Professional Documents
Culture Documents
Hohsing Gd60-9 Models: M S M S
Hohsing Gd60-9 Models: M S M S
Hohsing Gd60-9 Models: M S M S
GD60 HAS TWO-DIGIT DISPLAY. THERE ARE TWO BUTTONS BELOW DIGIT DISPLAY. LEFT IS THE M BUTTON. RIGHT IS THE S BUTTON, PRESS THE
M BUTTON TO CALL THE PARAMETER SETTING NUMBER
M 01 S M S
SPEED Push Push Push Push
to show speed (Speed) to change to change speed to confirm
parameter 01 parameter setting showing 2 digit x 100rpm
M 03 S M S
DIRECTION Push Push Push Push
to show direction (Direction) to change to change direction to confirm
setting parameter 03 parameter setting C = clock wise, CC= counter clockwise
② M 17 S M S
Push Push Push Push
to show condensed stitch function to change to change ON to confirm
setting parameter 17 parameter setting
NC100J, ③ M 18 S M S
NC1001SJ Push Push Push Push
to show stitch amount of condensed stitch to change to change stitch number to confirm
condensed stitch setting parameter 18 parameter setting
setting
④ M 19 S M S
Push Push Push Push
to show stitch amount of after condensed stitch
to change to change stitch number to confirm
setting parameter 19 parameter setting after condensed stitch
⑤ M 20 S M S
Push Push Push Push
to show condensed stitch spped to change to change speed to confirm
setting parameter 20 parameter setting showing 2 digit x 100rpm
HOHSING HVP90, i70, i90 MODELS 2017/9/14
DIRECTION
PUSHING P &POWER ON 046 H CLOCKWISE: d I r . C R
(DIRECTION)COUNTER CLOCKWISE: d I r . C c R
DECIDE WITH
S
② PUSHING
P
&POWER ON 95 H PUSHING
S OFF → ON
FIND C/CW
DIRECTION PUSHING
M &POWER ON DECIDE WITH
S
WITH M
DECIDE
UP OR
NEEDLE POSITION PUSHING S &POWER ON DOWN DECIDE WITH
S
WITH M
PRESSER FOOT UP
C8: OFF / BS: OFF / ES: OFF
WHEN STEP ON HEEL SIDE
MAX rpm 3 4
4500 ON ON
SPEED +
3500 ON OFF
2500 OFF ON
CHANGE 5 SWITCH
DIRECTION 5
DIRECTION CLOCKWISE ON
NEEDLE POSITION 6
NEEDLE
UP ON
POSITION DOWN OFF
CHANGE 7 SWITCH
SLOW START 7
etc. UP ON
DOWN OFF