NAS623-3-44 3 SCREW (INBD) 1
–340 NAS1149F0332P 3 WASHER (INBD) 2
–345 MS21042-3 3 NUT (INBD) 1
–350 NAS6204-8 3 BOLT (ATTACHES BAGGAGE BAR 2
TO LEG)
–355 NAS1515H4L 3 WASHER (ATTACHES BAGGAGE 2
BAR TO LEG)
---*---
–360 115121-001 4 PLUG 2
–365 877282-001 4 BAGGAGE BAR (U/O 878313-443, 1
-445, -447, -448, -451)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–365A 877282-002 4 BAGGAGE BAR (U/O 878313-444, 1
-446, -448, -450, -452)
–370 877208-025 4 SPLICE 1
–375 877208-021 4 SPLICE (U/O 878313-443, -445) 1
–375A 877208-022 4 SPLICE (U/O 878313-444, -446) 1
–375B 877208-027 4 SPLICE (U/O 878313-447, -449) 1
–375C 877208-028 4 SPLICE (U/O 878313-448, -450) 1
–375D 877208-031 4 SPLICE (U/O 878313-451) 1
–375E 877208-032 4 SPLICE (U/O 878313-452) 1
–380 878309-047 4 BAGGAGE BAR (U/O 878313-443) 1
–380A 878309-048 4 BAGGAGE BAR (U/O 878313-444) 1
–380B 878309-049 4 BAGGAGE BAR (U/O 878313-445) 1
–380C 878309-050 4 BAGGAGE BAR (U/O 878313-446) 1
–380D 878309-051 4 BAGGAGE BAR (U/O 878313-447) 1
–380E 878309-052 4 BAGGAGE BAR (U/O 878313-448) 1
–380F 878309-053 4 BAGGAGE BAR (U/O 878313-449) 1
–380G 878309-054 4 BAGGAGE BAR (U/O 878313-450) 1
–380H 878309-057 4 BAGGAGE BAR (U/O 878313-451) 1
–380J 878309-058 4 BAGGAGE BAR (U/O 878313-452) 1
–385 877208-019 4 SPLICE 1
–390 878308-013 4 BAGGAGE BAR (U/O 878313-443, 1
-445, -447, -449, -451)
–390A 878308-014 4 BAGGAGE BAR (U/O 878313-444, 1
-446, -448, -450, -452)
–395 WA5085-52320402 4 RIVET 10
(TRUE P/N: WA5085-5232-0402)
–400 872809-003 3 SUPPORT, BAG BAR (INBD) 1
–405 880155-001 3 SUPPORT, BAG BAR (OUTBD) 1
ATTACHING PARTS
–410 NAS6203-34 3 SCREW (TOP) 1
–410A NAS6203-16 3 SCREW (BTM) 1
–415 NAS1149F0332P 3 WASHER (2-TOP, 2-BTM) 4
–420 MS21042-3 3 NUT (1-TOP, 1-BTM) 2
---*---
–425 879290-005 3 PLACARD, EXIT, BTM 1
DIAPHRAGM (OUTBD)
(U/O 882469-405, -406, -407,
-408, -413, -414, -415, -416)
(REPLD BY ITEM 425A)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–425A 879290-011 3 PLACARD, EXIT, BTM 1
DIAPHRAGM (OUTBD)
(U/O 882469-405, -406, -407,
-408, -413, -414, -415, -416)
(REPLS ITEM 425)
ATTACHING PARTS
–430 WA5086-12110403 3 RIVET 4
(TRUE P/N: WA5086-1211-0403)
–431 WA5499-128-100 3 WASHER 4
---*---
435 869254-487 3 DIAPHRAGM AY (INBD) 1
(U/O 882469-401, -403, -405, -407,
-409, -411, -417, -419, 882470-
401, -405) (REPLD BY ITEM 435X
FOR 882469-405, -407)
–435A 869254-488 3 DIAPHRAGM AY (INBD) 1
(U/O 882469-402, -404, -406, -408,
-410, -412, -418, -420, 882470-
402, -406) (REPLD BY ITEM 435Y
FOR 882469-406, -408)
–435B 869254-485 3 DIAPHRAGM AY (INBD) 1
(U/O 882470-403, 882471-403)
–435C 869254-486 3 DIAPHRAGM AY (INBD) 1
(U/O 882470-404, 882471-404)
–435D 869254-467 3 DIAPHRAGM AY (INBD) 1
(U/O 882471-401)
–435E 869254-468 3 DIAPHRAGM AY (INBD) 1
(U/O 882471-402)
435F 869254-465 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882469-401, -403, -409, -411,
-417)
–435G 869254-466 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882469-402, -404, -410, -412
-418)
–435H 869254-473 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882469-405,-407,-413,-415)
–435J 869254-474 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882469-406,-408,-414,-416)
–435K 869254-451 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882470-401) (REPLD BY
ITEM 435AB)
–435L 869254-452 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882470-402) (REPLD BY
435AC)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–435M 869254-469 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882470-403, 882471-403)
–435N 869254-470 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882470-404, 882471-404)
–435P 869254-471 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882471-401)
–435Q 869254-472 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882471-402)
435R 869254-483 3 DIAPHRAGM AY (CTR) 1
(U/O 882469-401, -403, -405,
-407, -409, -411, -417, -419,
882470-401, -405) (REPLD BY
ITEM 435Z FOR 882469-405,
-407)
–435S 869254-484 3 DIAPHRAGM AY (CTR) 1
(U/O 882469-402, -404, -406,
-408, -410, -412, -418, -420,
882470-402, -406) (REPLD BY
ITEM 435AA FOR 882469-406,
-408)
–435T 869254-489 3 DIAPHRAGM AY (CTR) 1
(U/O 882470-403, 882471-403)
–435U 869254-490 3 DIAPHRAGM AY (CTR) 1
(U/O 882470-404, 882471-404)
–435V 869254-491 3 DIAPHRAGM AY (CTR) 1
(U/O 882471-401)
–435W 869254-492 3 DIAPHRAGM AY (CTR) 1
(U/O 882471-402)
–435X 869254-493 3 DIAPHRAGM AY (INBD) 1
(U/O 882469-405, -407, -413,
-415) (REPLS ITEM 435 FOR
882469-405, -407)
–435Y 869254-494 3 DIAPHRAGM AY (INBD) 1
(U/O 882469-406, -408, -414,
-416) (REPLS ITEM 435A FOR
882469-406, -408)
–435Z 869254-495 3 DIAPHRAGM AY (CTR) 1
(U/O 882469-405, -407 -413, -415)
(REPLS ITEM 435R FOR 882469-
405, -407)
–435AA 869254-496 3 DIAPHRAGM AY (CTR) 1
(U/O 882469-406, -408 -414, -416)
(REPLS ITEM 435S FOR 882469-
406, -408)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–435AB 869254-497 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882469-419, 882470-401,
-405) (REPLS ITEM 435K FOR
882470-401)
–435AC 869254-498 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882469-420, 882470-402
-406) (REPLS ITEM 435L FOR
882470-402)
ATTACHING PARTS
–440 WA5088-52120603 3 RIVET (INBD) (3-FWD, 3-AFT) 6
(TRUE P/N: WA5088-5212-0603)
(U/O 882469-401 THRU -416,
882470-401, -402, -403, -404,
-417, -418, -419, -420 882471-403,
-404)
–440A WA5088-52120603 3 RIVET (INBD) (3-FWD, 2-AFT) 5
(TRUE P/N: WA5088-5212-0603)
(U/O 882470-405, -406, 882471-
401, -402)
–440B WA5088-52120603 3 RIVET (OUTBD) (3-FWD, 2-AFT) 5
(TRUE P/N: WA5088-5212-0603)
(U/O 882469-401 THRU -418,
882470-401 THRU -406,
882471-403, -404)
–440C WA5088-52120603 3 RIVET (LH OUTBD) (FWD) 2
(TRUE P/N: WA5088-5212-0603)
(U/O 882471-401, -402)
–440D WA5088-52120603 3 RIVET (CTR) (2-FWD, 2-AFT) 4
(TRUE P/N: WA5088-5212-0603)
(U/O 882469-401 THRU -408,
882470-401 THRU -404)
–440E WA5088-52120603 3 RIVET (CTR) (FWD) 2
(TRUE P/N: WA5088-5212-0603)
(U/O 882469-417 THRU -420,
882470-405, -406, 882471-401
THRU
-404)
–445 WA5088-52120604 3 RIVET (LH INBD) (FWD) 1
(TRUE P/N: WA5088-5212-0604)
(U/O 882469-401 THRU -416,
882470-401 THRU -404,
882471-403, -404)
–445A WA5088-52120604 3 RIVET (LH INBD) (1-FWD, 1-AFT) 2
(TRUE P/N: WA5088-5212-0604)
