Professional Documents
Culture Documents
Series P1L: High Performance Repairable Pneumatic Cylinder
Series P1L: High Performance Repairable Pneumatic Cylinder
Series P1L: High Performance Repairable Pneumatic Cylinder
Catalog: SB0924
Effective: May 2001
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from the Company, its subsidiaries and authorized distributors provide product and/or system options for further investigation
by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information
concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user,
through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and
warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by the Company
and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by the Company, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated on the separate page of this document entitled "Offer of Sale".
Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L General Specifications
Contents
General Specifications 1 Nose Mount Dimensions 20-21
Features 2-3 Double Rod 22-23
Basic No Mounts Dimensions 4-5 Material Specifications & Repair Kits 24
Single Rear Clevis Dimensions 6-7 Maintenance Information 25
Double Rear Clevis Dimensions 8-9 Technical Information 26
Foot Mount Dimensions 10-11 Flow Controls, Port Accessories 27
Front Flange Dimensions 12-13 Mounting Kits 28-34
Rear Flange Dimensions 14-15 Rod End Accessories 35
Front Trunnion Dimensions 16-17 Sensors 36-37
Rear Trunnion Dimensions 18-19 How to Order 38-39
Offer of Sale 40
Specifications
• Bore Sizes: 20 to 100mm (3/4 ” to 4 ”) • Rated Air Pressure: 10.3 bar (150 psi) Non-Lube
• Rod Diameters: 8 to 32mm (5/16" to 1-1/4") • Standard Temperature: - 23° C to + 74° C (- 10° F to + 165° F)
• Rod Ends: Four Standard, specials to order • Optional High Temp Service: -23°C to +121°C (-10°F to +250°F)
• Bumpers: Standard on both ends • Adjustable Cushions: provided at both ends as an option
• Single End or Double End Mounting • Strokes: available in any practical stroke length
• Mounting Styles: 9 standard
Available Mountings
1 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Features Series P1L
The Series P1L is a fully-featured air cylinder in a sleek, compact package. This modern design cylinder is
available in bore sizes 20, 25, 32, 40 50, 63, 80 and 100 mm. Stroke lengths and rod ends are custom-made
to the order without delivery time penalties.
Quality threaded end cap construction, sleek round-body profile, short overall length, custom stroking, and
heavy duty bearing system make the Series P1L your first choice for flexible, value-based machine design.
The Series P1L is an integral part of any pneumatic system where space-efficiency, high-speed performance
and long operating life are important. All this at a fraction of the cost of other repairable air cylinders.
Tapped Mounting Holes Holes allow for flush mounting from the head or cap face. Standard mounting
2 Mounting holes can be inch or metric. kits can be bolted-on for adapting to a wide range of applications.
Ports
3 Optional porting styles to meet application requirements. Faster piston speeds.
Optional NPTF or BSPT ports provide full air flow to piston.
Adjustable Cushion Option Feature fine-thread, brass needle valves with a captive design. Needle valves
4 Available for high speed applications. are recessed into head on all sizes except 20 and 25mm bores.
Piston is permanently sealed and locked to rod with anaerobic adhesive. Ultra
5 Aluminum Piston with Ultra-Wide Nylon Wear Band wide wear band prevents metal-to-metal contact and distributes piston loads
across wide bearing area.
Optional Piston Magnet For use with through-the-barrel sensors for electronic piston position indication.
6 Does not add length to the piston.
Located under wear band.
Z-Profile Piston Seal Z-Profile seal is a dynamic piston seal having dual contact points for maximum
7 Polyurethane piston seal features two rounded micro sealing wear compensation and rounded micro grooves for retaining lubrication. The thin
edges. seal profile minimizes cylinder overall length, while maximizing bearing length.
Bumpers
8 Impact resistant urethane bumpers are standard for all bore Provide noise reduction and impact resistance in every bore size.
sizes.
High Strength Rod Bearing Long rod bearing provides rigid support of piston rod while minimizing bearing
9 stress. Rod bearing is inboard of rod seal to ensure positive lubrication.
PTFE-coated bronze rod bearing is inboard of rod seal.
Piston Rod
10 Ground, polished hard chrome plated steel piston rod. Smooth rod surface finish provides minimum friction and maximum seal life.
Stainless steel is standard on 20 and 25mm bore.
Four Standard Piston Rod Ends Optional rod end styles to meet application requirements. Specials provided as
11
Inch or metric with male or female required.
Rounded Lip Rod Wiper Seal
Eliminates leakage and prevents contamination from entering cylinder. Rounded
12 Non-lube, urethane rod seal provides dual function as rod
lip profile removes the need for external lubrication.
seal and rod wiper
Cylinder Body Clean, tubular design eliminates areas where contamination can accumulate.
13 Anodized tube provides wear-resistant surface.
Smooth anodized aluminum tube on OD and ID
2 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Features
4
6 5
3
9
12
10
8
11 13
1
2
Benefits
Flexible rod end styles to meet special requirements without delivery time
penalties.
3 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Basic No Mounts Dimensions Series P1L
Style N ZB+STROKE
Basic No Mounts LB+STROKE
Typical 20 to 100 mm Bore
Y P+STROKE
DD THREAD x BG DEEP
(8) PLACES WF EE PORT
(2) PLACES
ØMM
ØE
ØB
ØB
R
V V
R
GH
With adjustable air cushion - 32 to 100 mm bores (feature a flush-fit cushion adjustment screw)
∞ G∞
GC
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
4 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Basic No Mounts Dimensions
5 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Single Rear Clevis Dimensions Series P1L
Style B
Single Rear Clevis
Typical 20 to 100 mm Bore
XC+STROKE
LB+STROKE
Y P+STROKE L
M
WF EE PORT G
(2) PLACES
CE
CT
CH
ØSB
HOLE
V
CM CN
CY
CW CX
CZ
ZX + STROKE
Mounting Bracket
Note : Mating Mounting Bracket and Pin must be ordered as separate items
A
LAF
WF
A WF
V V
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
6 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Single Rear Clevis Dimensions
7 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Double Rear Clevis Dimensions Series P1L
Style A
Double Rear Clevis
Typical 20 to 63 mm Bore
LB+STROKE
Y P+STROKE L RR
CZ
EE PORT CB
WF (2) PLACES C CB
ØCD (PIN O.D.)
