Professional Documents
Culture Documents
Switchboard Builder - Catalogue - Section E - Power Monitoring and Power Quality Correction - en
Switchboard Builder - Catalogue - Section E - Power Monitoring and Power Quality Correction - en
Switchboard Builder - Catalogue - Section E - Power Monitoring and Power Quality Correction - en
< >
se.com/au Life is On | Schneider Electric | E-1
Switchboard Manufacturers
PowerLogic™ range
Schneider Electric is the global specialist in energy management and as such it has the most complete
power motoring product line, going from simple indicators (analog meters) and CTs, to world class
accurate energy meters and powerful compact power meters. These proven products come with
multiple options to satisfy any requirement.
Schneider Electric products are safe and reliable. We comply with the most stringent standards,
including IEC, MID, UL, etc., and we thoroughly test all products with third-party laboratories. This gives
our partners the peace of mind and the confidence that they are maintaining a good reputation while
delivering the best value in equipment and service to their customers.
Our products are simple to install, configure, and use. This saves our partners time and money and lets
them deliver the best solutions in a timely and cost-effective manner.
< >
se.com/au Life is On | Schneider Electric | E-3
Switchboard Manufacturers
PowerLogic™ Range
General Overview
Installation Applications
i. Solid Core CTs
• Insulated Cable, Panel instrumentation
diameter 21 to 35 mm
Panel instrumentation I/U I/U I/U F hours/pulses
• busbar through
transformer
• cable connections Energy efficiency & cost
ii. Split Core CTs Sub-billing & cost
• CT installation without allocation
the need to uninstall
and reinstall power Demand & load
conductors management
• Cable and Busbar Billing analysis
connections
Revenue metering
Revenue meter
Characteristics Characteristics
i. Solid Core CTs Measurement accuracy Class 1.5 ± 0.5 % ± 1 digit Class 1.5 ± 0.5 % ± 1 digit
• transformation ratio: 40/5
A to 6000/5 A Installation DIN rail 4 x 18 DIN rail 2 x 18 flush mounted 72 DIN rail 2 x 18 iCI, iCH: DIN
mm modules mm modules x 72 mm mm modules rail 2 x 18 mm
• accuracy: class 0.5 to 3 96 x 96 mm modules CH: flush
• maximum rated opera- mount
tional voltage: 720 V AC
• tropicalised range 25 °C Measurement iAMP: 30 A direct iVLT: 600 V AC VLT: 500 V AC 400 V AC direct
to +60 °C (1) or external CT direct or external direct or external
VT VT AMP: external
relative humidity > 95 % CT
Warning: some
(1)
Communication ports
products are limited to
+50 °C. Inputs / Outputs
ii. Split Core CTs Memory capacity
• transformation ratio :
100/5A to 4000/5A
• accuracy : class 0.5 to 3
• maximum rated opera-
tional voltage : 720 V AC
• Cable connection : -5°C
to +50°C
General Overview
Panel instrumentation H
Panel instrumentation E I, U, F, P, Q, S, PF, E I, U, F, P, Q, S, PF, E
(Power demand and current (Power demand and current
demand) demand) I
Energy efficiency & cost
Sub-billing & cost allocation cost allocation
Demand & load management
Billing analysis
Revenue metering
Revenue meter
Characteristics
Measurement accuracy Class 0.5S / Class 1 Class 0.5S / Class 1 Class 0.5 IEC 61557-12 PMD/DD
Class 1 (active energy)
Installation DIN rail 1, 2, 5, or 7 x 18 mm DIN rail DIN rail on product or on cables de-
modules pending on the reference
Voltage measurement 400 V AC direct 50 V to 330 V (Ph-N) 50 V to 330 V AC (Ph-N) up to 277 V AC (Ph-N) / 480 V
80 V to 570 V (Ph-Ph) up to 80 V to 570 V AC (Ph-Ph) AC (Ph-Ph) depending on the
1MV AC (ext VT) up to 1M V AC (ext VT) reference
Current measurement 40 to 125 A direct or external external CT external CT 63 to 2000 A
CT
Communication ports 1 1 Wireless
Memory capacity
< >
se.com/au Life is On | Schneider Electric | E-5
Switchboard Manufacturers
PowerLogic™ Range
General Overview
Applications
Panel instrumentation
Panel instrumentation Analysis of gas and mi- I, U, F, P, Q, S, PF, E I, U, F, P, Q, S, PF, E
cro-particles, Temperature, (Power demand and (Power demand and
Humidity current demand) current demand)
Revenue metering
Revenue meter
Characteristics
Measurement accuracy Temperature ±-1.1 °C Hu- Class 0.5S Class 0.5
midity ± 9 RH%
Installation DIN rail DIN rail Flush mount or DIN rail Flush mount
6 x 18 mm modules 96 mm x 96 mm
Voltage measurement 60 V to 400 V AC L-N PM53xx 20-400 V L-N
103.5 to 690 V AC L-L 20-690 V L-L
Current measurement external CT external CT
Memory capacity
General Overview
Panel instrumentation H
Panel instrumentation I, U, F, P, Q, S, PF, E I, U, F, P, Q, S, PF, E I, U, F, P, Q, S, PF, E
(Power demand and current (Power demand and current (Power demand and current
demand) demand) demand)
I
Energy efficiency & cost
Sub-billing & cost allocation
Demand & load management
Billing analysis
Revenue metering
Revenue meter
Characteristics
Measurement accuracy Class 1 (mains active energy) Class 1 (mains active energy) Class 1 (mains active energy)
Voltage measurement 90 – 277 V L-Nvoltage Inputs 90 – 277 V L-Nvoltage Inputs UL: 90 V L-N to 600 V L-L;
CE: 90 V L-N to 300 V L
Current measurement CT strips for branch circuits CT strips for branch circuits EM35xxA models work exclu-
and external CTs for mains and external CTs for mains sively with Rogowski coil CTs
Communication ports 1 for main 1 for main 1 for main
Memory capacity
< >
se.com/au Life is On | Schneider Electric | E-7
Switchboard Manufacturers
Current Transformers
General Overview
Current transformers
Schneider Electric is the global specialist in energy management with the most complete
power monitoring product line. Current Transformers are essential components designed
to be used with Schneider Electric's extensive power monitoring product portfolio. From
simple energy meters to world class power quality meters, these proven products satisfy
any requirement.
E
IP/5 A ratio The Ip/5 A ratio current transformer delivers at the secondary a current (Is) of
A
0 to 5 A that is proportional to the current measured at the primary (Ip). This
allows them to be used in combination with measurement equipment:
B
• Ammeters. • Kilowatt-hour meters.
• Measurement units. • Control relays. etc.
C
When the primary is energized, the measurement equipment nearly acts as
a short circuit which keeps the secondary voltage very low. This voltage will
DB416186
DB415921 DB415987
MA MB MC
FF MD
MD VV
(1) Two secondary connectors (parallel internal wiring - only one secondary winding) for easier cable access. 1 lateral + 1 on one extremity. Warning: only one must be used at a time.
Specific mounting: use of cylinder CT with primary connection by screw and nut (example: use of cylinder with bar or cable)
DB416005 DB416006
NOTE: This document is not intended to be used as an installation guide.
< >
se.com/au Life is On | Schneider Electric | E-9
Switchboard Manufacturers
Current Transformers
Functions and characteristics
Copper cablecross-section Power per doubled meter at Schneider Electric device Consumption of the current
(mm2) 20°C (VA) input (VA)
1 1 Ammeter 72 x 72 / 96 x 96 1.1
10 0.0975 PM5000
16 0.062 iEM3000
For each temperature variation per 10 °C bracket, the power drawn up by the cables increases by 4 %.
Application example
Project specification: 200 A, in Ø27 mm cable, accuracy class 1. Our choice is METSECT5MA020.
For this CT selected on the chart (next page), the max acceptable power is 7 VA (for "Accuracy class 1" which is specified in the project).
MA
Ø27 10 x 32 150 METSECT5MA015 3 4
15 x 25 200 METSECT5MA020 4 7 -
250 METSECT5MA025 6 8 -
300 METSECT5MA030 8 10 -
400 METSECT5MA040 10 12 -
Reference numbers
R = Rogowski
MET SE CT R 30 500 = Rogowski CT, 300mm
length, 96mm diameter 50 A to 5000 A D
50 METSECT5CC005
60 METSECT5CC006
G
75 METSECT5CC008
100 METSECT5CC010 H
125 METSECT5CC013
METSECT5CCppp
150 METSECT5CC015
200 METSECT5CC020
I
250 METSECT5CC025
MA
FF MA Ø27 10 x 32 150 METSECT5MA015
15 x 25
PB112460
200 METSECT5MA020
250 METSECT5MA025
300 METSECT5MA030
METSECT5MAppp 400 METSECT5MA040
MC
FF MC Ø32 10 x 40 250 METSECT5MC025
20 x 32
PB112462
25 x 25 300 METSECT5MC030
400 METSECT5MC040
500 METSECT5MC050
600 METSECT5MC060
METSECT5MCppp 800 METSECT5MC080
MD
PB112463
< >
se.com/au Life is On | Schneider Electric | E-11
Switchboard Manufacturers
Current Transformers
Reference numbers
Common characteristics
DB415926
by tunnel terminals
by screws
PB112452
Max. power (VA) W x H x D (mm)
Reference Numbers
Type V - current transformers (vertical bar profile)
A
Internal profile Cables (mm) Bars (mm) Rating Ip/5 A (A) Commercial reference
type number
PB112467
VV
- 55 x 165 5000 METSECT5VV500 •
B
6000 METSECT5VV600 •
FF MB
C
METSECT5VVppp
D
Type D - current transformers (vertical or horizontal bar - dual secondary terminals)
E
Internal profile Cables (mm) Bars (mm) Rating Ip/5 A (A) Commercial reference
type number
DA
F
32 x 65 400 METSECT5DA040
500 METSECT5DA050
G
PB112455
600 METSECT5DA060
PB112454
800 METSECT5DA080
1000 METSECT5DA100 H
1250 METSECT5DA125 •
1250 METSECT5DB125 •
1500 METSECT5DB150 •
2000 METSECT5DB200 •
2500 METSECT5DB250 •
PB112457
PB112456
3000 METSECT5DB300 •
DC
- 52 x 127 2000 METSECT5DC200 •
2500 METSECT5DC250 •
METSECT5DCppp METSECT5DDppp
3000 METSECT5DC300 •
4000 METSECT5DC400 •
DD
- 34 x 84 1000 METSECT5DD100
1250 METSECT5DD125 •
1500 METSECT5DD150 •
DE
PB112459
PB112458
1250 METSECT5DE125 •
1500 METSECT5DE150 •
DH
- 38 x 102 1250 METSECT5DH125 •
1500 METSECT5DH150 •
2000 METSECT5DH200 •
• Operating temperature: -25 °C to 50 °C
See your Schneider Electric representative for complete ordering information.
< >
se.com/au Life is On | Schneider Electric | E-13
Switchboard Manufacturers
Current Transformers
Reference numbers
Type V - solid core current transformers (vertical bar profile)
Internal profile Accuracy Overall dimensions Fastening mode Accessories
type class (refer to drawing
0.5 1 3 pages for details) Cylinder Sealable cover
70 - -
E
Type D - solid core current transformers (vertical or horizontal bar - dual secondary terminals)
DA Dimension (mm)
4 8 - 90 x 94 x 90 • Insulated locking screw. Included
8 10 -
8 12 -
12 15 -
15 20 -
15 20 -
20 25 -
DB
6 10 - 99 x 160 x 87 • Insulated locking screw. - Included
8 12 -
10 15 -
15 20 -
20 25 -
25 30 -
DC
25 30 - 125 x 160 x 87 • Insulated locking screw. - Included
30 50 -
30 50 -
30 50 -
DD
10 15 - 96 x 116 x 87 • Insulated locking screw. - Included
12 15 -
15 20 -
DE
12 15 - 135 x 129 x 85 • Insulated locking screw. - Included
15 20 -
20 25 -
20 25 -
DH
12 15 - 98 x 129 x 75 • Insulated locking screw. - Included
12 15 -
20 25 -
< >
se.com/au Life is On | Schneider Electric | E-15
Switchboard Manufacturers
Current Transformers
Functions and characteristics
DB415923
DB416965
DB415939
DB415932
DB416968
DB416970
C
G
DH internal profile type
DB416971
< >
se.com/au Life is On | Schneider Electric | E-17
Switchboard Manufacturers
Current Transformers
Functions and characteristics
DB416002
DB416004
E
Aluminium Aluminium
16550 16551
DB416000
DB416082
Brass Brass
Covers
METSECT5COVER
DB416008
Hazard Label
B
Split core CT
CT internal Type H Type G
FF C HA HD HG FF V2 GA GD
HJ HP GG GJ
FF HM
HM
< >
se.com/au Life is On | Schneider Electric | E-19
Switchboard Manufacturers
Current Transformers
Reference numbers
0.5 1 3
GA
- - 1.25 100 METSECT5GA010
- - 1.5 150 METSECT5GA015
- - 2.5 200 METSECT5GA020
E METSECT5GAppp 23 x 33
- 1.5 - 250 METSECT5GA025
- 3.75 - 300 METSECT5GA030
1 - - 400 METSECT5GA040
GD
- 1.5 - 250 METSECT5GD025
PB119864
GJ
10 - - 1000 METSECT5GJ100
10 - - 1200 METSECT5GJ120
10 - - 1500 METSECT5GJ150
10 - - 1600 METSECT5GJ160
85 x 165
10 - - 2000 METSECT5GJ200
METSECT5GJppp
10 - - 2500 METSECT5GJ250
15 - - 3000 METSECT5GJ300
15 - - 4000 METSECT5GJ400
Reference numbers
A
Type H - split core current transformers (cable)
B
Accuracy class CT window Rating Commercial
Max power (VA) dimension (mm) Ip/5A (A) Reference no.
0.5 1 3
C
HA
- 1 - 18.4 x 19 150 METSECT5HA015 D
PB119870
PB119872
METSECT5HAppp METSECT5HDppp
- 1.5 - 300 METSECT5HD030
F
- 2.5 - 400 METSECT5HD040
1 - - 500 METSECT5HD050
HG G
- - 1.5 Ø32.5 100 METSECT5HG010
PB119874
HJ
- 2.5 - 300 METSECT5HJ030
- 5 42.4 x 43 400 METSECT5HJ040
- 5 - 500 METSECT5HJ050
2.5 - - 600 METSECT5HJ060
METSECT5HJppp
2.5 - - 750 METSECT5HJ075
2.5 - - 800 METSECT5HJ080
-
HM
PB119878
- 5 - 400 METSECT5HP040
- 5 - 500 METSECT5HP050
- 5 - 600 METSECT5HP060
- 5 - 750 METSECT5HP075
- 5 - 800 METSECT5HP080
METSECT5HPppp
- 5 - 1000 METSECT5HP100
< >
se.com/au Life is On | Schneider Electric | E-21
Switchboard Manufacturers
Current Transformers
Functions and characteristics
PB119865
E
GG Dimensions GJ Dimensions
PB119867
PB119869
Hx Products
B
HA Dimensions HD Dimensions
C
PB119871
PB119873
D
HG Dimensions HJ Dimensions
PB119875
PB119877
< >
se.com/au Life is On | Schneider Electric | E-23
Switchboard Manufacturers
Current Transformers
Functions and characteristics
PB119881
E
Reference numbers
Rogowski CTs A
B
PB118060
METSECTR30500
D
E
PowerLogic Rogowski Current Transformer
Main METSECTR30500 METSECTR46500 METSECTR60500 METSECTR90500 F
Range PowerLogic
Product or component type Current transducer
Accessory / part category Measurement accessory
G
PowerLogic EM3500 - EM3555A EM3502A EM3560 EM3550A EM3560 EM3561A
< >
se.com/au Life is On | Schneider Electric | E-25
Switchboard Manufacturers
Panel Instruments
General Overview
Schneider Electric panel instruments reliably comply with the most stringent standards, including
IEC, MID, UL, etc., and we thoroughly test all products with recognized, third-party laboratories.
Our products are simple to install, configure, and use. This saves our partners time and money and lets them deliver
the best solutions in a timely and cost-effective manner.
Whatever the size or type of application, the PowerLogic™ product line is an integral part of smart panels.
PB101118
PB112024
DB119006
Function
A
iAMP
DB119006
16029
C
Common technical data
• Accuracy: Class 1.5.
D
iAMP.
• Complies with standards IEC 60051-1, IEC 61010-1 and IEC 61000-4.
• Ferromagnetic device.
• Pseudo-linear scale over 90°. E
• Ammeters (except catalog number 16029):
- connection on CT, ratio In/5, to be ordered separately
- interchangeable dials. F
• Temperature:
DB119005
< >
se.com/au Life is On | Schneider Electric | E-27
Switchboard Manufacturers
Panel Instruments
Functions and characteristics
Function
iAMP
PB112024
Specific data
10 A direct reading ammeter
iVLT. • Minimum value measured: 4 % of rating.
• Measurement input consumption: 1 VA.
Multi-rating ammeter
• Ratings:
- in direct reading: 5 A.
PB112025
- by CT (not supplied) configurable on the front face of the ammeter: 10, 15, 20,
25, 40, 50, 60, 100, 150, 200, 250, 400, 500, 600, 800, 1000, 1500, 2000, 2500,
4000, 5000 A.
• Minimum value measured: 4 % of rating.
15208 • Measurement input consumption: 0.55 VA.
Voltmeter
• Direct measurement: 0...600 V AC
iFRE.
• Input impedance: 2 MW.
• Minimum value measured: 4 % of rating.
Frequency meter
• Minimum value measured: 20 Hz.
• Maximum value measured: 100 Hz.
• Full-scale display: 99.9 Hz.
Function
A
The 72 x 72 measurement devices are designed for flush-mounted installation on
doors, wicket doors and front plates of enclosures and cubicles.
AMP B
The ammeters measure in amps the current flowing through an electrical circuit.
PB101118-30_c
VLT
16009
The voltmeter measure in volts the potential difference (voltage) of an electrical C
circuit.
16006
• Temperature: G
- operation: -25 °C to 50 °C.
- reference: 23 °C.
AMP for motor feeder. • Influence of temperature on accuracy: ±0.003 %/ °C. H
• Utilisation frequency: 50 Hz to 60 Hz.
