Professional Documents
Culture Documents
BQJVPA
BQJVPA
BQJVPA
Construction
Pump 800−BQJV is of vertical single−stage type, with a mixed
flow impeller.
Pump rotor consists of an open mixed flow impeller mounted
on the shaft cylindrical end and locked with a nut. Rotor is
supported on two bearings. Lower bearing with rubber lining is
lubricated with a pumped liquid, upper thrust rolling−contact
bearing is oil−lubricated. In journal bearing and in a seal there
the shaft is protected with replaceable sleeves.
Pump stator consists of a suction bell, pre−fixed diffuser, suc−
tion reducer, diffuser and branch elbow. Branch elbow is situat−
ed under the pump suspension bed plate. In the suspension
bed plate there is the seal space accessible through two holes
being provided in the jacket.
Pre−fixed diffuser − it is an equipment modifying flow of a pump−
ed liquid even before its entry into the impeller. With the pre−
fixed diffuser vanes reasonable adjusting there flow direction
of a liquid streaming to the impeller may be changed and thus
specific energy value and a pumped liquid through−flow chan−
ge is ensured even within the pump operation.
Regulating mechanism is controlled by an electrical servomo−
tor of „MODACT“ type. Regulating force is transmitted through
a motion screw and a regulating ring with the aid of a lever
mechanism onto the pre−fixed diffuser vanes. Regulating devi−
ce is equipped with limit switches and quick−break ones al−
lowing remote control.
Vertical mixed flow pumps 800−BQJV
Pump dimensions
560
915
355
800
1870x1300
DN 800; PN 6
640
2020
MIN. 900
3950
600
840
410
250 430
∅1125
550
100
50 +40°
−50°
0
500 600 700 800 900 1000 1100 1200 1300 1400 1500
Q [I.s−1]