ØMM
ØB
ØE
TE
TH
V
TY TX
TV ØSB HOLE
TW (4) PLACES
TZ
XC+STROKE
Mounting Bracket
Style A ZD+STROKE
TE
TH
CB
TY CX
ØSB HOLE
TW TX (4) PLACES
XC+STROKE
TV
ZD+STROKE
Mounting Bracket
Note: Mating Mounting Bracket and Pin must be ordered as separate items.
Rod End Details
MALE THREADS FEMALE THREADS
Inch Male - Style N Inch Female - Style 9
LAF A
Metric Male - Style 5 Metric Female - Style 6
WF
A WF
V V
KF
KK
SPECIAL ROD END THREADS
Thread Style 3
Special Metric or Inch threads,
extension, blank, etc., are also ØB NA ØMM ØB NA ØMM
available.
8 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Double Rear Clevis Dimensions
9 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Foot Mount Dimensions Series P1L
Style F
Foot Mount
Typical 20 to 100 mm Bore
LB+STROKE G
Y P+STROKE
WF EE PORT AT
(2) PLACES
ØMM
ØE
AE
AH
ØSB SLOT
TF SW SU SU SW
UF SS+STROKE
LAF A
WF
A WF
V V
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
10 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Foot Mount Dimensions
ADD STROKE
Bore SU SW TF UF V WF Y LB P SS
20 14 11 38 48 2 13 28 69 45 97
25 14 11 38 48 2 16 30 69 46 97
32 19 19 48 63.5 2 22 40 71 43 109
40 18 20 48 63.5 2 22 42 78 49 114
50 25 16 57 79 2 30 53 90 53 140
63 25 16 73 95 2 30 53 90 52 140
80 28.5 14 100 125 3 31 59 108 64 165
100 30 16 120 150 3 31 57 108 66 168
25 0.56 0.44 1.50 1.88 0.08 0.62 1.18 2.70 1.81 3.82
32 0.75 0.75 1.88 2.50 0.08 0.88 1.57 2.78 1.69 4.28
40 0.72 0.78 1.88 2.50 0.08 0.88 1.65 3.06 1.93 4.50
50 1.00 0.62 2.24 3.12 0.08 1.19 2.09 3.53 2.09 5.53
63 1.00 0.62 2.88 3.75 0.08 1.19 2.09 3.53 2.05 5.53
80 1.12 0.55 3.94 4.92 0.12 1.22 2.32 4.25 2.52 6.49
100 1.18 0.63 4.72 5.91 0.12 1.22 2.24 4.25 2.60 6.61
11 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Front Flange Dimensions Series P1L
Style J
Front Flange
Typical 20 to 100 mm Bore
ZB+STROKE
LB+STROKE
ØFB HOLE
(4) PLACES
Y P+STROKE
V EE PORT
(2) PLACES
ØMM
ØB
UF
TF
ØE
ØB
V
W
F
TF
WF
UF
LAF A
WF
A WF
V V
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
12 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Front Flange Dimensions
ADD STROKE
Bore LB P ZB
20 69 45 83
25 69 46 86
32 71 43 95
40 78 49 102
50 90 53 122
63 90 52 122
80 108 64 142
100 108 66 142
13 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Rear Flange Dimensions Series P1L
Style H
Rear Flange
Typical 20 to 100 mm Bore
ZF+STROKE
WF EE PORT
(2) PLACES
ØMM
ØB
UF
ØB
TF
ØE
V V
F TF
UF
LAF A
WF
A WF
V V
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
14 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Rear Flange Dimensions
ADD STROKE
Bore LB P ZF
20 69 45 87
25 69 46 91
32 71 43 100
40 78 49 108
50 90 53 129
63 90 52 129
80 108 64 150
100 108 66 153
15 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Front Trunnion Dimensions Series P1L
Style E
Front Trunnion
Typical 20 to 100 mm Bore
ZB+STROKE
LB+STROKE
UT
Y P+STROKE
BT THREAD
(2) PLACES TS EE PORT
WF (2) PLACES
ØMM
ØE
ØB
TE
(2) PLACES
(PIN O.D.)
TC
ØTD
TX TY
TT
TV ØSB HOLE XG
(4) PLACES Trunnion Bracket
TW
LAF A
WF
A WF
V V
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
16 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Front Trunnion Dimensions
ADD STROKE
Bore ØTD e8 TE TS TT TV TW TX TY UT LB P ZB
20 8 38.5 28 3 35 42 16 28 47.5 69 45 83
25 10 46 33 3 39 42 20 28 53 69 46 86
32 12 54.5 40 4.5 49 48 22 28 68 71 43 95
40 14 64 49 4.5 58 56 30 30 79 78 49 102
50 16 79.5 60 6 72 64 36 36 99 90 53 122
63 18 96 74 8 90 74 46 46 119 90 52 122
17 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Rear Trunnion Dimensions Series P1L
Style D
Rear Trunnion
Typical 20 to 100 mm Bore
ZB+STROKE
LB+STROKE
UT
Y P+STROKE
BT THREAD
EE PORT (2) PLACES
TS
WF (2) PLACES
ØMM
ØE
ØB
TE
(2) PLACES
(PIN O.D.)