(U/O 882469-417, -418, 882470-
405, -406, 882471-401, -402)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–445B WA5088-52120604 3 RIVET (RH OUTBD)(1-FWD, 1-AFT) 2
(TRUE P/N: WA5088-5212-0604)
(U/O 882469-401 THRU -418,
882470-401, -402)
–445C WA5088-52120604 3 RIVET (RH OUTBD)(2-FWD, 1-AFT) 3
(TRUE P/N: WA5088-5212-0604)
(U/O 882470-403, -404,
882471-403, -404)
–445D WA5088-52120604 3 RIVET (OUTBD) (3- FWD & 3-AFT) 6
(TRUE P/N: WA5088-5212-0604)
(U/O 882470-403, -404)
–445E WA5088-52120604 3 RIVET (CTR) (1-RH FWD, 1-LH 5
FWD, 3-AFT)
(TRUE P/N: WA5088-5212-0604)
–445F WA5088-52120604 3 RIVET (CTR) (2-FWD, 3-AFT) 5
(TRUE P/N: WA5088-5212-0604)
(U/O 882469-417, -418, 882470-
405, -406)
–445G WA5088-52120604 3 RIVET (OUTBD) (1-FWD, 1-AFT) 2
(TRUE P/N: WA5088-5212-0604)
(U/O 882469-419, -420, 882470-
405, -406)
---*---
450 872807-403 3 RECLINE LOCK, SOURCE 3
ATTACHING PARTS
455 AN316-6R 3 NUT (ATTACHES LOCK TO PIN) 2
460 MS35333-42 3 WASHER (ATTACHES LOCK TO 2
PIN)
465 NAS6204-11 3 BOLT (ATTACHES LOCK TO 1
QUADRANT ARM)
(U/O 882469-401 THRU -404, -407
THRU -412, -415 THRU -420,
882470-401 THRU -406, 882471-
401 THRU
-404)
–465A NAS6204-15 3 BOLT (ATTACHES LOCK TO 1
QUADRANT ARM)
(U/O 882469-405, -406, 413, -414)
470 NAS1149F0416P 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
(U/O U/O 882469-401 THRU -404,
-407 THRU -412, -417, -418,
882470-401 THRU -406,882471-
401 THRU -404)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–470A NAS1149D0432J 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
(U/O 882469-405, -406, 413 THRU
-416)
475 NAS1515H4L 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
480 MS21042-4 3 NUT (ATTACHES LOCK TO 1
QUADRANT ARM)
–481 NAS75-4-006 3 BUSHING (ATTACHES LOCK TO 1
QUADRANT ARM)
(U/O 882469-405, -406, 413, -414)
---*---
485 869224-001 3 PIN, HYDROLOK (OUTBD & CTR) 2
(U/O 882469-401 THRU -404,
-407 THRU -412, 882470-401
THRU -404,882471-403, -404)
–485A 869224-003 3 PIN, HYDROLOK (INBD) 1
(U/O 882469-401 THRU -416,
882470-401 THRU -404,
882471-403, -404)
–485B 869224-001 3 PIN, HYDROLOK 3
(U/O 882471-401, -402)
–485C 869224-005 3 PIN, HYDROLOK (OUTBD) 1
(U/O 882469-405, -406, -413
THRU -416)
–485D 869224-001 3 PIN, HYDROLOK (CTR) 4
(U/O 8882469-405, -406, -413
THRU -416)
ATTACHING PARTS
490 NAS561P5-10 3 PIN 1
---*---
–491 869317-401 3 SUPPORT AY 3
(U/O 882469--405 THRU -408, 413
THRU -416)
ATTACHING PARTS
–492 NAS6204-16 3 BOLT (U/O 882469-405, -406, -413, 1
-414)
–492A NAS6204-13 3 BOLT (U/O 882469-407, -408, -415, 1
-416)
–493 NAS1149D0432J 3 WASHER 2
–493A NAS1515H4L 3 WASHER 2
–494 NAS75-4-006 3 BUSHING (U/O 882469-413, -414) 1
–494A MS21042-4 3 NUT (U/O 882469-415, -416) 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
---*---
495 881194-428A 3 BACK AY (INBD & CTR) 2
(U/O 882469-401, -407, -409, -417
882470-401, -405)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495AB FOR
882469-407)
–495A 881194-427A 3 BACK AY (INBD & CTR) 2
(U/O 882469-402, -408, -410, -420
882470-402, -406)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495AC FOR
882469-408)
–495B 881194-431A 3 BACK AY (INBD & CTR) 2
(U/O 882469-403, -405)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495V FOR
882469-403) (REPLD BY ITEM
495A FOR 882469-405)
–495C 881194-432A 3 BACK AY (INBD & CTR) 2
(U/O 882469-404, -406)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY 495W FOR 882469-
404) (REPLD BY ITEM 495AA
FOR 882469-406)
–495D 881194-416A 3 BACK AY (INBD & CTR) 2
(U/O 882470-403)
(SEE IPL FIG. 6 FOR DETS)
–495E 881194-415A 3 BACK AY (INBD & CTR) 2
(U/O 882470-404)
(SEE IPL FIG. 6 FOR DETS)
–495F 881194-420 3 BACK AY (INBD) 1
(U/O 882471-401)
(SEE IPL FIG. 6 FOR DETS)
–495G 881194-419 3 BACK AY (INBD) 1
(U/O 882471-402)
(SEE IPL FIG. 6 FOR DETS)
–495H 881194-434 3 BACK AY (INBD & CTR) 2
(U/O 882471-403)
(SEE IPL FIG. 6 FOR DETS)
–495J 881194-433 3 BACK AY (INBD & CTR) 2
(U/O 882471-404)
(SEE IPL FIG. 6 FOR DETS)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–495K 881194-427A 3 BACK AY (OUTBD) 1
(U/O 882469-401, -407, -409)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495AB FOR
882469-407)
–495L 881194-428A 3 BACK AY (OUTBD) 1
(U/O 882469-402, -408, -410)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495AC FOR
882469-408)
–495M 881194-429A 3 BACK AY (OUTBD) 1
(U/O 882469-403, -405)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495Z FOR
882469-405)
–495N 881194-430A 3 BACK AY (OUTBD) 1
(U/O 882469-404, -406)
(SEE IPL FIG. 6 FOR DETS)
(REPLD BY ITEM 495AA FOR
882469-406)
–495P 881194-415A 3 BACK AY (OUTBD) 1
(U/O 882470-401, -403)
(SEE IPL FIG. 6 FOR DETS)
–495Q 881194-416A 3 BACK AY (OUTBD) 1
(U/O 882470-402, -404)
(SEE IPL FIG. 6 FOR DETS)
–495R 881194-419 3 BACK AY (OUTBD & CTR) 2
(U/O 882471-401)
(SEE IPL FIG. 6 FOR DETS)
–495S 881194-420 3 BACK AY (OUTBD & CTR) 2
(U/O 882471-402)
(SEE IPL FIG. 6 FOR DETS)
–495T 881194-433 3 BACK AY (OUTBD) 1
(U/O 882469-419, 882470-405,
882471-403)
(SEE IPL FIG. 6 FOR DETS)
–495U 881194-434 3 BACK AY (OUTBD) 1
(U/O 882469-420, 882470-406,
882471-404)
(SEE IPL FIG. 6 FOR DETS)
–495V 881194-437A 3 BACK AY (INBD & CTR) 2
(U/O 882469-403, -411)
(SEE IPL FIG. 6 FOR DETS)
(REPLS 495B FOR 882469-403)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–495W 881194-438A 3 BACK AY (INBD & CTR) 2
(U/O 882469-404, -412)
(SEE IPL FIG. 6 FOR DETS)
(REPLS 495C FOR 882469-404)
–495X 881194-439A 3 BACK AY (OUTBD) 1
(U/O 882469-411)
(SEE IPL FIG. 6 FOR DETS)
–495Y 881194-440A 3 BACK AY (OUTBD) 1
(U/O 882469-412)
(SEE IPL FIG. 6 FOR DETS)
–495Z 881194-429A 3 BACK AY (U/O 882469-405, -413) 3
(SEE IPL FIG. 6 FOR DETS)
(REPLS ITEMS 495B & 495M FOR
882469-405)
–495AA 881194-430A 3 BACK AY (U/O 882469-406, -414) 3
(SEE IPL FIG. 6 FOR DETS)
(REPLS ITEMS 495C & 495N FOR
882469-406)
–495AB 881194-431A 3 BACK AY (U/O 882469-407, -415) 3
(SEE IPL FIG. 6 FOR DETS)
(REPLS ITEMS 495 & 495K FOR
882469-407)
–495AC 881194-432A 3 BACK AY (U/O 882469--408, -416) 3
(SEE IPL FIG. 6 FOR DETS)
(REPLS ITEMS 495A & 495L FOR
882469-408)
–495AD 881194-435 3 BACK AY (U/O 882469-417) 1
(OUTBD) (SEE IPL FIG. 6 FOR
DETS)
–495AE 881194-436 3 BACK AY (U/O 882469-418) 1
(OUTBD) (SEE IPL FIG. 6 FOR
DETS)
