Professional Documents
Culture Documents
CMC Type A Product Release Checklist Issa
CMC Type A Product Release Checklist Issa
CUSTOMER Fibre box (front) RRH DCD (rear) Bias-T GPS unit
EXPECTED VOLUME
Filter
REQUESTED DELIVERY
RRH modules
Power Module
Note:
Typical configuration
shown. Number of
RRH modules and
other details may
vary.
Refer to separate checklists for Power Module, Battery Module and Miscellaneous Support Module.
14 Env Internal equipment is protected to IP23. Power Module and Misc. Support Cabinet
are IP55.
Product Release Issue A
Checklist CMC Type A 2 April 2013
Base cabinet excluding Misc. support cabinet, Power and Battery Modules p4
17 Mec Dimensions:
1790 mm high excluding base frame
600 mm deep
2310 mm wide
18 Mec The cabinet has colour options to suit RMA conditions, normally Ghost Grey or Green
Fields.
19 Mec Cabinets are supplied with anti-graffiti paint as standard. Graffiti can be easily washed off.
20 Mec There are no externally operated screws or bolts. Exception: The access cover for the
generator plug and cord.
21 Mec The cabinet is constructed of materials that are resistant to corrosion for the design life of Marine grade aluminium (internal and
the product. external), zinc-plated steel (internal),
Galvanised steel base frame.
22 Mec The cabinet has a design life of 15 years.
24 Mec-door A door alarm is provided and activates if any side panel is removed. Excludes narrow side panels as below.
25 Mec-door The side panels are fitted with swing handle three-point locks. Panels lift off after operating the lock
handle.
26 Mec-door The narrow side panels have four point locks, operated by two levers from inside.
Product Release Issue A
Checklist CMC Type A 2 April 2013
Base cabinet excluding Misc. support cabinet, Power and Battery Modules p5
29 Eqpt The CMC includes as standard: The Power Module, Battery Module and
1 x Power Module Misc Support Cabinet are specified
1 Battery Module separately.
1 x Misc Support Cabinet
30 Eqpt Up to 9 sets of the following may be fitted:
RRH
Filter
Bias T
31 Eqpt A second battery module may be fitted as an option, at the expense of four RRHs.
32 Eqpt The cabinet has an option to include mounting and a window for a GPS unit in the roof.
33 Eqpt There is provision for an AC power meter to be fitted. A clear plastic viewing window and internal
compartment are included. There is no
meter wiring as standard.
34 Mec-install The cabinet may be safely lifted by crane during installation using two removable lifting The bars are available to separate order.
bars.
35 Mec-install The cabinet should be lifted with no RRHs or batteries fitted. There may be up to 30kg of equipment in
the Misc. Support Cabinet.
36 Base A locking point is provided to allow a portable external generator (or other equipment) to “D” ring on the front of the base frame.
be secured to the cabinet base frame (when provided).
37 Base The base frame designs include provision for an earth cable to run from an external earth
stake into the cabinet through the bottom.
38 Base The base frame is constructed of materials that are resistant to damage and corrosion Hot dipped galvanized steel
39 Transport The cabinet is suitable for long term storage in a “weather protected non-temperature
controlled location. (ETSI 300 019-1-1).
40 Transport The cabinet is shipped with Power Modules, Battery Modules and Misc Support Cabinet
fully installed and wired.
Product Release Issue A
Checklist CMC Type A 2 April 2013
Base cabinet excluding Misc. support cabinet, Power and Battery Modules p6