TC
ØTD
V
TY
TX
TT
TW
TV
XJ+STROKE ØSB HOLE
(4) PLACES
ZD+STROKE
Trunnion Bracket
LAF A
WF
A WF
V V
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
18 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Rear Trunnion Dimensions
ADD STROKE
Bore TE TS TT TV TW TX TY UT LB P XJ ZB ZD
20 38.5 28 3 35 42 16 28 47.5 69 45 70 83 91
25 46 33 3 39 42 20 28 53 69 46 73 86 94
32 54.5 40 4.5 49 48 22 28 68 71 43 83 95 107
40 64 49 4.5 58 56 30 30 79 78 49 90 102 118
50 79.5 60 6 72 64 36 36 99 90 53 108 122 140
63 96 74 8 90 74 46 46 119 90 52 108 122 145
(mm) TE TS TT TV TW TX TY UT LB P XJ ZB ZD
20 1.51 1.10 0.12 1.39 1.66 0.63 1.10 1.87 2.70 1.77 2.77 3.28 3.60
25 1.81 1.30 0.12 1.55 1.66 0.79 1.10 2.09 2.70 1.81 2.89 3.40 3.72
32 2.15 1.58 0.18 1.93 1.88 0.87 1.10 2.67 2.78 1.69 3.27 3.74 4.21
40 2.53 1.93 0.18 2.28 2.20 1.18 1.18 3.10 3.06 1.93 3.54 4.02 4.64
50 3.13 2.36 0.25 2.83 2.52 1.42 1.42 3.88 3.53 2.09 4.25 4.80 5.51
63 3.78 2.91 0.31 3.54 2.91 1.81 1.81 4.69 3.53 2.05 4.25 4.80 5.71
19 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Nose Mount Dimensions Series P1L
Style G
Nose Mount ZB1+STROKE
Typical 20 to 25 mm Bore 1
LB +STROKE
Y P1+STROKE
WF
EE PORT
VA (2) PLACES
ØMM
ØBN
ØE
NN
THREADS VB
WT
N
VA
KK A VA
KF
ØBN
ØBN
D
WRENCH FLATS D
WRENCH FLATS
20 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Nose Mount Dimensions
1
ZB +STROKE
Style G 1
LB +STROKE
Nose Mount
Y P1+STROKE
Typical 32 to 63mm Bore
W F EE PORT
(2) PLACES
VA
ØMM
ØBN
ØE
NA
R
NN THREAD
VB
R WT
N
40 0.75 1.058 0.47 1.91 1/8† 0.56 7/16-20 3/8-24 2.00 0.630 1-14 1.73 0.55 1.02 0.19 0.08 1.25 0.88 2.60 3.62 1.93 4.95
50 0.88 1.374 0.63 2.32 1/4 0.59 1/2-20 1/2-20 2.07 0.787 1 1/4-12 2.17 0.71 1.26 0.12 0.08 1.19 0.81 2.68 4.12 2.09 5.39
63 0.88 1.500 0.63 2.83 1/4 0.63 1/2-20 1/2-20 2.07 0.787 1 3/8-12 2.72 0.71 1.50 0.12 0.08 1.19 0.81 2.76 4.19 2.05 5.46
†Ports are 10-32 for cushioned versions
Rod End Details - 32 and 63 mm Bore
MALE THREADS FEMALE THREADS
Inch Male - Style N Inch Female - Style 9 W F
LA F
Metric Male - Style 5 Metric Female - Style 6 KF A
A W
ØBN
ØBN
ØE
NA
ØE
NA
D
KK D WRENCH FLATS
WRENCH FLATS
SPECIAL ROD END THREADS
Thread Style 3
Special Metric or Inch threads, extension, blank, etc., are also available. To order, specify “Style 3” and give desired dimensions for KK or KF, A
and LAF or WF (Note: LAF = LA+F and WF = W+F). If otherwise special, supply a dimensioned sketch.
21 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Double Rod Dimensions Series P1L
Double-Rod ZM+ (2 x STROKE)
LG+STROKE
Y PK+STROKE
WF EE PORT
(2) PLACES
ØMM
ØMM
ØE
ØB
ØB
R
V V
R
Double-Rod
Nose Mount (32-63mm bore) ZM1 + (2 x STROKE)
1
LG +STROKE
Y1 PK 1+STROKE
W F EE PORT
(2) PLACES
ØMM
ØMM
ØE
For detailed dimensions for the nose mount from 20 to 63 mm bore, please refer to pages 20 and 21
KF
KK
ØB NA ØMM ØB NA ØMM
D D
WRENCH FLATS WRENCH FLATS
When two rod ends are different on double rod cylinder, please clearly indicate what rod end should be provided on which end of the
cylinder, or provide a sketch.