–495AF 881194-435 3 BACK AY (U/O 882469-420) (INBD 2
& CTR) (SEE IPL FIG. 6 FOR
DETS)
–495AG 881194-436 3 BACK AY (U/O 882469-419) (INBD 2
& CTR) (SEE IPL FIG. 6 FOR
DETS)
ATTACHING PARTS
500 NAS6604-1 3 BOLT 2
505 5710-62-60 3 WASHER (V86928) 2
---*---
–510 867664-007 3 BRACKET, EXIT 1
(U/O 882469-405 THRU -408, 413
THRU -416)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
ATTACHING PARTS
–511 NAS6604-17 3 BOLT 2
–512 NAS1149F0416P 3 WASHER 4
–513 42NKE048 3 NUT (V019L2) 2
(TRUE P/N: 42NKE-048)
–514 874975-005 3 SPACER 4
---*---
515 873276-001 3 SPACER, BACK 6
–516 877124-403 3 TUBE AY, TORQUE 3
(U/O 882469--405, -406, 413,
-414)
520 878299-405B 3 LEG AY, STD 2
(SEE IPL FIG. 7 FOR DETS)
525 882196-405A 3 SPREADER AY (OUTBD) 1
(U/O 882469-401, -403, -409, -411,
-417, -419, 882470-401-403, -405,
882471-401, -403) (SEE IPL FIG. 8
FOR DETS)
–525A 882196-406A 3 SPREADER AY (OUTBD) 1
(U/O 882469-402, -404, -410, -412,
-418, -420, 882470-402, -404, -
406, 882471-402, -404) (SEE IPL
FIG. 8 FOR DETS)
–525B 873286-401A 3 SPREADER AY (OUTBD) 1
(U/O 882469-405, -407) (REPLD
BY ITEM 525D)
(SEE IPL FIG. 8 FOR DETS)
–525C 873286-402A 3 SPREADER AY (OUTBD) 1
(U/O 882469-406, -408) (REPLD
BY ITEM 525E)
(SEE IPL FIG. 8 FOR DETS)
–525D 882196-411A 3 SPREADER AY (OUTBD) 1
(U/O 882469-405, -407, -413,
-415)
(SEE IPL FIG. 8 FOR DETS)
(REPLS ITEM 525B FOR 882469-
405, -407)
–525E 882196-412A 3 SPREADER AY (OUTBD) 1
(U/O 882469-406, -408, -414,
-416)
(SEE IPL FIG. 8 FOR DETS)
(REPLS ITEM 525C FOR 882469-
406, -408)
ATTACHING PARTS
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
530 NAS517-3-2 3 SCREW (FWD) 1
530A NAS517-3-3 3 SCREW (AFT) 1
535 NAS1515H3L 3 WASHER 2
540 MS21042-3 3 NUT 2
---*---
545 882132-405A 3 SPREADER AY (INBD) 1
(U/O 882469-401, -403, -405, -407,
-409, -411, -417, -419, 882470-
401, -403, -405, 882471-401, -403)
(SEE IPL FIG. 8 FOR DETS)
(REPLD BY ITEM 545B FOR
882469-405, -407)
–545A 882132-406A 3 SPREADER AY (INBD) 1
(U/O 882469-402, -404, -406, -408,
-410, -412, -418,-420, 882470-404,
-406, 882471-402, -404)
(SEE IPL FIG. 8 FOR DETS)
(REPLD BY ITEM 545C FOR
882469-406, -408)
–545B 882132-407A 3 SPREADER AY (INBD) 1
(U/O 882469-405, -407, -413,
-415) (SEE IPL FIG. 8 FOR DETS)
(REPLS ITEM 545 FOR 882469-
405, -407) (REPLD BY ITEM 550G
FOR 882469-407)
–545C 882132-408A 3 SPREADER AY (INBD) 1
(U/O 882469-406, -408, -414,
-416) (SEE IPL FIG. 8 FOR DETS)
(REPLS ITEM 545A FOR 882469-
406, -408) (REPLD BY ITEM 550H
FOR 882469-408)
550 882194-403A 3 SPREADER AY (OUTBD CTR) 1
(U/O 882469-401 THRU -412,
882469-417 THRU -420 882470-
401 THRU -406, 882471-403, -
404) (SEE IPL FIG. 9 FOR DETS)
(REPLD BY ITEM 550D FOR
882469-407, -408)
550A 874616-419A 3 SPREADER AY (INBD CTR) 1
(U/O 882469-401, -403, -405, -407,
-409, -411, -417, -419, 882470-
401,-403, -405, 882471-403)
(SEE IPL FIG. 9 FOR DETS)
(REPLD BY ITEM 550E FOR
882469-405)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–550B 874616-420A 3 SPREADER AY (INBD CTR) 1
(U/O 882469-402, -404, -406, -408,
-410, -412, -418, -420, 882470-
402, -404, -406, 882471-404)
(SEE IPL FIG. 9 FOR DETS)
(REPLD BY ITEM 550F FOR
882469-406)
–550C 882194-403A 3 SPREADER AY (CTR) 2
(U/O 882471-401, -402)
(SEE IPL FIG. 9 FOR DETS)
–550D 882194-411A 3 SPREADER AY (OUTBD CTR) 1
(U/O 882469-407, -408, -415,
-416) (SEE IPL FIG. 9 FOR DETS)
(REPLS ITEM 550 FOR 882469-
407, -408)
–550E 874616-421A 3 SPREADER AY (INBD CTR) 1
(U/O 882469-405, -413)
(SEE IPL FIG. 9 FOR DETS)
(REPLS ITEM 550A FOR 882469-
405)
–550F 874616-422A 3 SPREADER AY (INBD CTR) 1
(U/O 882469-406, -414)
(SEE IPL FIG. 9 FOR DETS)
(REPLS ITEM 550B FOR 882469-
406)
–550G 874616-427A 3 SPREADER AY (INBD CTR) 1
(U/O 882469-407, -415)
(SEE IPL FIG. 9 FOR DETS)
(REPLS ITEM 545B FOR 882469-
407)
–550H 874616-428A 3 SPREADER AY (INBD CTR) 1
(U/O 882469-408, -416)
(SEE IPL FIG. 9 FOR DETS)
(REPLS ITEM 545C FOR 882469-
408)
555 882245-417 3 TUBE AY, STD (FWD) 1
(U/O 882469-401,-403,-405,-407,
-417)
–555A 882245-418 3 TUBE AY, STD (FWD) 1
(U/O 882469-402,-404,-406,-408,
-418)
–555B 882245-421 3 TUBE AY, STD (FWD) 1
(U/O 882469-419, 882470-401,
-405)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2
–555C 882245-422 3 TUBE AY, STD (FWD) 1
(U/O 882469-420, 882470-402, -
406)
–555D 882245-425 3 TUBE AY, STD (FWD) 1
(U/O 882470-403, 882471-403)
–555E 882245-426 3 TUBE AY, STD (FWD) 1
(U/O 882470-404, 882471-404)
–555F 882245-429 3 TUBE AY, STD (FWD) 1
(U/O 882471-401)
–555G 882245-430 3 TUBE AY, STD (FWD) 1
(U/O 882471-402)
–555H 882245-433 3 TUBE AY, STD (FWD) 1
(U/O 882469-409,-411,-413, -415)
–555J 882245-434 3 TUBE AY, STD (FWD) 1
(U/O 882469-410,-412,-414, -416)
560 882245-419 3 TUBE AY, STD (AFT) 1
(U/O 882469-401,-403,-405,-407,
-417)
–560A 882245-420 3 TUBE AY, STD (AFT) 1
(U/O 882469-402,-404,-406,-408,
-419)
–560B 882245-423 3 TUBE AY, STD (AFT) 1
(U/O 882469-419, 882470-401,
-405)
–560C 882245-424 3 TUBE AY, STD (AFT) 1
(U/O 882469-420, 882470-402,
-406)
–560D 882245-427 3 TUBE AY, STD (AFT) 1
(U/O 882470-403, 882471-403)
–560E 882245-428 3 TUBE AY, STD (AFT) 1
(U/O 882470-404, 881271-404)
–560F 882245-431 3 TUBE AY, STD (AFT) 1
(U/O 882471-401)
–560G 882245-432 3 TUBE AY, STD (AFT) 1
(U/O 882471-402)
–560H 882245-435 3 TUBE AY, STD (AFT) 1
(U/O 882469-409,-411,-413, -415)
–560J 882245-436 3 TUBE AY, STD (AFT) 1
(U/O 882469-410,-412,-414, -416)
85
25 D
25 E
110D
240B
20 15
10
A
45
882157-431 SHOWN
A 545
550
435
C
525
435D
560
30
520A
330
555
520
495
515
505
500
465
490 470
475 470
550 475
480
(REF)
C
485 450
455
460
455
D INBD
95 110B
115
120
240 235
100
250
545
(REF)
245
250
245
E CTR
110F
95
115
120
235A
100
550
(REF)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–1 882157-431 0 SEAT AY, MODEL Z100 T/C, LH A RF
STD DBL, AFT, NRW, 4" RECL
–1A 882157-432 0 SEAT AY, MODEL Z100 T/C, RH B RF
STD DBL, AFT, NRW, 4" RECL
–1B 882157-433 0 SEAT AY, MODEL Z100 T/C, LH C RF
STD DBL, AFT, 4” RECL
–1C 882157-434 0 SEAT AY, MODEL Z100 T/C, RH D RF
STD DBL, AFT, 4” RECL
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
45 880971-405A 2 POUCH AY, LIFE VEST 2
–50 NOT USED
THRU
–80 NOT USED
85 882545-405A 2 CUSHION AY, BACK W/DRESS A,B 2
(HEARTSTONE)
–85A 882545-405B 2 CUSHION AY, BACK W/DRESS A,B RF
