Professional Documents
Culture Documents
Catalogo Wild Fire Esguichos
Catalogo Wild Fire Esguichos
MISSION STATEMENT
Our mission is to invent, make and deliver premium water handling equipment for wildland firefighters, agencies and
governments worldwide. Its distribution network paired with branches in strategic locations throughout Canada and the
United States, and with partners in international markets, provides the after-sales service which is of utmost importance in
the wildland fire control industry.
TABLE OF CONTENTS
Page
NOZZLES
FEATHER-LITETM NOZZLES & SMOOTH BORE TIPS 3
TM
FEATHER-LITE BALL SHUT-OFF VALVES 4
TWIN TIP FOG-STREAM NOZZLES 5
TM
GUARDIAN SPOT AND MOP NOZZLES 5
JET STREAM AND VARIABLE FLOW NOZZLES 6-7
FIRELINE HARDWARE
WYE BALL VALVES 8-9
WATER THIEVES 10
SPRINKLER KIT 10
ADAPTORS AND COUPLINGS 11
CHECK VALVES 11
www.wildfire-env.com • 1-800-426-5207 NOZZLES & FIRELINE HARDWARE 2
FEATHER-LITE™ NOZZLES
Provides a continuously adjustable water stream from shut-off to straight stream
to full fog pattern. All nozzles can be delivered with foam bumper or will accept
the Guardian™ foam adaptor and tubes (low or medium expansion). The Feather-
Lite™ base, threads and body are hard anodized for increased longevity.
GPM flow rates are stamped on each nozzle. Nozzles weigh 10 oz (284 g) or less.
Single
Bore sizes 1” NH (25 mm) 1” NPSH (25 mm) 3/4” GHT (19 mm) 1 1/2” NH (38 mm)
3/16” (4.8 mm) 4 0187 750
1/4” (6.4 mm) 4 0250101 4 0250102 4 0250 750
3/8” (9.5 mm) 4 0375 101 4 0375 102 4 0375 750 4 0375 151
07/2011
www.wildfire-env.com • 1-800-426-5207 NOZZLES & FIRELINE HARDWARE
NOZZLES 4
Ball shut-off valve with horseshoe Ball shut-off valve with horseshoe handle,
handle, full time sealed swivel, full time sealed swivel and pistol grip.
pistol grip and nozzle.
Bore sizes 1” NH (25 mm) 1” NPSH (25 mm) 3/4” GHT (19 mm)
3/16” (4.8 mm), NFES # 0024 1 2140 101 1 2140 102 1 2140 750
18° pattern at
1/4” (6.4 mm) 1 2150 101 1 2150 102 1 2150 750
3 US gals/min (11 L/min)
3/8” (9.5 mm) 1 2160 101 1 2160 102 1 2160 750
3/16” (4.8 mm) 1 2240 101 1 2240 102 1 2240 750
18° pattern at
1/4” (6.4 mm) 1 2250 101 1 2250 102 1 2250 750
6 US gals/min (23 L/min)
3/8” (9.5 mm) 1 2260 101 1 2260 102 1 2260 750
3/16” (4.8 mm) 1 2340 101 1 2340 102 1 2340 750
18° pattern at
1/4” (6.4 mm) 1 2350 101 1 2350 102 1 2350 750
15 US gals/min (57 L/min)
3/8” (9.5 mm) 1 2360 101 1 2360 102 1 2360 750
Twin Tip foam-stream nozzles Bore sizes 1” NH (25 mm) 1” NPSH (25 mm) 3/4” GHT (19 mm)
10 gpm Foam (38 L/min) 3/16” (4.8 mm) 1 2440 101 1 2440 102 1 2440 750
1/4” (6.4 mm) 1 2450 101 1 2450 102 1 2450 750
3/8” (9.5 mm) 1 2460 101 1 2460 102 1 2460 750
18 gpm Foam (68 L/min) 3/16” (4.8 mm) 1 2540 101 1 2540 102 1 2540 750
1/4” (6.4 mm) 1 2550 101 1 2550 102 1 2550 750
3/8” (9.5 mm) 1 2560 101 1 2560 102 1 2560 750
Spot and Mop nozzles 1 1/2” NH (38 mm) 1” NH (25 mm) 1” NPSH (25 mm) 3/4” GHT (19 mm)
10 US gals/min (38 L/min) 5 3310 101 5 3310 102 5 3310 750
18 US gals/min (68 L/min) 5 3318 101 5 3318 102 5 3318 750
40 US gals/min (151 L/min) 5 3340 151
07/2011
www.wildfire-env.com •• 1-800-426-5207
wildfire-environmental.com 1-800-426-5207 NOZZLES & FIRELINE HARDWARE
NOZZLES 6
NOZZLE COMBINATION
PAM-FBN SPRAY/STRAIGHT STREAM
Multi-Aperture nozzle Lightweight, corrosion resistant and durable nozzle. Polycarbonate
This durable nozzle is designed to (plastic), flame resistant and rib-reinforced for strength and gripping.