I
AMP Specific technical data
• Needs a In/5 CT to be ordered separately.
• Interchangeable dials to be ordered separately.
PB101116-30_c
< >
se.com/au Life is On | Schneider Electric | E-29
Switchboard Manufacturers
Panel Instruments
Functions and characteristics
Function
The 96 x 96 measurement devices are designed for flush-mounted installation on
doors, wicket doors and front plates of enclosures and cubicles.
PB101118-40_c
AMP
The ammeters measure in amps the current flowing through an electrical circuit.
VLT
The voltmeter measure in volts the potential difference (voltage) of an electrical circuit.
Function A
iCMA
This 4-position ammeter selector switch uses a single ammeter (using current
PB107119
iCMV.
• Connection: jumper terminals with captive screws, for cables up to 1.5 mm2. H
• Complies with standards: IEC/EN 60947-3.
I
Commercial Reference Numbers
Type Rating (A) Voltage (V AC) Width in mod. of 9 mm Comm. ref. no.
Connection
iCMA
iCMV
< >
se.com/au Life is On | Schneider Electric | E-31
Switchboard Manufacturers
Panel Instruments
Functions and characteristics
Function
PB112026
CH "48 x 48"
15607
• Consumption:
- 15607: 0.25 VA
- 15608: 0.15 VA
- 15609: 0.02 VA to 12 V and 0.3 VA to 36 V.
• Operating temperature: -20 °C to 70 °C.
CH "48 x 48"
• Degree of protection: IP65 on front face.
• Mounting on front face of monitoring switchboards.
12 to 36 V DC 15609
Connection
DB11426
DB11426
load
load
DB103477
C
Digital ammeters, voltmeter and iCL impulse counter and iCH hour counter
E
frequency meter iAMP, iVLT
F
DB103479
DB103474
< >
se.com/au Life is On | Schneider Electric | E-33
Switchboard Manufacturers
PB117510
PB108410
PB115001
PB108401
Applications
B
• Monitor power consumption for each floor, office sector, or unit
C
• Allocate energy cost to lower cost of operations, optimise your building’s power efficiency
• Connect to power management software to take full advantage of the IoT digital power installation
D
G
PB105289
A9MEM2000
< >
se.com/au Life is On | Schneider Electric | E-35
Switchboard Manufacturers
Advantages
• Active energy Class 1 accuracy, with LCD display
• Modbus RS-485 and pulse output
• Direct connect, self-powered
• MID approved
• Two tariffs
Display
Current input 40 A 40 A 40 A 45 A 45 A
Technical specifications
B
iEM2000T iEM2000 iEM2010 iEM2050 iEM2055
COMM reference number A9MEM2000T A9MEM2000 A9MEM2010 A9MEM2050 A9MEM2055
C
Direct connection Up to 40 A Up to 40 A Up to 40 A Up to 45 A Up to 45 A
10000, 2000, 1000, 100, 10, 1, 0.1, 0.01
Pulse output operation 100 pulses/kwh (120ms long)
pulses/kWh D
9999.99 kWh
Display capacity 999999.9 kWh
(switching to 99999.9 when over this value)
E
Voltage range (L-N) 184 to 276 V AC 195 to 253 V AC
Meter constant LED 3200 flashes per KWh 10000 flashes per KWh
F
Wiring capacity (Power) 4 mm2 2.5 mm2
IP protection IP40 front panel and IP20 casing IP51 front panel H
Temperature -10°C to 55°C -25°C to 55°C
Active energy I
Reactive energy
Active power
Reactive power
Power Factor
Frequency
Maximum diameter power connection clamps 8 mm2 (solid Maximum diameter power connection clamps 8 mm2 (solid
copper). See the appropriate product Installation Guide for copper). See the appropriate product Installation Guide for
complete instructions. complete instructions.
< >
se.com/au Life is On | Schneider Electric | E-37
Switchboard Manufacturers
The Acti9 iEM2100 series energy meters are ideal for basic kWh metering and billing applications and
support two protocols (Modbus and M-bus) that allow them to integrate seamlessly into your customers’
existing networks.
Applications
• Monitor the power consumption of each sector, unit, workshop…
• Manage an electrical installation and optimise your building’s power efficiency
• Various business, industrial and residential applications
E
PB118059
A9MEM2100
Display
Width (mm) 36 36 36 36 36 36
Current input 63 A 63 A 63 A 63 A 63 A 63 A
Multi-tariff 2 2 2
< >
se.com/au Life is On | Schneider Electric | E-39
Switchboard Manufacturers
Technical specifications
Technical specifications
Consumption 2.5 VA 3 VA
Active energy
Reactive energy
Active power
Reactive power
Power Factor
Frequency
A
iEM2000 and iEM2100 series commercial reference numbers
B
Comm. reference number Product
A9MEM2000T iEM2000T basic energy meter, no display
A9MEM2155 iEM2155 energy meter, Modbus communication, four quadrant energy measurement, two tariffs, MID certified E
< >
se.com/au Life is On | Schneider Electric | E-41
Switchboard Manufacturers
The Acti9 iEM3000 series energy meters is a cost-attractive, feature-rich energy metering offer for DIN
rail, modular enclosures. With Modbus and BACnet serial communication protocol support, you can easily
integrate these meters into commercial and non-critical buildings to add simple energy management
applications to any BMS, AMR or EMS system.
Applications
Cost management applications
• Bill checking to verify that you are only charged for the energy you use
• Sub-billing individual tenants for their energy consumption, including WAGES (NMI Pattern Approved references)
E • Aggregation of energy consumption, including WAGES, and allocating costs per area, per usage, per shift, or per time within
the same facility
• Basic metering of electrical parameters to better understand the behaviour of your electrical distribution system
PB108418
A9MEM3100
More than just kWh meters, the Acti9 iEM3000 series meters provide a full view of both energy consumption and on-site
generation with full four-quadrant measurement of active and reactive energy delivered and received. Additionally, extensive A
real-time measurements (V, I, P, PF) give customers greater detail on their energy usage, and multiple tariffs give customers the
flexibility to match the billing structure of their utility.
B
C
The solution for Competitive advantages
All markets that can benefit from a solution that includes PowerLogic iEM3000 • Compact size
series meters: D
• NMI compliant (selected models)
• Buildings & industry providing certified accuracy and
• Data centres and networks data security E
• Infrastructure (airports, road tunnels, telecom) • Programmable digital inputs/
ouputs
F
• Multi-tariff capability
Benefits • Onboard Modbus RS485 or
Optimise your energy consumption & enable energy efficiency practices BACnet serial communication G
• A complete range of energy
• Collect and analyse energy consumption data from each area for each type
meters H
of load or circuit
• Compatible with Acti9 range
• Gain an accurate understanding of business expenses by allocating the
energy-related costs Energy management system: I
• Use information to implement actions designed to reduce energy To get the most effective use
consumption from your Schneider Electric
measurement and metering devices,
we offer a range of dedicated data
Monitor the energy consumption of your tenants or customers and establish loggers and gateways for your
accurate invoices building energy management.
< >
se.com/au Life is On | Schneider Electric | E-43
Switchboard Manufacturers
Width (18mm module) 39207 39207 44686 39207 39207 39207 39207
Direct measurement (up to) 63 A/-/125 A 63 A/-/125 A 63 A/- 63 A/-/125 A 63 A/-/125 A 63 A/-/125 A 63 A/-/125 A
Measurement input through CTs
-/ /- -/ /- -/ -/ /- -/ /- -/ /- -/ /-
(1A, 5A)
Measurement input through VTs -/ /- -/ /- -/ /- -/ /-
E Active Energy measurements class 1/0.5S/1 1/0.5S/1 1/0.5S 1/0.5S/1 1/0.5S/1 1/0.5S/1 1/0.5S/1
M-bus
Modbus
Communication
protocols
BACnet
Lon
Commercial reference numbers A9MEM3200 A9MEM3210 A9MEM3215 A9MEM3250 A9MEM3235 A9MEM3255 A9MEM3265
How to read table: If a cell contains a single value, that value applies to all meter models identified in the header cell(s). For cells with multiple values, the
values correspond from left to right with the meter models listed from top to bottom for each associated header cell. For example, a cell with
“A / B / C” means A for iEM31xx models, B for iEM32xx models, and C for iEM33xx models
Network
1P+N, 3P, 3P+N
D
support LVCTs, Rogowski coils, and VTs
Wiring capacity 6 mm² for currents and 4 mm² for voltages
Display max LCD 99999999.9kWh or 99999999.9MWh
E
Voltage (L-L) 3 x 100/173 V AC to 3 x 277/480 V AC (50/60 Hz)
IP protection IP40 front panel and IP20 casing
Temperature -25°C to 70°C (K55) F
Product size 5 steps of 18 mm
Overvoltage & measurement Category III, Degree of pollution 2
kWh G
kVARh
Active power
Reactive power H
Currents & voltages
Overload alarm
Hour counter I
< >
se.com/au Life is On | Schneider Electric | E-45
Switchboard Manufacturers
kWh
kVARh
Active power
Reactive power
Overload alarm
Hour counter
(1)
If used for MID purposes, iEM32xx must use CT secondary set to 5 A.
B
PB105302
PB105303
C
PB105313
E
F
Acti9 iEM3100/iE M3200 Series front flaps open and closed
G
PB105306
PB1053241
Please see the appropriate Installation Guide for accurate and complete information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-47
Switchboard Manufacturers
E
iEM2100 Watt hour meters – 1 phase digital (direct connect up to 63 A)
Model Description Reference
A9MEM2150
Reference numbers
iEM3355
advanced multi-tariff kWh meter & electrical parameters with RS485
Modbus
A9MEM3355 D
iEM3355 advanced multi-tariff kWh meter & electrical parameter with RS485
Modbus A9MEM3355-NMI
(NMI) NMI M6-1 Pattern Approved E
advanced multi-tariff kWh meter & electrical parameter with RS-485
iEM3365 A9MEM3365
BACnet
iEM3400 kWh meters – 3 phase digital (using 0.333V - 1.0V low voltage CTs) G
Model Description Reference
A9MEM3455
iEM3455 kWh meter & electrical parameters with pulse output and RS485 Modbus A9MEM3455
H
iEM3465 kWh meter & electrical parameters with pulse output and RS485 BACnet A9MEM3465
Current range (A) CT core length (mm) Diameter when closed (mm) Reference
50 to 5000 250 80 METSECTR25500
300 96 METSECTR30500
460 146 METSECTR46500
600 191 METSECTR60500
900 287 METSECTR90500
< >
se.com/au Life is On | Schneider Electric | E-49
Switchboard Manufacturers
PM3000 series
General Overview
The PowerLogic PM3000 series power meters are a cost-attractive, feature-rich range of DIN rail- mount-
ed power meters that offers all the measurement capabilities required to monitor an electrical installation.
Ideal for power metering and network monitoring applications that seek to improve the availability and reliability of your electrical
distribution system, the meters are also fully capable of supporting sub-metering and cost allocation applications.
Applications
Cost management applications
• Bill checking to verify that you are only charged for the energy you use
• Aggregation of energy consumption, including WAGES, and cost allocation per area, per usage, per shift or per time within the
E same facility
• Energy cost and usage analysis per zone, per usage or per time period to optimise energy usage
• Metering of electrical parameters to better understand the behaviour of your electrical distribution system
PB108447
METSEPM3250
H
Competitive advantages
Connectivity advantages
• Programmable digital input I
- External tariff control signal (4 tariff)
- Remote reset partial counter
- External status like breaker status
- Collect WAGES pulses
• Programmable digital output
- Alarm (PM3255)
- KWh pulses
• Graphic LCD display
• Modbus RS-485 with screw terminals
Multi-tariff capability
The PM3000 series allows users to arrange KWh consumption in four different
registers. This can be controlled by:
• Digital inputs. Signal can be provided by PLC or utilities
• Internal clock programmable by HMI
• Through communication
< >
se.com/au Life is On | Schneider Electric | E-51
Switchboard Manufacturers
PM3000 series
Functions and characteristics
Performance standard
IEC61557-12 PMD/Sx/K55/0.5
General
Use on LV and HV systems
Number of samples per cycle 32 32 32 32
CT input 1A/5A
VT input
E Multi-tariff 4 4 4 4
Multi-lingual backlit display
Instantaneous rms values
Current, voltage Per phase and average
Active, reactive, apparent power Total and per phase
Power factor Total and per phase
Energy values
Active, reactive and apparent energy; import and export
Demand value
Current, power (active, reactive, apparent) demand; present
Current, power (active, reactive, apparent) demand; peak
Power quality measurements
THD Current and voltage
Data recording
Min/max of the instantaneous values
Power demand logs
Energy consumption log (day, week, month)
Alarms with timestamping 5 5 15
Digital inputs/digital outputs 0/1 44594
Communication
RS-485 port
Modbus protocol
Commercial reference number METSEPM3200 METSEPM3210 METSEPM3250 METSEPM3255
< >
se.com/au Life is On | Schneider Electric | E-53
Switchboard Manufacturers
PM3000 series
Functions and characteristics
Mechanical characteristics
Weight 0.26 kg
IP degree of protection (IEC 60529) IP40 front panel, IP20 meter body
Dimension 90 x 95 x 70 mm
Environmental conditions
Operating temperature -25 ºC to 55 ºC
Pollution degree 2
Electromagnetic compatibility
Electrostatic discharge Level IV (IEC 61000-4-2)
Safety
CE as per IEC 61010-1g
Communication
RS-485 port Half duplex, from 9600 up to 38400 baud, Modbus RTU (double insulation)
Display characteristics
Dimensions (VA) 43 mm x 34.6 mm
Standard compliance
IEC 61557-12, EN 61557-12
IEC 61010-1, UL 61010-1
IEC 62052-11, IEC 62053-21, IEC 62053-22, IEC 62053-23
EN 50470-1, EN 50470-3
B
PB105440
H
PM3200 series dimensions
I
PB105302
PB105447
Please see the appropriate Installation Guide for accurate and complete information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-55
Switchboard Manufacturers
Applications:
• Monitors your electrical installation from main incomer down to load level
• Suitable for various businesses, buildings, industrial and residential applications
E with easy integration in upper systems
• Supports and enables Energy Efficiency programs and standards such as:
• European Energy Efficiency Directive (EED)
- Energy Performance of Buildings Directive (EPBD)
- IEC 60364-8-1 “Low Voltage Electrical installations - Energy Efficiency”
- EN 17267 “Energy Measurement and Monitoring plan”
- ISO 50001 “Energy Management System”
A9MEM1570
A9MEM1571
LV434020
A9MEM1521
PowerTag Energy Rex 160 A (F160) PowerTag Energy Monoconnect 63A (M63) PowerTag Energy Rope 2000 A (R2000)
PowerTag Energy
< >
se.com/au Life is On | Schneider Electric | E-57
Switchboard Manufacturers
Feature selection
Connection Possibilities A
Source Source
1 PowerTag Energy • When breaker is OFF,
Connected Upstream PowerTag Energy is B
de-energized. PowerTag
Power Flow
Power Flow
(U and I)
Energy sends Voltage loss
alarm before complete stop.
• When breaker is OFF, C
PowerTag Energy remains
energized.
PowerTag Energy
Connected Downstream D
Load Load
2 (U and I)
Load
3
PowerTag Energy Load
• When breaker is OFF,
F
Connected Downstream
PowerTag Energy remains
(U and I)
energized.
G
Power Flow
• When breaker is OFF,
Power Flow
PowerTag Energy is
de-energized. PowerTag
Energy sends Voltage
loss alarm before com- H
plete stop. PowerTag Energy
Connected Upstream
4 (U and I)
Source Source
I
Note:
• In association with a contactor, a Variable Speed Drive or a motor starter: PowerTag Energy can ONLY be installed UPSTREAM these devices.
• Some PowerTag Energy can be installed either on the TOP or on the BOTTOM of the protective devices.
• Check the possible mounting position as indicated in the “Catalog numbers” chapter.
A9XMWD20
A9XMWD100
PB113286
ZBRN1
A9XELC10
EER31800
< >
se.com/au Life is On | Schneider Electric | E-59
Switchboard Manufacturers
63 A
IEC 61557-12 PMD-I/DD/K55/1
As per the above standard:
With its compact design and innovative concept, PowerTag Energy 63 A fits directly on the protective device and as a result has
no impact on DIN rail occupancy and switchboard size.
It is therefore well adapted to be mounted from head of group down to final circuits.
Since voltage and current are measured directly at the same point on the circuit to be monitored, it provides accurate
measurement and relevant information such as voltage loss.
PowerTag Energy is compatible with SE product ranges as per the selection guide CA908058.
E
Main characteristics
PowerTag Energy measures the following values in accordance with the IEC 61557-12 standard PMD-I/DD/K55/1:
• Energy:
- Active energy (kWh): total and partial, delivered and received.
• Real-time measurement values:
- Voltages (V): phase-to-phase and phase-to-neutral.
- Currents (A): per phase.
- Power:
- Active power (W): total and per phase.
- Apparent power (VA): total.
- Power factor.
• Voltage loss alarms:
- PowerTag Energy sends a “voltage loss” alarm and the current-per-phase value before being de-energized.
- At “voltage loss”, PowerTag Energy adds an overload alarm if the current is higher than the rated current of the associated
protective device.
Note: Functions listed above depends on Concentrator/Gateway.
PB104437
PB107143
PB120058
PowerTag Energy
Flex 63 A (F63)
A9MEM1522
A9MEM1572
PowerTag Energy
Monoconnect 63 A (P63)
Product selection A
Neutral position
Some references of PowerTag Energy 63 A (Monoconnect and PhaseNeutral) exist in Top or Bottom version. B
This is linked to the position of the neutral of the PowerTag Energy.
C
D
PowerTag Energy
"Top" • Designed to be
mounted on the
Bottom of the circuit
E
• Designed to be breaker.
mounted on the Top F
of the circuit breaker.
PowerTag Energy
"Bottom" G
H
Note:
• Some PowerTag Energy can be installed either on the TOP or on the BOTTOM of the protective devices.
• Check the possible mounting position as indicated in the “Catalog numbers” chapter. I
• In association with a contactor, a Variable Speed Drive or a motor starter: PowerTag Energy can ONLY be installed UPSTREAM
these devices.
Number of poles
Choose the PowerTag Energy according to the number of poles of the protective device: one PowerTag Energy per protective
device.
Ex.: 3 Pole PowerTag Energy 63 A for a 3 pole CB.