(SOUTHERN BELLE)
–85B 882545-411A 2 CUSHION AY, BACK W/DRESS C,D 2
(HEARTSTONE)
–85C 882545-411B 2 CUSHION AY, BACK W/DRESS C,D RF
(SOUTHERN BELLE)
90 NOT USED
95 878424-403D 2 ARMCAP AY 3
ATTACHING PARTS
100 NAS1351-3-8 2 SCREW (FWD) 1
–105 NAS1351-3-12 2 SCREW (AFT) 1
---*---
110 877848-417C 2 ARMREST AY (CTR) A,C 1
–110A 877848-418C 2 ARMREST AY (CTR) B,D 1
110B 877848-435C 2 ARMREST AY (INBD) A,C 1
–110C 877848-436C 2 ARMREST AY (INBD) B,D 1
110D 877848-441C 2 ARMREST AY (OUTBD) A,C 1
–110E 877848-442C 2 ARMREST AY (OUTBD) B,D 1
ATTACHING PARTS
115 NAS1351-3-10P 2 SCREW 1
120 882665-001 2 WASHER 1
---*---
–125 877468-029 3 ARMREST CORE 1
–130 878280-019C 3 ARMREST BODY 1
(U/O 877848-417)
–130A 878280-020C 3 ARMREST BODY 1
(U/O 877848-418)
–130B 878280-013C 3 ARMREST BODY 1
(U/O 877848-435)
–130C 878280-014C 3 ARMREST BODY 1
(U/O 877848-436)
–130D 878280-021D 3 ARMREST BODY 1
(U/O 877848-441)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–130E 878280-022D 3 ARMREST BODY 1
(U/O 877848-442)
–135 877470-407 3 ARMREST AY 1
–140 880791-401 3 HOUSING AY 1
(U/O 877848-435, -436)
–145 880793-401A 3 PIVOT BLOCK AY 1
(U/O 877848-421, -422)
–145A 880793-403A 3 PIVOT BLOCK AY 1
(U/O 877848-417, -418)
–145B 880793-405 3 PIVOT BLOCK AY 1
(U/O 877848-435, -436, -443,
-444)
–150 880795-001 3 PIN, MACHINED 1
(U/O 877848-435, -436, -441,
-442)
–150A 880795-003 3 PIN, MACHINED 1
(U/O 877848-435, -436)
–150B 880795-005 3 PIN, MACHINED 1
(U/O 877848-417, -418, -441,
-442)
–155 NAS6204-18 3 BOLT 1
–160 NAS1352-08-6P 3 SCREW 3
–165 NAS514P440-4P 3 SCREW (U/O 877848-435, -436) 2
–170 NAS1149F0432P 3 WASHER 2
–175 MS21042-4 3 NUT 1
–180 873000-007 3 BUSHING 2
–185 LC029C01S 3 SPRING (V1A699) 1
(TRUE P/N: LC-029C-01-S)
(U/O 877848-435, -436)
–189 886181-001 2 SHIM - ARMREST PIVOT BLOCK 2
(CTR) (POST SB 886184-25-5084)
–189A 886181-003 2 SHIM - ARMREST PIVOT BLOCK 4
(INBD & OUTBD) (POST SB
886184-25-5084)
–190 NOT USED
THRU
–210 NOT USED
–215 MS25281F5 2 “P” CLAMP A,B 4
(TRUE P/N: MS25281-F5)
–215A MS25281F3 2 “P” CLAMP C,D 4
(TRUE P/N: MS25281-F3)
ATTACHING PARTS
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–220 NAS1352-08-6P 2 SCREW 1
–225 NAS620-8L 2 WASHER 1
---*---
–230 MS3367-5-9 2 STRAP (WA5047-220-200) 3
(ATTACHES RECL CABLE TO
DIAPHRAGM) (REPLD BY ITEM
230A)
–230A MS3367-2-9 2 STRAP (WA5047-264-201) 3
(ATTACHES RECL CABLE TO
DIAPHRAGM) (REPLS ITEM 230)
235 873661-407 2 RECLINE CABLE AY, 43 INCH A,B 1
(INBD)
235A 873661-401 2 RECLINE CABLE AY, 32 INCH A,B 1
(CTR)
235B 873661-407 2 RECLINE CABLE AY, 43 INCH C,D 2
240 873563-033B 2 BUMPER, STD (INBD) (REPLD BY A 1
ITEM 240F)
–240A 873563-034B 2 BUMPER, STD (INBD) (REPLD BY B 1
ITEM 240G)
240B 873563-032B 2 BUMPER, STD (OUTBD) A 1
–240C 873563-031B 2 BUMPER, STD (OUTBD) B 1
240D 873563-037C 2 BUMPER, STD (INBD) C 1
–240E 873563-038C 2 BUMPER, STD (INBD) D 1
–240F 873563-049A 2 BUMPER, STD (INBD) (REPLS A 1
ITEM 240)
–240G 873563-050A 2 BUMPER, STD (INBD) (REPLS B 1
ITEM 240A)
ATTACHING PARTS
245 NAS603-14P 2 SCREW 2
250 NAS1149D0316J 2 WASHER 2
---*---
–255 WA9658-2000-102 2 TAPE-HOOK, 2.0 INCH (BEIGE) A-P AR
(AFT TUBE) U-AB
–260 857126-025 2 CLOSURE, RECLINE LOCK A,B 2
–260A 857126-025 2 CLOSURE, RECLINE LOCK C,D 1
ATTACHING PARTS
–265 MS3367-2-9 2 STRAP, NYLN (WA5047-264-201) AR
---*---
–270 NOT USED
THRU
–320 NOT USED
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–325 882946-401A 2 BASEFRAME AY, FWD EXIT DBL A 1
–325A 882946-402A 2 BASEFRAME AY, FWD EXIT DBL B 1
–325B 882946-403A 2 BASEFRAME AY, AFT DBL C 1
–325C 882946-404A 2 BASEFRAME AY, AFT DBL D 1
330 873555-479A 3 BAR AY, BAGGAGE 1
(U/O 882946-401)
–330A 873555-480A 3 BAR AY, BAGGAGE 1
(U/O 882946-402)
–330B 878313-455A 3 BAR AY, BAGGAGE 1
(U/O 882946-403)
–330C 878313-456A 3 BAR AY, BAGGAGE 1
(U/O 882946-404)
ATTACHING PARTS
–335 NAS623-3-14 3 SCREW (U/O 882946-401, -402) 1
–335A NAS623-3-44 3 SCREW (U/O 882946-403, -404) 1
–340 NAS1149D0332J 3 WASHER (U/O 882946-401, -402) 1
–340A NAS1149F0332P 3 WASHER (U/O 882946-403, -404) 2
–345 MS21042-3 3 NUT (U/O 882946-403, -404) 1
–350 NAS6204-8 3 BOLT (OUTBD) (ATTACHES BAG 1
BAR TO LEG) (U/O 882946-403, -
404)
–355 NAS1515H4L 3 WASHER (OUTBD) (ATTACHES 1
BAG BAR TO LEG) (U/O 882946-
403, -404)
---*---
–360 115121-001 4 PLUG 2
–365 873557-085 4 BAGGAGE BAR (U/O 873555-479, 1
-480)
–365A 873556-008 4 BAGGAGE BAR (U/O 873555-479) 1
–365B 873556-007 4 BAGGAGE BAR (U/O 873555-480) 1
–370 873558-005 4 SPLICE 1
ATTACHING PARTS
–375 WA5088-52320403 4 RIVET (TRUE P/N WA5088-5232- 4
0403)
---*---
–380 878308-013 4 BAGGAGE BAR (U/O 878313-455) 1
–380A 878308-014 4 BAGGAGE BAR (U/O 878313-456) 1
–380B 878309-061 4 BAGGAGE BAR (U/O 878313-455) 1
–380C 878309-062 4 BAGGAGE BAR (U/O 878313-456) 1
–385 877208-025 4 SPLICE (U/O 878313-455, -456) 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
ATTACHING PARTS
–390 WA5085-52320402 4 RIVET (TRUE P/N WA5085-5232- 4
0402)
---*---
–395 877208-035 4 SPLICE (U/O 878313-455, -456) 1
–395A 877208-019 4 SPLICE (U/O 878313-455, -456) 1
ATTACHING PARTS
–400 WA5085-52320402 4 RIVET (TRUE P/N WA5085-5232- 2
0402)
---*---
–405 872809-001 3 SUPPORT, BAG BAR A,B 1
–405A 872809-003 3 SUPPORT, BAG BAR C,D 1
–410 NOT USED
THRU
–430 NOT USED
435 869254-703 3 DIAPHRAGM AY (INBD) 1
(U/O 882946-401)
–435A 869254-704 3 DIAPHRAGM AY (INBD) 1
(U/O 882946-402)
–435B 869254-487 3 DIAPHRAGM AY (INBD) 1
(U/O 882946-403)
–435C 869254-488 3 DIAPHRAGM AY (INBD) 1
(U/O 882946-404)
435D 869254-491 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882946-401)
–435E 869254-492 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882946-402)
435F 869254-483 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882946-403)
–435G 869254-484 3 DIAPHRAGM AY (OUTBD) 1
(U/O 882946-404)
ATTACHING PARTS
–440 WA5088-52120603 3 RIVET (INBD) (2-FWD, 2-AFT) 4
(TRUE P/N: WA5088-5212-0603)
(U/O 882946-401, -402)
–440A WA5088-52120603 3 RIVET (OUTBD) (3-FWD, 3-AFT) 6
(TRUE P/N: WA5088-5212-0603)
(U/O 882946-401, -402)
–440B WA5088-52120603 3 RIVET (INBD) (3-FWD, 2-AFT) 5
(TRUE P/N: WA5088-5212-0603)
(U/O 882946-403, -404)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–440C WA5088-52120603 3 RIVET (OUTBD) (3-FW) 3