withstand the high pressure requested Supplied with 1 1/2” (38 mm) rubber gasket (12-43). 5 1/2” (14 cm) long.
by forestry applications. The diamond Nozzle Options
knurl grip provides easy adjustments. UNI-1030-1 1” (25 mm) female NPSH inlet, 8 oz (226 g)
Four spray sizes available: 1/8”, 3/16”, UNI-1030-1MI 1” (25 mm) with 1/4-turn FA-5 inlet, 12 oz (340 g)
¼”, 5/16” (3, 5, 6, 8 mm). The nozzle
UNI-1575 1 1/2” (38 mm) female NPSH inlet, 8 oz (226 g)
couples to all 1 ½” quarter-turn
adapters. UNI-1575MI 1 1/2” (38 mm) with 1/4-turn
quick-connect FA-3 inlet, 12 oz (340 g)
PAM-FBN
UNI-1575G 1 1/2” (38 mm) gasket only
UNI-1030-1G 1” (25 mm) gasket only
FA-407 SCO-4038-30 30 US gals/min (114 L/min),
Variable Flow Nozzle 1 1/2" or 1" NPSH or NH (38 or 25 mm)
Light, compact, corrosion resistant solid brass with stainless steel SCO-4038-70 70 US gals/min (265 L/min),
construction. Eliminates changing nozzle tips. Designed for 3/4” 1 1/2" or 1" NPSH or NH (38 or 25 mm)
(19 mm) garden hose thread GHT coupling, it can produce solid
stream, spray, mist or shut-off by simply turning the nozzle’s tips.
Built-in nozzle gasket for trouble-free use 3 oz (80 g). UNI-1030-1
Options
UNT-350186 Long adjustable nozzle, heavy duty
UNI-1575
construction, 3/4” (19 mm) female GHT
UNI-1030-1MI
SA-200 SA-15
Dividing Wye Ball Valve, 1 1/2” (38 mm) Dividing Wye, 1 1/2” (38 mm) NPSH
Unrestricted flow, pressure tested to 1100 PSI (7600 kPa), Designed to withstand 600 PSI (4136 kPa) with unrestricted flow.
operate freely at 600 PSI (4136 kPa). Balls adjust automatically Light, corrosion resistant anodized alloy, painted bright red.
to compensate for wear. Light, corrosion resistant anodized alloy, Supplied with rubber gasket 12-43. Hard anodized ball bearing
painted bright red. Supplied with gasket 12-43. Hard anodized rocker lug swivel 1 1/2” (38 mm) female NPSH inlet and 1 1/2”
ball bearing rocker lug swivel 1 1/2” (38 mm) female NPSH inlet (38 mm) male NPSH outlets. 1 lb (0.45 kg).
and 1 1/2” (38 mm) male NPSH outlets. 3 1/2 lbs (1,6 kg). Options
SA-50 Wye, for 2 into 1 operation, 1 1/2 (38 mm) NPSH
SA-210 SA-25
Siamese Ball Valve, 1/4-Turn Plain Siamese Combination, 1/4-Turn
Designed for 1 into 2 or 2 into 1 operation and to withstand 600 Designed for 1 into 2 or 2 into 1 operation and to withstand 600
PSI (4136 kPa). Unrestricted flow. Balls adjust automatically to PSI (4136 kPa). Unrestricted flow. Light, corrosion resistant
compensate for wear. Light, corrosion resistant anodized alloy, anodized alloy, painted bright red. 1 1/2” (38 mm) wye equipped
painted bright red. Three 1 1/2” (38 mm) NPSH openings with with three 1/4-turn connections. 1 1/2 lbs (680 g).
three 1/4-turn adaptors. 4 lbs (1.8 kg).
HAS-223-A-FSDM25N20S
Dividing Wye Valve for B-2
SA-250 This is a wye valve reducer for 2 1/2” (64 mm) NH inlets or
Dividing Wye Ball Valve outlets. It is often used with the Wildfire B-2 pump end in order
Designed to withstand 600 PSI (4136 kPa), with unrestricted to reduce the suction inlet from 2 1/2” (64 mm) NPSH to two
flow. Balls adjust automatically to compensate for wear. Light, 2” (51 mm) NPSH suction inlets. By adding this reducer, most
corrosion resistant anodized alloy, painted bright red. Supplied agencies will be able to utilize their existing 2” (51 mm) suction
with gasket. One hard anodized ball bearing rocker lug swivel lines instead of purchasing or having to carry additional 2 1/2”
hose fitting 2 1/2” (64 mm) female inlet (thread to meet your (64 mm) suction lines.
requirement) and two 1 1/2” (38 mm) male NPSH outlets. Please
specify 2 1/2” (64 mm) female inlet thread type. 4 lbs (1,8 kg).
