Professional Documents
Culture Documents
SiTech Putty English TDS
SiTech Putty English TDS
PRODUCT CHARACTERISTICS:
Excellent whiteness
Suitable consistency and extreme ease of application
Excellent resistance to water and alkalis.
High ability to fill porous surfaces and relatively small holes
Excellent Sandability
High Durability for Exterior application.
RECOMMENDED USE:
Exterior Surfaces.
For Concrete, Gypsum board, Cement Plaster, etc.
TECHNICAL DATA:
Finish Matt
Viscosity 300 10 gm/cm2 (at 25°C temperature and 50% humidity)
Density 1.75 0.03 gm./cm� (at 25°C and RH 50%) (As per ASTM D 1475-13)
Solid by volume % 58 2 %
Flash Point Non flammable
V.O.C 4 gm./L (as per EPA Method 24)
CERTIFICATE:
SI-TECH XTR PUTTY meets the Classification of V1 (High) as per BS EN 1062-1 in terms of
water Vapor Transmission Rate.
SI-TECH XTR PUTTY has anti carbonation Properties as it reduces the flow rate of Carbon
dioxide to be 0.27 (cm3s-1) as per EN 1062-6.
Certificates are available upon request.
APPLICATION DATA:
Thinner / Cleaner Water
Thinning ratio by volume % As needed
Application tools Putty knife and steel Malg
DRYING TIME:
Generally, drying time depends on air, temperature, film thickness, and number of coats.
Data in schedule is measured at 25°C temperature and 50% humidity:
General Notes:
Actual spreading rate depends on many factors like surface condition, effectiveness of
application tool, film thickness, surface porosity, surface defects, temperature, quantity lost
during application.. etc.
Maximum spreading rate for one coat may be realized by minimizing the dry film thickness,
and vice versa.
STORAGE:
Shelf life is two years from production date.
The product must be stored in accordance with national regulations.
The product must be kept in cool well ventilated place, protected from sunlight and heat.
Containers must be kept tightly closed after partial usage.
CLARIFICATION:
The information in this Technical Specification is given to the best of our knowledge. It is based
on laboratory tests and practical experience. Sipes takes no responsibility for consequences of
breaching the instructions. The Company reserves the right to change data herein without
notice.