22 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Double Rod Dimensions
25 0.50 0.551 0.31 1.26 - 1/8† 5/16-24 1/4-28 1.12 0.394 1.14 - 0.65 0.08 - 0.62 1.18 1.25
32 0.75 0.709 0.39 1.53 0.37 1/8 7/16-20 5/16-24 1.63 0.472 1.42 0.43 0.79 0.08 0.88 0.88 1.57 1.93
40 0.75 0.984 0.47 1.91 0.56 1/8 7/16-20 3/8-24 1.63 0.630 1.73 0.55 1.02 0.08 1.25 0.88 1.65 2.60
50 0.88 1.181 0.63 2.32 0.59 1/4 1/2-20 1/2-20 2.07 0.787 2.17 0.71 1.26 0.08 1.19 1.19 2.09 2.68
63 0.88 1.260 0.63 2.83 0.66 1/4 1/2-20 1/2-20 2.07 0.787 2.72 0.71 1.50 0.08 1.19 1.19 2.09 2.76
80 1.50 1.575 0.79 3.54 - 3/8 3/4-16 5/8-18 2.72 0.984 3.39 0.91 1.97 0.12 - 1.22 2.32 -
100 1.88 1.968 1.02 4.33 - 1/2 1-14 3/4-16 3.11 1.260 4.17 1.18 2.36 0.12 - 1.22 2.24 -
†Ports are 10-32 for cushioned versions Double-Rod - Nose Mount (32-63mm bore)
23 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Material Specifications and Repair Kits Series P1L
Series P1L Parts Identification
12 9 4 2 11 13 8 7 5 11 1 4
10 1 3 6
Material Specifications
Symbol Description Material Specification
1 Cushion Seals Nitrile, Fluorocarbon3
2 Head and Cap Black Anodized Aluminum Alloy
3 Piston Aluminum Alloy
4 Adjustable Cushion Needle Valves Brass, Carbon Steel2
5 Wear Ring Nylon
6 Magnet Plastic Coated Magnetic Material
7 Piston Seal Polyurethane, Fluorocarbon3
8 Bumpers Urethane
9 Rod Bearing / Bushing Sintered Bronze Metal with PTFE Coating on the ID
10 Piston Rod Stainless Steel, Chrome Plated Carbon Steel1
11 O-Rings / Cylinder Body End Seals Nitrile, Fluorocarbon3
12 Rod / Wiper Seal Urethane, Fluorocarbon3
13 Cylinder Body Clear Anodized Aluminum Alloy (OD & ID Barrel)
Repair Kits
Single Rod Cylinder Repair Kits Double Rod Cylinder Repair Kits
Bore Consisting of: 1 ea. Symbol #5, 7, 12, & 2 ea. Symbol #1, 8 11, 14 Consisting of: 1 ea. Symbol #5, 7, & 2 ea.Symbol #1, 8 11, 12, 14
Size Class 1 Seals, Std. Service Class 5 Seals, High Temp. Class 1 Seals, Std. Service Class 5 Seals, High Temp.
mm Part No. Part No. Part No. Part No.
24 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Maintenance Information
4
Refer to cutaway drawing below for proper
14 Rod/Wiper Seal orientation
15 1
13 6
5
11
7
Parts Identification
Symbol Description Quantity
1 Cushion Seal 2 11
2 Head 1 8
3 Piston 1 4
4 Needle Valve 2 3
5 Wear Ring 1 14
6 Magnet 1 8 10 12
7 Piston Seal 1
8 Bumper 2
9 Rod Bearing / Bushing 1
10 Piston Rod 1 1
9
11 Cylinder Body End Seal 2
12 Rod / Wiper Seal 1
13 Cylinder Body 1
14 Needle Valve O-Ring 2
2
15 Cap 1
Maintenance Instructions
1 Disconnect the cylinder and piston rod from the machine members, following 9 Remove the piston seal (item 7) and the wear ring (item 5) from the piston.
every safety procedure as directed by the machine manufacture. Also, remove the two bumpers from the assembly (item 8). Clean and in-
2 spect the piston. If the piston is worn, replace the piston and rod assembly.
If necessary, remove the mounting brackets or flanges from the cylinder.
Note that the piston is locked and held to the piston rod with an anaerobic
3 On both the head and cap, scribe a line across the end caps and the cylinder adhesive. For safety reasons, disassembly of the piston-to-rod connection
body so as to record their original relative position. must be done only by factory trained persons.
4 Place the flats of the cap in a vice with soft jaws. 10 Lubricate the inside diameter of the bumpers (item 8) and install on piston.
5 Using a wrench across the flats on the cylinder head, unthread the head. Lubricate piston seal (item 7) and install in piston. Install wear ring (item 5).
Lubricate the outside of the wear ring, piston and the inside of the cylinder
6 If the cylinder body unthreads from the cap, place the head in the vice and body. Be careful not to damage the piston seal while installing the piston
unthread the cylinder body from the head using a strap wrench. rod assembly into the cylinder body.
7 Slip the cylinder head over the piston rod. Remove the rod/wiper seal (item 11 Lubricate and install the rod/wiper seal (item 12) in the orientation as shown
12). Thoroughly clean the head and seal grooves. Inspect the rod bearing for on the assembly drawing into the cylinder head.
wear. If the rod bearing is worn out-of-round by more than about 0.15 mm
(.006”), then replace cylinder. 12 If the cylinder is cushioned, then remove the old cushion seals using needle
-nose pliers. Lubricate and install new cushion seals (item 1) in the same
8 Clean the inside diameter of the cylinder body and inspect it for evidence of location from which the original seals were removed. Please note the proper
scoring. Light scratch marks generally do not pose a problem. cushion seal orientation from the parts I.D. drawing. Cushion seals should
be pressed securely in the groove.
13 Remove the old cylinder body end seals (item 11) from the cylinder. The
seals will be located in the end caps on bore size 32mm and smaller. On
Head and Cap Assembly Torque Table the larger bore sizes, the seals will be located on the cylinder body. Lubri-
cate the new end seals and install in the same location from which the
Bore Assembly torque (in-lbs) Assembly torque (N-m) original seals were removed. Make sure that after installation the seals are
not twisted.
(mm) Target Min Max Target Min Max 14 Lubricate the rod bearing in the cylinder head. Slip the head assembly over
20 250 100 500 28 11 57 the piston rod, being careful not to damage the rod/wiper seal. Thread the
head on to the cylinder body. Thread the cap on to the cylinder body.
25 250 100 500 28 11 57
15 Hold the flats of the cap in a vice. With a strap wrench and an open end
32 400 200 800 45 23 90
wrench, line-up the scribe marks made in step 3 on both the head and cap
40 600 400 1000 68 45 113 with the cylinder body.