B-5420 B-5258
“V” Shaped Hose Strangler Footvalve and Strainer
Specifically designed for thin walled synthetic hoses, it has two Spring-loaded check valve, capable of holding a water head equal
positions or settings for different hose wall thickness 1/4” or to 300 PSI. Designed with an ear hole for ease of tying to a
1/8” (6 or 3 mm). Replaceable rubber shoe prevents damage to floatation device in order to prevent suction of debris. Specifically
hose. Light, corrosion resistant alloy. 11 1/2” (29 cm) long. 1.5 made for use on the MARK-3®, BB-4®, STRIKER II-PLUS®, ULTRA-
lbs (682 g). Can be carried in belt pouch FA-149. The B-5420 STRIKER® and any other pumps using a 2” (51 mm) NPSH.
models have two “settings” that are designed to accommodate Options
hose strangling for hoses of different thickness (single-jacket, KOC-BS151 Kocheck, 1 1/2” (38 mm) NH, aluminum
double-jacket, etc...). One setting “squeezes tighter” than
KOC-BS1561 Kocheck, 1 1/2” (38 mm) NPSH, aluminum
the other.
Other threads also available.
Options
FA-149 Standard pouch for B-5420
GVP-STRANGLER-POUCH Red nylon model
B-5420P Hose Strangler Painted Red
KOC-BS151 B-5258
FA-149 A-6935
Ball Check Valve
Installed on the discharge side of the pump, the internal
rubber ball instantaneously prevents water return when the
pump stops. Very useful in uphill pumping to prevent possible
damage to the pump from return pressures. This light
B-5420
corrosion resistant alloy valve has a brass pressure relief pin and
two 1 1/2” (38 mm) 1/4-turn connections.
FA-3, FA-4
¼-Turn Couplings and Adaptors
CORDOVA by Wildfire offers an array of ¼-turn, also B-6397
known as quick-connect or instantaneous, couplings and Automatic Check Valve NH
adaptors. The advantage of ¼-turn is the speed in which
The automatic check valve prevents pressure return. 1 1/2”
hoses and connectors can be connected and disconnected.
(38 mm) female NPSH to 1 1/2” (38 mm) male NH with 1” (25
They also eliminate problems associated with incompati-
mm) female NPT bypass. Made with lightweight, anodized
ble threads, cross-threading, and damage to threads
aluminum material.
caused from wear in rugged wildland conditions.
Options
Options
B-6365 NPSH Version available
FA-7 1 1/2” (38 mm) 1/4-turn coupling set, includes
gaskets and expansion rings
FA-8 1” (25 mm) 1/4-turn coupling set, includes gaskets
and expansion rings SPY-6815-3/4-700
FA-12 Gaskets for 1 1/2” (38 mm) 1/4-turn couplings, Pressure Relief Valve
adaptors and fittings
Relief valves are used to automatically bypass discharge from
Other sizes and threads also available. pump when nozzle is shut off or pressure becomes excessive.
The adjustable type is set at 150 PSI (1050 kPa) but can be
adjusted to any pressure. Brass adjustable relief valve 0-700 PSI
(0-4900 kPa), 3/4” (19 mm) male NPT to 3/4” (19 mm) female
NPT. Also available in 1/2” (13 mm).
30 (114) Narrow fog 27 (102) 29 (110) 31 (117) 42 (159) 55 (208) 60 (227) 62 (235)
Single gallonage
1/4” (6.4 mm) N/A 13 (49) 16 (61) 19 (72) 21 (80) 23 (87) 25 (95) 26 (98)
3/8” (9.5 mm) N/A 30 (114) 36 (136) 42 (159) 47 (178) 51 (193) 55 (208) 59 (223)
1/2” (12.7 mm) N/A 53 (201) 64 (242) 74 (280) 83 (314) 91 (345) 98 (371) 105 (398)
5/8” (15.9 mm) N/A 82 (310) 101 (382) 116 (439) 130 (492) 142 (538) 154 (583) 164 (621)
3/8” (9.5 mm) N/A 30 (114) 36 (136) 42 (159) 47 (178) 51 (193) 55 (208) 59 (223)
Sutter Tip™
5/8” (15.9 mm) N/A 53 (201) 64 (242) 74 (280) 83 (314) 91 (345) 98 (371) 105 (398)
3/4” (19.1 mm) N/A 82 (310) 101 (382) 116 (439) 130 (492) 142 (538) 154 (583) 164 (621)
7/8” (22.2 mm) N/A 161 (609) 197 (746) 227 (859) 254 (962) 279 (1056) 301 (1139) 322 (1219)
1” (25.4 mm) N/A 210 (795) 257 (973) 297 (1124) 332 (1257) 364 (1378) 393 (1488) 420 (1590)
07/2011
TRAINING AND EMERGENCY SERVICES
Wildfire’s commitment to customer service and industry knowledge is unparalleled. Ever since our entry into the fire control industry in the 1920s, when the
company initially established itself as a manufacturer of the powerful 200 psi portable fire pump called the WAJAX, we have been involved in manufactur-
ing and distributing a full range of fire fighting equipment.
