Professional Documents
Culture Documents
Federal Polytechnic Nasarawa
Federal Polytechnic Nasarawa
Section A
1. The results of a standard Proctor test are given in the table below. Using excel spreadsheet
calculate the dry densities and plot the compaction curve. Volume of mould is 0.0096 𝑚3 .
Mass of wet soil in the mould (kg) 1.48 1.88 2.12 1.82 1.65
Moisture content (%) 8.4 10.2 12.3 14.6 16.8
Section B
1. Design the floor slab of a bar spanning 5.4 by 6m. Consider the slab as simply supported
with a thickness of 0.2m.
2. Design a staircase for an office building using the following. The effective span (b) is 3.6
m and the rise of the stairs is 1.8 m, with 260 mm treads and 150 mm risers. The total
length, L (5.4m), the landings are 750mm in length and the flight waist is 150mm. Tensile
strength of reinforcement as 250 𝑁/𝑚𝑚2 .
3. Design the T-beam section shown below for a continuous beam of 6 spans with maximum
span of 6m. The compressive strength of concrete and tensile strength of reinforcement is
30 and 460 𝑁/𝑚𝑚2 respectively.