50 600 300 1000 68 34 113 16 For all mounts, except style F, tighten the end caps an additional 2 degrees
63 600 400 1000 68 45 113 beyond the original position using the table below as a guide to torquing
the cylinder.
80 600 400 1000 68 45 113
100 600 400 1400 68 45 158 17 Reattach the mounting accessories following the Mounting Kit Installation
procedures.
25 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Technical Information Series P1L
Theoretical Push and Pull Forces in lbs.
Bore Rod Diameter Action Effective Area Operating Pressure (PSI)
mm mm in2 40 60 80 100 125
20 0 Extend 0.5 19 29 39 49 61
20 8 Retract 0.4 16 24 33 41 51
25 0 Extend 0.8 30 46 61 76 95
25 10 Retract 0.6 26 38 51 64 80
32 0 Extend 1.2 50 75 100 125 156
32 12 Retract 1.1 43 64 86 107 134
40 0 Extend 1.9 78 117 156 195 243
40 16 Retract 1.6 65 98 131 164 204
50 0 Extend 3.0 122 183 243 304 380
50 20 Retract 2.6 102 153 204 256 320
63 0 Extend 4.8 193 290 386 483 604
63 20 Retract 4.3 174 261 348 434 543
80 0 Extend 7.8 312 467 623 779 974
80 25 Retract 7.0 281 422 562 703 879
100 0 Extend 12.2 487 730 974 1217 1522
100 32 Retract 10.93 437 656 874 1093 1366
Use the graphs below to determine whether a cylinder will adequately decelerate a load without damage to the cylinder. Find the
point on the graph where the piston rod speed intersects the weight of the load. Any cylinder bore size above the intersect point will
adequately decelerate the load at that speed.
v 7 v 7
e 6 e 6
l 5
l 5
o o
c 4 c 4
i i
t 3 t 3
y y
F 2 F 2
P P
S S
1
2 3 4 5 6 7 8 9 10 20 30 40 10 50 100
Weight (lb) Weight (lb)
Note: Cushions are recommended for applications with cylinder velocities exceeding 1 ft/sec.
26 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Flow Controls, Port Accessories
Miniature Exhaust Flow Control
PART TUBE THREAD C HEX H H FLOW
NO. SIZE SIZE (MM) CLOSED OPEN L M DIA. D
0876300100 5/32 10-32 6 .925 1.023 .846 .669 .080
0876300200 5/32 1/8 7 1.000 1.083 .935 .708 .100
0876300300 1/4 10-32 6 .925 1.023 .885 .708 .080
0876300400 1/4 1/8 7 1.000 1.083 .957 .730 .100
0876300500 1/4 1/4 8 1.083 1.180 1.013 .748 .160
N
Microlok round body male connector M
PART TUBE PIPE BODY INTERNAL ASSM. HT. FLOW
NO. SIZE THREAD DIA. H HEX N M DIA. D
D
0876290100 1/8 10-32 .34 - .57 .49 .08 H
0876290200 5/32 1/8 .43 1/8 .56 .49 .13
0876290300 5/32 10-32 .38 - .57 .49 .08
0876290400 1/4 1/8 .47 3/16 .59 .52 .19
10-32 Thread
0876290500 1/4 1/4 .59 3/16 .51 .52 .19
0876290600 1/4 10-32 .47 - .58 .52 .08 N
M
#10-32 UNF-2A
.250 #10-32 UNF-2A
.750
Schrader Bellows
27 Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Mounting Brackets Series P1L
Single Clevis Bracket Dimensions
K H
ØCD
(PIN O.D.)
B
ØG
F
N L D
C
M
CL
CD
Note :
Two snap rings shown are included with the pivot pin.
Order clevis bracket separately.
Cylinder
Bore Fastener Size Torque
20 8-32 M4x0.7 10-12 in-lbs 1.1-1.4 N-m
25 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
32 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
40 1/4-28 M6x1 32-36 in-lbs 3.6-4.1 N-m
50 5/16-24 M8x1.25 72-82 in-lbs 8.1-9.3 N-m
63 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
80 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
100 1/2-20 M12x1.75 40-44 ft-lbs 54-60 N-m
28 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Mounting Brackets
L077520075 20 30 22 29 6.35 19 3 7 8 10 32 51 9
L077520075 25 30 22 29 6.35 19 3 7 8 10 32 51 9
L077520125 32 30 22 29 6.35 19 3 7 8 13 35 54 9
L077520150 40 44 35 38 9.52 25 3 7 9 16 47 67 10
L077520200 50 44 35 38 9.52 25 6 7 9 19 54 76 11
L077520250 63 54 44 38 9.52 25 6 7 9 19 54 76 11
L077520312 80 70 51 64 19.07 38 6 11 19 28 72 104 16
L077520400 100 79 60 70 19.07 44 6 14 19 32 76 108 16
29 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Mounting Brackets Series P1L
Double Clevis Brackets
20-63 mm Bore Double Clevis Bracket: 80-100 mm Bore Double Clevis Bracket:
TB
TR TE
ØTS TD TD
TR
ØTS
TA
ØTM HOLES
TA
4 PLACES
TH
TH
TG
TG
TF TC TF
ØTM x 4 TC
TW
TW TB
CL
CD
Note :
Two snap rings shown are included with the pivot pin.
Order clevis bracket separately.
Cylinder
Bore Fastener Size Torque
20 8-32 M4x0.7 10-12 in-lbs 1.1-1.4 N-m
Double Clevis Kit Assembly Instructions:
Align the rear clevis with the port location as desired. Insert the four 25 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
(4) screws through the bracket and thread them into the end caps 32 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
until they are hand tight. Torque the screws to the values listed in the 40 1/4-28 M6x1 32-36 in-lbs 3.6-4.1 N-m
table beside. 50 5/16-24 M8x1.25 72-82 in-lbs 8.1-9.3 N-m
Double Clevis Kit, bracket and pivot pin are ordered separately.
