Professional Documents
Culture Documents
Catc7 Marine
Catc7 Marine
Catc7 Marine
I-6, 4-Stroke-Cycle-Diesel Displacement............................................. 7.2 L (442 cu in) Rated Engine Speed....................................................2800 Bore.......................................................... 110 mm (4.33 in) Stroke......................................................... 127 mm (5.0 in) Aspiration................................... Turbocharged-Aftercooled Governor.............................................................. Electronic Cooling System.......................................... Heat Exchanger Weight, Net Dry (approx.)......................... 799 kg (1,761 lb) Refill Capacity Cooling System.....................................39 L (10.3 U.S. gal) Lube Oil System..................................... 25 L (6.6 U.S. gal) Oil Change Interval.................................................. 200 hrs Caterpillar Diesel Engine Oil 10W30 or 15W40 Rotation (from flywheel end).................... Counterclockwise Flywheel and Flywheel Housing.........................SAE. No. 3 Flywheel Teeth...............................................................126
28 March 2008
11:26 AM
C7 ACERT
MARINE PROPULSION
460 mhp (454 bhp) 339 bkW
PERFORMANCE CURVES
E-RATING - DM8122-00
Engine Power hp
English
Engine Torque lb ft
Maximum Power Prop Demand -------
BSFC lb/hp-hr
NOTE: Prop demand data is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
28 March 2008
11:26 AM
C7 ACERT
MARINE PROPULSION
460 mhp (454 bhp) 339 bkW
DIMENSIONS
Right Side
Front
Engine Dimensions (1) Length to Flywheel Housing 1225.4 mm (2) Width 936.7 mm (3) Height 921.5 mm Weight, Net Dry (approx) 799 kg
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2863205 ).
28 March 2008
11:26 AM
C7 ACERT
MARINE PROPULSION
460 mhp (454 bhp) 339 bkW
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary according to the particular application of the engine and operating conditions beyond Caterpillar's control. Power produced at the flywheel will be within standard tolerances up to 49 C (120 F) combustion air temperature measured at the air cleaner inlet, and fuel temperature up to 52 C (125F) measured at the fuel filter base. Power rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft power.
Performance No.: DM8122-00 Feature Code: C07MC01 U.S. Sourced 12095031 28 March 2008
2008 Caterpillar All rights reserved. Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos, "Caterpillar Yellow," and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.