This document provides instructions for installing a primary timing chain on a vehicle, including installing the crankshaft pulley and tightening it to a specified torque and angle, then referring to another section to install the secondary timing chain and associated parts before reinstalling other components.
This document provides instructions for installing a primary timing chain on a vehicle, including installing the crankshaft pulley and tightening it to a specified torque and angle, then referring to another section to install the secondary timing chain and associated parts before reinstalling other components.
This document provides instructions for installing a primary timing chain on a vehicle, including installing the crankshaft pulley and tightening it to a specified torque and angle, then referring to another section to install the secondary timing chain and associated parts before reinstalling other components.
15. Install crankshaft pulley. a. Install crankshaft pulley to crankshaft. b. Hold crankshaft pulley with the pulley holder (SST). c. Tighten bolt to 20 to 29 N·m (2.0 to 3.0 kg-m, 15 to 21 ft-lb). d. Put an alignment mark on crankshaft pulley that aligns with one of the punched marks on the bolt. e. Tighten fixing bolt another 60° - 66° [target: 60° (turn by one notch)]. 16. Install secondary timing chain and the associated parts. Refer to EM-95, “Secondary Timing Chain”, “INSTALLATION”. JEM147G 17. Install in the reverse order of removal hereafter.