Please see How To Order information in the back of the catalog for 63 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
part numbers. 80 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
100 1/2-20 M12x1.75 40-44 ft-lbs 54-60 N-m
30 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Mounting Brackets
31 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Mounting Kits Series P1L
Front or Rear Flange Mount Kit
ØFB HOLE
Front or Rear Flange Mount Bracket (4) PLACES
V
ØB
UF
TF
F
TF
Front or Rear Flange Mount Bracket Dimensions UF
Metric Dimensions (mm)
+ .0
Part Number Bore ØB - 0.02 F FB UF TF V
L077560020 20 12 6 5.5 40 28 2
L077560025 25 14 7 5.5 44 32 2
L077560032 32 18 7 7 53 38 2
L077560040 40 25 8 7 61 46 2
L077560050 50 30 9 9 76 58 2
L077560063 63 32 9 11 92 70 2
L077560080 80 40 11 11 104 82 3
L077560100 100 50 14 14 128 100 3
Cylinder
Bore Fastener Size Torque
20 8-32 M4x0.7 10-12 in-lbs 1.1-1.4 N-m
25 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
32 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
40 1/4-28 M6x1 32-36 in-lbs 3.6-4.1 N-m
50 5/16-24 M8x1.25 72-82 in-lbs 8.1-9.3 N-m
63 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
80 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
100 1/2-20 M12x1.75 40-44 ft-lbs 54-60 N-m
32 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Mounting Kits
ØCC HOLE
Foot Mount Bracket (4) PLACES P
S
ØB HOLE
R
ØSB SLOT
A
R SW SU
Foot Mount Bracket Dimensions TF
UF
Metric Dimensions (mm)
Part Number Bore A ØB +0.15
-0 ØCC P R S ØSB SU SW TF UF
L077550020 20 20.6 12.2 5.00 3 14 16 7 14 11 38 48
L077550025 25 20.6 14.2 5.80 3 16.5 18 7 14 11 38 48
L077550032 32 25.4 18.2 5.80 3 20 21 7 19 19 48 63.5
L077550040 40 25.4 25.2 7.50 3 26 26 7 18 20 48 63.5
L077550050 50 38.1 30.2 9.00 6 32 34 9 25 16 57 79
L077550063 63 44.5 32.2 11.50 6 38 39 9 25 16 73 95
L077550080 80 55 40.2 11.50 6 50 46 11 28.5 14 100 125
L077550100 100 65 50.2 14.50 6 60 56 14 30 16 120 150
+0.006
Part Number Bore A ØB -0 ØCC P R S ØSB SU SW TF UF
L077440075 20 0.81 0.480 0.20 0.12 0.55 0.63 0.27 0.56 0.44 1.50 1.88
L077440100 25 0.81 0.559 0.23 0.12 0.65 0.71 0.27 0.56 0.44 1.50 1.88
L077440125 32 1.00 0.717 0.23 0.12 0.79 0.83 0.28 0.75 0.75 1.88 2.50
L077440150 40 1.00 0.992 0.30 0.12 1.02 1.02 0.28 0.72 0.78 1.88 2.50
L077440200 50 1.50 1.189 0.35 0.25 1.26 1.34 0.34 1.00 0.62 2.24 3.12
L077440250 63 1.75 1.268 0.45 0.25 1.50 1.54 0.34 1.00 0.62 2.88 3.75
L077440312 80 2.17 1.583 0.45 0.25 1.97 1.81 0.43 1.12 0.55 3.94 4.92
L077440400 100 2.56 1.976 0.57 0.25 2.36 2.20 0.55 1.18 0.63 4.72 5.91
Cylinder
Bore Fastener Size Torque
20 8-32 M4x0.7 10-12 in-lbs 1.1-1.4 N-m
25 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
32 10-32 M5x0.8 12-14 in-lbs 1.4-1.6 N-m
40 1/4-28 M6x1 32-36 in-lbs 3.6-4.1 N-m
50 5/16-24 M8x1.25 72-82 in-lbs 8.1-9.3 N-m
63 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
80 3/8-24 M10x1.5 18-19 ft-lbs 24-26 N-m
100 1/2-20 M12x1.75 40-44 ft-lbs 54-60 N-m
33 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Mounting Kits Series P1L
Trunnion Mount Bracket
TB
TR TE
ØTS TD
TA
TH
TG
Trunnion Mount Bracket Dimensions TF ØTM x 4 TC
H9
Part Number Bore TA TB TC TD TE TF TG TH TM TR TS TW
L077510020 20 36 38 16 29 35 28 3 25 5.5 13 8 42
L077510025 25 43 42 20 33 39 28 3 30 5.5 15 10 42
L077510032 32 50 53.4 22 40 49 28 4.5 35 7 17 12 48
L077510040 40 58 64.4 30 49 58 30 4.5 40 7 21 14 56
L077510050 50 70 78.8 36 60 72 36 6 50 9 24 16 64
L077510063 63 82 96.6 46 74 90 46 8 60 11 26 18 74
34 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Rod End Accessories
J K L
A NUT
H DIA.