< >
se.com/au Life is On | Schneider Electric | E-61
Switchboard Manufacturers
Main characteristics
Rated voltage 1P+N / 1P+W Un Phase-to-neutral 200… 240 V AC ± 20 %
3P/3P+N y 2 VA
Additional characteristics
Operating temperature -25°C to +60°C
Pollution degree 3
Altitude y 2000 m
Degree of protection Device only IP20
IK 5
Radio-frequency communication
ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz
Current I 1 40 mA to 63 A
Voltage U 0.5 Un ± 20 %
A9MEM1521
A
Commercial Type Mounting Description
reference number
A9MEM1520 A9MEM1521 A9MEM1520 1P+wire Top or bottom PowerTag Energy M63 1PW B
A9MEM1521 Top PowerTag Energy M63 1PN T
A9MEM1540
A9MEM1522
1P+N
A9MEM1522 Bottom PowerTag Energy M63 1PN B C
A9MEM1540 Top or bottom PowerTag Energy M63 3P
3P
A9MEM1540 A9MEM1522 A9MEM1543 (1) PowerTag Energy M63 3P 230V LL
D
A9MEM1541 Top PowerTag Energy M63 3PN T
A9MEM1543
3P+N
A9MEM1542 Bottom PowerTag Energy M63 3PN B
E
Designed to fit the following devices: iC60, Reflex iC60, DT60, iID.
A9MEM1543 For additional information and the list of Schneider Electric compatible devices and Concentrators/Gateways, refer
to the Selection Guide pages 95 to 102.
F
A9MEM1541
A9MEM1542
(1) Not compatible with Acti9 Smartlink SI D (A9XMWA20) and Acti9 Smartlink SI B (A9XMZA08)
G
A9MEM1541 A9MEM1542
PowerTag Energy PhaseNeutral 63 A
H
Commercial reference numbers
PowerTag Energy for Acti9 and Multi9 PhaseNeutral offers: «Single-terminal» circuit
A9MEM1561
A9MEM1562
A9MEM1563
breakers, RCDs and switches at pitch of 9 mm between phase and neutral, rating I
less than or equal to 63 A.
A9MEM1572
Designed to fit the following devices: DT40, iDPN, C40, i DPN Vigi.
For additional information and the list of Schneider Electric compatible devices and Concentrators/Gateways, refer
A9MEM1571 A9MEM1572 to the Selection Guide pages 95 to 102.
A9MEM1564
A9MEM1573
PowerTag Energy Flex for other devices and specific installations, rating less than or equal to 63 A.
A9MEM1574
A9MEM1574 (2) 3P+N Top or bottom PowerTag Energy F63 3PN 127/220V
Designed to fit the following devices: Vigi iDT40, Vigi iC40, Vigi iC60, iC60 double terminal, iID double terminal.
For additional information and the list of Schneider Electric compatible devices and concentrators/ gateways, refer
to the Selection Guide pages 95 to 102.
A9MEM1570 A9MEM1574 (2) Not compatible with Acti9 PowerTag Link C (A9XELC10), Smartlink SI D (A9XMWA20) and Smartlink SI B
(A9XMZA08)
< >
se.com/au Life is On | Schneider Electric | E-63
Switchboard Manufacturers
DB122945
DB112804
DB123553
DB112805
DB123554
DB123008
18 mm 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2
AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14
DB407924
DB407923
DB407925
ø 8.5 ø 8.5 ø 8.5 ø 8.5
43 43 43 43
18 36 54 72
Please refer to PowerTag Energy 63 A Installation Sheet for accurate and complete information on the installation of this product.
DB123553
DB112805
DB123554
DB123008
DB122945
DB112804
C
1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm 2 x 1.5 to 2.5 mm2
D
AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14
Stripping length: respect the stripping length stated on the device the PowerTag Energy is associated with.
E
18
I
ø 8.5
44.5
ø 8.5
43
200
200
9 28.5 27
8 8
3
11 11
18
3 5 3.5
18 48 42
5
9
3P+N 48
Please refer to PowerTag Energy 63 A Installation Sheet for accurate and complete information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-65
Switchboard Manufacturers
DB123008
DB122945
DB112804
DB123553
DB112805
DB123554
1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm2 2 x 1.5 to 2.5 mm2 1.5 to 16 mm 2 x 1.5 to 2.5 mm2
AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14 AWG: 16...6 AWG: 16...14
E Stripping length: respect the stripping length stated on the device the PowerTag Energy is associated with.
18 20 54 19.5
DB428604
DB428603
DB428604_2
54 19.5
18
ø 8.5 ø .85
44.5 43
18
ø 8.5
43
200 200
200
70 70
70
12
12
12
3 1 3 1
3 1
1P+N 3P 3P+N
Please refer to PowerTag Energy 63 A Installation Sheet for accurate and complete information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-67
Switchboard Manufacturers
Flex 160 A
IEC 61557-12 PMD-II/DD/K70/1
As per the above standard:
With its flex design this PowerTag Energy can be used on many products or group of loads up to 160 A on 3P or 3P+N networks.
Its removable spring connector for voltage picking facilitates its installation, and shapes for brackets allows to mount and maintain
it where needed in a panel.
E Main characteristics
PowerTag Energy Flex 160 A measures the following values in accordance with the IEC 61557-12 standard PMD-II/DD/K70/1:
• Energy (4 quadrants):
- Active energy (kWh): total and partial, delivered and received.
- Active energy per phase (kWh): total and partial, delivered and received.
- Reactive energy (kVARh): total and partial, delivered and received.
- Reactive energy per phase (kVARh): total and partial, delivered and received.
- Apparent energy (kVAh): total and partial.
- Apparent energy per phase (kVAh): total and partial.
• Real-time measurement values:
- Voltages (V): phase-to-phase (U12, U23, U31) and phase-to-neutral (V1N, V2N, V3N).
- Currents (A): per phase (I1, I2, I3), calculated neutral current when connected (IN) .
- Power:
- Active power (W): total and per phase.
- Reactive power (VAR): total and per phase.
- Apparent power (VA): total and per phase.
- Frequency (Hz).
- Power factor: total and per phase.
• Voltage loss alarms:
- PowerTag Energy Flex sensor sends a “voltage loss” alarm and the current-per-phase value before being de-energized.
- At “voltage loss”, PowerTag Energy Flex adds an overload alarm if the current is higher than the rated current of the
associated protective device
Note: Functions listed above depends on Concentrator/Gateway.
A9MEM1580
Installation A
PowerTag Energy Flex 160 A can be installed in a panel directly on cables or busbars, associated to a product or not. Voltage
pickings removable spring terminal has to be wired by 1 copper wire per phase with following characteristics:
B
Wire Range
C
Solid Stranded Stranded with terminal ends
0.2...1.5 mm² 0.2...2.5 mm² 0.25...1.5 mm²
D
24...16 AWG 24...14 AWG 24...16 AWG
E
Neutral picking shall be connected to have phase-to-neutral voltages, energy per phase and power per phase provided.
PowerTag Energy Flex 160 A is mainly advised for ComPact NSXm, ComPact INS160, F
Acti9 NG125, Acti9 C120, PowerPact B, TeSys GV4, and all other devices with a rating between 63 A and 160 A.
H
PB120394
< >
se.com/au Life is On | Schneider Electric | E-69
Switchboard Manufacturers
Technical specifications
Main characteristics (as per IEC 61557-12)
Rated voltage Un Phase-to-neutral 100...277 V AC ± 20 %
Phase-to-phase 173...480 V AC ± 20 %
Frequency 50/60 Hz
Maximum consumption 3 VA
Additional characteristic
Operating temperature -25 °C to +70 °C
Pollution degree 3
IK05
Radio-frequency communication
ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz
C
For the list of Schneider Electric compatible devices and concentrators, refer to the
Selection Guide pages 95 to 102.
Contact your Schneider Electric representative for complete ordering information. D
E
PowerTag Energy Flex 160 A dimensions
mm F
DB436016
in
38.9
1.53
G
21.4
0.83
ø17 I
ø0.67
DB436017
<%
J7KK
27 27
1.06 1.06
90.8
3.57
Please refer to PowerTag Energy Flex 160 A Installation Sheet for accurate and complete information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-71
Switchboard Manufacturers
E Main characteristics
PowerTag Energy M250/M630 measures the following values in accordance with the IEC 61557-12 standard PMD-II/DD/K70/1:
• Energy (4 quadrants):
- Active energy (kWh): total and partial, delivered and received.
- Active energy per phase (kWh): total.
- Reactive energy (kVARh): partial, delivered and received.
• Real-time measurement values:
- Voltages (V): phase-to-phase (U12, U23, U31) and phase-to-neutral (V1N, V2N, V3N).
- Currents (A): per phase (I1, I2, I3).
- Power:
- Active power (W): total and per phase.
- Reactive power (VAR): total.
- Apparent power (VA): total.
- Frequency (Hz).
- Power factor.
• Voltage loss alarms:
- PowerTag Energy sends a “voltage loss” alarm and the current-per-phase value before being de-energized.
- At “voltage loss”, PowerTag Energy adds an overload alarm if the current is higher than the rated current of the associated
protective device.
Note: Functions listed above depends on Concentrator/Gateway.
LV434020
Installation A
The module is self-powered and is installed for fixed devices directly on the bottom side of the circuit
breaker or Vigi add-on terminals. For plug-in devices, it has to be installed on the base itself, top or B
bottom.
PowerTag Energy M250/M630 3P has to be used with 3P devices, and an external neutral voltage tap C
is provided in case of the installation has a neutral to provide phase-to-neutral voltages, active energy
per phase and power per phase.
D
PowerTag Energy M250/M630 3P+N has to be used with 4P devices and with ComPact INS/INV
switches.
E
Powertag 3P Powertag 3P+N
N L1 L2 L3 N L1 L2 L3 F
G
ComPact ComPact
NS, NSX, NS, NSX,
INS, INV INS, INV
PowerTag NSX
H
PowerTag NSX
DB432583
DB432582
PowerTag M250/M630 modules are compatible with ComPact NSX100/160/250, ComPact NSX400/630,
ComPact INS250-100A to 250A, ComPact INS320/400/500/630, ComPact INV100/160/200/250,
ComPact INV320/400/500/630, ComPact NS100/160/250, ComPact NS400/630, TeSys GV5, TeSys GV6
and TeSys GV7.
< >
se.com/au Life is On | Schneider Electric | E-73
Switchboard Manufacturers
Technical specifications
Main characteristics
Rated voltage Un Phase-to-neutral 230 VAC ± 20 %
Frequency 50/60 Hz
Additional characteristic
Operating temperature -25 °C to +70 °C
Pollution degree 3
IK07
Radio-frequency communication
ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz
Frequency f 1 45 to 55 Hz 45 to 65 Hz
LV434021
Commercial reference numbers
Commercial Type Description Connection adapter
reference for mounting on
B
number plug-in base only
LV434020 M250 3P PowerTag Energy 250 A 3P LV429306 C
LV434023
LV434022
E
For the list of Schneider Electric compatible devices and concentrators, refer
to the Selection Guide pages 95 to 102.
F
Contact your Schneider Electric representative for complete ordering
PB120429
information.
(1) For plug-in devices only: when plate mounted, need to add an intercalary wedging plate under
G
the PowerTag Energy module with following dimensions:
I
DB432580
45 45 2Ø6
65
3P
37
45 90
2 ø6
DB432581
65
3P+N 37
180
4
< >
se.com/au Life is On | Schneider Electric | E-75
Switchboard Manufacturers
NSX100-250 / NSX400-630
3P 4P
A I I
B J
H J
DB426008
DB436010_1
H
(1)
X
X
K
D
L
E (1)
E M
(1)
F G
Y Z Y Y
A 3P 4P
B I I
H J J
DB436015
DB436010_2
X
X X K
L
D
E M
(1)
Y Y
mm A H I J
B C D E F G K L M
in 3P 4P 3P 4P 3P 4P 3P 4P
NSX100-250
105 140 52.5 80.5 201 120.5 72 14 3 Ø6 6 Ø6 35 70 17. 5 17. 5 125 62.5 40
3 6
4.13 5.51 2.06 3.17 7.91 4.74 2.83 0.55 1.34 2.75 0.68 0.68 4.92 2.46 1.57
Ø0.23 Ø0.23
NSX400-630
140 185 70 127.5 320 192.5 96 14 6 Ø6 6 Ø6 45 90 22.5 22.5 200 100 65
6 6
5.51 7.28 2.75 5.02 12.59 7.57 3.78 0.55 1.77 3.5 0.88 0.88 7.87 3.93 2.56
Ø0.23 Ø0.23
NSX100-250
105 140 52.5 109 260 151 72 14 3 Ø6 6 Ø6 35 70 17. 5 17. 5 155 77.5 55
with plug-in base
3 6
4.13 5.51 2.06 4.29 10.23 5.94 2.83 0.55 1.34 2.75 0.68 0.68 6.1 3.05 2.16
Ø0.23 Ø0.23
NSX400-630
140 185 70 153 406 253 100 14 4 Ø06 6 Ø6 45 90 22.5 22.5 250 125 83
with plug-in base
4 6
5.51 7.28 2.75 6.02 15.98 9.96 3.93 0.55 1.77 3.5 0.88 0.88 9.84 4.92 3.26
Ø0.23 Ø0.23
Please refer to PowerTag Energy 250 A & 630 A Installation Sheet for accurate and complete information on the installation of this product.
INS250 / INV100-250
A
INS320-630 / INV320-630
A B
DB436009
DB436012
I
B
J
C
H
C
X X D
X
K
D
L
E E
M
Y F Z G F
Y
G
mm in A B C D E F G H I J K L M
INS250 140 70 68 176 108 72 14 6 Ø6 70 35 100 50 40
INV100-250
5.51 2.75 2.67 6.93 4.25 2.83 0.55 6 Ø0.23 2.75 1.37 3.93 1.96 1.57 H
INS320-630 185 92.5 102.5 270 167.5 96 14 6 Ø6 90 45 150 75 65
INV320-630
7.28 3.64 4.03 10.62 6.59 3.78 0.55 6 Ø0.23 3.5 1.77 5.9 2.95 2.56
I
< >
se.com/au Life is On | Schneider Electric | E-77
Switchboard Manufacturers
Main characteristics
E PowerTag Energy Rope measures the following values in accordance with the IEC 61557-12 standard PMD-II/DD/K70/1:
• Energy (4 quadrants):
- Active energy (kWh): total and partial, delivered and received.
- Active energy per phase (kWh): total and partial, delivered and received.
- Reactive energy (kVARh): total and partial, delivered and received.
- Reactive energy per phase (kVARh): total and partial, delivered and received.
- Apparent energy (kVAh): total and partial.
- Apparent energy per phase (kVAh): total and partial.
• Real-time measurement values:
- Voltages (V): phase-to-phase (U12, U23, U31) and phase-to-neutral (V1N, V2N, V3N).
- Currents (A): per phase (I1, I2, I3), calculated neutral current when connected (IN).
- Power:
- Active power (W): total and per phase.
- Reactive power (VAR): total and per phase.
- Apparent power (VA): total and per phase.
- Frequency (Hz).
- Power factor: total and per phase.
• Voltage loss alarms:
- PowerTag Energy Rope sensor sends a “voltage loss” alarm and the current-per-phase value before being de-energized.
- At “voltage loss”, PowerTag Energy Rope adds an overload alarm if the current is higher than the rated current of the
associated protective device.
Note: Functions listed above depends on Concentrator/Gateway.
A9MEM1590
Installation
A
PowerTag Energy Rope 18 mm module can be mounted on DIN rail or fastened with brackets anywhere in a panel. Then its
openable current sensors have to be installed around conductors, cables or busbars, whatever they are insulated or not. Voltage
pickings removable spring terminal has to be wired by 1 copper wire per phase with following characteristics: B
Wire range
Solid Stranded Stranded with terminal ends C
0.2...1.5 mm² 0.2...2.5 mm² 0.25...1.5 mm²
E
Neutral picking shall be connected to have phase-to-neutral voltages, energy per phase and power per phase provided.
PowerTag Energy Rope is mainly advised for ComPact NS, MasterPact NT and NW,
MasterPact MTZ NA and HA, for retrofit, for group of loads, and for all other devices with a rating up to 2000 A. F
H
PB120437
< >
se.com/au Life is On | Schneider Electric | E-79
Switchboard Manufacturers
Technical specifications
Main characteristics (as per IEC 61557-12)
Rated voltage Un Phase-to-neutral 100...277 VAC ± 20 %
Phase-to-phase 173...480 VAC ± 20 %
Frequency 50/60 Hz
Maximum current Imax 200 A / 600 A / 1000 A / 2000 A
Maximum operating current 1.2 x Imax
Saturation current 2 x Imax
Maximum consumption 3 VA
Starting current Ist 120 mA / 400 mA / 600 mA / 1.2 A
Basic current Ib 30 A / 100 A / 150 A / 300 A
Additional characteristic
E
Operating temperature -25 °C to +70 °C
Maximum primary conductor temperature 100 °C
Storage temperature -40 °C to +85 °C
Overvoltage category As per IEC 61010-1 Cat. IV
Measuring category As per IEC 61010-2-030 Cat. IV
Pollution degree 3
Altitude Up to 2000 m without derating (1)
Degree of protection device IP20 (IP40 front face)
IK05
Radio-frequency communication
ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz
Channels As per IEEE 802.15.4 11 to 26
Isotropic Radiated Power Equivalent (EIRP) 0 dBm
Maximum transmission time < 5 ms
Channel occupancy For 1 device messages sent every 5 seconds
Characteristics of measuring functions
Function Symbol Performance category as per IEC 61557-12 Measuring range
(PMD-II/DD/K70/1) (200 A / 600 A / 1000 A / 2000 A)
Class Measuring range
(200 A / 600 A / 1000 A / 2000 A)
Total active power P 1 3 to 200 A / 10 to 600 A / 29 W (10 W) to 240 kW / 96 W (32 W) to 720 kW /
(Active power per phase) 15 to 1000 A / 30 to 2000 A 144 W (48 W) to 1200 kW / 288 W (96 W) to 2400 kW
Total reactive power QA 2 36 VAR (12 VAR) to 240 kVAR /
(Reactive power per phase) 120 VAR (40 VAR) to 720 kVAR /
180 VAR (60 VAR) to 1200 kVAR /
360 VAR (120 VAR) to 2400 kVAR
Total apparent power SA 2 46 VA (15 VA) to 240 kVA /
(Apparent power per phase) 154 VA (51 VA) to 720 kVA /
231 VA (77 VA) to 1200 kVA /
461 VA (154 VA) to 2400 kVA
Active Energy: Ea 1 0 to 281.109 kWh
per phase, total, partial, delivered
and received
Reactive energy: ErA 2 0 to 281.109 kVARh
per phase, total, partial, delivered and
received
Apparent energy: EapA 2 0 to 281.109 kVAh
per phase, total, partial
Frequency f 0.5 50 / 60 Hz ± 2 % 45 to 65 Hz
Phase current I 1 6 to 200 A / 20 to 600 A / 120 mA to 400 A / 400 mA to 1200 A /
Neutral current INC 2 30 to 1000 A / 60 to 2000 A 600 mA to 2000 A / 1.2 A to 4000 A
Voltages (Line to Line) U 0.5 Un ± 20 % 138 to 576 VAC
Power factor PFA 1 From 0.5 inductive to 0.8 capacitive -1 to 1
(per phase, total)
E
For the list of Schneider Electric compatible devices and concentrators, refer
to the Selection Guide pages 95 to 102.
