Professional Documents
Culture Documents
10
10
SMCS - 7490
Service > Service Tests
The Service button allows the operator to view the machine’s service parameters.
AP500
AP555
AP600
AP655
AP1000
AP1055
Illustration 1 g03883510
(1) Service button
Illustration 2 g06030918
(2) Service Tests menu button
The Service menu page contains the following sub-menus:
Diagnostics
Calibrations
Service Tests
ECM Summary
1. Press the Service Tests menu button (2). The menu button will highlight first in blue and then in yellow. The Service Tests menu page will
appear.
1. Press the "Ground Fault – Manual" menu button (3). The menu button will highlight first in blue and then in yellow. The "Ground Fault –
Manual" test page will appear.
Illustration 4 g06001281
(4) BACK button
(5) DOWN Arrow button
(6) UP Arrow button
(7) OK button
(8) Non-Interactive Scroll Bar with Sliding Indicator
(9) Service Test Instruction pages
Note: The following is an example for the “Ground Fault – Manual” Display screen navigation. For testing procedures, refer to the following
troubleshooting manuals:
2. Press the "Service Tests" button (2). The "Service Tests" button will highlight in yellow and the "Service Tests" menu page will appear.
AP500E, AP555E, BG500E, and BG555E Asphalt Pavers (CAT Media Number KENR6691)
AP600 and AP655 Asphalt Pavers and SE50 V XW and SE50 VT XW Asphalt Screeds Machine Electrical System (CAT Media Number
UENR5500)
AP1000 and AP1055 Asphalt Pavers and SE60 Asphalt Screed Machine Electrical System (CAT Media Number UENR3864)
3. Press the DOWN Arrow button (5) or the UP Arrow button (6) to scroll through the Service Test Instruction pages (9). The sliding indicator of
the Non-Interactive Scroll Bar (8) will move along with the page.
Note: Read the Service Test Instruction pages carefully. Refer to the “Testing and Adjusting” section in this Systems Operation manual for
detailed instructions for the Ground Fault Test. The instructions are found in “Tractor Ground Fault Service Test”.
Note: To abort a Service Test, refer to the “Testing and Adjusting” section in this Systems Operation manual. The instructions are found in “Tractor
Ground Fault Service Test”.
AP500E, AP555E, BG500E, and BG555E Asphalt Pavers: Troubleshooting, KENR6691 , "AP500E, AP555E, BG500E, and BG555E
Asphalt Pavers"
AP600 and AP655 Asphalt Pavers and SE50 V XW and SE50 VT XW Asphalt Screed: Troubleshooting, UENR5500, "AP600 and AP655
Asphalt Pavers and SE50 V XW and SE50 VT XW Asphalt Screeds Machine Electrical System"
AP1000 and AP1055 Asphalt Pavers and SE60 Asphalt Screed: Troubleshooting, UENR3864, "AP1000 and AP1055 Asphalt Pavers and
SE60 Asphalt Screed Machine Electrical System"
Illustration 5 g06001347
(10) ABORT button
(11) NEXT button
1. Press the NEXT button (11) to advance to the next System Test page.
Illustration 6 g03883378
2. Click the NEXT button (11) to turn ON the Low Voltage Diagnostic Power Supply.
Illustration 7 g03883383
3. Click the NEXT button (11) to turn OFF the Low Voltage Diagnostic Power Supply.
Illustration 8 g03883389
4. Click the NEXT button (11) when the tests are complete.
5. Press the ABORT button (10) to discontinue the System Test procedure.
Illustration 9 g06001354
(12) OK button
(13) BACK button
6. When the ABORT button is pressed, a screen will display asking, "Are you sure you want to abort?". Press the "OK" button (12) to abort the
procedure. Press the BACK button (13) to return to the previous test page.
Illustration 10 g06001361
(7) OK button
7. On the "Service Test Unsuccessful" screen, press the "OK" button (7) to acknowledge discontinuation of the System Test.