Professional Documents
Culture Documents
Assignment 2
Assignment 2
STRUCTURAL THEORY
Assignment 2
1
𝑦𝑦 = � � 𝑤𝑤0 𝑑𝑑𝑑𝑑 𝑑𝑑𝑑𝑑
𝐹𝐹𝐻𝐻
2. Without solving the reactions and the force of member EF of the truss shown in
Figure H005678AW5037DC0, determine the force in member BD. State if the
member is in tension or compression. (10 pts)
3. Determine the equation(s) that describe the deflection of the beam shown in Figure
H005578AW5135DC0. A roller supports the beam at A, a fixed support at C, and an
internal hinge at B. What are the values of the maximum deflection and its location?
(20 pts)
4. Draw the shear and moment diagram of the beam shown in Figure
H005578AW5135DC0. A roller supports the beam at A, a fixed support at C, and an
internal hinge at B (15 pts).
5. Determine the equation(s) that describe the deflection of the beam shown in Figure
H005768AW5134DC0. What are the values of the maximum deflection and its
location? (20 pts)
6. Draw the moment diagram of the beam shown in Figure H005768AW5134DC0. Use
the principle of superposition. (15 pts)
7. Determine the maximum positive moment due to the moving load at the midspan of
the beam shown in Figure H006766AW5124DC0. Use influence lines when
calculating for the maximum moment. (10 pts)
You may submit your work in paper form at 1PM on 9 December 2022.
Figure H005978BS0537DG1 Figure H005678AW5037DC0
Figure H005578AW5135DC0
Figure H005768AW5134DC0
Figure H006766AW5124DC0