F
Contact your Schneider Electric representative for complete ordering
information.
G
H
PowerTag Energy Rope 200 A to 2000 A dimensions
18 Ø100 I
PT_Rope
105 45
4.13 1.77
1m
3.28 ft
R600 3P/3P+N
R1000 3P/3P+N
R2000 3P/3P+N
Please refer to PowerTag Energy Rope 200 A to 2000 A Installation Sheet for accurate and complete
information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-81
Switchboard Manufacturers
PowerTag Energy 63 A
Reference Numbers
PowerTag Energy 63 A B
< >
se.com/au Life is On | Schneider Electric | E-83
Switchboard Manufacturers
PowerTag Energy 63 A
(1) You may need to change the voltage measurement cable terminals of the PowerTag Energy F63 by other cable ends (wire AWG22/0.33 mm2) for a more suitable connection to this product.
(2) PowerTag Energy sensors withstand motor starting in-rush currents. Environmental mission profile : Buildings as per 60721-3-3.
Reference Numbers
ComPact
Circuit breakers
NSXm 3P / 3P+N Top / Bottom -5
Switches
NSXm NA 3P / 3P+N Top / Bottom -5
PowerPact
Circuit breakers
B 3P / 3P+N Top / Bottom -6
TeSys
Motor circuit breakers
GV3 > 65 A 3P Top / Bottom
Contactors
63 A < TeSys D y 160 A 3P / 3P+N Top Upstream only
(5) It is advised to use EverLink connectors with control wire terminal (LV426970 for 3P / LV426971 for 4P)
(6) It is advised to use EverLink connectors with control wire terminal (LV426974 for 3P / LV426975 for 4P)
< >
se.com/au Life is On | Schneider Electric | E-85
Switchboard Manufacturers
Reference Numbers
Selection guide for product compatibility*
(Compatibility for terminal not equipped with comb busbar) A
B
PowerTag Energy Rope
C
D
Products Mounting R200 3P / 3P+N R600 3P / 3P+N R1000 3P / 3P+N R2000 3P / 3P+N
position
(AC network) E
ComPact
Circuit breakers
NS 630b 3P / 3P+N Top / Bottom - - - F
NS 800/1000 3P / 3P+N Top / Bottom - - -
NS 1250/1600/1600b/2000 3P / 3P+N Top / Bottom - - -
Switches G
INS/INV 630b 3P / 3P+N Top / Bottom - - -
INS/INV 800/1000 3P / 3P+N Top / Bottom - - -
INS/INV 1250/1600/2000 3P / 3P+N Top / Bottom - - - H
NS 630b NA 3P / 3P+N Top / Bottom - - -
NS 800/1000 NA 3P / 3P+N Top / Bottom - - -
NS 1250/1600/1600b/2000
I
3P / 3P+N Top / Bottom - - -
NA
MasterPact
Circuit breakers
NT 06 3P / 3P+N Top / Bottom - - -
NT 08/10 3P / 3P+N Top / Bottom - - -
NT 12/16 3P / 3P+N Top / Bottom - - -
NW 08/10 3P / 3P+N Top / Bottom -
NW 12/16/20 3P / 3P+N Top / Bottom - - -
Switches
NT 06 HA 3P / 3P+N Top / Bottom - - -
NT 08/10 HA 3P / 3P+N Top / Bottom - - -
NT 12/16 HA 3P / 3P+N Top / Bottom - - -
NW 08/10 NA/HA/HF 3P / 3P+N Top / Bottom - - -
NW 12/16/20 NA/HA/HF 3P / 3P+N Top / Bottom - - -
MTZ1 06 HA 3P / 3P+N Top / Bottom - - -
MTZ1 08/10 HA 3P / 3P+N Top / Bottom - - -
MTZ1 12/16 HA 3P / 3P+N Top / Bottom - - -
MTZ2 08/10 NA/HA/HA10 3P / 3P+N Top / Bottom - - -
MTZ2 12/16/20 NA/HA/HA10 3P / 3P+N Top / Bottom - - -
TeSys
Contactors
TeSys D > 160 A 3P / 3P+N Top Upstream only - - -
160 A < TeSys F y 2000 A 3P / 3P+N Top Upstream only Upstream only Upstream only Upstream only
Others
Circuit breakers / Switches / Motor circuit breakers
All products below 200 A 3P / 3P+N Top / Bottom - - -
All products between 200 A 3P / 3P+N Top / Bottom - - -
and 600 A
All products between 600 A 3P / 3P+N Top / Bottom - - -
and 1000 A
All products between 1000 A 3P / 3P+N Top / Bottom - - -
and 2000 A
< >
se.com/au Life is On | Schneider Electric | E-87
Switchboard Manufacturers
E
Wiser IP module PowerTag Link C Smartlink SI B PowerTag Link
Wiser IP module+ PowerTag Link C+ A9XMZA08 A9XMWD20
EER31800 A9XELC10 Smartlink SI D PowerTag Link HD
A9XMWA20 A9XMWD100
PowerTag Energy M63
A9MEM1520
A9MEM1521
A9MEM1522
A9MEM1540
A9MEM1541
A9MEM1542
A9MEM1543 -
R9M21 - - -
R9M22 - - -
R9M40 - - -
R9M41 - - -
R9M42 - - -
R9M43 - - -
A9MEM1562
A9MEM1563
A9MEM1571
A9MEM1572
A9MEM1564 - - -
A9MEM1570
A9MEM1573 - - -
A9MEM1574 - - -
R9M70 - - -
Reference Numbers
compatibility* B
Concentrators / gateways
C
A9MEM1522 -
H
A9MEM1540 -
A9MEM1541 -
A9MEM1542 - I
A9MEM1543 - -
R9M21 - - -
R9M22 - - -
R9M40 - - -
R9M41 - - -
R9M42 - - -
R9M43 - - -
A9MEM1562 -
A9MEM1563 -
A9MEM1571 -
A9MEM1572 -
A9MEM1564 - -
A9MEM1570
A9MEM1573
A9MEM1574 - -
R9M70 - - -
< >
se.com/au Life is On | Schneider Electric | E-89
Switchboard Manufacturers
E
Wiser IP module PowerTag Link C Smartlink SI B PowerTag Link
Wiser IP module+ PowerTag Link C+ A9XMZA08 A9XMWD20
EER31800 A9XELC10 Smartlink SI D PowerTag Link HD
A9XMWA20 A9XMWD100
PowerTag Energy F160
LV434021
LV434022
LV434023
Reference Numbers
compatibility* B
Concentrators / gateways
C
A9MEM1580
G
LV434021
LV434022
I
LV434023
A9MEM1591
A9MEM1592
A9MEM1593
< >
se.com/au Life is On | Schneider Electric | E-91
Switchboard Manufacturers
Wireless Products
General Overview
PowerTag Control monitors circuits wirelessly, collecting status of daisy-chained circuit breakers and notifying the A
data concentrator of information status, such as OF, SD, Contractor or Impulse Relay position indication. These wire-
less input/ output modules allow circuit control and status monitoring. Designed for use in commercial and building
applications, they quickly and easily turn your distribution board into a connected panel. B
PowerTag Control also connects to pulse relays or contactors for remote control within a building management system for non- C
critical loads, such as lighting.
Applications: D
• Monitors your electrical installation from main incomer down to load level
• Suitable for various business, buildings, industrial and residential applications with easy integration in upper systems E
• Supports and enables Energy efficiency programs and standards such as:
I
A9XMC2D3
< >
se.com/au Life is On | Schneider Electric | E-93
Switchboard Manufacturers
Technical specifications
Main characteristics
Power supply 230 V AC ± 20%
DB123309
Frequency 50/60 Hz
Maximum consumption IO y 2 VA
2DI y 3 VA
Operating temperature -25°C to +60°C
Storage temperature -40°C to +85°C
Clip on DIN rail 35 mm
Relative humidity (60068-2-78) 93 % at 40°C
Overvoltage category As per IEC 61010-1 Cat. III
E Altitude y 2000 m
Pollution degree 3
DB123311
closed (3)
Applicable voltage on output 230 V AC ± 20%
Minimum/maximum current on output 10 mA / 2 A
Type of output order Pulse or latch (3)
Pulse length in control mode with impulse relay Nominal: 300 ms
Radio-frequency communication
ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz
Channels As per IEEE 802.15.4 11 to 26
Isotropic Radiated Power Equivalent (EIRP) 0 dBm
Channel occupancy Messages sent b On event
b Periodically (5s nominal)
Dimensions (mm) 62
18 44 62
18 44 PowerTag C
DB429445
PowerTag C IO 230 V 80
85 45
85 45
PowerTag C 2DI 230 V 75
85 45
85 45
14mm
PZ2
6.5mm
Power supply 2 N.m 1 to 16 mm2 (AWG: 18...6) 0.5 to 10 mm2 (AWG: 21...8) -
(Top)
Input/Output 1 N.m 1x: 1 to 6 mm2 (AWG: 18...10) 1x: 0.5 to 4 mm2 (AWG: 1x: 0.5 to 4 mm2 (AWG:
(Bottom) 21...12) 21...12)
2x: 1.5 to 2.5 mm (AWG:
2
A
PowerTag C IO module
B
DB430239
C
• Compatible with horizontal comb
busbars 9mm modules
• Assembly and disassembly by
• Automatic cable guiding in the correct operating toggle latches at the top D
position: terminals with guard and bottom of the products
E
Status LED
A9XMC1D3
H
DB430241
Logo
• Wireless communication device
Push button
• Local output control
• Decommissioning
Monitoring/Backloop circuit
• "I" digital input terminal
DB430238
Control circuit
• Logical output relay
• "O" output terminals 230 V AC - 2 A max.
< >
se.com/au Life is On | Schneider Electric | E-95
Switchboard Manufacturers
DB430243
• Compatible with horizontal comb
busbars 9mm modules
• Assembly and disassembly by
• Automatic cable guiding in the correct operating toggle latches at the top
position: terminals with guard and bottom of the products
E
Status LED
A9XMC2D3
DB430245
Logo
• Wireless communication device
Monitoring circuits
• "I" digital input terminal
• "C" common powered terminal 230 V AC
PowerLogic™ HeatTag
General Overview
Electrical fires generate huge losses in commercial and industrial buildings, interrupting production D
and delaying service delivery. These losses can be prevented if early detection of component over-
heating is accurately detected and alarmed.
E
PowerLogic HeatTag helps prevent electrical cabinets from being damaged by analyzing airborne gas
and particles and sending alerts before smoke appears or an electrical fire starts. HeatTag is much
more than a fire or smoke detector - it scientifically detects overheating in electrical installations before F
any damage is done.
I
PB120568
< >
se.com/au Life is On | Schneider Electric | E-97
Switchboard Manufacturers
PowerLogic™ HeatTag
Functions and characteristics
Benefits
Conformity of standards
E System integrators’ benefit
• IEC/UL 61010-1
• Ease of integration
• IEC 61010-2-201
• Ease of setup
• IEC 61326-1
• Cost effectiveness
• IEC61326-2-3
• Seamless integration with EcoStruxure™ solutions
• ETSI EN 301 489-1
• ETSI EN 301 489-17
Panel builders’ benefit
• ETSI EN 300 328
• No settings
• EN 62311
• Nominal environment auto-learning to avoid false alerts
• EN IEC 63000
• Concentrator auto-discovery
• IEEE 802.15.4 protocol
• Alerts generated by a powerful algorithm integrated in HeatTag
• FCC and IC certified
Competitive advantages
• Easy to install and operate
• Suitable for non forced ventilated cabinets ≥ IP31
• Immediately detects overheating in cables and connections
• More than a smoke detector or heat sensor
• 3 levels of alert recording
• Monitors air quality index
• Continous improvements of algorithms
A
Sensor Characteristics
Temperature measurement Measurement range -15 °C / +70 °C (5 °F to 158 °F)
B
PB120568
Weight 270 g
Degree of protection (IEC 60529) IP 20
Electrical Characteristics
Supply voltage 110–277 V AC, -15 % / +15 % G
Frequency 50–60 Hz
Max. consumption 0.1 A
Operating temperature -15 °C / +70 °C (5 °F to 158 °F) H
Storage temperature -20 °C / +85 °C (-4 °F to 185 °F)
HeatTag rear view showing fan
Relative humidity in operation 15–90 %
Altitude of use 0–2000 m (0–6500 ft) I
Degree of pollution (IEC 60664-1) 3
Overvoltage category OVC III
Commercial Reference Number
PB120570
Q1
110–277
V~
2A
C Curve or Fast-acting fuse
NOTE: Do not use HeatTag as a safety device or to replace fire protection devices. Please see the appropriate User Guide for this product.
< >
se.com/au Life is On | Schneider Electric | E-99
Switchboard Manufacturers
PowerLogic™ PM5000
PowerLogic™ PM5350
PM5000 Series
General Overview
The PowerLogic PM5000 series power meters are the new benchmark in affordable,
precision metering. A
The value you want, the precision you need. Compact, affordable power meters with high-end cost
capabilities and basic mobile energy management. B
Applications C
F
Also ideal for electrical network management:
• Track real-time power conditions
G
• Monitor control functions
• Provide basic power quality values
H
• Detect and capture voltage sag and swell events
• Monitor residual current
I
• Analyze equipment and network status
• BACnet/IP, EtherNet/IP, and DNP3.0 protocol support
PB118061
METSEPM5760
< >
se.com/au Life is On | Schneider Electric | E-101
Switchboard Manufacturers
PM5000 Series
Functions and characteristics
Competitive advantages
• Easy to install and operate
• Easy for circuit breaker monitoring and control
• Data logging up to 16 parameters
• Power quality analysis
• Load management combined with alarm and timestamping
• High performance and accuracy
• Residual Current Monitoring
• Voltage sag and swell detection with waveform capture
• MID ready compliance for legal billing application
• BACnet/IP, EtherNet/IP, and DNP3.0 protocol support
icons and graphics create a friendly environment to learn about your electrical network. Ethernet gateway and D
enhanced cyber security. These are highly accurate devices with global billing certifications.
Applications E
Cost management: Cost saving opportunities become clear once you understand how and when your facility
uses electricity. The PowerLogic™ PM5000 series meters are ideal for:
• Sub-billing / tenant metering: allows a landlord, property management firm, condominium association, home-
F
owners association, or other multi-tenant property to bill tenants for individual measured utility (electricity)
PowerLogicTM PM5563
remote display usage. MID approved meters for billing applications across Europe.
G
• Cost allocation: allocate energy costs between different departments (HVAC, indoor and outdoor lighting,
refrigeration, etc.), different parts of an industrial process or different cost centres. Cost allocation systems can
help you save money by making changes to your operation, better maintaining your equipment, taking advan-
H
tage of pricing fluctuations, and managing your demand.
Network management: Improving reliability of the electrical network is key for success in any business.
Monitoring values such as voltage levels, harmonics distortions, voltage unbalance, residual current, voltage sag I
and swell will help you to ensure proper operation and maintenance of your electrical network and equipment.
PowerLogic™ PM5000 series meters are the perfect tool for:
• Basic Power Quality monitoring: power quality phenomena can cause undesirable effects such as heating in
transformers, capacitors, motors, generators and misoperation of electronic equipment and protection devices.
• Min/Max monitoring (with timestamp): understanding when electrical parameters, such as voltage, current
and power demand, reach maximum and minimum values will give you the insight to correctly maintain your
electrical network and assure equipment will not be damaged.
PB111784
• Alarming: alarms help you to be aware of any abnormal behaviour on the electrical network in the moment it
happens.
• WAGES monitoring: take advantage of the input metering on PM5000 meters to integrate measurements from
third party devices such as water, air, gas, electricity or steam, meters.
• Residual current monitoring: measures leakage current flowing in TN & TT network system.
• Voltage sags and swells: measures and captures wave form in the event of voltage sags and swells in the network.
PowerLogicTM PM5563
remote display Main characteristics
Easy to install
Mounts using two clips, in standard cut out for DIN 96 x 96 mm, no tools required. Compact meter with 72 mm
(77 mm for PM5500) depth connectable up to 690 V L-L without voltage transformers for installations compliant
with category III. Optional remote display (PM5563). Ethernet gateway functionality via RS-485 port.
Easy to operate
Intuitive navigation with self-guided, language selectable menus, six lines, four concurrent values. Two LEDs on
the meter face help the user confirm normal operation with a green LED - heartbeat/communications indicator,
and the amber LED - customizable either for alarms or energy pulse outputs. Onboard web pages (PM5500)
show real-time and logged information, and verify communications.
Easy circuit breaker monitoring and control
The PM5300 provides two relay outputs (high performance Form A type) with capability to command most of
the circuit breaker coils directly. For Digital Inputs, monitored switches can be wired directly to the meter without
external power supply by using whetting output voltage.
PM5500 series have 4 status inputs (digital) and 2 digital output (solid state) to use for WAGES monitoring,
control and alarm annunciation.
Accurate energy measurement for precise cost allocation:
PM5100 PM5300 PM5500 PM5600 PM5700
IEC 62053-22 (Active Energy) Class 0.5S Class 0.5S Class 0.2S Class 0.2S Class 0.2S
< >
se.com/au Life is On | Schneider Electric | E-103
Switchboard Manufacturers
PM5000 Series
Functions and characteristics
systems).
