Professional Documents
Culture Documents
D75KS
D75KS
D75KS
ROTARY/DTH
BLAST HOLE DRILL
TECHNICAL SPECIFICATION
FEED
*Weights are approximate and subject to change without notice. All
Metric Imperial
performance figures are theoretical and at 100% systems efficiency.
Feed type Hydraulic cylinder and chain
Brake Spring set, hydraulic release
Chain type 2 heavy series roller chains
POWER GROUP
with heavy side bars and thru
Metric Imperial hardened pins
Engine Model QSK 19
Rated horsepower 563 kW 755 hp Chain size ANSI #200 ANSI #200
Super-H Series, Super-H Series,
Full load rpm 1,800 RPM 63.5 mm pitch 2 1/2” pitch
Standard ambient range -VE 15°C 5°F
Rotary head stroke 12.19 m 40’
+VE 54°C -130°F
Bit load 409 kN 92,000 lbf
Fuel tank 2,274L 600 gal
with heavy wall pipe
High pressure 38.2 m3/min 1,350 scfm
Chain adjustment Manually adjusted hydraulic
DTH 24.1 bar 350 psi
Low pressure 45.3 m3/min 1,600 scfm
Rotary 6.9 bar 100 psi
MAST
Metric Imperial
2 SANDVIK D75KS
DIMENSIONS
Metric Imperial
Mast up height 16.33 m 53’ 7”
Operating width 5.05 m 16’ 7”
Mast down length 15.54 m 51 ft
Mast down height w/ work deck 5.33 m 17’ 6”
Mast up length 10.97 m 36 ft
WEIGHT
Base unit less tools 56,246kg 124,000 lb
SANDVIK D75KS 3
TS2-408-01/ENG/METRIC © Sandvik Mining 2018 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification
to users. Please contact a Sandvik representative for clarification on specifications and options.
ROCKTECHNOLOGY.SANDVIK