(TRUE P/N: WA5088-5212-0603)
(U/O 882946-403, -404)
–445 WA5088-52120604 3 RIVET (INBD) (2-FWD, 1-AFT) 3
(TRUE P/N: WA5088-52120-604)
(U/O 882946-401, -402)
–445A WA5088-52120604 3 RIVET (OUTBD) (FWD) 1
(TRUE P/N: WA5088-52120-604)
(U/O 882946-401, -402)
–445B WA5088-52120604 3 RIVET (INBD) (1-FWD, 1-AFT) 2
(TRUE P/N: WA5088-5212-0604)
(U/O 882946-403, -404)
–445C WA5088-52120604 3 RIVET (OUTBD) (1-FWD, 3-AFT) 4
(TRUE P/N: WA5088-52120-604)
(U/O 882946-403, -404)
---*---
450 872807-403 3 RECLINE LOCK, SOURCE 3
ATTACHING PARTS
455 AN316-6R 3 NUT (ATTACHES LOCK TO PIN) 2
460 MS35333-42 3 WASHER (ATTACHES LOCK TO 2
PIN)
465 NAS6204-11 3 BOLT (ATTACHES LOCK TO 1
QUADRANT ARM)
470 NAS1149F0416P 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
475 NAS1515H4L 3 WASHER (ATTACHES LOCK TO 2
QUADRANT ARM)
480 MS21042-4 3 NUT (ATTACHES LOCK TO 1
QUADRANT ARM)
---*---
485 869224-001 3 PIN, HYDROLOK 2
(U/O 882946-401, -402)
–485A 869224-003 3 PIN, HYDROLOK (CTR) 1
(U/O 882946-403, -404)
–485B 869224-001 3 PIN, HYDROLOK (OUTBD) 1
(U/O 88946-403, -404)
ATTACHING PARTS
490 NAS561P5-10 3 PIN 1
---*---
495 881194-420 3 BACK AY (INBD) 1
(U/O 882946-401)
(SEE IPL FIG. 6 FOR DETS)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–495A 881194-419 3 BACK AY (INBD) 1
(U/O 882946-402)
(SEE IPL FIG. 6 FOR DETS)
–495B 881194-419 3 BACK AY (OUTBD) 1
(U/O 882946-401)
(SEE IPL FIG. 6 FOR DETS)
–495C 881194-420 3 BACK AY (OUTBD) 1
(U/O 882946-402)
(SEE IPL FIG. 6 FOR DETS)
–495D 881194-436 3 BACK AY (U/O 882946-403) (SEE 2
IPL FIG. 6 FOR DETS)
–495E 881194-435 3 BACK AY (U/O 882946-404) 2
(SEE IPL FIG. 6 FOR DETS)
ATTACHING PARTS
500 NAS6604-1 3 BOLT 2
505 5710-62-60 3 WASHER (V86928) 2
---*---
–510 NOT USED
515 873276-001 3 SPACER, BACK 4
520 874699-413A 3 LEG AY, STD (OUTBD) (U/O 1
882946-401, -402)
(SEE IPL FIG. 7 FOR DETS)
520A 874619-413A 3 LEG AY, STD (INBD) (U/O 882946- 1
401)
(SEE IPL FIG. 7 FOR DETS)
–520B 874619-414A 3 LEG AY, STD (INBD) (U/O 882946- 1
402)
(SEE IPL FIG. 7 FOR DETS)
–520C 878299-405B 3 LEG AY, STD (U/O 882946-403, 2
-404) (SEE IPL FIG. 7 FOR DETS)
–525 882132-406A 3 SPREADER AY (OUTBD) 1
(U/O 882946-401) (SEE IPL FIG. 8
FOR DETS)
–525A 882132-405A 3 SPREADER AY (OUTBD) 1
(U/O 882946-402) (SEE IPL FIG. 8
FOR DETS)
–525B 882132-408A 3 SPREADER AY (OUTBD) 1
(U/O 882946-403) (SEE IPL FIG. 8
FOR DETS)
–525C 882132-407A 3 SPREADER AY (OUTBD) 1
(U/O 882946-404) (SEE IPL FIG. 8
FOR DETS)
ATTACHING PARTS
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
2A
–530 NAS517-3-2 3 SCREW (U/O 882946-403, -404) 1
(FWD)
–530A NAS517-3-3 3 SCREW (U/O 882946-403, -404) 1
(AFT)
–535 NAS1515H3L 3 WASHER 2
–540 MS21042-3 3 NUT 2
---*---
545 882132-405A 3 SPREADER AY (INBD) 1
(U/O 882946-401, 403)
(SEE IPL FIG. 8 FOR DETS)
–545A 882132-406A 3 SPREADER AY (INBD) 1
(U/O 882946-402, -404)
(SEE IPL FIG. 8 FOR DETS)
550 882194-403A 3 SPREADER AY (CTR) 1
(U/O 882946-401, -402)
(SEE IPL FIG. 9 FOR DETS)
–550A 874616-419A 3 SPREADER AY (CTR) 1
(U/O 882946-403)
(SEE IPL FIG. 9 FOR DETS)
–550B 874616-420A 3 SPREADER AY (CTR) 1
(U/O 882946-404)
(SEE IPL FIG. 9 FOR DETS)
555 878572-441 3 TUBE AY (FWD) (U/O 882946-401) 1
–555A 878572-442 3 TUBE AY (FWD) (U/O 882946-402) 1
–555B 878572-445 3 TUBE AY (FWD) (U/O 882946-403) 1
–555C 878572-446 3 TUBE AY (FWD) (U/O 882946-404) 1
560 878572-443 3 TUBE AY (AFT) (U/O 882946-401) 1
–560A 878572-444 3 TUBE AY (AFT) (U/O 882946-402) 1
–560B 878572-447 3 TUBE AY (AFT) (U/O 882946-403) 1
–560C 878572-448 3 TUBE AY (AFT) (U/O 882946-404) 1
30 35
35A
30B 25
50
25A 30A
(REF)
A 75
85
80
B
55
70
65
65
65
60
65
60A
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
3
–1 869348-437A 0 FOOD TABLE AY (AFT-MOUNTED) A RF
(SEE IPL FIGS. 1 & 2 FOR NHA)
–1A 869348-439A 0 FOOD TABLE AY (AFT-MOUNTED) B RF
(SEE IPL FIG. 2 FOR NHA)
–1B 869348-449A 0 FOOD TABLE AY (AFT-MOUNTED) C RF
(SEE IPL FIGS. 1 & 2 FOR NHA)
–1C 869348-447A 0 FOOD TABLE AY (AFT-MOUNTED) D RF
(SEE IPL FIG. 1A FOR NHA)
–1D 869348-445A 0 FOOD TABLE AY (AFT-MOUNTED) E RF
(SEE IPL FIG. 2 FOR NHA)
–5 NOT USED
THRU
–15 NOT USED
–20 878319-405A 1 ARM AY, TRAY 1
–20A 878319-406A 1 ARM AY, TRAY 1
25 NAS1081-06A3 2 SETSCREW 1
25A NAS1081-06A4 2 SETSCREW 1
30 MS21209F1-20 2 INSERT 1
30A MS21209C0615 2 INSERT 1
30B MS21209C0610 2 INSERT 1
35 878318-005A 2 ARM (U/O 878319-405) 1
35A 878318-006A 2 ARM (U/O 878319-406) 1
–40 NOT USED
THRU
–45 NOT USED
50 869366-433A 1 TABLE AY A 1
–50A 869366-435A 1 TABLE AY B 1
–50B 869366-445A 1 TABLE AY C 1
–50C 869366-443A 1 TABLE AY D 1
–50D 869366-441A 1 TABLE AY E 1
55 880681-411 2 HEATSINK AY (U/O 869366-433) 1
–55A 880681-407 2 HEATSINK AY (U/O 869366-435) 1
–55B 880681-417 2 HEATSINK AY (U/O 869366-445) 1
–55C 880681-415 2 HEATSINK AY (U/O 869366-443) 1
–55D 880681-413 2 HEATSINK AY (U/O 869366-441) 1
60 878321-407 3 PIVOT BLOCK AY, AFT TRAY 1
(REPLD BY ITEM 60B)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
3
60A 878321-408 3 PIVOT BLOCK AY, AFT TRAY 1
(REPLD BY ITEM 60C)
–60B 878321-409 3 PIVOT BLOCK AY, AFT TRAY 1
(REPLS ITEM 60)
–60C 878321-410 3 PIVOT BLOCK AY, AFT TRAY 1
(REPLS ITEM 60A)
ATTACHING PARTS
65 WA5085-22310402 3 RIVET 4
(TRUE P/N: WA5085-2231-0402)
---*---
70 880684-011 3 HEATSINK (U/O 880681-411) 1
–70A 880684-007 3 HEATSINK (U/O 880681-407) 1
–70B 880684-017 3 HEATSINK (U/O 880681-417) 1
–70C 880684-015 3 HEATSINK (U/O 880681-415) 1
–70D 880684-013 3 HEATSINK (U/O 880681-413) 1
75 880680-011 2 FOAM (U/O 869366-433) 1
–75A 880680-017 2 FOAM (U/O 869366-435) 1
–75B 880680-023 2 FOAM (U/O 869366-445) 1
–75C 880680-021 2 FOAM (U/O 869366-443) 1
–75D 880680-019 2 FOAM (U/O 869366-441) 1
80 869374-023A 2 TABLE, TRAY (TOP) 1
(U/O 869366-433)
–80A 869374-019A 2 TABLE, TRAY (TOP) 1
(U/O 869366-435)
–80B 869374-033A 2 TABLE, TRAY (TOP) 1
(U/O 869366-445)
–80C 869374-031A 2 TABLE, TRAY (TOP) 1
(U/O 869366-443)
–80D 869374-029A 2 TABLE, TRAY (TOP) 1
(U/O 869366-441)
85 869375-031A 2 TABLE, TRAY (BTM) 1
(U/O 869366-433)
–85A 869375-037A 2 TABLE, TRAY (BTM) 1
(U/O 869366-435)
–85B 869375-047A 2 TABLE, TRAY (BTM) 1
(U/O 869366-445)
–85C 869375-045A 2 TABLE, TRAY (BTM) 1
(U/O 869366-443)
–85D 869375-043A 2 TABLE, TRAY (BTM) 1
(U/O 869366-441)
75
100
70
75
70 95
80
75
80
75
85A 90
35 85