The PM55/PM56/PM5700 series has been tested and certified in accordance with
BACnet Testing Laboratories (BTL) requirements.
These types of power quality parameters help to identify the source of harmonics
that can harm transformers, capacitors, generators, motors and electronic equipment.
PB111772
Load management
Peak demands with time stamping are provided. Predicted demand values can be used in combination
with alarms for basic load shedding applications.
Alarms can be visualized as Active (the ones that have picked up and did not drop out yet) or Historical (the
ones that happened in the past). Alarms can be programmed and combined to trigger digital outputs and
PB111768
Load timer
A load timer can be set to count load running hours based on a minimum current withdraw, adjustable to
monitor and advise maintenance requirements on the load.
PowerLogicTM PM5100 meter
High Performance and accuracy
IEC 61557-12 Performance measuring and monitoring devices (PMD).
Defines the performance expectation based on classes. It defines the allowable error in the class for real and
reactive power and energy, frequency, current, voltage, power factor, voltage unbalance, voltage and current
harmonics (odds), voltage THD, current THD, as well as ratings for temperature, relative humidity, altitude,
start-up current and safety. It makes compliant meters readings comparable - they will measure the same
values when connected to the same load.
Meets IEC 61557-12 PMD/[SD|SS]/K70/0.5 for PM5100 and PM5300 Meets IEC 61557-12 PMD/[SD|SS]/
K70/0.2 for PM5500
Harmonics, individual (odd) up to 15th 15th 31st 31st 31st 31st 31st 31st I
Waveform capture & sag/ swell
– – – – – – – –
detection
I/Os and relays
I/Os 1DO 1DO 2DI/2DO 2DI/2DO 2DI/2DO 2DI/2DO 2DI/2DO 2DI/2DO
Relays 0 0 0 0 0 0 2 2
Analog inputs – – – – – – – –
Memory for data logging – – 256KB 256KB 256KB 256KB 256KB 256KB
Communications
Serial ports with modbus pro- – 1 1 1 – – 1 –
tocol
Ethernet port with Modbus TCP – – – – 1 1 – 1
protocol
BACnet/IP protocol – – – – –
EtherNet/IP protocol – – – – – – – –
Short ref. numbers PM5100 PM5110 PM5310 PM5310R PM5320 PM5320R PM5330 PM5340
< >
se.com/au Life is On | Schneider Electric | E-105
Switchboard Manufacturers
PM5000 Series
Functions and characteristics
Relays 0 0 0 0 0 0 0 0
Analog inputs 0 0 0 2 0 0 0 0
EtherNet/IP protocol
< >
se.com/au Life is On | Schneider Electric | E-107
Switchboard Manufacturers
PM5000 Series
Functions and characteristics
Active Energy Class 0.5S as per IEC 62053-22 Class 0.2S as per IEC 62053-22
Reactive Energy Class 2 as per IEC 62053-23 Class 2 as per IEC 62053-23
Active Power Class 0.5 as per IEC 61557-12 Class 0.2 as per IEC 61557-12
Frequency ±0.005 %
Frequency 45 to 65 Hz
80 mS typical at 120V AC and maximum
burden. 35 ms typical at 120 V L-N and
100 mS typical at 230 V AC and maximum maximum burden
Ride-through time
burden 129 ms typical at 230 V L-N and
100 mS typical at 415 V AC and maximum maximum burden
burden
DC control power Operating range 125–250 V DC ±20 % (100 to 300 V DC)
IP degree of protection (IEC 60529) IP54 front display, IP30 rear side, IP65 front side with Optional accessory kit METSEIP65OP96X96FF.
Dimensions W x H x D [protrusion from cabinet] 96 x 96 x 72 mm (77 mm for PM5500) (depth of meter from housing mounting flange) [13 mm]
< >
se.com/au Life is On | Schneider Electric | E-109
Switchboard Manufacturers
PM5000 Series
Functions and characteristics
Pollution degree 2
Safety
Europe CE, as per IEC 61010-1 Ed. 3, IEC 62052-11 & IEC 61557-12
Measurement category (Voltage & Current inputs) CAT III up to 400 V L-N / 690 V L-L
Communication
RS-485 port Modbus RTU, Modbus ASCII (7 or 8 2-Wire, 9600,19200 or 38400 baud, Parity - Even, Odd, None, 1 stop bit if parity
bit), JBUS Odd or Even, 2 stop bits if None; (Optional in PM51x and PM53x)
2 (daisy chain only, 1 IP
Ethernet port: 10/100 Mbps; Modbus TCP/IP 1 Optional address)
Native Ethernet/IP & DNP3.0 over Ethernet Yes
Firmware and language file update Meter firmware update via the communication ports
Keypad 4-button
B
PB111276m
I
PB111279_m
PB111289
PB111279A
PB111277
PB111291
PM5000
PM5000 meter parts PM5500 / PM5600 meter parts PM5100 / PM5300 meter parts
A. Menu selection buttons E. Voltage inputs E. Relay output (PM5300 only)
B. LED indicators F. RS-485 comms F. Voltage inputs
C. Navigation or menu selections G. Digital inputs G. Control power
D. Maintenance and alarm - H. Current inputs H. Current inputs
Please see the appropriate Installation Guide for accurate and complete information on the installation of this product.
< >
se.com/au Life is On | Schneider Electric | E-111
Switchboard Manufacturers
PM5000 Series
Reference Numbers
METSEPM5310 Power Meter range 72 mm depth, control power to 415 V AC, Cl 0.5S, 31st harmonic, 256 kB, RS-485 Modbus, 2DI/2DO
METSEPM5310R Power Meter range 72 mm depth, control power to 415 V AC, Cl 0.5S, 31st harmonic, 256 kB, RJ45 LVCT, RS-485 Modbus, 2DI/2DO
METSEPM5320 Power Meter range 72 mm depth, control power to 415 V AC, Cl 0.5S, 31st harmonic, 256 kB, Ethernet, 2DI/2DO
METSEPM5320R Power Meter range 72 mm depth, control power to 415 V AC, Cl 0.5S, 31st harmonic, 256 kB, RJ45 LVCT, Ethernet, 2DI/2DO
METSEPM5330 Power Meter range 72 mm depth, control power to 415 V AC, Cl 0.5S, 31st harmonic, 256 kB, RS-485 Modbus, 2DI/2DO, 2Relay
METSEPM5340 Power Meter range 72 mm depth, control power to 415 V AC, Cl 0.5S, 31st harmonic, 256 kB, Ethernet, 2DI/2DO, 2Relay
E METSEPM5560 Power Meter range 77 mm depth, control power to 480 V AC, Cl 0.2S, 63rd harmonic, 1.1 MB, Modbus and Ethernet, 4DI/2DO
METSEPM5563 Power Meter range 77 mm depth, control power to 480 V AC, Cl 0.2S, 63rd harmonic, 1.1 MB, DIN mount, no display, 4DI/2DO
METSEPM5563RD Power Meter range 77 mm depth, control power to 480 V AC, Cl 0.2S, 63rd harmonic, 1.1 MB, DIN mount, remote display, 4DI/2DO
METSEPM5580 Power Meter range 77 mm depth, control power 24-60 VDC, Cl 0.2S, 63rd harmonic, 1.1 MB, Modbus and Ethernet, 4DI/2DO
Reference Numbers
Cables
DCEPCURJ03GYM Category 5e, Patch Cord, UTP, 3 M, Grey
< >
se.com/au Life is On | Schneider Electric | E-113
Switchboard Manufacturers
PowerLogic™ PM5350
General Overview
The PowerLogic PM5350 power meter is the new benchmark in affordable, precision metering.
The PowerLogic PM5350 power meter offers all the measurement capabilities required to monitor an electrical installation in a
space-efficient, single 96 x 96 mm unit with small depth. DNC certifies for marine applications.
Applications
• Panel instrumentation.
• Cost allocation or energy management
• Electrical installation remote monitoring
E • Sophisticated alarming
• Circuit beaker monitoring and control
PB117510
METSEPM5350P
• Ease of use
• Precision metering & sub-billing
• Billing flexibility
• Comprehensive, consistent and superior performance
Competitive advantages
• Easy to install and operate
• Easy for circuit breaker monitoring and control
• Power quality analysis
• Load management combined with alarm and timestamping
• High performance and accuracy
• Mulit-tariff capabilities
• Individual harmonics up to the 31st
< >
se.com/au Life is On | Schneider Electric | E-115
Switchboard Manufacturers
PowerLogic™ PM5350
Functions and characteristics
The PowerLogic PM5350 series power meter soffer electrical installation measurement
capabilities in a single 96 x 96 mm unit. Three-phases and neutral can be monitored
simultaneously using a bright, anti-glare display with large characters and
backlighting. Menus are intuitive and the meter supports English, Chinese, Hebrew,
PB117511
and Spanish languages. Its compact size and high performance make the PowerLogic
PM5350 sereis suitable for many applications.
Applications
• Panel instrumentation.
• Cost allocation or energy management.
• Electrical installation remote monitoring.
• Alarming with under/over, digital status, control power interruption, meter reset,
E self diagnostic issue.
• Circuit Breaker monitoring and control with relay outputs and whetted digital
inputs.
Main characteristics
• Easy to install
Front display of PowerLogic PM5350P front display
Mounts using two clips, no tools required. Ultra compact meter with 44 mm depth
connectable up to 480 V L-L without voltage transformers for installations compli-
ant with category III, as per IEC 61010-1. See specification table for UL voltage
limits.
PB117512
• Easy to operate
Intuitive navigation with self-guided, language selectable menus, six lines, four
concurrent values. Two LEDs help confirm normal operation.
• Peak demands with Timestamping are provided. Predicted demand values can be
used in basic load shedding applications.
• Alarming with timestamping
• Over 30 alarm conditions, such as under/over conditions, digital input changes,
and phase unbalance inform you of events. A time-stamped log maintains a
record of the last 40 alarm events.
• Load timer setpoint adjustable to monitor and advise maintenance requirements.
• Performance Standard Meets IEC 61557-12 PMD/Sx/K70/0.5.
A
PE86279
PE86275
B
G
For detailed installation instructions see the product's Installation Guide.
H
I
PE113626
PB113626
< >
se.com/au Life is On | Schneider Electric | E-117
Switchboard Manufacturers
Multi-circuit Metering
General Overview
PowerLogic™ HDPM6000
PowerLogic™ BCPM
This is an integrated solution for monitoring multi-circuits and mains by
using a single meter. The meter is designed for use in both new build and
retrofit and is used for critical power operations in data centers and energy
management in buildings.
The ideal solution for data center managers, energy or facility managers,
engineers and operational executives who are responsible for delivering
power to critical applications.
In corporate and hosted data center facilities, this technology helps you
plan and optimise the critical power infrastructure to meet the demands of
continuous availability
BCPMA084S
General Overview
HDPM6000 panelboard metering solutions are intended for new construction when energy
and power quality monitoring is required down to the branch-circuit level. They are well-suited
for panelboards, power distribution units (PDUs) and remote power panels (RPPs).
The HDPM6000 head unit measures 3-phase power feeding the panelboard, and the
metering modules measure power on all the outgoing branch circuits. The head unit is
mounted beside the main breaker, connected to instrument current transformers (CTs)
installed on each phase of the main incoming circuit.
Panelboard metering modules are mounted vertically beside branch-circuit breakers and
are connected to CTs installed on each branch-circuit via click-in connectors. HDPM6000
panelboard metering modules have two Ethernet ports for connecting to other metering
modules.
Each HDPM6000 head unit can support a daisy-chain up to 8 (4 pairs) panelboard metering
modules for a total of 168 circuits.
< >
se.com/au Life is On | Schneider Electric | E-119
Switchboard Manufacturers
Multi-circuit Metering
General Overview
< >
se.com/au Life is On | Schneider Electric | E-121
Switchboard Manufacturers
Switchboard configuration
HDPM6000 head unit
The HDPM6000 head unit serves as a stand-alone 3-phase power quality meter and the foundational unit for the entire
HDPM6000 range of devices. With 1% accuracy, THD metrics and waveform capture, the meter helps monitor and manage
critical circuits with greater reliability. CTs can be added or removed after the system is deployed and are available in any size
from 20A to 4000A (250mV rating).*
* Contact your Schneider Electric sales representative for ratings above 4000A
E
HDPM6000R HDPM6000S
• Retrofit or new installations • Perfect for new installations
• 24, 42 or 84 circuit modules; up to 192 circuits • 21 circuits per strip; maximum of eight strips connected to
• Metering system parameters: V, I, PF, kW, kWh, kVAr, one HDPM6000 head unit
kVArh, kVA, kVAh, THDv, THDi • Metering system parameters: V, I, PF, kW, kWh, kVAr, kVArh,
• Voltage and current waveform capture (optional) kVA, kVAh, THDv, THDi
• Voltage and current waveform capture (optional)
HDPM6000S HDPM6000S
Panelboard 1 Panelboard 2
Panelboard 1 Panelboard 2
General Overview
< >
se.com/au Life is On | Schneider Electric | E-123
Switchboard Manufacturers
Busway configuration
Modular and distributed design suitable for large and critical applications
The PowerLogic™ HDPM6000 sets a new standard for Power Quality Meters as both a standalone three-phase PQM and the
foundation for an entire suite of devices: HDPM6000R, HDPM6000S, and HDPM6000B
A
The HDPM6000 is both a standalone 3-phase power quality meter (PQM) and the hub for Schneider Electric’s branch circuit B
accessory modules (HDPM6000R, HDPM6000S, HDPM6000B). It can monitor loads up to 4000 A with utility grade system
accuracy, delivers a complete range of power quality metrics (vTHD, iTHD), and provides waveform capture functionality without
the need for additional proprietary software. The HDPM6000 can also maintain multiple, concurrent sessions with EPMS, DCIM
C
or BMS applications via the Modbus, SNMP and BACnet IP protocols. Dual Ethernet ports allow multiple HDPM6000 head units
to be daisy-chained in a single run. D
Thanks to open protocols, the HDPM6000 is easily integrated into any data center or building management information system.
Gateways or additional hardware are not required and the platform offers most standard forms E
of data connectivity. The on-board environmental communications port enables one-wire sensors to detect abnormal
temperature and humidity conditions so adjustments can be made before problems occur.
F
Applications
Ideal for large critical and non-critical building applications such as data centers, industrial facilities, infrastructure and other G
similar environments.connectivity.
I
PB120560
< >
se.com/au Life is On | Schneider Electric | E-125
Switchboard Manufacturers
Benefits
E
• Modular platform approach provides scalability and minimizes integration Standards
costs, start up time and operational expenses.
• EN 55011/CISPR11
• Provides power quality metrics down to the branch circuit allowing users to
• EN 61326-1
effectively monitor circuit loads, manage power consumption, allocate energy
costs and maximize uptime across their facilities. • IEC 61000-4-2
• Makes energy and power quality data immediately actionable and relevant to • IEC 61000-4-3
operational and sustainability goals • IEC 61000-4-4
• IEC 61000-4-5
Competitive advantages • IEC 61000-4-6
• IEC 61000-4-11
• Asset management
- Identify increased harmonics in the rack servers to detect a potential • IEC 61010-1
disruption • IEC 61010-030
- Total Harmonics Distortion • UL. 61010-1
- Waveform capture
• UL 61010-2-030
• Display and web page visualization
- Optional touchscreen display accesses meter data
- User-friendly web interface allows configuration of branch circuits and
commissioning of meter system
• Data logging and software monitoring
- Data logging and on-board memory storage
- EcoStruxure™ PME and PSO integration
Measurements
A
• Current per branch and sum of all phases
PB120553
Features Guide G
Power quality analytics Waveform capture and voltage and current THD
Electrical characteristics
Environmental characteristics
Operating temperature -20 to 60 °C
< >
se.com/au Life is On | Schneider Electric | E-127
Switchboard Manufacturers
HDPM6000 Enclosure
PowerLogic™ HDPM6000 Enclosure Size Options
PB120557
PB120558
E
PowerLogic™ HDPM6000 large size enclosure PowerLogic™ HDPM6000 medium size enclosure
PB120559
PB120553
7.84”
(199.14 mm)
PB120556
< >
se.com/au Life is On | Schneider Electric | E-129
Switchboard Manufacturers
PowerLogic™ BCPM
General Overview
The PowerLogic BCPM is a highly accurate, full-featured metering product designed for the unique, multi-circuit and
minimal space requirements of a high-performance power distribution unit (PDU) or remote power panel (RPP).
It offers class 1 (1 %) power and energy system accuracy (including 50 A or 100 A CTs) on all branch channels. The BCPM
monitors up to 84 branch circuits and the incoming power mains to provide information on a complete PDU. Full alarming
capabilities ensure that potential issues are dealt with before they become problems.
Applications
• Maximise uptime and avoid outages
• Optimise existing infrastructure
E • Improve power distribution efficiency
• Track usage and allocate energy costs
• Enable accurate sub-metering
BCPMA084S
< >
se.com/au Life is On | Schneider Electric | E-131
Switchboard Manufacturers
PowerLogic™ BCPM
General Overview
Main characteristics
• Monitor up to 84 branch circuits with a single BCPM.
PE86281
• Retrofit projects:
BCPMSC with split-core CTs is ideal for retrofits. Any number of split-
E core CTs, up to 84 maximum, can be installed with a single BCPM.
Three sizes of CT are supported (50 A, 100 A, and 200 A) and all
three CT sizes can be used on a single BCPM. Adapter boards with
terminals for split-core CTs can be mounted using DIN-rail, Snaptrack
or on a common mounting plate with the main board (42 ch Y63
models only).
PB113664
Branch Power and Energy measurements fully meet ANSI and IEC
class 1 accuracy require
PB113645
PB113648
Lowers your total installation costs as well as the cost per meter point
by supporting both new and retrofit installations.
Easily turn the large amount of data collected by the devices into
useful decision-making information.
A
PE86167
Use on LV systems
B
Power and energy measurements
Mains C
Branch circuits
Current
RS-485 port
Modbus RTU RTU
Modbus TCP 1g
BACnet IP 1g
BACnet MS/TP 1g
SNMP protocol 1g
Ethernet Port 1g
< >
se.com/au Life is On | Schneider Electric | E-133
Switchboard Manufacturers
PowerLogic™ BCPM
General Overview
2 18 mm CT spacing
PB113664
*The BCPMSC models with 1, 2 or Y63 as the number of circuits DO NOT INCLUDE ANY branch
CTs or ribbon cables (they include only the Main board and adapater board assemblies). These
models are provided to allow users to order a specific combination of CT quantities, CT sizes, CT
lead lengths and ribbon cable styles and lengths. The CTs and cables must be ordered separately.
