ANNEXURE -
ROAD FURNITURE RATES
MEETING OF THE BOARD OF ENGINEERS HELD ON 24-.04.202{
Rate in Rs.
Basic rates for the
Si. year 2019-20
No. Description of Item Unit | 4) roved by BOE
(excluding GST)
Basic rates Approved
for the year 2021-22:
(excluding GST]
1 |Retro-Reflectorised Traffic Signs (with out definition board) Type - IV
IProviding and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs
(without definition board) made out of High Intensity Prismatic Grade Sheeting confirming]
Ito Type-IV standards of IRC-67: 2012 and ASTM D 4956 -09, specification and fixed over|
l2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild|
[Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not|
less than 2.10m from the ground level to the bottom of the sign board and 0.60m below
lground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the
lground by means of properly designed foundation with MIS grade cement concrete|
l45emx4ScmX60cm size including cost and conveyance of all materials, equipment,
Machinery and labour with all leads and lifts, loading charges necessary for satisfactory|
lcompletion of the work as directed by the engineer in charge. High intensity Retro - Reflectro|
sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67- |
12012. The retro - reflective sheeting shall be covered under 7 year warranty issued for field|
lperformance and a certified copy of three years outdoor exposure report shall be obtained as|
lper IRC 67:2012 . (as per MORT&H Specification No.801}
i_|90 cm equilateral triangle Each 4048 5126
ii_|60 cm equilateral triangle Each 2632 3228
iti_[60 em circular Each 3596 4513
iv [80 cm x 60 cm rectangular Each 4954 6349
v_|60 cm x 45 cm rectangular Each 3440 4316
vi_|60 cm x 60 cm square Each 4086 5184
vii [90 cm high octagon Bach 6335 8205
: wa . |
ian ws 914 | Jews Oh 4 wore
CE{H)CAM —CE(H)PROJECT —C.E(H)PDRL CAE y CEH) AH
\e
Onkp yc (!
Bae cfg BB
DIRECTOR HRS: -E.(H) CKICP C.E.(H) TNRSP-| DG HIGHWAYS:
C.E.(H) METRO (Adal)Ist.
INo.
Basic rates for the
year 2019-20
Approved by BOE
(excluding GST)
Basic rates Approved|
for the year 2021-22
(excluding GST)
Description of Item Unit
Retro-Reflectorised Traffic Signs (with definition board) Type - IV
Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and Informatory signs
(with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to|
lType-IV standards of IRC-67: 2012 and ASTM D 4956 -09, specification and fixed over 2mm|
{thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel|
langle and supported on a mild steel angle post 75X75X6mm with a clear height of not less|
than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground!
level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by|
Imeans of properly designed foundation with MIS grade cement concrete 4SemX45emX60cm|
size including cost and conveyance of all materials, equipment, Machinery and labour with|
fall leads and lifts, loading charges necessary for satisfactory completion of the work as|
ldirected by the engineer in charge. High intensity Retro - Reflectro sheet shall consist of|
minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2012. The retro - reflective
Isheeting shall be covered under 7 year warranty issued for field performance and a certified
copy of three years outdoor exposure report shall be obtained as per IRC 67:2012 . ( as per|
IMORT&H Specification No.801)
i_|90 cm equilateral triangle Each 5373 6900
ii_[60 cr equilateral triangle Each 3954 4999
iii [60 cm circular Each 4917 6283
iv_|80 cm x 60 cm rectangular Each 6276 8120
v_|60 cm x 45 cm rectangular Each 4762 6087
vi_[60 em x 60 cm square Each 5411 6958
vii [90 cm high octagon Each 7658 9976
\one git Nya goose
C.E.(H) METRO (Adal)
ety CaM C.
PROJECT yPDEL El (H) NH
Ne
ho Vr “ ,
Bh ent ast gta
DG
DIRECTOR HRS C.E.(H) CKICP C.E.(H) TNRSP-II. |HWAYS.
