Professional Documents
Culture Documents
List of Parts
List of Parts
50012503
LIST OF PARTS
FOR
Dosimat feeder
A2-130x3.4 LI
HALONG 05-039076
Parts List
Explanation
B) Index Section:
General Assembly - identified general assembly drawing(s) associated with parts list.
00.00, Revision List - identifies parts list pages revised after initial release.
00.01, Section List - identifies all sections of the parts list, including index sections that are applicable.
00.02, Drawing List - identifies drawings necessary for the erection of equipment.
00.03, SPL List - identifies all Separate Parts Lists used within parts list.
00.04, Motor List - identifies motors applicable to this equipment.
00.05, Air and Water Requirements - identifies air and water requirements for this equipment.
00.06, Lubricants - identifies lubricants required for this equipment.
00.07, Supplied Spares - identifies spare components that are supplied with this equipment as part of the order.
00.08, Recommended Spare Parts - identifies spare parts recommended to be on hand for future use.
00.09, Instruments - identifies instruments applicable to this equipment.
00.10, Instructions - identifies instructions applicable to installation, operation and maintenance.
Not all index sections are used on all parts lists. Index sections that do not apply will be identified
as "NOT USED".
The following pages are the main element sheets with the actual contents of the parts list.
Line Numbers - located in the left and right margins. These numbers are the "main key" to the parts list. Each
number identifies a line of the parts list and corresponds to the last two digits of the eight digit position number
shown on assembly drawings. The first two digits identify the section, the next two digits identify the sub-section,
the next two digits identify the sheet, and the last two digits identify the line number of the parts list.
Column 1: Description - provides a brief description of a component of the equipment.
Column 2: No. Req. - provides the quantity of a component needed for the equipment.
Column 3: Drawing - provides the drawing number or separate parts list number associated to the component
described.
Column 4: Code Dim. Manuf. (Pat) - provides the code for purchased parts, bolts, screws, fittings, etc. (see
7.000001) or designation of elements. The Dim provides numerical values which must be used corresponding
to dimensions on a tabulated standard part drawing. The Manuf. specifies commercially available elements
according to a specific trade name and model. The (Pat) identifies the pattern number for an element.
Column 5: Mat. Code - states a material code of the material to be used for the element. The code refers to a
material data sheet in the F.L.Smidth material list. Alternatively a specific material specification may be included
on the drawing. If the two codes or specifications are different, this parts list specification shall be used.
Column 6: Total - indicates total weight for the quantity of components listed. The weight is rounded up to a whole
number.
Information Concerning
MANUFACTURE and SHIPMENT
"Number Required" applies to one machine only Weight of complete machine 4875 kg
INSTRUCTION MANUALS
"Mat." Code refers to F.L.Smidth Standard for manufacture and shipment designations
material specifications unless noted otherwise.
No.
SPECIAL TOOLS for manufacture 520530 GENERAL WORKSHOP INSTRUCTION
19691 SHIPMENT
To be stamped
Serial Number Quantity Machine Type and Size To be placed on
30000584, Mark 1 See the main arrangement (00.02.01.01)
CE-4 0
20001047, Mark I 1 Parts list: 50012503 See the main arrangement (00.02.01.01)
The explanatory text for the purchase part code number (consisting of four digits + dimension) is included in the document:
"Code for Purchase Parts" No. 7.000001.
x) in a column on parts list sheets indicates that there is a pertinent remark at the foot of the sheet.
Open dimensions are specified on a drawing as a variable letter dimension. Specific order dimensions are contained in the parts list
dimension column.
DO NOT USE ANY PREVIOUSLY RECEIVED DOCUMENT, USE ONLY THE DOCUMENT RECEIVED WITH THE ORDER.