The PowerLogic BCPMSC uses .333 V AC output split-core CTs for the auxiliary inputs. These CTs are
PB113730
< >
se.com/au Life is On | Schneider Electric | E-135
Switchboard Manufacturers
PowerLogic™ BCPM
Reference Numbers
Commercial Description
ref. no.
BCPMA042S 42-circuit solid core power & energy meter, 100 A CTs (2 strips), 19 mm spacing
BCPMA084S 84-circuit solid core power & energy meter, 100 A CTs (4 strips), 19 mm spacing
BCPMA142S 42-circuit solid core power & energy meter, 100 A CTs (2 strips), 25 mm spacing
Flat ribbon cable BCPMA184S 84-circuit solid core power & energy meter, 100 A CTs (4 strips), 25 mm spacing
BCPMA224S 24-circuit solid core power & energy meter, 100 A CTs (2 strips), 18 mm spacing
E BCPMA236S 36-circuit solid core power & energy meter, 100 A CTs (2 strips), 18 mm spacing
BCPMA242S 42-circuit solid core power & energy meter, 100 A CTs (2 strips), 18 mm spacing
CBL016 BCPMA248S 48-circuit solid core power & energy meter, 100 A CTs (4 strips), 18 mm spacing
BCPMA272S 72-circuit solid core power & energy meter, 100 A CTs (4 strips), 18 mm spacing
BCPMA284S 84-circuit solid core power & energy meter, 100 A CTs (4 strips), 18 mm spacing
PB113650
BCPME042S 42-circuit solid core power & energy meter w/Ethernet, 100 A CTs (2 strips), 19 mm spacing
BCPME084S 84-circuit solid core power & energy meter w/Ethernet, 100 A CTs (4 strips), 19 mm spacing
BCPME142S 42-circuit solid core power & energy meter w/Ethernet, 100 A CTs (2 strips), 25 mm spacing
BCPME184S 84-circuit solid core power & energy meter w/Ethernet, 100 A CTs (4 strips), 25 mm spacing
Round ribbon cable
BCPME224S 24-circuit solid core power & energy meter w/Ethernet, 100 A CTs (2 strips), 18 mm spacing
BCPME236S 36-circuit solid core power & energy meter w/Ethernet, 100 A CTs (2 strips), 18 mm spacing
BCPME242S 42-circuit solid core power & energy meter w/Ethernet, 100 A CTs (2 strips), 18 mm spacing
BCPME248S 48-circuit solid core power & energy meter w/Ethernet, 100 A CTs (4 strips), 18 mm spacing
CBL022
BCPME272S 72-circuit solid core power & energy meter w/Ethernet, 100 A CTs (4 strips), 18 mm spacing
BCPME284S 84-circuit solid core power & energy meter w/Ethernet, 100 A CTs (4 strips), 18 mm spacing
Reference Numbers
Commercial Description
ref. no. B
BCPMSCA1S 42-circuit split-core power and energy meter, CTs and cables sold separately
BCPMSCA2S 84-circuit split-core power and energy meter, CTs and cables sold separately
C
BCPMSCA1S
BCPMSCA30S 30-circuit split-core power and energy meter, (30) 50 A CTs & (2) 1.2 m cables
D
BCPMSCxY63S 42-circuit split-core models BCPMSCA42S 42-circuit split-core power and energy meter, (42) 50 A CTs & (2) 1.2 m cables
come with the main board, (2) adapter boards
and ribbon cables all mounted on a backplate, E
to simplify installation. BCPMSCA60S 60-circuit split-core power and energy meter, (60) 50 A CTs & (4) 1.2 m cables
BCPMSCAY63S 42-circuit split-core power and energy meter, all boards on backplate, CTs and cables
sold separately
F
PE86183
BCPMSCA84S 84-circuit split-core power and energy meter, with (84) 50 A CTs & (4) 1.2 m cables
G
BCPMSCE1S 42-circuit split-core power and energy meter w/Ethernet, CTs and cables sold separately
BCPMSCE2S 84-circuit split-core power and energy meter w/Ethernet, CTs and cables sold separately H
BCPMSCE30S 30-circuit split-core power and energy meter w/Ethernet, (30) 50 A CTs & (2) 1.2 m
cables
I
BCPMSCE42S 42-circuit split-core power and energy meter w/Ethernet, (42) 50 A CTs & (2) 1.2 m
cables
LVCT00050S
BCPMSCE60S 60-circuit split-core power and energy meter w/Ethernet, (60) 50 A CTs & (4) 1.2 m
PowerLogicTM LVCT0xxxxS Split-core Low- cables
voltage (1/3V) CTs for Aux inputs (Mains) are
ideal for retrofit applications BCPMSCE84S 84-circuit split-core power and energy meter w/Ethernet, (84) 50 A CTs & (4) 1.2 m
cables
The PowerLogicTM BCPM uses .333 V AC output split-core CTs for the auxiliary inputs. These CTs are
ordered separately from the BCPM.
PB113652
PB113657
PB113658
LVCT20050S
< >
se.com/au Life is On | Schneider Electric | E-137
Switchboard Manufacturers
PowerLogic™ BCPM
Reference Numbers
BCPMREPAIR CT repair kit for solid core BCPM (includes one CT)
LVCT00101S 100 A 16 mm x 20 mm
LVCT00202S 200 A 32 mm x 32 mm
LVCT00102S 100 A 30 mm x 31 mm
LVCT00202S 200 A 30 mm x 31 mm
LVCT00302S 300 A 30 mm x 31 mm
LVCT00403S 400 A 62 mm x 73 mm
LVCT00603S 600 A 62 mm x 73 mm
LVCT00803S 800 A 62 mm x 73 mm
LVCT20100S 100 A 10 mm
LVCT20202S 200 A 25 mm
LVCT20403S 400 A 31 mm
Data update rate 1.8 seconds (Modbus), 14 seconds (BACnet) 20 sec (SNMP)
D
Input-voltage characteristics Measured voltage 150 – 480 V AC L-L (1)
Auxiliary CT Current Input Range 0-0.333V; CTs must be rated for use with Class 1 voltage inputs
Mechanical characteristics
G
Weight 1.5 kg
Safety
Europe IEC 61010
Communication
RS-485 (A/B/C models) Baud rate: DIP-switch selectable 9600, 19200, 38400
DIP-switch selectable 2-wire or 4-wire RS-485. Parity selectable: Even, Odd or None.
Baud rate: configured via Web-server. Baud selectable: 9600, 19200, 38400. Parity selectable:
RS-485 (A models) Even, Odd or None. 2-wire RS-485.
Ethernet (E models) 10/100 Mbit Ethernet. RJ-45 connection. Static IP or DHCP.
Modbus RTU on all models, BCPME models also support Modbus TCP, SNMP, BACnet IP & BACnet
Protocols MS/TP
Firmware characteristics
Detection of over-voltage/under- User-defined alarm thresholds for over-voltage and under-voltage detection
voltage
Four alarm levels: high-high, high, low and low-low (users define the setpoints for each). Each
Alarms alarm has a latching status to alert the operator that an alarm has previously occurred. High and
Low alarms have instantaneous status to let the operator know if the alarm state is still occurring.
Firmware Update Update via Modbus
< >
se.com/au Life is On | Schneider Electric | E-139
Switchboard Manufacturers
PowerLogic™ BCPM
Functions and characteristics
Electrical characteristics
1 % from 10 % to 100 % of rated current(LVCT0xxxx0S/1S/2S/3S/4S [split-core])
Accuracy
0.5 % from 5 % to 100 % of rated current (LVCT2xxxx0S/2S/3S [solid core])
Environmental conditions
E 0 ºC to 70 ºC (LVCT0xxxx0S/1S)
B
PE86286_m
PE862169
C
F
PowerLogic BCPM adapter board (one board per 21
split- core branch CTs)
G
I
PB113662
PB113661
< >
se.com/au Life is On | Schneider Electric | E-141
Switchboard Manufacturers
PowerLogic™ BCPM
Functions and characteristics
PB113659
PB113659
These dimensions apply to both BCPMSCCTxx (branch CTs) and
LVCT0xxxx0S/1S (for Mains) 50 A-200 A CT families.
Model L A B C D E
LVCT20050S 1.8 m 33 mm 38 mm 18 mm 21 mm 10 mm
LVCT20100S
LVCT20202S 1.8 m 59 mm 66 mm 18 mm 31 mm 25 mm
LVCT20403S 1.8 m 70 mm 82 mm 25 mm 36 mm 31 mm
B = 30 mm B = 73 mm B = 139 mm
C = 31 mm C = 62 mm C = 62 mm
D = 30 mm D = 30 mm D = 30 mm
E = 100 mm E = 132 mm E = 201 mm
F = 121 mm F = 151 mm F = 151 mm
F
BCPM PCB
I
PowerLogic BCPM with split-core CTs installation details
PE86287
< >
se.com/au Life is On | Schneider Electric | E-143
Switchboard Manufacturers
Retrofit products
General Overview
The advantages of using retrofit products throughout your power monitoring system are numerous and proven.
Whether you install these products as part of an upgrade or as add-on modules in a new build environment, ease
of installation and commissioning will reap huge economic benefits. The PowerLogic range is designed to retrofit
existing switchboards and enhance the energy efficiency of buildings for many years.
EM3555 series
The EM3555 DIN Rail Meter combines exceptional
performance and easy installation to deliver a cost-
effective solution for power monitoring applications.
Applications
Capable of essential cost management:
• Energy monitoring in building automation systems
• Renewable energy monitoring
PB105431
• Commercial sub-metering
• Energy management
• Industrial monitoring
• Accurate cost allocation
METSEEM3502
Competitive advantages
• DIN rail mounting option; easy installation
• Real energy output and phase loss alarm output
• 90-600 V AC; application versatility with fewer models to stock
• Bright backlit LCD; easy visibility in dark enclosures
• Data logging capability safeguard during power failures
• EM35xx models compatible with LVCTs from 5 A to 32000 A
• User-enabled password protection prevents tampering
• Native BACnet MS/TP support (no gateway)
< >
se.com/au Life is On | Schneider Electric | E-145
Switchboard Manufacturers
The data logging capability (EM3555) protects data in the event of a power failure.
Modbus, pulse output, and phase alarms are all provided to suit a wide variety of
applications. Additional pulse inputs provide an easy way to incorporate simple flow
sensors to track gas, water, steam, or other energy forms us- ing a BACnet system in
PB105431
The EM3555 models adds a bi-directional monitoring feature designed expressly for
renewable energy applications, allowing measurement of power imported from the
utility grid as well as power exported from the renewable energy source (e.g. solar
panels). In this way, a facility administrator track all energy data, ensuring accuracy in
billing and crediting.
E
• Features
PowerLogicTM EM3555 - All Models: A compact solution for panelboard monitoring
- DIN rail mounting option; easy installation
- IEC 62053-22 Class 0.2S for all 35xx models; great for cost allocation
- IEC 62053-22 Class 0.5S for EM35xxA models
- Real energy output and phase loss alarm output; one device serves multiple
PB113727
applications
- 90-600 VAC; application versatility with fewer models to stock
- Bright backlit LCD; easy visibility in dark enclosures
- Data logging capability EM3555; safeguard during power failures
- EM3555 models compatible with LVCTs from 5 A to 32000 A; wide range of
service types
- User-enabled password protection; prevents tampering
- System integration via Modbus EM3555, convenient compatibility with ......
existing systems
Mechanical characteristics
Mounting DIN Rail or 3-point screw mount
Environmental conditions
Operating tempera- -30 °C to 70 °C
ture Range
Storage Tempera- -40 °Cto 85°C
ture Range
Humidity Range <95 % RH non-condensing
Accessories
NEMA 4x enclosure (EM3500-ENC, pictured)
Split-core low voltage CTs (LVCTxx)
Fuse kits (EFP1, EFP2, EFP3)
Safety
US and Canada (cULus) UL508 (open type device)/CSA 22.2 No. 14-05
Europe (CE) EN61010-1:2001
Feature selection
Commercial reference number Model Description
METSEEM3555 EM3555 Modbus - 4 quadrant with logging
Diagnostic
Alert
Export
Import
Transmit Data
Receive Data
Receive Data Error
Numeric Data
< >
se.com/au Life is On | Schneider Electric | E-147
Switchboard Manufacturers
EM3555 dimensions
PB105420
PB10542
E
PB105439
< >
se.com/au Life is On | Schneider Electric | E-149
Switchboard Manufacturers
VigilOhm Insultation
Monitoring Devices
General Overview
PB118029
is isolated from the ground for an IT earthing system (also called
Ungrounded system).
C
This is applicable to both Low Voltage systems ( up to 1000VAC,
1500VDC) and medium Voltage (up to 63 kV on IMDs only) D
protections.
• For this reason, Insulation Monitoring Devices are used on IT
networks in order to detect a first insulation fault so that the fault
can be repaired; hence avoiding situations with several insulation
faults and maintaining the continuity of service on the network.
• Using an Insulation Fault Locator (IFL) allows the operator to
locate the fault in multiple feeders installations.
The Vigilohm catalog offers a range of products suitable for these various applications, from the
simplest insulation monitoring systems to the most advanced ones, including individual insulation
monitoring per feeder and communication with supervision.
< >
se.com/au Life is On | Schneider Electric | E-151
Switchboard Manufacturers
Vigilohm Range
Functions and characteristics
Toroids
Used along with the fault locators
< >
se.com/au Life is On | Schneider Electric | E-153
Switchboard Manufacturers
Vigilohm Range
Functions and characteristics
Voltage adaptor
Voltage transformer
E
PB118032
Medical staff is informed of electrical faults in the operating theater room through the local HMI
Technical staff is informed of any fault in the various operating theaters via a supervision system such as EcoStruxure Power
Monitoring Expert.
This range of products, dedicated to Medical premises, meets requirements from IEC61364-7-710. IMD and IFL are also “MED” certified, as they
meet their product standard:
Locator IMDIFL12H
< >
se.com/au Life is On | Schneider Electric | E-155
Switchboard Manufacturers
Vigilohm Range
Reference Numbers
50159 ZX impedance
50278 XRM
Reference Numbers
IMD-IM10-H IM10 H E
IMDIM15H IM15 H
IMD-IM20 IM20 F
IMD-IM20-1700 VoltaIge Adaptor for IM20
IMD-IM20-H IM20 H G
IMD-IM400 IM400
IMD-IM400C IM400C
I
IMDIM400L IM400L
IMDIM400LTHR IM400LTHR
IMDIM400THR IM400THR
IMD-IM9 IM9
IMD-IM9-OL IM9OL
< >
se.com/au Life is On | Schneider Electric | E-157
Switchboard Manufacturers
Electrical safety
E Panel Server is an integral part of Schneider Electric’s continuous thermal monitoring application, helping reduce risk of electrical fires, increase
people and assets protection. Implement the thermal monitoring of your electrical panel by connecting thermal and heat sensors to your Panel
Server.
Power availability
Electrical distribution monitoring and power event analysis help avoid unplanned downtime caused by electrical failure. Panel server collects real-
time data and alarms, presenting information through embedded webpages, making it available to edge control software or advisor for electrical
system diagnostics. Use embedded webpages for first-level monitoring or monitor from your edge control.
Cybersecurity
Guarding your electrical assets and systems against cyber attacks is vital. Panel server
is an IEC 62443 compliant device and is central to the IEC 62443-3-3 SL1 certified
EcoStruxure™ Power system. Use Cybersecurity Admin Expert to manage user
accounts, define your cybersecurity policy and retrieve security logs.
@ Improve cybersecurity
General Overview
All-in-one gateway
• Separates your OT network from your IT network
A
• Wireless data concentrator
• Modbus RS485 to Modbus TCP B
• Supports multiple Ethernet connections for serving information to edge
control software and cloud applications
C
Simple commissioning
• EcoStruxure Power Commission software
• Device auto discovery D
• Generation of acceptance reports to validate gateway configuration
• Commission via Bluetooth® or WiFi
E
Intuitive operation
• User-friendly webpages offer first-level monitoring F
• Contextualized data and operational insights
• Simple alarm setup for email notification
• Standardized IEC 62974-1 compliant datalogger and energy server G
I
Architecture overview
< >
se.com/au Life is On | Schneider Electric | E-159
Switchboard Manufacturers
Main features
• Power Supply 110…277 V AC/DC
• Designed to match with electrical switchboard environment (temperature, humidity
electromagnetic compatibility)
• One Ethernet 10Base-T/100Base-T port
• Wi-Fi
• Bluetooth communication for commissioning
DB410978
C US
Comm. Reference Description
LISTED PAS400 Panel Server Entry 110..277 V AC/DC
< >
se.com/au Life is On | Schneider Electric | E-161
Switchboard Manufacturers
40.0
mm
(inch) (1.57)
E Panel Server
PAS400
40.0
54
(1.57) 64.7
(2.12) (2.54)
70.2
(2.76)
C Bluetooth/Restart button
Please see the appropriate Installation Guide for accurate and complete information on the installation of this product.
Functions B
• An all-in-one gateway to retrieve data from both your IEEE 802.15.4 and Modbus
devices. C
• Connect to your monitoring and control software such as EcoStruxure™ Power
Monitoring Expert, EcoStruxure™ Power Operation or to your Building Management
System. D
• Connect to Schneider cloud applications such as Facility Expert or Asset Advisor.
• Ease of commissioning with EcoStruxure™ Power Commission software, enabling
device plug-and-play and auto-discovery features.
E
• Ease of operation with user friendly embedded webpages, and data contextualiza-
tion for more relevant analytics.