85A 90
85 90A
25 85
10
85
20 50
5
25 30
(REF) 15
15
858805-739 SHOWN
ROTATED 55 60
65
55
40
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
4
–1 858805-739B 0 FOOD TABLE AY, IAT A RF
(SEE IPL FIG. 1 FOR NHA)
–1A 858805-740B 0 FOOD TABLE AY, IAT B RF
(SEE IPL FIG. 1 FOR NHA)
–1B 858805-747A 0 FOOD TABLE AY, IAT C RF
(SEE IPL FIG. 1A FOR NHA)
–1C 858805-748A 0 FOOD TABLE AY, IAT D RF
(SEE IPL FIG. 1A FOR NHA)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
4
---*---
80 859526-001 1 TRACK 2
ATTACHING PARTS
85 NAS514P1032-5 1 SCREW 2
85A NAS514P1032-4 1 SCREW 1
---*---
90 857455-015 1 PLATE, STOP 2
90A 857455-009 1 PLATE, STOP 2
95 858807-415C 1 FOOD LEAF AY, IAT A 1
–95A 858807-416C 1 FOOD LEAF AY, IAT B 1
–95B 858807-427A 1 FOOD LEAF AY, IAT C 1
–95C 858807-428A 1 FOOD LEAF AY, IAT D 1
100 858806-401AW 1 FOOD TABLE AY A 1
–100A 858806-402BA 1 FOOD TABLE AY B 1
15
10
A
100
5
20 75
20
80
105
20
80
20
80
80
90
100
95
50
65 55
25
70
30
45
40
60
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
5
–1 877918-415B 0 ARMREST AY, IAT (SEE IPL FIGS. A RF
1 & 1A FOR NHA)
–1A 877918-416B 0 ARMREST AY, IAT (SEE IPL FIGS. B RF
1 & 1A FOR NHA)
–1B 877918-417A 0 ARMREST AY, IAT (SEE IPL FIGS. C RF
1 & 1A FOR NHA)
–1C 877918-418A 0 ARMREST AY, IAT (SEE IPL FIGS. D RF
1 & 1A FOR NHA)
–1D 877918-415E 0 ARMREST AY, IAT (SEE IPL FIGS. E RF
1 & 1A FOR NHA)
–1E 877918-416E 0 ARMREST AY, IAT (SEE IPL FIG. 1 F RF
FOR NHA)
–1F 877918-417B 0 ARMREST AY, IAT (SEE IPL FIG. 1 G RF
FOR NHA)
–1G 877918-418B 0 ARMREST AY, IAT (SEE IPL FIG. 1 H RF
FOR NHA)
5 875028-405A 1 ESCUTCHEON AY 1
ATTACHING PARTS
10 NAS514P832-10 1 SCREW 2
---*---
15 869563-407A 1 ARMCAP AY A-D 1
–15A 869563-407H 1 ARMCAP AY E-H 1
ATTACHING PARTS
20 NAS514P832-4 1 SCREW 4
---*---
25 877920-001 2 BRACKET 1
ATTACHING PARTS
30 NAS514P832-4P 2 SCREW 4
---*---
–35 869567-403A 2 HINGE AY, ARMCAP 1
40 869570-005 3 PIN-HINGE (SWAGED) 1
45 859749-003 3 SPRING-HINGE 1
50 F832-1 3 NUT, FASTENER (V46384) 4
(TRUE P/N: F-832-1)
55 872849-003A 3 HINGE-UPPER 1
60 869566-005A 3 HINGE-LOWER 1
65 877919-001A 2 ARMCAP (U/O 869563-407A) 1
–65A 877919-001G 2 ARMCAP (U/O 869563-407H) 1
70 872846-003 2 ARMCAP 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
5
75 869566-003C 1 HINGE-LOWER 1
ATTACHING PARTS
80 NAS514P832-4 1 SCREW 4
---*---
–85 NOT USED
90 421M 1 BUMPER (V98893) 1
95 877916-411B 1 STRUCTURE AY A,E 1
–95A 877916-412B 1 STRUCTURE AY B,F 1
–95B 877916-413A 1 STRUCTURE AY C,G 1
–95C 877916-414A 1 STRUCTURE AY D,H 1
100 NAS561P6-16 1 PIN, ROLL 2
105 877914-412B 1 STRUCTURE AY A,E 1
–105A 877914-411B 1 STRUCTURE AY B,F 1
–105B 877914-414A 1 STRUCTURE AY C,G 1
–105C 877914-413A 1 STRUCTURE AY D,H 1
–110 WA9659-2000-112 1 TAPE-LOOP, 2.0 INCH (BEIGE) AR
–110A WA9659-500-106 1 TAPE-LOOP, 0.5 INCH (BEIGE) AR
–110B WA9659-750-111 1 TAPE-LOOP, 0.75 INCH (BEIGE) AR
170
105
190
25
15
20
40
60
45
100
25
20A 30
50
55 5
75 15
70 10
65
80
90 85 15A 10
80
95
881194-415 BACK AY
BACK ASSEMBLY
IPL FIGURE 6 (SHEET 1 OF 2)
160
155
125
140
140 145
150
165
120
135
130
BACK ASSEMBLY
IPL FIGURE 6 (SHEET 2 OF 2)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
6
–1 881194-415A 0 BACK AY A RF
(SEE IPL FIG. 2 FOR NHA)
–1A 881194-416A 0 BACK AY B RF
(SEE IPL FIG. 2 FOR NHA)
–1B 881194-419 0 BACK AY C RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
–1C 881194-420 0 BACK AY D RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
–1D 881194-427A 0 BACK AY E RF
(SEE IPL FIGS. 1 & 2 FOR NHA)
–1E 881194-428A 0 BACK AY F RF
(SEE IPL FIGS. 1 & 2 FOR NHA)
–1F 881194-429A 0 BACK AY G RF
(SEE IPL FIG. 2 FOR NHA)
–1G 881194-430A 0 BACK AY H RF
(SEE IPL FIG. 2 FOR NHA)
–1H 881194-431A 0 BACK AY J RF
(SEE IPL FIG. 2 FOR NHA)
–1J 881194-432A 0 BACK AY K RF
(SEE IPL FIG. 2 FOR NHA)
–1K 881194-433 0 BACK AY L RF
(SEE IPL FIG. 2 FOR NHA)
–1L 881194-434 0 BACK AY M RF
(SEE IPL FIG. 2 FOR NHA)
–1M 881194-437A 0 BACK AY N RF
(SEE IPL FIG. 2 FOR NHA)
–1N 881194-438A 0 BACK AY P RF
(SEE IPL FIG. 2 FOR NHA)
–1P 881194-439A 0 BACK AY Q RF
(SEE IPL FIG. 2 FOR NHA)
–1Q 881194-440A 0 BACK AY R RF
(SEE IPL FIG. 2 FOR NHA)
–1R 881194-417A 0 BACK AY S RF
(SEE IPL FIG. 1A FOR NHA)
–1S 881194-418A 0 BACK AY T RF
(SEE IPL FIG. 1A FOR NHA)
–1T 881194-435 0 BACK AY U RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
–1U 881194-436 0 BACK AY V RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
6
–5A 874989-001 1 SPRING, LIT POCKET E-K, 1
N-R
–5B 874989-023 1 SPRING, LIT POCKET S,T 1
ATTACHING PARTS
10 NAS517-3-12 1 SCREW 4
15 NAS1169-10 1 WASHER-DIMPLED (UPPER) 4
15A NAS1169-10 1 WASHER-DIMPLED (LOWER) 2
20 NAS1149D0332J 1 WASHER (UPPER) 4
20A NAS1149D0332J 1 WASHER (LOWER) 2
25 MS21042-3 1 NUT 4
---*---
30 MS25281F3 1 “P” CLAMP A,B, 2
(TRUE P/N: MS25281-F3) E-K,
N-T
–35 869496-447 1 QUADRANT AY, ARM (REPLD BY A,C,E, 1
ITEM 35B FOR EFF. J & K) G,K,L,
P,Q,S,
U
–35A 869496-448 1 QUADRANT AY, ARM (REPLD BY B,D,F, 1
ITEM 35C FOR EFF. J & K) H,J,M,
N,R,T,V
–35B 869496-445 1 QUADRANT AY, ARM (REPLS J,K 1
ITEM 35 FOR EFF. J & K) (REPLD
BY ITEM 35D)
–35C 869496-446 1 QUADRANT AY, ARM (REPLS J,K 1
ITEM 35A FOR EFF. J & K)
(REPLD BY ITEM 35D)
–35D 869496-469 1 QUADRANT AY, ARM (REPLS J,K 2
ITEMS 35B & 35C)
ATTACHING PARTS
40 NAS6204-23 1 BOLT 1
45 5710-84-40 1 WASHER (V86928) 1
50 NAS1149D0432J 1 WASHER 1
55 NAS43HT4-26 1 SPACER 1
–55A 880786-001 1 SPACER J,K 1
60 NAS77-4-085 1 BUSHING 1
65 MS21042-4 1 NUT 1
---*---
70 869905-005 2 PLATE, QUADRANT (U/O 869496- 1
447, -448)
–70A 869905-021 2 PLATE, QUADRANT (U/O 869496- 1
445, -446)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
6
ATTACHING PARTS
75 NAS517-3-2 2 SCREW (U/O 869496-447, -448) 2
–75A NAS517-3-3 2 SCREW (U/O 869496-445, -446) 2
80 NAS1149F0332P 2 WASHER 4
85 MS21042-3 2 NUT 2
---*---
90 NAS75-4-006 2 BUSHING 1
95 869904-023 2 QUADRANT (U/O 869496-445, 1
-447)
–95A 869904-024 2 QUADRANT (U/O 869496-446, 1
-448)
–95B 869904-027 2 QUADRANT (U/O 869496-469) 1
100 NAS77-11-100 1 BUSHING 2
105 879523-407B 1 MOUNT AY, FOOD TABLE LATCH A,B,E,F 1
,S,T
–105A 879523-405B 1 MOUNT AY, FOOD TABLE LATCH G,J,N,Q 1
(REPLD BY ITEM 105C FOR EFF.
J)
–105B 879523-406B 1 MOUNT AY, FOOD TABLE LATCH H,K,P,R 1
(REPLD BY ITEM 105D FOR EFF.
