Professional Documents
Culture Documents
Quick Start Guide Sena SRL2
Quick Start Guide Sena SRL2
SENA MOTORCYCLES
• Device Configuration Setting
Firmware
Bluetooth Module
Antenna
Speaker
Antenna
Microphone Connector
(-) Button
1 2
1
2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17
Full Face Helmet Installation
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15
Icon Legend
TAP Tap button the specified HOLD Press and Hold button for the
1x number of times 10s specified amount of time
Basic Operations
Powering On Powering Off
HOLD TAP
1s 1x
TAP TAP
1x 1x
① HOLD
“Configuration menu”
10s
Blinking
② TAP
1x “Phone pairing”
SRL-Mesh
Pi
Device B
TAP HOLD
1x 2s
Reject a Call
HOLD
2s
Music Control
Play/Pause
HOLD
1s
HOLD HOLD
1s 1s
Mesh Intercom™
Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.
Mesh Intercom On
Blinking
TAP
“Mesh intercom on,
1x Open Mesh, channel 1”
TAP
“Mesh intercom off”
1x
TAP
“Channel setting, 1”
2x
TAP
1x
or “#”
TAP
1x
Note: You can use the SENA MOTORCYCLES App to change the
channel.
Group Mesh
Group Mesh is a closed group intercom function that allows users to
join, leave, or rejoin a group intercom conversation without pairing
each headset.
You B C
You C
HOLD
“Mesh grouping”
5s
“Group Mesh”
2) Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new
users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing
Group Mesh Open Mesh Existing Group Mesh
You F You F
B D
D C
C B
① One (You) of the current users in the Existing Group Mesh and
new users (D and F) in Open Mesh enter into Mesh Grouping to
join the Existing Group Mesh.
HOLD
“Mesh grouping”
5s
“Group Mesh”
Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a
Mesh Intercom.
HOLD
“Mic on” or “Mic off”
1s
Reset Mesh
If the headset in an Open Mesh or Group Mesh resets the Mesh, it
will automatically return to Open Mesh (default: channel 1).
HOLD
“Reset Mesh”
8s
Bluetooth Intercom
Up to three other people can be paired with the headset for
Bluetooth intercom conversations.
B
A C
YOU
D
Intercom Pairing
There are two ways to pair the headset.
④ Tap Save and check that your friend (B) is paired with you (A)
correctly.
⑤ Tap Scan ( ) and repeat steps 3-4 to pair with Intercom Friends
(C) and (D).
YOU
Turns blue
② The two headsets (A and A B
B) will be automatically
paired.
YOU
③ Repeat the steps above to pair with other headsets (C and D).
Last-Come, First-Served
If the headset has multiple paired headsets for intercom conversations,
the last paired headset is set as the First Intercom Friend.
1
A D C B
A 2 C
YOU
3 YOU Intercom
Friend 1
Intercom
Friend 2
Intercom
Friend 3
D
Two-way Intercom
Start/End Conversation with the First Intercom Friend D
TAP
1x
TAP
2x
TAP
3x
FM Radio
FM Radio On/Off Start/Stop Scanning
HOLD HOLD
1s 1s
TAP TAP
2x 2x
HOLD
1s
Note: You can also save the current station from the SENA
MOTORCYCLES App.
Configuration Menu
Accessing the Configuration Menu
HOLD
“Configuration menu”
10s
TAP
or TAP
1x 1x
TAP
1x
Troubleshooting
Fault Reset
Pinhole Fault
Reset Button
Note:
• Fault Reset will not restore the headset to factory default settings.
• The charging LED is not the Pinhole Fault Reset Button. Do not
press it.
Charging LED
Factory Reset
① HOLD
“Configuration menu”
10s
② TAP
“Factory reset”
2x
HOLD
1s
Power on /
Power off TAP
1x
Basic
Operations
TAP
Volume up / Volume down or 1x
TAP
Answer phone call 1x
HOLD
End phone call 2s
Mobile
Phone
HOLD
Reject phone call 2s
TAP
Mesh Intercom on/off 1x
TAP
Channel setting 2x
HOLD
Mesh Grouping 5s
Mesh
Intercom™
HOLD
Reset Mesh 8s
HOLD
Enable/Disable Mic 1s
HOLD
Intercom pairing 5s
TAP
Intercom Start/End intercom 1x
HOLD
Play/Pause music 1s
HOLD
Track forward 1s
Music
HOLD
Track backward 1s
TYPE OPERATION BUTTON COMMANDS
HOLD
FM radio on/off 1s
HOLD
Select preset 1s
TAP
FM Radio Seek forward/backward or 2x
stop scanning 1s
1.0.0_EN_April2022