feBasic rates for the
si. year 2019-20
No Description of Item Unit | approved by BOE
(excluding GST)
Basic rates Approved|
for the year 2021-22
{excluding GST)
3 |Direction and Place Identification Signs - Type - IV
Providing and erecting of Direction and Place Identification Retro-reflectorised Sign made out
jof High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2019|
jand ASTM D 4956 -09, specification and fixed over 2mm thickAluminium sheet fixed over a|
loack supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel
jangle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to|
the bottom of the sign board and 0.60m below ground level. The sign post should be painted|
jas per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation|
jwith M15 grade cement concrete 4SemX45cmX60cm size including cost and conveyance of{
jall materials, equipment, Machinery and labour with all leads and lifts, loading charges|
Inecessary for satisfactory completion of the work as directed by the engineer in charge. High]
jintensity Retro Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per|
[fable 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year|
|warranty issued for field performance and a certified copy of three years outdoor exposure|
lreport shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)
late per sqm (for sign having area
upto 0.9 sqm) Type-IV
[Rate per sqm ( for sign having area
* |more than 0.9 sqm] Type-IV Sam 2057 21805
Sqm 8777 11491
oN
C.E.(H)C&M = C.E.(H) PROJECT P.D.&I. — C.E.(H) BRR C.E.(H) NH
h¢
Orele r a
sid pte i, Lo Bega
DIRECTOR HRS E.(H) CKICP C.E.(H) TNRSP-II.
C.E.(H) METRO (Addl)
il @Sl.
Basic rates for the
ear 2019-20 . [Basic rates Approved|
Ino Description of Item Unit | ,rroved by BOE 7 the year 202 Se
(excluding GST) es
4 [Piteetion and Place Identification Signs - Type - XI (For location of black spot,
lcurve, sharp bend, junction, ghat roads and critical zone applications)
lproviding and erecting of Direction and Place Identification Retro-reflectorised Signs made out of
|Cube Corner Micro Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67: 2012 and|
STM D 4956 -09, specification and fixed over 2mm thick Aluminium sheet fixed over a back{
Jsupporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post|
|75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the|
lsign board and 0,60m below ground level. The sign post should be painted as per IRC 67-2012 andl
Jirmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete|
J4ScmX4SemX60cm size including cost and conveyance of all materials, equipment, Machinery and|
liabour with all leads and lifts, loading charges necessary for satisfactory completion of the work as|
ldirected by the engineer in charge. Micro Prismatic grade Retro - Reflectro sheet shall consist off
minimum coefficient of Retro-reflection as per Table 6.9 of IRC 67-2012, The retro -reflective sheeting|
Jshall be covered under 10 year warranty issued for field performance and a certified copy of three|
-ars outdoor exposure report shall be obtained as per IRC 67:2012. ( as per MORT&H Specification|
INo.801) (For location of black spot, curve, sharp bend, junction, ghat roads and critical zone|
lapplications)
lRate per sqm (for sign having area
14041
* lupto 0.9 sqm) Type XI Sam 10766 °
IRate per sqm ( for sign havingarea |<
™ |more than 0.9 sqm] Type - XI Sam ahd 14855
Va tenet)
ce. Nek C.E(H) PROJECT — CIE. PDL
C.E(H) ae CENA
4lie
Ovate Vie ‘ \
A Ofer 6 pene” aaa
DIRECTOR HRS C.E(H)CKICP —_C.E.(H) TNRSP-ll. Hi
C.E.(H) METRO (Addl)Basic rates for the
a |, Year 2019-20
Description of Item Unit | 42 oved by BOE
(excluding GST)
Basic rates Approved
for the year 2021-22
(excluding GST)
isi.
INo.
5 |Metal Beam Crash Barrier Type - A, "W" Double Guard
Providing and erecting Single sided Double Guard Metal Beam Crash Barrier System 1.70m|
[high, comprising of 3mm thick wall "W" beams posts and spacer channels shall be made by|
|cold roll forming using HR conform to IS 5986 Fe 410/360 and dip galvanized having Zinc|
Mass of 5S0gms/ sqm, minimum 950mm above road/ ground level fixed on ISMC series
|channel vertical post 150x75xSmm spaced 2m center to center 312mm x 83mm flange width|
jx 3mm thick, 4318mm long post directly embedded in the concrete (M15) pit size]
I350x350x800mm for a depth of 750mm below ground. All fixing bolts and nuts hot dip
lealvanized conforming to IS:1367 clause 4.60 all complete as per Technical Specification and
las directed by the Engineer-in-charge
Metal Beam Crash Barrier Type - A, "W" =; 2
Double Guard RM 5864 6500
nan Sanaa * BS cana
C.E(H)C&M — C.E(H) PROJECT (WPD&L CE(AVNERR. “CE(INH
x eo
Slie
- wav je 3 aa 4
Vv fern
DIREC on HRS C.E.(H) cKich Cl EA (H) TNRSP-Il. DG HIG} et
C.E.(H) METRO (Addl) Shige
5sl.
