Professional Documents
Culture Documents
Department of Education: Third Periodical Test in Science 6 Table of Specification
Department of Education: Third Periodical Test in Science 6 Table of Specification
Department of Education: Third Periodical Test in Science 6 Table of Specification
Department of Education
Region I
SCHOOLS DIVISION OF _____________
_________ ELEMENTARY SCHOOL
________ District
TABLE OF SPECIFICATION
COGNITIVE PROCESS DIMENSIONS
Remembering
Understandin
No.
Evaluating
Analyzing
Applying
Creating
No. of % of of
COMPETENCIES
Days Items Item
g
s
TOTAL 35 100% 50 14 16 7 8 4 1
30 15 5
Approved by:
Directions: Read each item carefully. Write the letter of the correct answer before each number.
32. When you light the wood to burn, what kind of energy transformation occurs?
A. transformation through heat B. transformation through light
C. transformation through work D. transformation through vacuum
33. As our body perform processes like digestion, respiration, and circulation. Our processes are
powered by chemical energy stored in our body, which is then transformed
into_________________________.
A. heat energy C. mechanical energy
B. light energy D. sound energy
34. Which is not a function of a simple machine?
A. Makes doing work easier. C. Makes work longer and difficult.
B. Changing direction of a force. D. Increases the distance over which a force can be
Applied.
35. Which simple machine consists of sloping surface that reduces the amount of force needed to lift
something?
A. Lever C. Wheel and Axle
B. Pulley D. Inclined Plane
36. What simple machine is shown in the picture?
A. Lever
B. Pulley
C. Wedge
D. Screw
37. Which simple machine allows you to gain mechanical advantage in moving object or in applying a
force to an object?
A. Lever B. Pulley C. Wedge D. Screw
38. Which does not belong to the group?
A. Crank of a paper sharpener C. Door Knob
B. Meat Grinder D. Spoon
39. Which of the following is NOT the function of wheel and axle?
A. It multiplies force if the effort is applied at the wheel
B. It multiplies force if the resistance is applied at the axle.
C. It multiplies distance or speed if the effort and resistance are applied the other way
around.
D. It multiplies force if the resistance is applied at the wheel and the effort is applied at the
axle.
40. The following show proper precautionary measures in using simple machines EXCEPT ____.
A. Use the right type of simple machine for the right job.
B. Simple machines that are sharp should be handled with care.
C. Secure pulleys properly and make sure that it is tightly tied on the support.
D. Expose knife, scissors and other sharp objects in a place easily reached by children.
41. Which is the correct way of handling simple machines?
A. When carrying sharp and pointed tools, position the pointed edge upward.
B. When carrying sharp and pointed tools, position the pointed edge sideward.
C. When carrying sharp and pointed tools, position the pointed edge downward.
D. When carrying sharp and pointed tools, position the pointed edge to your stomach.
42. Who among the four children demonstrates the proper way of handling simple machines?
A. After using simple machines like scissors, cutter and knife, Irish leaves those on
stairways.
B. Haydee plays with her friends in a place where heavy loads are being lifted by pulleys.
C. Teody always sure that any tool is in good condition before using it.
D. Xavier uses simple machines with exposed wires.
43. Diagram 1 shows a worker lifting a rock.
A. III only B. I and II only C. II and III only D. I,II and III
44. The three types of pulleys systems are: Fixed, Movable and
A. Block and Attack C. Tack and Sing
B. Movable and Pull D. Block and Tackle
45. Which of the pulley systems has the greatest mechanical advantage?
47. A wheelbarrow is a compound machine. It is made up of more than one simple machine. What
type of simple machine are the handles of the wheelbarrow?
A. lever B. wedge C. wheel and axle D. pulley
48. What should you do to reduce the amount of effort needed to lift something using a
first class lever?
A. Move the fulcrum to the middle of the lever.
B. Move the fulcrum closer to the load.
C. Move the fulcrum closer to the effort.
D. Move the fulcrum at the edge.
49. When riding uphill on a bike, to make the work easier, you should use which
gear?
A. high Gear C. medium Gear
B. low Gear D. none of the above
50.The following show proper precautionary measures in using simple machines EXCEPT:
A. Use the right type of simple machine for the right job.
B. Simple machines that are sharp should be handled with care.
C. Secure pulleys properly and make sure that it is tightly tied on the support.
D. Expose knife, scissors and other sharp objects in a place easily reached by
children.
Republic of the Philippines
Department of Education
Region I
SCHOOLS DIVISION OF _____________
_________ ELEMENTARY SCHOOL
________ District
ANSWER KEY
1. A 26.A
2. B 27.A
3. C 28.D
4. D 29.D
5. D 30.B
6. C 31.D
7. C 32 A
8. A 33.C
9. B 34.C
10. A 35.D
11. B 36.A
12. A 37.A
13. D 38.D
14. A 39.D
15. D 40.D
16. B 41.C
17. D 42.C
18. A 43.B
19. D 44.D
20. B 45.D
21. A 46.D
22. D 47.D
23. B 48.B
24. D 49.B
25. B 50.D