(PIN O.D.) Piston Rod Clevis Dimensions
Metric Dimensions (mm)
35 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Sensors Series P1L
SOLID STATE SENSORS SOLID STATE - WIRING CONNECTION
SPECIFICATIONS
2 Pin Wire Function
Type ............................................. Electronic
1 Brown 10-30 VDC
Output Function ........................... Normally Open
Switching Output .......................... PNP/NPN 1 3 2 Black Ouput signal
36 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Sensors
16.30
[.642]
8.40
[.331]
10.20
[.402]
Snap-On Threaded
Straight Plug Straight Plug
M8x1
Ø .318
8.1 Ø .378
9.6
37 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
How to Order Series P1L
How to Order Series P1L Cylinders
P1 L N 032 D M N 0200 W B N N N
Pneumatic Family Construction Bore Function Piston Style Seal Material Stroke Version Mounting Style Ports Rod End Style Rod Material
Actuators (mm)
Construction Basic
Inch Mounting Threads N
Metric Mounting Threads M
Rod Material
Bores (mm)
Carbon Steel
20, 25, 32, 40, 50, 63, 80, 100
(std. on bores 32-100mm) N
Stainless
(std. on bores 20-25mm) S
Function Basic
Double Acting, Single Rod D
Double Acting, Double Rod K
Rod End Style
Inch Male (std.) N
Metric Female 6
Magnetic Piston
Metric Male 5
Cushions No Magnet Magnet*
Inch Female 9
None N M
Special 3
Cushioned Both Ends F Y
*Not available with High Temperature seal option
Port Type
NPT Threads (std.) N
Seal Material BSPT Threads B
Standard Seals N
High Temperature T
Mounting Style
No Mountings Fitted (std.) N
Front Flange J
Rear Flange H
38 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L How to Order
Bore FOOT MTG FLANGE SINGLE CLEVIS DOUBLE CLEVIS SINGLE DOUBLE
Size (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) (Inch) (Metric) CLEVIS PIN CLEVIS PIN
20 L077440075 L077550020 L077450075 L077560020 L077470075 L077570020 L077480075 L077580020 L077490075 L077500020
25 L077440100 L077550025 L077450100 L077560025 L077470100 L077570025 L077480100 L077580025 L077490075 L077500025
32 L077440125 L077550032 L077450125 L077560032 L077470125 L077570032 L077480125 L077580032 L077490125 L077500032
40 L077440150 L077550040 L077450150 L077560040 L077470150 L077570040 L077480150 L077580040 L077490150 L077500040
50 L077440200 L077550050 L077450200 L077560050 L077470200 L077570050 L077480200 L077580050 L077490200 L077500050
63 L077440250 L077550063 L077450250 L077560063 L077470250 L077570063 L077480250 L077580063 L077490200 L077500063
80 L077440312 L077550080 L077450312 L077560080 L077470312 L077570080 L077480312 L077580080 L077490312 L077500080
100 L077440400 L077550100 L077450400 L077560100 L077470400 L077570100 L077480400 L077580100 L077490400 L077500100
Note:
• “Inch” mounting kits include inch threaded bolts, while “Metric” mounting kits include metric threaded bolts.
Please verify that the kit style matches the cylinder Construction type (code “N” or “M”) for which it is intended.
• Clevis pins may be used for either Inch or Metric mounting kits.
Cylinder Weights
25 0.35 0.08
32 0.55 0.11
40 0.9 0.17
50 1.58 0.25
63 2.19 0.28
80 4 0.41
100 6.75 0.59
39 Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Catalog SB0924 High Performance Repairable Pneumatic Cylinder
Offer of Sale Series P1L
The items described in this document and other documents or descriptions provided by the Company, its subsidiaries and its authorized distributors
are hereby offered for sale at prices to be established by the Company, its subsidiaries and its authorized distributors. This offer and its acceptance
by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such item, when communicated to the
Company, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals, confidential information or equipment furnished by Buyer or any other items
offers, acknowledgments, acceptances and sales of Seller’s products are which become Buyer’s property, may be considered obsolete and may be
subject to and shall be governed exclusively by the terms and conditions destroyed by Seller after two (2) consecutive years have elapsed without
stated herein. Buyer’s acceptance of any offer to sell is limited to these Buyer placing an order for the items which are manufactured using such
terms and conditions. Any terms or conditions in addition to, or inconsistent property, Seller shall not be responsible for any loss or damage to such
with those stated herein, proposed by Buyer in any acceptance of an offer property while it is in Seller’s possession or control.
by Seller, are hereby objected to. No such additional, different or inconsis- 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
tent terms and conditions shall become part of the contract between Buyer charges are exclusive of excise, sales, use, property, occupational or like
and Seller unless expressly accepted in writing by Seller. Seller’s accep- taxes which may be imposed by any taxing authority upon the manufacture,
tance of any offer to purchase by Buyer is expressly conditional upon sale or delivery of the items sold hereunder. If any such taxes must be paid
Buyer’s assent to all the terms and conditions stated herein, including any by Seller or if Seller is liable for the collection of such tax, the amount thereof
terms in addition to, or inconsistent with those contained in Buyer’s offer, shall be in addition to the amounts for the items sold. Buyer agrees to pay
Acceptance of Seller’s products shall in all events constitute such assent. all such taxes or to reimburse Seller therefore upon receipt of its invoice.
2. Payment: Payment shall be made by Buyer net 30 days from the date If Buyer claims exemption from any sales, use or other tax imposed by any
of delivery of the items purchased hereunder. Amounts not timely paid shall taxing authority, Buyer shall save Seller harmless from and against any
bear interest at the maximum rate permitted by law for each month or portion such tax, together with any interest or penalties thereon which may be
thereof that the Buyer is late in making payment. Any claims by Buyer for assessed if the items are held to be taxable.