Dosimat feeder 50012503
No. Section: 00.00
A2-130x3.4 LI
Product code 000 Sheet no: 01
Revision list
Section number
Description and sheet number Revision number & revision date
01 MANUFACTURE AND SHIPMENT INFO. 1 01
30-SEP-05
02 02
03 03
04 04
05 05
06 06
07 07
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
Sign GAN Date 30-SEP-05
Dosimat feeder No. 50012503 Section: 00.01
A2-130x3.4 LI
Product code Sheet no: 01
Section list 000
Section Number of Section
Description number sheets Weight kg Release date
05 05
06 06
07 07
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) in SUPPLY denotes split supply Original 30-SEP-05 GAN
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
Original 30-SEP-05 GAN
02 02
Stationary funnel 1 20014369 X) 334
03 03
PN 918683
04 04
Movable funnel 1 10036344 X) 187
05 05
PN 918688
Angle iron 1 30009966 1100 9
06 06
PN 918690
Screw 2 0223. M16×40 8.8 CS 0
07 07
PN 1023
Nut 2 0113. M16 8 0
08 08
PN 545
Washer 2 0701. M16 0
09 09
PN 556
Scraper plate 1 30009819 3100 23
10 10
PN 918691
Screw 2 7.000021 . M16×275 2100 1
11 5.6
11
PN 918693
Nut 4 0113. M16 8 0
12 12
PN 545
Washer 6 0701. M16 0
13 13
PN 556
Screw 16 0303. M16×45 8.8 2
14 14
PN 514
Nut 16 0113. M16 8 1
15 15
PN 545
Washer 16 0701. M16 0
16 16
PN 556
Clevis pin 2 4.205855 1130 1
17 17
PN 637919
Washer 2 0704. M30 Steel 0
18 18
PN 41105
Split pin 2 0840. 8×63 0
19 19
PN 394925
Lubricating nipple 2 7.000110 . 1/8 0
20 20
PN 8783
Guide 2 30009967 1100 1
21 21
PN 918698
Screw 6 0223. M16×35 8.8 1
22 22
PN 1043
Washer 6 0701. M16 0
23 23
PN 556
X) Line Sign GAN Date 30-SEP-05 Total 560
03 05 : 1100, 3100
02 02
03 03
Sidesection 2 2.217244 1100 92
04 04
PN 918713
Hinge bearing 2 . . SKF GE 30 ES-2RS 1
05 05
PN 433164
06 06
07 07
08 08
09 09
10 10
Screw 16 0303. M16×45 8.8 2
11 11
PN 514
Nut 16 0113. M16 8 1
12 12
PN 545
Washer 16 0701. M16 0
13 13
PN 556
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 96
02 02
Frame, right side 1 10001595 1100 157
03 03
PN 918840
04 04
Frame, left side 1 10001597 1100 157
05 05
PN 918844
06 06
Frame bracing 1 2.153122 1100 32
07 07
PN 918846
Front frame bracing 2 2.153184 1100 60
08 08
PN 918851
Rear frame bracing 1 2.153121 1100 34
09 09
PN 918857
Bushing 2 3.207066 1130 3
10 10
PN 918861
Screw 32 0303. M16×40 8.8 3
11 11
PN 2745
Nut 32 0113. M16 8 1
12 12
PN 545
Washer 32 0701. M16 0
13 13
PN 556
14 14
Chain support 2 2.233278 1100 62
15 15
PN 918864
Apron belt support 1 30009821 1100 11
16 16
PN 918865
Slide for roller chain 2 3.219238 . . MURLUBRIC MURFELDT 14
17 17
PN 918867 KUNSTSTOFFE
18 18
19 19
Screw 24 0303. M10×16 8.8 1
20 20
PN 55476
Bolt 40 0213. M12×45 8.8 2
21 21
PN 638760
Nut 40 0113. M12 8 1
22 22
PN 518
Washer 40 0701. M12 0
23 23
PN 519
X) Line Sign GAN Date 30-SEP-05 Total 538
02 02
Lamella 86 2.163942 1100 1066
03 03
PN 867659
04 04
Screw 344 0343. M10×30 8.8 7