F
Main features
G
• Power Supply 24 V DC, 110..240 V AC/DC, 110…277 V AC/DC
• Designed to match demanding electrical switchboard environment (temperature,
humidity electromagnetic compatibility) H
DB410983
Compatible accessories
• Wi-Fi/Bluetooth external antenna (PASA-ANT1)
< >
se.com/au Life is On | Schneider Electric | E-163
Switchboard Manufacturers
C
mm 40.0
(1.57)
(inch)
D
Panel Server
PAS600L
E
45.5 85.0 104.2
93.0 (1.79) (3.34) (4.10)
(3.66)
F
40.0
G
72 (1.57) 64.7
(2.83) (2.54)
70.2 H
(2.76)
I
Panel Server Entry physical descriptions
B A G H G H L
A Power supply terminal block
C
Panel Server
PAS600L D Bluetooth/Restart button
D E QR code to product information
E
F RS-485 Modbus communication port
Wi-Fi
G Ethernet LED 1: Speed
antenna
ETH1 ETH2
L Grounding connection
Please see the appropriate Installation Guide for accurate and complete information on the installation of this product
< >
se.com/au Life is On | Schneider Electric | E-165
Switchboard Manufacturers
Main features
• Power Supply 24 V DC, 110…277 V AC/DC, PoE-PD (CLASS 0,IEEE802.3af/at)
• Designed to match demanding electrical switchboard environment (temperature,
humidity electromagnetic compatibility)
• Two Ethernet 10Base-T/100Base-T port (supporting switched or separated network
DB410992
topology)
• Wi-Fi
• Bluetooth communication for commissioning
Panel Server Advanced- Front ISO view
• Modbus RS-485 serial communication
• IEEE 802.15.4 wireless communication
• Modbus TCP/IP server and client
Standards & certifications • Support of HTTPS, NTP, SNTP, DHCP client and server with proxy management
• IEC 61010-1 Ed.2010 • Modbus RS-485 to Modbus/TCP Gateway
• UL 61010-1 Ed.2012 • Wireless devices concentrator to Modbus/TCP
• IEC 61974 • Two digital inputs (24 V DC version only) for contact information or WAGES pulse
• IEC 62443 meter
• Designed through a Secured Development Life Cycle in accordance to IEC 62443-4-1
• Commissioning through EcoStruxure™ Power Commission or though Embedded
Web-Pages
• Speed-up commissioning through device list import and configuration export to the
monitoring software
• Fully integrated in Cybersecurity Admin Expert tool for security settings (Role Base
C US
Access and other security features such enabling/disabling communication means)
LISTED • Embedded web server for real-time measurement and alarm visualization, energy &
power consumption by usage and location, 3 years historical trending and dash-
boarding
• 3 years Data Logger with 32 GB memory
• Customizable alarm with alarm log
• Alarms can be viewed in the web-pages and notified by e-mail
Compatible accessories
• Wi-Fi/Bluetooth external antenna (PASA-ANT1)
• IEEE 802.15.4 external antenna (PASA-ANT1)
PowerTag Energy & Ambient (1) 100 devices (2) 100 devices (2) 100 devices (2)
Other type of devices (1) 20 devices (2) 20 devices (2) 20 devices (2)
I
External IEEE 802.15.4 Antenna PASA-ANT1 PASA-ANT1 PASA-ANT1
Serial Ports
Modbus RS-485 Master Max. number of devices w/o repeater 32 devices 32 devices 32 devices
Max. number of devices with repeater 128 devices 128 devices 128 devices
Maximum Length 1000 m 1000 m 1000 m
Baudrate 1200, 4800, 9600, 19200, 38400, 57600, 115200
Functionality
Data Buffering for cloud applications 1 month 1 month 1 month
Data Logger and Web-Server Data Logging 3 years 3 years 3 years
Event logging Yes (2) Yes (2) Yes (2)
Simple Monitoring Web-Pages Yes Yes Yes
Monitoring Web-Pages with historical data Yes Yes Yes
Time Management RTC (with battery) Yes Yes Yes
TimeUpdate (NTP & SNTP) Yes Yes Yes
Digital inputs
Two DI WAGES & Dry-Contact Yes No No
Environmental
Protection Degree Front Face IP40 IP40 IP40
Others IP20 IP20 IP20
OverVoltage Category N.A. OVC III OVC III
Polution Degree 3 2 2
Temperature Operation -25 °C to +70 °C -25 °C to +70 °C -25 °C to +70 °C
Storage -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Altitude Max. 2000 m 2000 m 2000 m
Relative Humidity ≤ 93% ≤ 93% ≤ 93%
Mechanical
Form factor Acti9 Acti9 Acti9
Installation Din Rail Din Rail Din Rail
Width 72 mm 72 mm 72 mm
Weight TBC TBC TBC
Standard & Certification
Certifications CE, CULus, RCM, UKCA, FCC, IC
Standards IEC 61010-2, UL 61010-2, CSA C22.2, IEC 62974-1, IEC 62443-4-1, IEC 61326-1, EN
301-489, EN 55032, CISPR 11, EN 300-328, IEEE 802.15.4, IEEE 802.11 a/b/g/n
IEEE 802.3 af/at
(1) Consult the User Manual or other documentations to check the limit applicable to your wireless device.
(2) Lower limits may apply depending the firmware version, consult the User Manual, Release Notes or other documentations.
< >
se.com/au Life is On | Schneider Electric | E-167
Switchboard Manufacturers
40,0
1.57
E PAS800L
72 40,0
1.57 64,7
2.83 2.54
C
Panel Server
PAS800L E QR code to product information
D F RS-485 Modbus communication port
E G Ethernet LED 1: Speed
H Ethernet LED 2: Activity
Wi-Fi
antenna
I Wi-Fi external antenna port
ETH1 ETH2(PoE)
RS485
PAS800L only) / Ethernet 2 communication
port - PoE (PAS800P only)
I J K
L Grounding connection
M IEE802.15.4 external antenna port
Please see the appropriate Installation Guide for accurate and complete information on the installation of this product
Range
< >
se.com/au Life is On | Schneider Electric | E-169
Switchboard Manufacturers
Financial
• Penalties applied by most utilities for low power factor and higher maximum kVA demand
• Higher CO2 emissions
• Increased energy consumption within the installations
• Energy is wasted through additional losses
Proposed Assembly
50 2 x BLRCH339A407B48
E
25 40 BLRCH400A480B52
Proposed Assembly H
50 2 x BLRCH400A480B52
I
Note:
• Harmonic pollution on the distribution network can reduce capacitor life. Contact Schneider Electric for advice on
limiting the effect of harmonic pollution.
• Capacitors can absorb audio-frequency signals; rejection coils may be necessary if the power utility uses an
audio-frequency signalling system.
• Refer to Chapter 3 for type LC1D•K capacitor-switching contactors.
• For further information refer to the Reactive Energy Management Low Voltage Components - PFCED310003EN
• VarplusCan HDuty capacitors
116 ±1 + 5 90 ± 1 + 5
212 ± 3
116 ±
116 ±1 90 ±1
16 +1
M12
Toothed washer M12
16 +1
Tightening
15
Tightening Tightening
15
Torque = 12Nm
Torque = 2.5Nm Torque = 2.5Nm
15
15
47 ±1
< >
se.com/au Life is On | Schneider Electric | E-171
Switchboard Manufacturers
Dimensions
144 dimensions shown in mm
VarPlus Logic VL12 5.66
137
VarPlusLogic
5.39
98
3.85
VL12
144 137 47
5.66 5.39 1.85
ESC OK
12
0.47
59
2.32
Reference Numbers
I
Dimensions
Power restored by the Fixing centre distance (mm) Maximum Dimensions (mm) Weight (kg)
assembly reactor-capacitor
Normally closed H W D
dry contact
12.5 kVAr/400 V - 50Hz 205 x 110 230 245 140 10
25 kVAr/400 V - 50Hz 205 x 110 230 240 140 18
50 kVAr/400 V - 50Hz 205 x 120 or 205 x 130 270 260 160 27
< >
se.com/au Life is On | Schneider Electric | E-173
Switchboard Manufacturers
Dimensions
H W D1 D2 Weight (kg)
(mm) (mm) (mm) (mm)
E
VL6 / 12 144 144 59 47 0.6
RT6 / 8 / 12 143 143 67 57 1
H
138
138 D2
W D1
Combination Guide
VarPlus Can + Detuned Reactor + Contactor
Protection options
NSX circuit breakers
VARPACT Range A
Technical data
• capacitor rated voltage: 525 V & three-phase 50 Hz • ambient temperature around the capacitor bank
• tuning order: 3.8 (190 Hz) (electrical room): B
• capacitance value tolerance: -5, +10 % - maximum temperature: 40 °C
• insulation level: 0.69 kV withstand 50 Hz, 1 min : 3 kV - average temperature over 24 hours: 35 °C
- average annual temperature: 25°C C
• maximum permissible overloads:
- overcurrent (max):19 % at 400 V - minimum temperature: -5°C
- overvoltage: 10 % (8 hours over 24 hours as per
IEC 60831)
• losses: < 9 W/kVAr (with detuned reactor); D
525V version with Fuse - < 2W/kVAr (without detuned reactor)
Protection and Detuned Reactor • standard: IEC 60831-1, 2.
- [based on a 50kVAr functional plate]
• protection device: Compact NSX circuit breaker with E
thermo magnetic trip unit Fupact
• Fuse-switch disconnector with DIN fuses
F
Product references - eg. V50C52CR
V 50 C 52 F R
VARPACT kVAr@415V Capacitor type Capacitor Protection Reactors G
rated voltage
series 12 12.5kVAr C Can capacitor 52 525V AC C Circuit breaker protection R with reactors on
capacitor plate - 190Hz
H
25 25kVAr capacitor
50 50kVAr capacitors
Note:
I
* Using a different voltage rating for the capacitors will change the kVAr rating of the plate. Please check with
Schneider Electric before ordering.
Accessories / spares
Description Reference
VARPACT fishplate for interconnection offunctional plates (set of3 fishplates) FISHPLATES_VARP
Spare shroud for functional plate SHROUD_VARP
Dimensions
259
425
208
562
< >
se.com/au Life is On | Schneider Electric | E-175
Switchboard Manufacturers
Are products that blend superior quality, performance, and flexibility with excellent
value difficult to find?
Do you require the expertise, support, and reach of a global leader with the
E responsiveness of a local supplier?
• Continuity of service thanks to the high performance and long life expectancy of
capacitors.
• Routine testing in manufacturing plant.
• Design and engineering with the highest international standards.
Safety
Thanks to the know-how developed over 50 years, Schneider Electric ranks as the
global specialist in Energy management providing a unique and comprehensive
portfolio.
Schneider Electric helps you to make the most of your energy with innovative,
reliable and safe solutions.
VarSet offer A
Certified LV power factor correction capacitor banks
B
I
Technical data Technical data
General characteristics Electrical
Standards Compliance/ Certification AS/NZS 61439.1 & 2, Compensation type Automatic or Fixed
IEC 61439-
Capacitor type VarPlus Can (aluminium type)
1 & 2, IEC 61921
Capacitor rated voltage 525Vac
Installation Indoor
Discharge rate 50V, 1min
Capacitor operating conditions -5°C to +55°C
Compatible network 415Vac, 50Hz
Ambient temperature in electrical room +35°C
Short circuit rating (steps) 36kA
Ambient temperature around capacitors +45°C over 24hr
Rated conditional short-circuit current up to 150kA with incomer protection
+55°C max. (using NS or NSX type-L circuit
Humidity Up to 95% breakers)
Max. effective kvar S: 250kvar D: 500kvar
Mechanical
Physical steps (max) without incomer protection S: 6 steps
Ventilation Fan forced, 600m3/hr
per column (nominal) Connectivity
Mounting Floor standing Modbus communication Modbus RS485
Cable connection Top Feed Modbus TCP Using Com'X range
Colour RAL 2000 Physical steps (max) without incomer protection S : 6 steps
Ingress protection IP31 D: 12 steps
Degree of mechanical resistance Enclosure IK10 Detuned reactor 7%, 3.8th order, 190Hz
Accessories IK08 Step protection Circuit breaker
Enclosure types S: up to 250kvar / 5 Main incomer protection Circuit breaker or none
steps D: up to 500kvar /
10 steps Extended rotary handle Included (with main incomer
Dimensions* (H x W x D)mm S: 2190 x 865 x 640 protection)
D: 2190 x 1515 x 640 Max. dissipated power 8-9 W/kvar
Weight (max) S: 400kg D: 800kg Disconnection on generator supply Volt-free connection terminals
available
< >
se.com/au Life is On | Schneider Electric | E-177
Switchboard Manufacturers
VarSet offer
Certified LV power factor correction capacitor banks
Certified VarSet: Offer Range
VarSet Reference Power (kvar) Tuning factor Main Incomer Max. fault IP31 Cable Feed Rotary handle Controller 6/12 steps
number 3.8 (190Hz) Circuit Breaker level Top
*Maximum effective kvar per frame type: 250kvar (S), 500kvar (D) Maximum physical steps per frame type: 6 steps (S), 12 steps (D)
Certified to
Typical GA drawing: top feed cable entry, with incomer protection circuit breaker
A
C
VARSET
AUTOMATIC
POWER FACTOR CORRECTION BANK
Step 5
50kVAr
Step 5
D
50kVAr
Step 4
50kVAr
Step 4
50kVAr
Top view
Gland Plate Top view
Gland Plate
Bottom view
E
Step 3
50kVAr
Step 3
50kVAr
Step 2
50kVAr
Step 2
50kVAr
Step 1
50kVAr
Step 1
50kVAr
F
PLINTH
PLINTH
PLINTH
PLINTH
I
Step 10
50kVAr
Step 10
50kVAr
Step 9
50kVAr
Step 9
50kVAr
Step 8 Step 7
50kVAr 50kVAr
Step 8 Step 7
50kVAr 50kVAr
Step 6 Step 5
50kVAr 50kVAr
Step 6 Step 5
50kVAr 50kVAr
Step 4 Step 3
50kVAr 50kVAr
Step 4 Step 3
50kVAr 50kVAr
Step 2 Step 1
50kVAr 50kVAr
Step 2 Step 1
50kVAr 50kVAr
PLINTH PLINTH
PLINTH PLINTH
< >
se.com/au Life is On | Schneider Electric | E-179
Switchboard Manufacturers
Example: VSA31S225TD410MF
Typical schematic shown here for a PFC unit with the following configuration:
Note:
CT connection to VarPlus Logic controller to be supplied by installer
Main protective device not within PFC cubicle provided in MSB upstream
VarPlus 525V capacitors fitted with detuned reactors and circuit breaker step protection
Remove jumper A at terminals 1L3 and 2L3 for volt free contact for generator automatic disconnection
Wall Mounted A
Low voltage power factor correction capacitor banks
Part number referencing – wall mounted B
Part number kvar @ 415V Physical steps Electrical steps Enclosure size Typ. Dimension †
Weight (kg)
(kvar) (kvar) (mm) HxWxD
HxWxD C
VS025WA00B00C02TCC 25 12.5, 12.5 12.5, 25 800x600x400 900x600x450 69
VS087WA01B01C01TCC 87.5 12.5, 25, 50 12.5, 25, 37.5, 50, 1200x800x400 1300x600x450 124 E
62.5, 75, 87.5
VS100WA01B02C00TCC 100 25, 25, 50 25, 50, 75, 100 1200x800x400 1300x600x450 132
F
†: includes roof ventilation hood, door grill cover and incoming breaker rotary handle
Installation Indoor
Humidity Up to 95%
Electrical
VarSet wall mounted Qeff per enclosure Min: 25kvar; Max: 100kvar
Mechanical
< >
se.com/au Life is On | Schneider Electric | E-181
Switchboard Manufacturers
VarPlus Logic has all what you need for the simple and efficient Do more with VarPlus Logic
operation of your automatic power factor correction equipment • Programmable alarms with last 5 alarms log.
to maintain your power factor. It is a simple and intelligent relay
• Suitable for medium voltage applications.
which measure, monitor and controls the reactive energy. Easy
commissioning, step size detection and monitoring makes it • Suitable for 4 quadrant operations.
different from others in the market. • Dual cos phi control through digital inputs or export power
detection.
E Capacitor bank step monitoring • Dedicated alarm and fan control relays.
• Monitoring of all the connected capacitor steps • Advance expert programming Menu to configure the
controller the way you need.
• Real time power in “kvar” for the connected steps
• New control algorithm designed to reduce the number of
• Remaining step capacity per step as a % of the original
switching operations and quickly attain the targeted power
power since installation.
fact
• Remaining step power in kvar since installation
• Number of switching operations of every connected step.
Alarms
• Faulty Step
System Measurement and monitoring
• Configurable alarm for step derating
• THD(u) and THD(u) Spectrum 3rd to 19th - Measurement,
Display and Alarm • THDu Limit alarm
• Measurement of ∆Q – “kvar” required to achieve target cos • Temperature alarm
phi • Self correction by switching off the steps at the event of
• Present cabinet temperature and maximum recorded THDu alarm, temperature alarm and overload limit alarm
temperature • Under compensation alarm
• System parameters – Voltage, Current, Active, reactive and • Under/Over Voltage Alarm
apparent power • Low/High Current Alarm
• Large LCD display to monitor real step status and other • Overload limit alarm
parameters.
• Hunting alarm
• Maximum operational limits - Time and number of switching.
Easy Commissioning
• Automatic Initialization and automatic step detection to do a
auto commissioning
• Automatic wiring correction – voltage and current input
wiring correction
• 1A or 5A CT secondary compatible.
C C
D
B E E
Auxiliary (Control) Transformer
E
U1
Direct supply voltage 90 – 550 V, 1ph, 50/60 Hz
90V - 550V
U2
S1
15mA - 6A
S2
VA Burden: 6 VA F1
F2
F
TTL 1 K1
2 K2
Type of input connection Phase to phase or phase to neutral 0V
3
…
4
5
Protection against voltage dips Automatic disconnection of steps for dips > 15 ms D0- 6
CT secondary 1A or 5A compatible
I1
I2
AL1
9
10
11
G
AL2 12 K12
CT primary range Up to 9600 A
Current 15 mA – 6 A, 1PH,
VA Burden : < 1 VA
H
Connection terminals Screw type, pluggable. Section: 0.2 – 2.5 mm2 (0.2 –
1 mm 2 for Modbus and digital inputs)
Power factor settings & algorithm selection I
Regulation setting – Programmable From Cos Phi 0.7c to 0.7i Phase-to-Neutral with VTs (3PH4W)
Reconnection time – Programmable From 1 to 6500 s
L1
Response time – Programmable From 1 to 6500 s L2
S1 S2
L3
Possibility of dual cos Phi target Yes, through digital input or if export power detected
PE
detection
C
TTL 1 K1
2 K2
Detection and display of power, number of Yes 3
0V 4
5
D0- 6
Capacitor bank step sequence Any sequence. No restriction/limitation on sequence D1+ 7
8
I1 9
Alarm and control I2 10
AL1 11
K12
Control outputs (step output) VL6: 6 relays VL12: 12 relays ( NO contact) AL2 12
< >
se.com/au Life is On | Schneider Electric | E-183
Switchboard Manufacturers
A
The AccuSine+ platform continues to bring
industry accolades. For the second time, Schneider B
Electric is the winner of the coveted 2020 Frost &
Sullivan Award. The flagship product captured top
honors in Global Product Leadership for its high- C
performance, technologically advanced range of
AccuSine+ power correction solutions.
