Professional Documents
Culture Documents
What Is A Submersible Pump
What Is A Submersible Pump
A submersible pump (or electric submersible pump (ESP)) is a device which has
a hermetically sealed motor close-coupled to the pump body. The whole
assembly is submerged in the fluid to be pumped.
Under voltage occurs when the average voltage of a three-phase power system
drops below intended levels, and is sometimes referred to as a brown-out.
Electromechanical devices, including three phase motors and pumps, are
designed to be operated at very specific voltage levels. If these devices are
allowed to operate at reduced voltage levels they will draw higher currents.
The increase in current causes increased heat in the winding and coils of the
equipment damaging the critical insulation protecting them. Operating in
Under voltage conditions can drastically reduce the life of the
electromechanical equipment and lead to premature failure.
THE INVENTION
The alarm device comprises a main controller, a flow sensor, a liquid level
sensor, a pressure sensor, a temperature sensor, an alarm and a power switch.
The flow sensor, the liquid level sensor, the temperature sensor, the alarm and
the power switch are connected with the main controller respectively. The
alarm device has the advantages of being simple in structure, convenient to
use, low in false alarm rate and capable of interrupting the power supply of the
submersible pump timely and protecting equipment and human safety.
Phase Three
HP 3
Voltage 230V AC
Usable @ 208V No
Usable @ 200V No
Hz 60
Motor Service Factor 1.15 (motor can be loaded to 115% of its rated load)
Number of Wires 3
Lead Length 100 inches