05 05
PN 27976
Self-locking nut 344 0151. M10 5 4
06 06
PN 15472
Spring washer 344 0720. M10 1
07 07
PN 1036
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 1078
02 02
Stationary shaft 1 3.132976 1130 85
03 03
PN 919500
Flanged slide bearing bushing 2 . . SKF GLY.PBG 353916 F 0
04 04
PN 867517
Assembly drawing 2.163920
05 05
Chain wheel 2 2.145546 1130 58
06 06
PN 867566
Hub 2 3.132975 1100 20
07 07
PN 919506
Tension spindle 2 3.207065 1130 4
08 08
PN 919508
Bearing 4 . . SKF 6217 7
09 09
PN 867671
Locknut 2 . . SKF KM 17 1
10 10
PN 867679
Lockwasher 2 . . SKF MB 17 0
11 11
PN 867683
Distance bushing 2 4.101667 1100 1
12 12
PN 671375
Pressure ring 2 3.207067 1100 1
13 13
PN 919433
Bearing cover 2 3.132978 1100 8
14 14
PN 919511
Lubricating nipple 2 7.000110 . 1/8 0
15 15
PN 8783
Screw 16 0303. M10×30 8.8 0
16 16
PN 28721
Lock nut 2 7.000017 . M30 2 1110 0
17 17
PN 690774
Retainer bearing 4 3.124160 1100 6
18 18
PN 919513
Pressure bushing 2 3.207064 1130 10
19 19
PN 919517
Cover 2 3.124162 1100 3
20 20
PN 919518
21 21
Circlip 2 8500. 80×2.5 0
22 22
PN 451247
Screw 2 0303. M12×30 8.8 0
23 23
PN 2418
X) Line Sign GAN Date 30-SEP-05 Total 204
02 02
Shaft 1 20000677 2120 114
03 03
PN 919520
Chainwheel/Hub assembly, Left 3.207734
04 04
Chainwheel/Hub assembly, Right 3.207562
05 05
Chain wheel 2 2.145546 1130 58
06 06
PN 867566
Hub 2 3.207546 1100 36
07 07
PN 867569
08 08
Bearing 2 . . SKF 22220 EK 10
09 09
PN 752909
10 10
Flanged bearing housing 2 . . SKF 722520B 36
11 11
PN 919532
Adapter sleeve 2 . . SKF H 320 3
12 12
PN 486581
Locating ring 1 . . SKF FRB 10/180 0
13 13
PN 428122
Felt seal 4 . . SKF FS 370 0
14 14
PN 867695
15 15
Screw 8 0223. M8×25 8.8 0
16 16
PN 13007
17 17
Bolt 8 0213. M20×80 8.8 2
18 18
PN 962
Nut 8 0113. M20 8 1
19 19
PN 434
Washer 8 0701. M20 0
20 20
PN 693
21 21
Gib-head key 4 7.000025 . 28×125 2022 2
22 22
PN 919562
23 23
X) Line Sign GAN Date 30-SEP-05 Total 262
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 281
04 : 20MnCrS5 or 20MnCr
11 : Carbon spring steel
02 02
Bracket 2 3.120479 1100 16
03 03
PN 919646
Retainer iron 2 4.093841 2001 1
04 04
PN 919648
Weigh cell X) 2
05 05
PN 925933
Connection piece 2 3.120480 1100 1
06 06
PN 919650
07 07
Rigging screw X) 2 . . FYNS KRANUDSTYR 26400060 15
08 08
PN 919672
Wire rope X) 2 . ø9mm×0.7m . FYNS KRANUDSTYR 4
09 09
PN 919674
10 10
Screw 4 0223. M12×60 8.8 0
11 11
PN 26209
Self-locking nut 4 0151. M12 5 0
12 12
PN 15056
Washer 8 0701. M12 0
13 13
PN 519
Screw 2 0305. M12×45 12.9 0
14 14
PN 910780
15 15
Screw 8 0303. M16×60 8.8 1
16 16
PN 35608
Nut 8 0113. M16 8 0
17 17
PN 545
Washer 4 0701. M16 0
18 18
PN 556
Square taper washer 4 0710. M16 0
19 19
PN 8152
20 20
Erection bracket 2 3.124170 1100 28
21 21
PN 919653
Screw 4 0223. M16×60 8.8 0
22 22
PN 1401
23 23
X) Line Sign GAN Date 30-SEP-05 Total 66
05 : To be supplied by electrical dept.