D
Winning the award demonstrates Schneider
Electric’s exceptional commitment to innovation,
with the AccuSine+ platform bringing premium E
refinement, flexible designs and ultra-fast,
highly accurate harmonic cancellation and
reactive current compensation for power quality F
management.
< >
se.com/au Life is On | Schneider Electric | E-185
Switchboard Manufacturers
Power Quality
Power quality problems are one of the major causes of unscheduled downtime,
equipment malfunction, and damage. Reliability and consistency of electricity supply
PB502832
are critical to businesses, from industrial plants, medical facilities, data centers
to office buildings. When power quality is imperfect due to disturbances such as
interruptions, voltage dips or harmonic pollution, your business suffers.
It is an area of growing concern for end users due to the frequency of occurrence
and financial impact of issues: 30 – 40 percent of all unscheduled downtime today
is related to power quality problems. In the industry sector, for example, the cost of
E poor power quality can reach four percent of annual turnover and is often equivalent
to the total balance payable on a facility’s energy bill.
A capital investment in power factor correction and harmonic filtering equipment can
result in a healthy return of investment. This return depends on the utility’s demand
rate structure; production quality cost related to harmonics; the cost of downtime
and interruptions due to voltage fluctuations in the distribution system.
Today, electrical installations are exposed to a great deal of power quality problems;
80 percent of these disturbances are typically generated by installed equipment.
PB502827
In industrial facilities, for example, such disturbances can be caused by non-linear
loads like arc welders or variable speed drives, capacitor switching, or large motor
starts. In commercial buildings, electronic equipment like computers, UPS, and
servers may also generate additional power quality disturbances.
The other 20 percent of power quality disturbances come from the energy
provider: even the most advanced transmission and distribution systems are not
able to guarantee 100 percent energy availability. Even with 99.99 percent energy
availability, the equivalent interruption time amounts to 52 minutes every year.
General Overview
AccuSine_PCSn
ultra-fast response, is resonance free, and provides an infinite resolution of compensation
compared to conventional PFC solutions.
AccuSine PCSn and AccuSine PCS+ are flexible, high performance solutions to stabilize
E
electrical networks by providing harmonic mitigation and power factor correction, and load
balancing. F
AccuSine PCS+ is specifically designed for harsh electrical conditions, for heavy industrial
applications including mission critical environments. G
In addition to 3-phase mitigation, AccuSine PCSn has the ability to compensate for neutral
harmonic currents, typically present in building and commercial environments where single- H
phase non-linear loads are present.
I
The quality and performance you expect
All our power quality solutions provide an excellent return on investment because they are
designed and manufactured by Schneider Electric, by using advanced manufacturing
methods and premium materials. They are optimized to match your application needs and
are engineered to provide superior performance.
< >
se.com/au Life is On | Schneider Electric | E-187
Switchboard Manufacturers
The Schneider Electric solution for active harmonic filtering in building and commercial installations.
Electrical Characteristics
Standard RMS output current ratings Chassis: 20 A, 30 A, 50 A, 60 A
Wall: 20 A, 30 A, 50 A, 60 A
Rack: 30 A, 60 A
Nominal voltage 208 - 415 Vac, -15%/+10%
Nominal frequency 50 / 60 Hz, ±3 Hz auto sensing
AccuSine_PCSn
E Network voltage distortion Max. 20% phase to phase (up to 30th order)
Voltage notch limits Notch depth: 10%, Notch area (AN): 13,667 Vµs @ 400 V as per IEEE
519-2014, Annex C
Technical Product Characteristics
Power electronics 3-level IGBT
Control Topology Digital harmonic FFT
Digital instantaneous reactive power
Efficiency & Losses 208 Vac ≥ 95% 3ph compensation: ≤ 17.7 W/A
3ph + N compensation: ≤ 19.7 W/A
380 - 415 Vac ≥ 97% 3ph compensation: ≤ 20.4 W/A
AccuSine PCSn wall mount -
main unit (CE version) 3ph + N compensation: ≤ 22.6 W/A
Current transformer Any ratio with 1 A or 5 A secondary; Class 1.0 accuracy;
50/60 or 400 Hz rated (instrument rated or better); Grounded; can be
shared with other devices.
CT VA loading 1 A: 0.04 VA
5 A: 1 VA
Quantity of CT 2or 3 CTs for 3-phase loads
3CTs are required for 4-wire with neutral connected loads
CT position Grid or load sense
Control basis Closed or open loop
Spectrum cancellation & selection 2nd to 51st harmonic order; discrete, fully selectable adjustable per
harmonic order (amplitude % and ON/OFF).
Modes of operation Multi-modes simultaneously or discrete
-phase harmonic correction
-neutral harmonic correction user-adjustable up to 3 time unit rating
-power factor correction (cos )
AccuSinePCSnRM
< >
se.com/au Life is On | Schneider Electric | E-189
Switchboard Manufacturers
Operator interface Chassis mount: 144 mm (5.7") supplied for mounting remotely Wall mount: 144 mm (5.7")
Rack mount: 90 mm (3.5")
Expansion units: no HMI required
User interface options Plain language, no cryptic code.
Multiple languages: English, French, Spanish, Portuguese, Chinese, Korean, German, Russian, and Polish.
Service port 2 x USB ports for firmware update, diagnostics file, and event log download, connection to PC.
Diagnostics can be downloaded via PC even if the unit is de-energized.
Commissioning features On-board step-by-step commissioning wizard via HMI.
E On-board commissioning report for download - no additional software required. Automatic CT calibration, polarity
detection and correction.
Phase sequence insusceptible.
Automatic unit neutral connection check.
Interoperability and Integration
Floor standing enclosures Using chassis module, ensuring air flow requirement is met.
Rack system integration Suitable for 19" wide rack systems, ensuring rack density requirement is met.
Edge control EPMS / SCADA integration EcoStruxure™ Power ready; native driver to Power Monitoring Expert 8.2 and later releases Compatible for operation
with AccuSine PCS+/PFV+ range;
Suitable for integration in 3rd party EPMS/SCADA through modbus mapping.
Typical Applications
Building LED / CFL Loads Research and Commecial Retail Hotel and Casino Healthcare
Life Sciences
Selection Table
AccuSine PCSn 208-415 V, 50/60 Hz
Rated Neutral rated Rated kVAR Catalogue Ingress Protection Mounting type Unit type Cable Frame Mass
current (A) current (A) @ 415 V number entry (kg)
20 60 14 PCSN020Y4CH00 IP00/Type OPEN* Chassis Main Bottom 12 61
30 90 22 PCSN030Y4W20 IP20
Reference Numbers
AR3100 NetShelter SX 42U x 600 mm Wide x 1070 mm Deep with doors 125 1991 600 1070 B
AR3300 NetShelter SX 42U x 600 mm Wide x 1200 mm Deep with doors 134 1991 600 1200
AR8136BLK NetShelter SX 1U toolless snap-in blanking panel, 10 pieces per pack 0.1 45 483 28 C
AR8108BLK NetShelter SX 1U standard metal blanking panel, 2 pieces per pack 0.1 44 483 3
AR8101BLK NetShelter SX 1U, 2U, 4U, 8U, blanking panel kit 3 - 483 3 D
AR7700 NetShelter SX stabilization plate to prevent tipping when sliding out equip- 4.5 75 351 207
ment
AR7701 NetShelter SX bolt-down kit — meets IBC seismic requirements for moder- 0.7 73 70 62 E
ate seismic zones
AR7701A-S NetShelter SX bolt-down kit — meets IBC seismic requirements for high 1 70 320 50
seismic zones
PCSNBTMKIT01 AccuSine PCSn terminal box for chassis & wall mount 7 430 550 290
F
PCSNFUSKIT230 AccuSine PCSn fuse kit for 20 A & 30 A chassis & wall mount 2 73 70 62
G
PCSNFUSKIT560 AccuSine PCSn fuse kit for 50 A & 60 A chassis & wall mount 2 70 320 50
H
For more information on NetShelter SX, please refer to: http://www.se.com/en/product-category/7500-it-racks-and-accessories
I
1U = 1.75” = 44.45 mm - Each PCSn rack module is 6U high + 1U space for cabling accessory (supplied with each unit).
Included in packaging: PCSn rack module, 1U cable plate and a pair of mounting rails for installation in NetShelter SX rack enclosures.
Note: Rack enclosure and accessories are not included in the PCSn module and must be ordered separately using the commercial references provided in the table
above.
Cable access roof
Air sealing: covers open space to
Easily adjustable prevent air recirculation and reduce
vertical mounting bypass airflow to improve cooling
rails efficiency.
Integrated baying
brackets
AR8101BLK
AR8136BLK
Toolless, zero-U Bolt-down and stabilization: prevents tip-over
accessory channel
in stand-alone rack applications and meet
specific anchoring requirements.
Half-height side
panels
Preinstalled leveling
feet and castors
< >
se.com/au Life is On | Schneider Electric | E-191
Switchboard Manufacturers
Typical Applications
< >
se.com/au Life is On | Schneider Electric | E-193
Switchboard Manufacturers
Note:
60 A IP20 configuration requires ordering two items: PCSP060D5IP00 and PCSPWMKIT60A; adds 232 mm to IP00 length and 8.7 kg.
120 A IP20 configuration requires ordering two items: PCSP120D5IP00 and PCSPWMKIT120A; adds 232 mm to IP00 length and 9.3 kg.
200 A IP20 configuration requires ordering two items: PCSP200D5IP00 and PCSPWMKIT300A; adds 273 mm to IP00 length and 8.6 kg.
300 A IP20 configuration requires ordering two items: PCSP300D5IP00 and PCSPWMKIT300A; adds 273 mm to IP00 length and 8.6 kg.
injecting leading VARs to raise voltage and lagging VARs to lower voltage; includes
speed of adjustment.
Control response time 25 μs
Reactive correction time ≤ 1/4 cycle
Display 145 mm QVGA TFT 7-color touchscreen
Operators Magelis HMI STU touch panel screen
Display parameters 100's: includes oscilloscope for viewing many selected parameters, phasor
diagrams, load power, measured currents for Is, If, I neg seq, PF (Cos φ), injected
currents for I reactive, I neg seq, etc.
Communications capability Modbus RTU, Modbus TCP/IP
Discrete input/outputs 4 input and 4 output dry contacts; assignable
Noise level < 70 db(A) typical
Color RAL7035 Enclosure; RAL7022 Plinth (floor standing units)
Earthing (Grounding) systems Suitable for most earthing (grounding) systems;
IT switch on EMC filter for IT earthing (ground), high resistance
Okken / Blokset
earthing (ground) or corner earthed (grounded) systems.
(IEC61439 certified)
< >
se.com/au Life is On | Schneider Electric | E-195
Switchboard Manufacturers
Seismic rating Complies with IBC and ASCE7 (Requires top anchorage for all floor standing models - rec. use NSYSFWFIX).
Ambient temperature safety Automatic temperature roll back based upon any device OT. Absolute shutdown if air inlet temperature reaches 51 °C.
Preset output limits (rms) Programmable set limit due to altitude or ambient temperature - becomes fixed output limit.
Circuit protection IP00 and IP20 - external means required. Supplied by others.
Free standing enclosures - Incoming circuit breaker with mechanical door interlock.
AIC rating (applies to input to 240 Vac - 200 kA cULus; 150kA IEC
circuit breaker ratings for free to 415 Vac - 200 kA cULus; 125 kA IEC
to 480 Vac - 200 kA cULus; 75 kA IEC
standing model enclosures)
to 600 Vac - 100 kA cULus; 20 kA IEC
to 690 Vac - No cULus; 100 kA IEC
Cable Entry Wall mount: UL Type open, IP00, UL Type 1, and IP20 - bottom only. Free standing: top and bottom entry through gland
plates.
PCBA protection Conformal coating on all PCBAs.
Typical Applications
Reference Numbers
120
83.1 @ 400 EVCP120D5IP31 IP31 Floor standing Top or Bottom 4 279 D
86.3 @ 415 EVCP120D5IP54 IP54 293
99.8 @ 480
EVCP200D5IP00 IP00 (chassis) Wall mount Bottom 5 171 E
131.6 @ 380
EVCP200D5IP31 IP31 Floor standing Top or Bottom 11 363
138.6 @ 400
200
143.8 @ 415
6 384 F
166.3 @ 480 EVCP200D5IP54 IP54 402
197.5 @ 380
EVCP300D5IP00 IP00 (chassis) Wall mount Bottom 7 210 G
207.8 @ 400 EVCP300D5IP31 IP31 Floor standing Top or Bottom 11 402
300
215.6 @ 415 8 422
H
249.4 @ 480 EVCP300D5IP54 IP54 436
Note:
60 A IP20 configuration requires ordering two items: EVCP060D5IP00 and PCSPWMKIT60A; adds 232 mm to length and 8.7 kg. I
120 A IP20 configuration requires ordering two items: EVCP120D5IP00 and PCSPWMKIT120A; adds 232 mm to length and 9.3 kg.
200 A IP20 configuration requires ordering two items: EVCP200D5IP00 and PCSPWMKIT300A; adds 273 mm to length and 8.6 kg.
300 A IP20 configuration requires ordering two items: EVCP300D5IP00 and PCSPWMKIT300A; adds 273 mm to length and 8.6 kg.
Wall mount kit Unit rating Height Width Depth Weight (kg) Weight (kg)
reference (A)
PCSPWMKIT60A 60 1530 421 349 97.3 8.7
< >
se.com/au Life is On | Schneider Electric | E-197
Switchboard Manufacturers
Frame size 12
E
Chassis mount IP00/UL Type OPEN Wall mount IP20
350 350
PHA2995900
PHA2996200
940 H 940 H
18mm
D W D W
• HMI only on main unit – supplied loose in the box for • HMI only on main unit.
mounting remotely. • Expansion unit has the same dimensions as the main
• Expansion unit has the same dimensions as the main unit, except no HMI provided.
unit, except no HMI provided.
Note: Fuse kit shall be installed on line side to maintain CULUS compliance.
Frame size 13
Wall mount UL Type 1
350
GDE38856900
1367 H
18mm
D W
Frame size 14
E
Rack mount
465
F
PHA2996500-PCSn
H
= ; ........... = 3 ............ = 4 ............. 0
$%%*0+='>%> *0$&#'+&*(0 )"0' " =
3 < < ?5 ; 6 .! " +
/(#
REV. 00 + (0 0 %+ &*(0
> %&" *=$ ,B"657
4;
D W
• HMI only on main unit. I
• Expansion unit has the same dimensions as the main unit, except no HMI provided.
Accessories
Fuse kit Terminal kit
MFR7070101_Front
MFR7169501_Front
345
D
125
445
192
Note:
All dimensions are indicative. Please refer to the dimensions in the Installation manual and engineering drawings for design purposes.
< >
se.com/au Life is On | Schneider Electric | E-199
Switchboard Manufacturers
W W W W D DDD W W D DDD
DB300894
DB300895
DB300886
DB300887
DB300888
DB300889
WW D DDD WW WW
H HHH
H HHH H HHH
DB300899
DB300886
DB300887
DB300888
DB300889
H HHH
H HHH H HHH
Note:
Dimensions are subject to change without notice.
Obtain current mechanical drawings at www.se.com.
Please refer to installation manual and engineering drawings for design purposes.
DB300913
DB300900
DB300901
DB300902
DB300903
C
D
H H
G
Frame size 7 Frame size 8
IP31 IP54 H
W D W D W D
I
DB300900
DB300901
DB300902
DB300903
DB300916
DB300917
H H
Frame size 9
IP31 IP54
W D W D
DB300890
DB300891
DB300892
DB300893
H H
Note: All dimensions are indicative. Please refer to the dimensions in the Installation manual and engineering drawings for design purposes.
< >
se.com/au Life is On | Schneider Electric | E-201
Switchboard Manufacturers
DB300905
DB300904
DB300905
E H H
DB300907
DB300906
DB300907
H H
Frame size 11
UL Type 1 (IP20) 240-480 Vac
W D
DB421907
DB421908
Note: All dimensions are indicative. Please refer to the dimensions in the Installation manual and engineering drawings for design purposes.
We deliver smart and cost-effective power quality solutions to improve our customers efficiency.
A
AccuSine
Active Power Correction for Harmonic Mitigation, Reactive Power
Compensation and Mains Current Balancing
B
Bring efficiency and reliability to your operation
C
E
Find out more visit
www.se.com
and download F
AMTED109015EN
I
Find out how to fix your power quality issues Real-time performance and capability of Take control of your operation today with
AccuSine PCSn AccuSine PCS+
VarSet Smart
Intelligent LV Capacitor Banks
Digitize your power factor correction
Relevant documents
Relevant documents published by Schneider Electric
• Electrical Installation Guide
• Expert Guide n° 4: Harmonic
• Expert Guide n° 6: Power Factor Correction and Harmonic Filtering Guide
• Technical Guide 152: Harmonic disturbances in networks, and their treatment
• Technical Guide n° 202: The singularities of the third harmonic
• White paper: controlling the impact of Power Factor and Harmonics on Energy Efficiency
• Harmonic mitigation - Solution Handbook (SLTED109014EN)
• AccuSine+ Installation and User Manuals
Relevant standards
• IEC 62477-1 - Safety requirements for power electronic converter systems and equipment
• IEEE 519 - Recommended practice and requirements for Harmonic Control in Electric Power Systems
• IEC 61642 - Application of filters and shunt capacitors for industrial a.c. networks affected by harmonics
< >
se.com/au Life is On | Schneider Electric | E-203
Switchboard Manufacturers
Rack Solutions
Enclosure and rack systems
E
Find out more visit
www.se.com
and download
998-4936_GMA-US_B
Cooling Solutions
Cooling Solutions for IT Equipment