Wildfire’s expertise in complete systems from the water source to the fire is where our strength lies when serving the wildland and urban interface
firefighting community. Our distribution network paired with branches in strategic locations throughout Canada and the United States, and with partners
in international markets provide the after sales service which is of utmost importance in the fire service.
Wildfire has considerable experience in mounting training seminars worldwide for both end users of the equipment and local distributors. These seminars
include the application of the equipment for fire fighting situations, the recovery and maintenance of the equipment, as well as workshops on fire control
in general.
Wildfire prides itself on its sense of urgency during emergency situations and its ability to respond quickly when it matters most. In fact, it is the very foun-
dation upon which Wildfire’s reputation is built and is what makes it the preferred choice in a field where trust matters most.
It is for this reason that Wildfire continues to have a 24 hour emergency line (1-800-426-5207) available year round for providing and supplying fire equip-
ment or specific support services. Our team loyally works side by side with our customers and carries this responsibility with the utmost pride and dedication.
WARRANTIES
A. Warranty on Products Distributed by Wildfire
Wildfire makes no warranty, express or implied, with respect to any product distributed by it and manufactured by third-party manufacturers. You, the
purchaser, can only rely upon such warranties, if any, that are made by their respective manufacturers and subject the limitations that may be contained in
such warranties according to the respective terms thereof. Wildfire hereby assigns, as applicable, any such manufacturer warranty to you as the
purchaser, if assignable. However, Wildfire disclaims all other warranties or conditions for items whether express, oral, implied or otherwise, as to any
matter whatsoever, including but not limited to, implied warranties or conditions of merchantable quality or fitness for a particular purpose and those
arising by statute or otherwise in law or form a course of dealing usage of trade.
B. Warranty on Products Manufactured by or for Wildfire
Wildfire offers a limited warranty as described fully below. Among other things, it also specifically disclaims liability for:
• Failure of the product if it is used for other than its intended purpose.
• Changes or modifications not expressly approved by Wildfire.
• Unreasonable use, supplemental damage, or damage to the product not resulting from defects in material or workmanship.
• Any personal injury, damages of any kind resulting from misuse, improper installation, negligence, repair or alteration of the product.
No Consequential Damages
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
This statutory warranty gives you specific legal rights, and you may have other rights, which vary from state to state or province to province. Wildfire offers
a limited guarantee of all products manufactured by Wildfire to be free of defects in material and/or workmanship for a period of one (1) year from date of
invoice subject to use of such products strictly according to instructions. Any product manufactured by or for us believed by you to contain a defect must be
returned to Wildfire for examination and evaluation. You are responsible for payment of transportation charges. If after inspection by us or an expert
appointed by us the product is in fact found to be defective, Wildfire will repair or replace the defective product and reimburse the original buyer for
transportation charges to and from our warehouse.
Limitation of Liability
THE WARRANTY SPECIFIED HEREIN IS LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED, OR IMPLIED.
Wildfire hereby expressly disclaims any express or implied warranties of merchantability or of fitness for any particular purpose.
Wildfire’s liability on any claim of any kind, including negligence, for any damage or loss including but not limited to personal injury or consequential
damage arising out of, connected with or resulting from this contract, or from the manufacture, lease, sales, delivery, resale, return, repair, maintenance,
handling or use of any product covered by or furnished under this sale, shall in no case exceed the purchase price. Wildfire shall not be liable for any penalty
or for any special, indirect or consequential damages, including, but not limited to, any economic loss, loss of revenue or loss of opportunity.
The foregoing warranty is in lieu of all other warranties, express or implied, including but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. Your exclusive remedy with respect to any and all losses or damages resulting from any cause whatsoever, including our
negligence, shall be repair or replacement as specified above. We shall in no event be liable for any consequential or incidental damages of any nature,
including without limitation, damages for personal injury or damages to property, and however occasioned, whether alleged as resulting from breach of
warranty or contract by us or our negligence or otherwise.
www.wildfire-env.com • 1-800-426-5207
07/2011
Tech-notes, part lists and other documents
can be found on our web site at
www.wildfire-env.com
Distributed by: