Professional Documents
Culture Documents
Instructions For Intelligent Technologies (IT) Soft Starter, Catalog Nos T801T and T801V
Instructions For Intelligent Technologies (IT) Soft Starter, Catalog Nos T801T and T801V
Revision A
The IT. Soft Starter features an electronic motor over- NOTE: Short circuit protection must be applied on the
load protection feature. This is intended to protect the line side of this soft starter.
motor and power wiring against overheating caused by
excessive current for extended periods of time. Trip current rating is fixed to 100% of the unit’s rated
current.
OVLD 5 10 20 30 Thermal memory is incorporated to accurately monitor
TRIP TRIP motor operating temperature. Ambient temperature does
CLASS not affect soft starter function within its operating limits.
B The default overload trip class is set to Class
C
Frame Catalog Max Value of Adjustment Settings (Amps)
30. This setting determines the time to trip, Size Number Current
A B C D
based on the severity of the overload condi-
T801T18N3D 180 180 180 180 180
A FLA D tion. 200mm 240 240 240 240 240
T801T24N3D
T801T T801T30N3D 304 304 304 304 304
T801V36N3D 360 360 360 360 360
AUTO/MANUAL RESET T801V42N3D 420 420 420 420 420
290mm T801V50N3D 500 500 500 500 500
Select auto or manual reset on the Control Interface T801V T801V65N3D 650 650 650 650 650
Module. T801V72N3D 720 720 720 720 720
T801V85N3D 850 850 850 850 850
When a fault is present, the auto-reset will attempt to
reset the fault every 2.5 seconds. If the fault is clear,
the system resets the fault(s), the soft starter is ready POWER WIRING
for use, and may be restarted by selecting “Run 1” No. of
Frame Lug Kit No. of Wire Sizes Torques
(assuming power is present). Size Options Conductors 75° C only Req’d. Kits
Req’d.
NOTE: The motor does NOT automatically restart after 4/0 - 500 MCM 28.2 N-m
a fault is reset. 200mm EML23 1 2
107 - 240mm (250 LB-IN)
4/0 - 500 MCM 28.2 N-m
NOTICE/AVIS EML24 2 2
107 - 150mm (250 LB-IN)
T801T 2
Automatic reset is not intended for two-wire control EML25 1
2/0 - 300 MCM
2
25.4 N-m
devices. 70 - 150mm (225 LB-IN)
Effective 10/02