08 : Fork, eye
09 : Thimple, thimple
01 01
Bolt 2 0213. M16×65 8.8 0
02 02
PN 9190
Self-locking nut 2 0151. M16 ISO 5 0
03 03
PN 15054
Washer 4 0701. M16 0
04 04
PN 556
05 05
Screw 4 0303. M12×70 8.8 0
06 06
PN 30852
07 07
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total
02 02
Bracket 1 4.206094 1100 2
03 03
PN 919700
Mounting plate 1 4.205863 1100 0
04 04
PN 919701
05 05
Lubrication pump 1 . . Lincoln 203CS-4YNBOE1-1K6-24-F1V 8
06 06
PN 919703
Safety valve 1 . . Lincoln 604-27158-1
07 07
PN 919704
08 08
Metering device SSV 8-K 1 . . 619-25754-4 LINCOLN 1
09 09
PN 899579
10 10
Male connector 1 . . LINCOLN GE6-LLR 1/8 KC 0
11 11
PN 919705
12 12
Coupling nut 4 . . Lincoln 223-12374-9 0
13 13
PN 649724
Ferrule 4 . . Lincoln 223-12295-2 0
14 14
PN 649725
Valve body 6mm 4 . . Lincoln 504-30364-3 0
15 15
PN 725445
Clamping ring 4 . . Lincoln 404-23034-1 0
16 16
PN 649723
Elbow union 4 . ø6-9-0162 . Lincoln 0
17 17
PN 919713
Closure plug 4 . . LINCOLN 303-175301 0
18 18
PN 919719
Washer 4 . . LINCOLN 209-12464 0
19 19
PN 919773
20 20
Copper tube 8 2186. 6mm×0.8mm,L=6.0m 6
21 21
PN 919775
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 17
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total
02 02
Support for torque arm 2 2.153143 1100 24
03 03
PN 921898
Torque arm 2 30000369 1100 33
04 04
PN 921903
Shim 2 4.093831 1100 4
05 05
PN 921904
06 06
Shaft 2 4.093821 2001 2
07 07
PN 921906
Split pin 4 0840. 5×63 0
08 08
PN 721713
Bushing for torque arm 2 . . Type 40×65×88 No. 309437 Flender 0
09 09
PN 707961 Bocholt
Washer 4 7.000079 . 40 1100 1
10 10
PN 38254
Screw 8 0303. M16×50 8.8 1
11 11
PN 35373
Nut 12 0113. M16 8 0
12 12
PN 545
Washer 24 0701. M16 0
13 13
PN 556
Screw 4 0303. M16×70 8.8 1
14 14
PN 32787
Gear including shrink disk, motor flange & 2 194
15 15
coupling PN 922101
Motor X) 2
16 16
PN 922104
Screw 30 0303. M12×60 8.8 2
17 17
PN 5623
Nut 30 0113. M12 8 0
18 18
PN 518
Washer 30 0701. M12 0
19 19
PN 519
Locking Assembly 2 . 125×215 . Ringfeder RFN 4071 16
20 20
PN 922098
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 278
16 : To be supplied by electrical department.
02 02
Screening of coupling 2 20000748 1100 5
03 03
PN 922114
Screw 12 0220. M8×25 4.6 0
04 04
PN 27142
Nut 12 0100. M8 5 0
05 05
PN 1949
Washer 24 0700. M8 0
06 06
PN 2234
07 07
Chain scraper screen 1 2.156917 X) 20
08 08
PN 922119
Chain scraper screen 1 2.156918 X) 20
09 09
PN 922130
Chain scraper screen 1 2.233279 X) 21
10 10
PN 922134
Chain scraper screen 1 2.233280 X) 21
11 11
PN 922138
Chain scraper screen 1 2.154358 X) 15
12 12
PN 922141
13 13
Screw 24 0220. M10×25 4.6 1
14 14
PN 2086
Screw 31 0220. M10×30 4.6 1
15 15
PN 8347
Nut 55 0100. M10 5 1
16 16
PN 1106
Washer 86 0700. M10 0
17 17
PN 1033
18 18
Apron belt screen 1 2.233281 X) 8
19 19
PN 922147
Apron belt screen 1 2.233282 X) 8
20 20
PN 922149
Apron belt screen 1 20014332 X) 14
21 21
PN 922151
Apron belt screen 1 20014337 X) 14
22 22
PN 922154
Apron belt screen 1 10036277 X) 25
23 23
PN 922155
X) Line Sign GAN Date 30-SEP-05 Total 174
08 09 10 11 12 19 20 21 22 23 : 1100, 3mm perforated metal sheets, model 409-
013, from RICH.MULLER.
