Professional Documents
Culture Documents
1615468301bosch Rexroth Sydz0001 Valvola Valve Re29255
1615468301bosch Rexroth Sydz0001 Valvola Valve Re29255
12
Replaces: 06.10
1/4
control system
H6673 H6670
Series 1X
Maximum operating pressure 350 bar
Functional description
The pre-load function is only effective within the pressure Note:
range of up to 20 bar. If the operating pressure in port P1 ex- The pressure relief function is purely a safety function and is
ceeds 30 bar, the pre-load valve (1) is fully open. In order to not suitable for continuous use!
limit the maximum pressure, a factory-preset pressure relief The system must be bled during commissioning.
valve (2) is integrated into the pre-load valve (see ordering
details). In addition, an integrated check valve (3) allows the
pressure to be controlled in the range < 20 bar.
Symbol
1 3 2
P1
MP1
A T
20 bar A
1 Pre-load valve
2 Pressure relief valve
P T 3 Check valve
T
P 4 Bleed screw
4 PP
SYDZ 0001 1X M *
Pump pre-load valve for the SYDFE Further details in clear text
closed loop control system M= Seals suitable for mineral oil
Series 10 to 19 = 1X (HL, HLP) to DIN 51524
(10 to 19: unchanged installation and Pump type and nominal size
connection dimensions)
V028 = A10VSO NS18/28
Pressure limitation 200 bar = 200 V045 = A10VSO NS45
Pressure limitation 250 bar = 250 V071 = A10VSO NS71
Pressure limitation 300 bar = 300
V140 = A10VSO NS100/140
RE 29255/01.12 SYDZ 0001 Hydraulics Bosch Rexroth AG 3/4
K
NS 18/28 45
27
A Ø75 Ø80
B 115 115
C 104 104
T2) D 60,5 60,5
E 30 29
B
C
P1 MP1 F 14 15
G 30 33
D
K Ø34 Ø34
G
E
P
F
L 22,2 26,2
PP M 47,6 52,4
O 4 x Ø10,5 4 x Ø10,5
O
P G1/8 G1/8
30°
P1 (NS100/140)
K SAE connection
41 NS 71 100/140
A 85 85
B 150 147
C 134 131
T3)
D 94 91
E 55 52
B
P1 F 24 24
C
MP1 G 56 56,5
D
H 44 48
G
E
K Ø45 Ø45
P
F
L 30,2 31,8
PP N
M 58,7 66,7
N 4,5 4,5
O
O 4 x Ø10,5 4 x Ø15
H
P1 G1 SAE 1 1/4“ 2)
P G1/8 G1/8
L MP1 G1/4 G1/4
A 3)
T G3/4 G3/4
Bosch Rexroth AG © This document, as well as the data, specifications and other informa-
Hydraulics tion set forth in it, are the exclusive property of Bosch Rexroth AG. It
Zum Eisengießer 1 may not be reproduced or given to third parties without its consent.
97816 Lohr am Main, Germany The data specified above only serve to describe the product. No state-
Phone +49 (0) 93 52 / 18-0 ments concerning a certain condition or suitability for a certain applica-
Fax +49 (0) 93 52 / 18-23 58 tion can be derived from our information. The information given does not
documentation@boschrexroth.de release the user from the obligation of own judgment and verification. It
www.boschrexroth.de must be remembered that our products are subject to a natural process
of wear and aging.