omissions or shortages in a shipment shall be waived unless Seller receives 10. Indemnity For Infringement of Intellectual Property Rights: Seller
notice thereof within 30 days after Buyer’s receipt of the shipment. shall have no liability for infringement of any patents, trademarks, copy-
3. Delivery: Unless otherwise provided on the face hereof, delivery shall be rights, trade dress, trade secrets or similar rights except as provided in this
made F.O.B. Seller’s plant. Regardless of the method of delivery, however, Part 10. Seller will defend and indemnify Buyer against allegations of
risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Any infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress
delivery dates shown are approximate only and Seller shall have no liability and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will
for any delays in delivery. defend at its expense and will pay the cost of any settlement or damages
4. Warranty: Seller warrants that the items sold hereunder shall be free awarded in an action brought against Buyer based on an allegation that an
from defects in material or workmanship for a period of 18 months from date item sold pursuant to this contract infringes the Intellectual Property Rights
of shipment from Parker Hannifin Corporation. THIS WARRANTY COM- of a third party. Seller’s obligation to defend and indemnify Buyer is
PRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS contingent on Buyer notifying Seller within ten (10) days after Buyer
PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, becomes aware of such allegations of infringement, and Seller having sole
GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. control over the defense of any allegations or actions including all negotia-
ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MER- tions for settlement or compromise. If an item sold hereunder is subject to
CHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, a claim that it infringes the Intellectual Property Rights of a third party, Seller
IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR may, at its sole expense and option, procure for Buyer the right to continue
COURSE OF DEALING ARE HEREBY DISCLAIMED. using said item, replace or modify said item so as to make it noninfringing,
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN- or offer to accept return of said item and return the purchase price less a
TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR reasonable allowance for depreciation. Notwithstanding the foregoing,
PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS. Seller shall have no liability for claims of infringement based on information
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN provided by Buyer, or directed to items delivered hereunder for which the
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT designs are specified in whole or part by Buyer, or infringements resulting
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT from the modification, combination or use in a system of any item sold
OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID hereunder. The foregoing provisions of this Part 10 shall constitute Seller’s
BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL sole and exclusive liability and Buyer’s sole and exclusive remedy for
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR infringement of Intellectual Property Rights.
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC. If a claim is based on information provided by Buyer or if the design for an
LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN item delivered hereunder is specified in whole or in part by Buyer, Buyer
ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD shall defend and indemnify Seller for all costs, expenses or judgments
HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF resulting from any claim that such item infringes any patent, trademark,
CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN- copyright, trade dress, trade secret or any similar right.
CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN 11. Force Majeure: Seller does not assume the risk of and shall not be
OR STRICT LIABILITY. liable for delay or failure to perform any of Seller’s obligations by reason of
6. Changes, Reschedules and Cancellations: Buyer may request to circumstances beyond the reasonable control of Seller (hereinafter ‘Events
modify the designs or specifications for the items sold hereunder as well as of Force Majeure’). Events of Force Majeure shall include without limitation,
the quantities and delivery dates thereof, or may request to cancel all or part accidents, acts of God, strikes or labor disputes, acts, laws, rules or
of this order, however, no such requested modification or cancellation shall regulations of any government or government agency, fires, floods, delays
become part of the contract between Buyer and Seller unless accepted by or failures in delivery of carriers or suppliers, shortages of materials and any
Seller in a written amendment to this Agreement. Acceptance of any such other cause beyond Seller’s control.
requested modification or cancellation shall be at Seller’s discretion, and 12. Entire Agreement/Governing Law: The terms and conditions set
shall be upon such terms and conditions as Seller may require. forth herein, together with any amendments, modifications and any differ-
7. Special Tooling: A tooling charge may be imposed for any special ent terms or conditions expressly accepted by Seller in writing, shall
tooling, including without limitation, dies, fixtures, molds and patterns, constitute the entire Agreement concerning the items sold, and there are
acquired to manufacture items sold pursuant to this contract. Such special no oral or other representations or agreements which pertain thereto. This
tooling shall be and remain Seller’s property notwithstanding payment of Agreement shall be governed in all respects by the law of the State of Ohio.
any charges by Buyer. In no event will Buyer acquire any interest in No actions arising out of the sale of the items sold hereunder or this
apparatus belonging to Seller which is utilized in the notwithstanding any Agreement may be brought by either party more than two (2) years after the
charges paid by Buyer. Unless otherwise agreed, Seller shall have the right cause of action accrues.
to alter, discard or otherwise dispose of any special tooling or other property
in its sole discretion at any time. Printed in North America
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, May, 2001
Schrader Bellows
40 Des Plaines, IL USA
Owen Sound, Ontario Canada
High Performance Repairable Pneumatic Cylinder Catalog SB0924
Series P1L Notes
Schrader Bellows
Des Plaines, IL USA
Owen Sound, Ontario Canada
Schrader Bellows
Cylinder Division
Manufacturing Locations
1300 Six Flags Road
Lithia Springs, GA 30122
Tel.: (770) 819-3400
Fax: (800) 437-3498
715 South Iroquois Street
P.O. Box 475
Goodland, IN 47948
Tel. (219) 297-3182
Fax (800) 328-8120
900 Plymouth Road
Plymouth, MI 48170
Tel. (734) 455-1700
Fax (734) 455-1007
13908 N. Lombard
Portland, OR 97203
Tel. (503) 285-0884
Fax (800) 323-0195
80 Shaker Road
Enfield, CT 06082
Tel. (860) 749-2215
Fax (800) 323-0105
221 Helicopter Circle
Corona, CA 92880
Tel.: (909) 280-3800
Fax: (909) 280-3808
Fax: (800) 869-9886
325 Elizabeth Brady Drive
Hillsborough, NC 27278
Tel. (919) 732-9371
Fax (919) 732-9377
1000 Home Avenue
Akron, OH 44310
Tel. (330) 253-4375
Fax (330) 253-4883
1000 6th Street East
Owen Sound, Ontario
Canada N4K 5P1
Tel. (519) 376-2691
Fax (519) 376-8018
530 Kipling Avenue
Toronto, Ontario
Canada M8Z 5E6
Tel. (416) 255-4567
Fax (416) 251-6890
556 Lepine Street
Dorval, Quebec
Canada H9P 2V6
Tel.: (514) 631-3995
Fax: (514) 631-4191