07 07
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 3
01 : 1100, 3mm perforated metal sheets, model 409-013, from RICH.MULLER.
02 02
Frame 1 2.220206 1100 400
03 03
PN 922178
04 04
05 05
06 06
Rod 80 1.229811 X) 472
07 07
PN 922180
08 08
Screw 48 0223. M20×50 8.8 9
09 09
PN 1268
Nut 48 0113. M20 8 3
10 10
PN 434
Washer 48 0701. M20 1
11 11
PN 693
Square taper washer 48 0710. M20 3
12 12
PN 14235
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 888
07 : 1100 / 2100
02 02
Frame 1 10037976 1100 42
03 03
PN 922198
Frame 1 3.219241 1100 6
04 04
PN 922209
Frame 1 3.219242 1100 6
05 05
PN 922213
06 06
Plate 2 30010200 1100 52
07 07
PN 922218
08 08
Plate 1 3.219244 1100 32
09 09
PN 922234
Plate 1 20014975 1100 102
10 10
PN 922235
Plate 1 3.124194 1100 45
11 11
PN 922239
12 12
Support 2 30009855 1100 31
13 13
PN 922242
14 14
Rubber sheet 1 30010263 X) 7
15 15
PN 922243
Retainer Iron 1 30010262 1100 4
16 16
PN 922250
Screw 11 0223. M12×30 8.8 0
17 17
PN 686
Spring washer 11 0720. M12 X) 0
18 18
PN 1277
19 19
20 20
Observation door 1 4.217356 1100 3
21 21
PN 418150
Screw 1 0303. M12×30 8.8 0
22 22
PN 2418
Washer 1 0701. M12 0
23 23
PN 519
X) Line Sign GAN Date 30-SEP-05 Total 330
15 : Rubber ISO quality SBR 50-90 (styrine rubber)
18 : Spring steel HV 430-530
06 06
Screw 16 0223. M16×50 8.8 2
07 07
PN 1150
Nut 16 0113. M16 8 1
08 08
PN 545
Washer 16 0701. M16 0
09 09
PN 556
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 39
02 02
Scraper shaft for suspension right 1 3.124151 1100 9
03 03
PN 922304
Scraper shaft for suspension left 1 3.124152 1100 9
04 04
PN 922306
Scraper shaft 1 3.124153 X) 32
05 05
PN 922308
06 06
Scraper 12 3.124154 2400 4
07 07
PN 867630
Torque arm 2 3.124155 1100 2
08 08
PN 922314
Washer 12 4.093829 1100 4
09 09
PN 922312
10 10
Screw 2 0223. M12×80 8.8 0
11 11
PN 25415
Nut 4 0113. M12 8 0
12 12
PN 518
Screw 2 0223. M12×50 8.8 0
13 13
PN 4517
14 14
Set screw 4 0515. M10×20 45 H 0
15 15
PN 9328
Screw 24 0223. M12×20 8.8 1
16 16
PN 23809
17 17
Screw 4 0223. M16×60 8.8 0
18 18
PN 1401
Nut 4 0113. M16 8 0
19 19
PN 545
Washer 8 0701. M16 0
20 20
PN 556
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total 61
05 : 1100, 2100
Chain scraper X) 1
01 01
PN 1157141
02 02
03 03
04 04
05 05
06 06
07 07
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
X) Line Sign GAN Date 30-SEP-05 Total
01 : See separate order