K)
–105C 879523-409A 1 MOUNT AY, FOOD TABLE LATCH J 1
(REPLS ITEM 105A FOR EFF. J)
–105D 879523-410A 1 MOUNT AY, FOOD TABLE LATCH K 1
(REPLS ITEM 105B FOR EFF. K)
ATTACHING PARTS
–110 WA5085-52120408 1 DELETED D
–110A WA5088-52120402 1 RIVET (TOP) 4
(TRUE P/N: WA5088-5212-0402)
–110B WA5088-52120408 1 RIVET (BTM) 3
(TRUE P/N: WA5088-5212-0408)
–115 WA5499-128-101 1 WASHER (BTM) 3
---*---
120 882089-001C 2 ESCUTCHEON 1
125 882261-001 2 ESCUTCHEON (U/O 879523-407) 1
–125A 882261-003 2 ESCUTCHEON (U/O 879523-405) 1
–125B 882261-004 2 ESCUTCHEON (U/O 879523-406) 1
ATTACHING PARTS
130 NAS623-2-16 2 SCREW 2
---*---
135 882176-401B 2 LATCH AY, HANDLE 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
6
ATTACHING PARTS
140 NAS620C416L 2 WASHER 2
145 LC042F01S 2 SPRING (V1A699) 1
(TRUE P/N: LC-042F-01-S)
150 MS16556-5 2 PIN 1
---*---
155 882260-011 2 BRACKET, LATCH 1
160 MS21075L08N 2 NUT PLATE 2
ATTACHING PARTS
165 WA5085-22310302 2 RIVET 2
(TRUE P/N: WA5085-2231-0302)
---*---
170 872747-105 1 DIAPHRAGM, BACK A,B 1
–170A 872747-107 1 DIAPHRAGM, BACK C,D,L, 1
M,S,T
–170B 872747-111 1 DIAPHRAGM, BACK E-K, 1
N-R,
U,V
ATTACHING PARTS
–175 WA5085-22110402 1 RIVET 19
(TRUE P/N: WA5085-2211-0402)
–180 WA5499-128-101 1 WASHER (BTM) 6
---*---
–185 WA9658-2000-102 1 TAPE-HOOK, 2.0 INCH (BEIGE) AR
–185A WA9658-1000-101 1 TAPE-HOOK, 1.0 INCH (BEIGE) A,B, AR
(REPLS ITEM 185B) E-K,
N-T
–185B WA9658-1500-100 1 TAPE-HOOK, 1.5 INCH (BEIGE) A,B, AR
(REPLD BY ITEM 185A) E-K
–185C WA9658-500-105 1 TAPE-HOOK, 0.5 INCH (BEIGE) C,D,L, AR
M,U,V
–185D WA9659-2000-112 1 TAPE-LOOP, 2.0 INCH (BEIGE) A,B, AR
E-K,
N-T
–185E WA9659-1000-112 1 TAPE-LOOP, 1.0 INCH (BEIGE) AR
(REPLD BY ITEM 185F)
–185F WA9656-109-100 1 TAPE-DOUBLED COATED, 1.0 AR
INCH (REPLS ITEM 185E)
190 882248-001 1 BACK, STD A,B,L, 1
M
–190A 882248-005 1 BACK, STD C,D,S, 1
T
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
6
–190B 882248-003 1 BACK, STD E-K, 1
N-R,
U,V
–195 882794-001 1 FOAM (BND) A,B,L, 2
M
–195A 882794-003 1 FOAM (BND) C,D,S, 2
T
–195B 882794-005 1 FOAM (BND) E-K, 2
U,V
130
125
110
140 105
125
120B
125 95
120
130 115
125 105
100
25A
25
20A
20 30
20A
15
60
55 40
20
35
10
50
35
LEG ASSEMBLY
IPL FIGURE 7 (SHEET 1 OF 2)
130
125
110A
105A
140A
125
120B
125 95A
120A
130 115A
125 105A
100A
25B
25
20B
20 30A
20B
15A
45
60A
55 35A
20
35A
10
50
35A
LEG ASSEMBLY
IPL FIGURE 7 (SHEET 2 OF 2)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
7
–1 878301-405B 0 LEG AY, F/R A RF
(SEE IPL FIG. 1 FOR NHA)
–1A 878299-405B 0 LEG AY, STD B RF
(SEE IPL FIG. 2 FOR NHA)
–1B 874619-413A 0 LEG AY, OFS STD C RF
(SEE IPL FIGS. 1A & 2A FOR
NHA)
–1C 874619-414A 0 LEG AY, OFS STD D RF
(SEE IPL FIGS. 1A & 2A FOR
NHA)
–1D 874699-413A 0 LEG AY, STD E RF
(SEE IPL FIGS. 1A & 2A FOR
NHA)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
7
55 869674-001 2 BUSHING 1
60 874945-401A 2 BASE AY 1
(U/O 8874944-401)
60A 874948-403A 2 BASE AY 1
(U/O 874947-403)
–65 874946-001A 3 BASE, MACHINED (U/O 874945- 1
401)
–65A 874949-003A 3 BASE, MACHINED (U/O 874947- 1
403)
–70 MS21209F5-15 3 INSERT 3
---*---
–75 AN565B8H4 1 SETSCREW C,D,E 1
–80 NOT USED
THRU
–90 NOT USED
95 873220-001A 1 STRUT, F/R A 1
95A 869659-401A 1 STRUT AY B,C,D, 1
E
ATTACHING PARTS
100 NAS6205-18 1 BOLT A 1
100A NAS6604-15 1 BOLT B,C,D, 1
E
105 NAS1149F0532P 1 WASHER A 2
105A NAS1149F0432P 1 WASHER B,C,D, 2
E
110 42NKE054 1 NUT (V019L2) A 1
(TRUE P/N: 42NKE-054)
110A 42NKE048 1 NUT (V019L2) B,C,D, 1
(TRUE P/N: 42NKE-048) E
---*---
115 869660-005 1 BUSHING A 1
115A 869661-003 1 BUSHING B,C,D, 1
E
120 NAS6605-18 1 BOLT (FWD) A 1
120A NAS6605-16 1 BOLT (FWD) B,C,D, 1
E
120B NAS6605-17 1 BOLT (AFT) A,B 1
–120C NAS6605-16 1 BOLT (AFT) C,D 1
–120D NAS6605-22 1 BOLT (AFT) E 1
125 NAS1149F0516P 1 WASHER (2-FWD, 2-AFT) 4
130 MS21042-5 1 NUT (1-FWD, 1-AFT) 2
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
7
–135 MS21209F4-10 1 INSERT (FWD) A,B 1
140 878300-003B 1 LEG, F/R A 1
140A 882129-001A 1 LEG, STD B 1
–140B 874620-005A 1 LEG, OFS C,D 1
–140C 873218-009A 1 LEG, STD E 1
–145 874621-003A 1 MOUNT, OFS (FWD) C,D 1
–145A 874622-003 1 MOUNT, OFS (AFT) C,D 1
ATTACHING PARTS
–150 NAS6205-22 1 BOLT 3
–155 NAS1149D0532J 1 WASHER 6
–160 116558-003 1 SUPPORT 3
–165 42NKE054 1 NUT (TRUE P/N 42NKE-054) 3
---*---
200
80 185
205
215 195
70
230 190
230
70 70
80 225
225
75
170
65
15 20
225 150
180 145
165 175
220
220
210 150
5
25 145
15
10
55 145
30 140
45 145
50
140
35
40
80
70A
200
185
205
195
80
190
75
65
20
15
150 170
180
165
175
5
25
15
150 10A
235
55
30
45 50
240
35
40
105 115
110
215C
85
95
75
80A
55
70A
30 80A
45 50
60
35
65A
40
100
220
225
10
15 5 225
230
25 15
20
210B
150
145
150
145
245
145
145
140
873286-401 CANTED SPREADER ASSEMBLY
140
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
8
–1 882196-407A 0 SPREADER AY, SIDE A RF
(SEE IPL FIG. 1 FOR NHA)
–1A 882196-408A 0 SPREADER AY, SIDE B RF
(SEE IPL FIG. 1 FOR NHA)
–1B 882196-405A 0 SPREADER AY, SIDE C RF
(SEE IPL FIG. 2 FOR NHA)
–1C 882196-406A 0 SPREADER AY, SIDE D RF
(SEE IPL FIG. 2 FOR NHA)
–1D 873227-445A 0 SPREADER AY, F/R, SIDE E RF
(SEE IPL FIG. 1 FOR NHA)
–1E 873227-446A 0 SPREADER AY, F/R, SIDE F RF
(SEE IPL FIG. 1 FOR NHA)
–1F 873286-401A 0 SPREADER AY, SIDE G RF
(SEE IPL FIG. 2 FOR NHA)
–1G 873286-402A 0 SPREADER AY, SIDE H RF
(SEE IPL FIG. 2 FOR NHA)
–1H 882132-405A 0 SPREADER AY, SIDE J RF
(SEE IPL FIGS. 1, 1A, 2, 2A FOR
NHA)
–1J 882132-406A 0 SPREADER AY, SIDE K RF
(SEE IPL FIGS. 1, 1A, 2, 2A FOR
NHA)
–1K 882196-411A 0 SPREADER AY, SIDE L RF
(SEE IPL FIG. 2 FOR NHA)
–1L 882196-412A 0 SPREADER AY, SIDE M RF
(SEE IPL FIG. 2 FOR NHA)
–1M 882132-407A 0 SPREADER AY, SIDE N RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
–1N 882132-408A 0 SPREADER AY, SIDE P RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
–1P 873227-457A 0 SPREADER AY, SIDE Q RF
(SEE IPL FIG. 1A FOR NHA)
–1Q 873227-458A 0 SPREADER AY, SIDE R RF
(SEE IPL FIG. 1A FOR NHA)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
8
15 NAS1149F0432P 1 WASHER 2
20 MS21042-4 1 NUT 1
---*---
25 NAS43DD4-10 1 SPACER 1
30 869691-003 2 SWIVEL LIMITER, SEAT BELT 1
35 869690-003 2 LINK, SEAT BELT 1
ATTACHING PARTS
40 NAS623-4-5 2 SCREW 1
45 5710-58-30 2 WASHER (V86928) 1
50 NAS43HT4-14 2 SPACER 1
55 MS21042-4 2 NUT 1
---*---
60 869699-401 1 SUPPORT AY, LIMITER C,D, 1
G-R
65 869697-005 1 PIN, TABLE STOP A,B,E, 1
F
65A 869697-003 1 PIN, TABLE STOP C,D,G, 1
H,J,K,
L,M,N,
P,Q,R
70 NAS1081-3A8L 1 SETSCREW A-D, 3
(PRE SB 886184-25-5084) J,K,N,
P
70A NAS1081-3A8L 1 SETSCREW E-H, 1
L,M,Q,
R
–70B NAS1081-3A8L 1 SETSCREW (BTM-AFT) A-D, 1
(POST SB 886184-25-5084) J,K,N,
P
–70C NAS1081-3A10L 1 SETSCREW (FWD & TOP-AFT) A-D, 2
(POST SB 886184-25-5084) J,K,N,
P
75 869685-403 1 SHAFT AY 1
80 NAS77-11-038 1 BUSHING A-F, 2
J,K,N,
P,Q,R
80A 861824-001 1 BUSHING G,H,L, 2
M
85 NAS1351-3-8P 1 SCREW, CAP G,H,L, 1
M
–90 NOT USED
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
8
