Professional Documents
Culture Documents
FW8510 19.0v1 Firewall Reporting in Sophos Central
FW8510 19.0v1 Firewall Reporting in Sophos Central
Central
Sophos Firewall
Version: 19.0v1
[Additional Information]
Sophos Firewall
FW8510: Firewall Reporting in Sophos Central
April 2022
Version: 19.0v1
© 2022 Sophos Limited. All rights reserved. No part of this document may be used or reproduced
in any form or by any means without the prior written consent of Sophos.
Sophos and the Sophos logo are registered trademarks of Sophos Limited. Other names, logos and
marks mentioned in this document may be the trademarks or registered trademarks of Sophos
Limited or their respective owners.
While reasonable care has been taken in the preparation of this document, Sophos makes no
warranties, conditions or representations (whether express or implied) as to its completeness or
accuracy. This document is subject to change at any time without notice.
Sophos Limited is a company registered in England number 2096520, whose registered office is at
The Pentagon, Abingdon Science Park, Abingdon, Oxfordshire, OX14 3YP.
DURATION
6 minutes
In this chapter you will learn how to enable Sophos Firewall reporting in Sophos Central, and how
to run reports.
Central Firewall Reporting provides access to dashboards and reports in Sophos Central for each of
your Sophos Firewalls. You can also view and filter logs. The last 7 days of data is available in
Sophos Central updated on a first in, first out (FIFO) basis. This means that the oldest data is always
replaced with the most current data.
You can increase the amount of reporting data that can be stored, and for how long, using Central
Firewall Reporting Advanced licenses. These licenses also unlock additional reporting features.
To start using Central Firewall Reporting, the Sophos Firewall needs to be registered with Sophos
Central and the option Send logs and reports to Sophos Central must be enabled in Sophos
Central services. This can be found in SYSTEM > Sophos Central.
Once enabled, data should start appearing in Sophos Central within around 10 – 15 minutes.
Enabling Central reporting creates a syslog server for uploading the data to Central in CONFIGURE
> System services > Log settings.
Here you can also customize the data that is uploaded to Central in the Log settings section.
In the Report Hub, you first need to select the firewall, either by label or by serial number if you
have not added a label. These are organized into groups.
You can click on the summary buttons in each section and the information below will be updated
to show more detail. Where available, a View Report link will also be displayed to take you directly
to the full report.
In the Report Generator you can access and customize the prebuilt reports.
By clicking on the data in the chart or the links in the table below you can apply filters to the
report.
You can also manually enter filters. When you click in the ‘Query’ field you will see the fields that
you can select to filter on.
You can customize the graphs in each report by selecting the type of chart and the fields that you
want displayed.
You can also select which columns you want to appear in the table.
In the ‘Log Viewer & Search’ report you will see the logs from the Sophos Firewall. Just like for the
reports you can click on the links to add filters, or you can add them manually. In the top-right you
can select which columns are shown and switch between the column view and log view.
To unlock more features in Central Firewall Reporting, you can add a CFR Advanced license to your
Central account. Once applied it will appear on the licensing page, that can be opened from the
admin menu in the top-right. To get started with the new features, you first need to assign the
licenses to the firewalls; click Manage next to the Central Firewall Reporting license.
[Additional Information]
https://community.sophos.com/sophos-xg-firewall/b/blog/posts/new-enhancements-to-central-
firewall-reporting
Licenses provide 100 GB of storage each. Use the plus and minus buttons next to each device to
apply the licenses then click Save.
Once you have applied licenses to a device, you have additional options to manage the license,
including associating it with a replacement, reclaiming the license, and deleting the data.
With CFR Advanced licenses you can start reporting on multiple firewalls in a single report. You can
do this from the group’s menu.
You can also select multiple firewalls that have CFR Advanced licenses directly on the Report Hub
and Report Generator pages.
Firewalls that do not have CFR licenses can only be selected for reporting on their own.
CFR Advanced licenses unlock the ability to create report templates, and optionally configure
automatic scheduled exports as PDF, CSV or HTML.
The exports can be sent via email notification and can either be included as a link or an
attachment.
In the Report Generator you will notice that the Saved Templates, Scheduled Exports and Queue
tabs are unlocked.
From the Saved Templates tab, you can edit the settings of your template and launch it.
The Scheduled Exports tab stores your exported reports and makes them available for download
for 90 days.
The Queue tab is for reports that take a long time to generate.
https://training.sophos.com/fw/simulation/CentralReporting/1/start.html
In this simulation you will run reports for Sophos Firewall in Sophos Central.
[Additional Information]
https://training.sophos.com/fw/simulation/CentralReporting/1/start.html
Standard Central Firewall Reporting provides storage for the last 7 days of data in Sophos
Central. You can filter logs and reports from Sophos firewall, and create customized
reports
To start using Central Firewall Reporting, the Sophos Firewall needs to be registered with
Sophos Central and the option Send logs and reports to Sophos Central must be
enabled. You can customize the data that is uploaded in the log settings
Each CFR Advanced license includes 100GB of data storage, and enables reporting on
multiple firewalls, saving templates, and scheduling reports
Standard Central Firewall Reporting provides storage for the last 7 days of data in Sophos Central.
You can filter logs and reports from Sophos Firewall and create customized reports.
To start using Central Firewall Reporting, the Sophos Firewall needs to be registered with Sophos
Central and the option ‘Send logs and reports to Sophos Central’ must be enabled. You can
customize the data that is uploaded in the log settings.
Each CFR Advanced license includes 100GB of data storage, and enables reporting on multiple
firewalls, saving templates, and scheduling reports.