Professional Documents
Culture Documents
H-100 Control Panel
H-100 Control Panel
H-100 Control Panel
Features
• Two 4-line x 20 Displays • Shutdowns
• Full System Status - Overvoltage
• 3 Phase Sensing Digital Voltage Regulator - Overspeed
• Remote Ports - Low Oil Pressure
- RS-232 - High Coolant Temperature
- RS-485 - Low Coolant Level
- CANbus • Emergency Stop
• Waterproof Connections • On/Off/Manual Switch
• Built -in PLC • Not in Auto Flashing Light
• Full Range Standby Operation • Audible Alarm for Fault Condition
• Full System Status • Transfer Switch Logic Communicates with HTS
- 3 Phase AC Volts Transfer Switch
- 3 Phase Amps • Selectable Low Speed Exercise
- kW • Temperature Range: -40° to +70°C
- Power Factor
- Reactive Power Codes and Standards
- Oil Pressure • UL 508
- Water Temperature • Configurable to NFPA 110, Level 1 or 2
- Water Level
- Oil Temperature (Optional) The generator set parameters can be manipulated and
- Fuel Pressure monitored without standing in front of the control panel with
- Engine Speed GenLink® software. The Generac H-100 control panel also
- Battery Voltage wmonitors and controls transfer switch functions when used
- Alternator Frequency with the HTS transfer switch.
- Time • Monitors Utility Voltage
- Date • Monitors Generator Voltage
- Transfer Switch Status • Timer for Line Interrupt Delay
GENERATOR CONTROLS
1 OF 2
Part No. 0172110SBY
Rev. F 02/08/23
H-100 CONTROL PANEL
RS485 -
HTS
Quiet-Test™ H-100 2-wire
Transfer
Controller with Ground
Switch
on Generator Connection
for Control
Any 2-wire
or Start ATS
GENERATOR CONTROLS
2 OF 2
Generac Power Systems, Inc. | P.O. Box 8 | Waukesha, WI 53187 Part No. 0172110SBY
P: (262) 544-4811 © 2023 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Rev. F 02/08/23