95 873000-003 1 BUSHING G,H,L, 1
M
100 MS16562-64 1 PIN, ROLL G,H,L, 1
M
105 869696-011 1 LOCKOUT, MECHANISM G,H,L, 1
M
ATTACHING PARTS
110 NAS1351-3-12P 1 SCREW, CAP 1
---*---
115 LC042D2MW 1 SPRING (V1A699) G,H,L, 1
(TRUE P/N: LC-042D-2MW) M
–120 NOT USED
THRU
–135 NOT USED
140 NAS6604-11 1 BOLT (1-FWD, 1-AFT) A-D, 2
G-R
140A NAS6604-12 1 BOLT (FWD) E,F 1
140B NAS6604-13 1 BOLT (AFT) E,F 1
145 NAS1149F0416P 1 WASHER (2-FWD, 2-AFT) A-D, 4
G,H,L,
M
145A NAS1149F0432P 1 WASHER (2-FWD, 2-AFT) E,F,J, 4
K,N,P
150 MS21042-4 1 NUT (1-FWD, 1-AFT) 2
–155 NOT USED
THRU
–160 NOT USED
165 NAS1081-08A3 1 SETSCREW A,B,E, 1
F
170 NAS1149D0863J 1 WASHER A,B,E, 1
F
175 869688-401 1 COLLAR AY, RETENTION A,B,E, 1
F
180 869687-401 1 LINK AY, SWIVEL A,B,E, 1
F
185 869692-001 2 LINK, SWIVEL, Y-BELT 1
190 NAS623-4-5 2 SCREW 1
195 5710-58-30 2 WASHER (V86928) 1
200 NAS43HT4-14 2 SPACER 1
205 MS21042-4 2 NUT 1
210 882195-001A 1 SPREADER, OUTBD A,C,L 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
8
–210A 882195-002A 1 SPREADER, OUTBD B,D,M 1
210B 873233-002A 1 SPREADER, OUTBD G 1
–210C 873233-001A 1 SPREADER, OUTBD H 1
215 869022-005A 1 SPREADER, UPPER, CANTED A,C 1
–215A 869022-006A 1 SPREADER, UPPER, CANTED B,D 1
–215B 869022-001A 1 SPREADER, UPPER, CANTED H,L 1
215C 869022-002A 1 SPREADER, UPPER, CANTED G,M 1
ATTACHING PARTS
220 NAS6204-11 1 BOLT 2
225 NAS1149F0416P 1 WASHER 4
230 MS21042-4 1 NUT 2
---*---
235 873232-045A 1 SPREADER, F/R E,F 1
–235A 882131-001A 1 SPREADER, AISLE J,K,N, 1
P
–235B 873232-051A 1 SPREADER, AISLE Q,R 1
240 875580-001 1 PLUG E,F 1
245 869223-006 1 TRUNNION G 1
–245A 869223-005 1 TRUNNION H 1
–245B 869223-019 1 TRUNNION L 1
–245C 869223-020 1 TRUNNION M 1
–245D 869223-027 1 TRUNNION N,P 1
170
155
175
165 135 185
160 80
70
145 80
140
150
20 75
15
5
140
25
150
65
180 5
115
120 25
145 135
15
10
120
115
55
115 30
115 45 50
110A
35
110
40
80
70A
70A
60
70A
80 75
65A
20 15
5 25 60
25
5
180 15
185A 10
120
115A
55
120 30
115A 45 50
115A
35
40
115A
110D
882194-403 CENTER SPREADER ASSEMBLY
110D
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
9
–1 873228-443A 0 SPREADER AY, CENTER A RF
(SEE IPL FIG. 1 FOR NHA)
–1A 874616-417A 0 SPREADER AY, CENTER B RF
(SEE IPL FIG. 1 FOR NHA)
–1B 874616-418A 0 SPREADER AY, CENTER C RF
(SEE IPL FIG. 1 FOR NHA)
–1C 874616-419A 0 SPREADER AY, CENTER D RF
(SEE IPL FIGS. 1, 2 & 2A FOR
NHA)
–1D 874616-420A 0 SPREADER AY, CENTER E RF
(SEE IPL FIGS. 1, 2 & 2A FOR
NHA)
–1E 882194-403A 0 SPREADER AY, CENTER F RF
(SEE IPL FIGS. 2 & 2A FOR NHA)
–1F 882194-411A 0 SPREADER AY, CENTER G RF
(SEE IPL FIG. 2 FOR NHA)
–1G 874616-421A 0 SPREADER AY, CENTER H RF
(SEE IPL FIG. 2 FOR NHA)
–1H 874616-422A 0 SPREADER AY, CENTER J RF
(SEE IPL FIG. 2 FOR NHA)
–1J 874616-427A 0 SPREADER AY, CENTER K RF
(SEE IPL FIG. 2 FOR NHA)
–1K 874616-428A 0 SPREADER AY, CENTER L RF
(SEE IPL FIG. 2 FOR NHA)
–1L 873228-453A 0 SPREADER AY, CENTER M RF
(SEE IPL FIG. 1 FOR NHA)
–1M 873228-454A 0 SPREADER AY, CENTER N RF
(SEE IPL FIG. 1 FOR NHA)
–1N 873228-455A 0 SPREADER AY, CENTER P RF
(SEE IPL FIG. 1A FOR NHA)
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
9
15 NAS1149F0432P 1 WASHER 2
20 MS21042-4 1 NUT 1
---*---
25 NAS43DD4-10 1 SPACER A,F,G, 2
M,N,P
–25A NAS43DD4-10 1 SPACER B-E, 1
H-L
–25B 860683-011 1 SPACER B,C 1
–25C 860683-001 1 SPACER D,E, 1
H-L
30 869691-003 2 SWIVEL LIMITER, SEAT BELT 1
(U/O 869686-401)
–30A 869691-005 2 SWIVEL LIMITER, SEAT BELT 1
(U/O 869686-405)
35 869690-003 2 LINK, SEAT BELT 1
(U/O 869686-401)
–35A 869690-005 2 LINK, SEAT BELT 1
(U/O 869686-405)
ATTACHING PARTS
40 NAS623-4-5 2 SCREW 1
45 5710-58-30 2 WASHER (V86928) 1
50 NAS43HT4-14 2 SPACER 1
55 MS21042-4 2 NUT 1
---*---
60 869699-401 1 SUPPORT AY, LIMITER D-P 2
65 869697-007 1 PIN, TABLE STOP (REPLS ITEM A-C, 1
65B FOR EFF M & N) M,N
65A 869697-001 1 PIN, TABLE STOP D-L,P 1
–65B 869697-005 1 PIN, TABLE STOP (REPLD BY M,N 1
ITEM 65)
70 NAS1081-3A8L 1 SETSCREW A-C, 1
M,N,P
70A NAS1081-3A8L 1 SETSCREW D-L 3
(PRE SB 886184-25-5084)
–70B NAS1081-3A8L 1 SETSCREW (BTM-AFT) D-L 1
(POST SB 886184-25-5084)
–70C NAS1081-3A10L 1 SETSCREW (FWD & TOP-AFT) D-L 2
(POST SB 886184-25-5084)
75 869685-401 1 SHAFT AY 1
80 NAS77-11-038 1 BUSHING 2
–85 NOT USED
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
9
THRU
–105 NOT USED
110 NAS6604-12 1 BOLT (FWD) A-E, 1
H-L,
M,N
110A NAS6604-13 1 BOLT (AFT) A,H-L 1
M,N
–110B NAS6604-14 1 BOLT (AFT) B,C 1
–110C NAS6604-13 1 BOLT (AFT) D,E 1
110D NAS6604-11 1 BOLT (1-FWD, 1-AFT) F,G,P 2
115 NAS1149F0432P 1 WASHER (2-FWD, 2-AFT) A-E, 4
H-N
115A NAS1149F0416P 1 WASHER (2-FWD, 2-AFT) F,G,P 4
120 MS21042-4 1 NUT (1-FWD, 1-AFT) 2
–125 NOT USED
THRU
–130 NOT USED
135 NAS1081-08A3 1 SETSCREW A-C 2
–135A NAS1081-08A3 1 SETSCREW M,N 1
140 NAS1149D0863J 1 WASHER A-C, 2
M,N
145 869688-401 1 COLLAR AY, RETENTION A-C, 2
M,N
150 869687-401 1 LINK AY, SWIVEL A-C 2
–150A 869687-401 1 LINK AY, SWIVEL M,N 1
155 869692-001 2 LINK, SWIVEL, Y-BELT 1
160 NAS623-4-5 2 SCREW 1
165 5710-58-30 2 WASHER (V86928) 1
170 NAS43HT4-14 2 SPACER 1
175 MS21042-4 2 NUT 1
180 869223-023 1 TRUNNION, PIVOT A,F,G, 1
M,N,P
180A 869223-025 1 TRUNNION, PIVOT B-E 1
–180B 869223-029 1 TRUNNION, PIVOT H-L 1
185 873232-045A 1 SPREADER, F/R A,M,N 1
185A 873231-023A 1 SPREADER, STD F 1
–185B 873231-031A 1 SPREADER, STD G 1
–185C 873232-051A 1 SPREADER, STD P 1
–190 874617-017A 1 SPREADER, OFST STD B 1
–190A 874617-018A 1 SPREADER, OFST STD C 1
AIRLINE UNITS
INDENT
FIG PART EFF
PART NOMENCLATURE PER
ITEM NUMBER CODE
NO ASSY
9
–190B 874617-015A 1 SPREADER, OFST STD D,H 1
–190C 874617-016A 1 SPREADER, OFST STD E,J 1
–190D 874617-023A 1 SPREADER, OFST STD K 1
–190E 874617-024A 1 SPREADER, OFST STD L 1
–195 874618-013A 1 SPREADER, OFST STD B,D,H, 1
K
–195A 874618-014A 1 SPREADER, OFST STD C,E,J, 1
L
ATTACHING PARTS
–200 NAS6203-26 1 BOLT 2
–205 NAS1149D0332J 1 WASHER 4
–210 MS21042-3 1 NUT 2
---*---
–215 860683-003 1 SPACER B-E, 2
H-L
–220 866642-007A 1 ADAPTER B 1
–220A 866642-008A 1 ADAPTER C 1
ATTACHING PARTS
–225 NAS6203-10 1 BOLT 3
–230 NAS1149D0332J 1 WASHER 3
---*---
A. General.
B. Procedures.
(1) Wrap seat assembly in waterproof wrapping paper (Federal Specification PPP-B-
1055) or equivalent, or a plastic cover. Use tape (Federal Specification JAN-P-127)
or equivalent, to attach wrapping paper or cover.
(2) Identify seat assembly part number and date of overhaul on a tag, or in a
convenient location on the seat assembly wrapper.
(3) Store seat assembly (long term) in cool, dry place, away from sunlight and heat
source at a temperature range from 4.0°C to 32.0°C [39.2°F to 89.6°F]. The relative
humidity should not exceed 50%. These temperature-humidity conditions meet
requirements of current RTCA/DO-160 (Environmental Conditions and Test
Procedures for Airborne Equipment) to protect any sensitive electronic equipment,
and reduce any possible corrosion of metal parts and mildewing of upholstery
materials.