Professional Documents
Culture Documents
Construction
Construction
Analysis Apparatus
GlobeTrek Engineering Corporation is a
Trusted Supplier & Exporter of Orsat
Gas Analysis Apparatus .
INTRODUCTION :
ORSAT GAS ANALYSIS APPARATUS
CONSTRUCTION:
The Orsat apparatus works using a very simple method. To find the volume of a
particular gas within the sample a fixed volume of the sampled gas is passed through a
specific solution which absorbs only the required gas. The remaining volume of the gas
can then be re- measured and compared with the original volume to find the proportion
of a specific gas within the sample.
Contact : (+91) - 932362 7990 / 9594147146 , Email : globetrekengineering@gmail.com
Web : www.globetrekengineering.com
The sampled gas is passed through a sequence of solutions each removing one of the
gases and the remaining volume calculated afterwards. A solution of caustic potash is
used to absorb the carbon dioxide, a mixture of pyrogallic acid, caustic potash and
water is used to absorb the oxygen, and to remove the carbon monoxide a solution of
cuprous chloride is used.
ORSAT GAS ANALYSIS APPARATUS
SPECIFICATION :
Orsat Gas Analysis Apparatus – 3 Test Complete in wooden cabinet with sliding doors.
Orsat Gas Analysis Apparatus – 4 Test Complete in wooden cabinet with sliding doors.
Four absorption pipettes of two compartment type
100 ml Gas Burette with outer jacket
Four Test Manifold with stopcocks
Aspirator bottle, for the analysis of CO, O2, CO2 particularly in fuel and furnace gases
Calcium chloride tube and rubber below
Ready Made Set of Chemicals for Analysis for 25-30 test @ extra Cost