To transfer a numeric value from main memory to the accumulator register on a microprocessor, the control signals must be set to load the accumulator register and read from the data bus. To add a numeric value from main memory to the value in the accumulator, the control lines must be set to load the accumulator register and read from the data bus while also enabling the arithmetic function.
To transfer a numeric value from main memory to the accumulator register on a microprocessor, the control signals must be set to load the accumulator register and read from the data bus. To add a numeric value from main memory to the value in the accumulator, the control lines must be set to load the accumulator register and read from the data bus while also enabling the arithmetic function.
To transfer a numeric value from main memory to the accumulator register on a microprocessor, the control signals must be set to load the accumulator register and read from the data bus. To add a numeric value from main memory to the value in the accumulator, the control lines must be set to load the accumulator register and read from the data bus while also enabling the arithmetic function.
control signals to transfer a numeric value from the main memory to theAccumulator register on the Brainless Microprocessor? Control SignalValueLoad IRWriteReadACC to Data BusLoad ACCLoad MARUse PC/~A_Only/~InvertLogic/~Arith2How do you have to set up the control lines to ADD a numeric value from the main memory to the value held inthe Accumulator register on the Brainless Microprocessor?