Basic rates for the
year 2019-20
Basic rates Approved
No. Description of Item Unit | approved by BOE |** the Year 2021-22
(excluding cs) | *Iuding GST)
6 [Road Marking with Hot Applied Thermoplastic Compound with Reflectorising
Glass Beads on Bituminous Surface
INo.803
[Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including|
Ireflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive|
lof surface applied glass beads as per IRC:35. The finished surface to be level,
luniform and free from streaks and holes etc complete as per MORT&H specification|
Road Marking with Hot Applied
|Thermoplastic Compound with
[Reflectorising Glass Beads on
Bituminous Surface
Sqm
841
890
\
Orolo ur
OP o
oa ORO
C.E(H) CKICP
Saar
C.E.(H) METRO (Addl)
C.E.(H) PROJECT
CE.
\
ER. Ceti A
She
SoahSesors
SieBasic rates for the
SI js year 2019-20
No. Description of Item Unit | approved by BOE
(excluding GST)
Basic rates Approved|
for the year 2021-22
(excluding GST)
7 |Road Markers/Road Stud with Lens Reflector
Providing and fixing reflective road studs of ‘category A’ Raised pavement markers made out
lof poly carbonate / methyl methererylate/ABS moulded body confirming to ASTM D 788 and|
reflective panels with micro prismatic lens capable of providing total internal reflection of the|
light entering the lens face with retro reflectance and chromaticity values conforming to|
[ASTM D4280, The reflective raised pavement markers shall also confirm to the MORTH|
Jcircular No RW / NH. 33023/10/ 97-DO.lII dt 11.06.97. The height, width and length shall
Inot be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm
lon each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have|
la CIL not less than values specified in Table 2 of said MORTH circular. The strength off
ldetachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2mm and|
height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kef. Fixing
lwill be by drilling holes on the road for the shanks to go inside, without nails and using|
lepoxy resin based adhesive as per manufacturer's recommendation and complete as directed|
lby the engineer. The marker shall support a load of 13635 Kg tested in accordance with|
|ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MORT&H specification 804]
letc., complete
Road Markers/Road Stud with Lens
Reflector Each 414 480
CAR Matar.
C.E.(H)C&M —C.E.(H) PROJECT
Orie ‘
wish fst =the, oa a at
DIRECTOR HRS E(H) okt P eur NRSP-Il.
:.(H) METRO (Addl) 1]Basic rates for the
si. ae year 2019-20
Description of Item Unit | gproved by BOE
(excluding GST)
Basic rates Approved
for the year 2021-22
(excluding GST)
8 {Road Delineators
‘Supplying and installation of delineators (road way indicators, hazard markers and object|
markers), 80-100 cm high above ground level, painted at alternatively black and white in 15|
lcm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised|
[panels at the top, buried or pressed into the ground and conforming to IRC-79 etc., complete
(as per MORT&H specification No. 806)
|Road Delineators Each 2215 2400
aaa SRL, wh erg
C.E.(H)C&M = C.E(H) PROJECT = C-E.(H) PBaL (NH
he
Ome :
oes oO Lom ial
DIRECTOR HRS E.(H) Cl ce E.(H) onl ll. HIGH! ae
C.E.(H) METRO (Addl)Basic rates for the
year 2019-20
Approved by BOE
(excluding GST)
sl.
No.
Description of Item Unit
Basic rates Approved|
for the year 2021-22
(excluding GST)
9 |Hazard Marker Traffic Signs - Type-IV
Providing and Erecting of Retro - Reflectorised Hazard Marker Traffic Sign made out of High
Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and
|ASTM D 4956 -09, specification and fixed over 2mm thick Aluminium sheet fixed over a|
[back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel
langle post 75X75X6mm and 0.60m below ground level. The sign post should be painted as|
per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation
lwith M15 grade cement concrete 45emX45cmX60cm size including cost and conveyance of|
Jall materials, equipment, Machinery and labour with all leads and lifts, loading charges|
Inecessary for satisfactory completion of the work as directed by the engineer in charge. High
intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as|
lper Table 6.6 of IRC 67-2012. The retro- reflective sheeting shall be covered under 7 year|
lwarranty issued for field performance and a certified copy of three years outdoor exposure|
report shall be obtained as per IRC 67:2012. (as per MORT&H Specification No.801)
30cm x 90cm rectangular Each 3342 4000
“. a
bras wom) eet
C.E.(H)C&M —C.E(H) PROJECT RCE (H)NH
Ne
rae
tintoon bob
DIRECTOR HRS.
C.E.(H) METRO (Addl)
\ cr
ofeebiaeheBasic rates for the
year 2019-20
Approved by BOE
(excluding GST)
Basic rates Approved|
for the year 2021-22
(excluding GST)
sl.
No. Description of Item Unit
10 |Rigid Median Marker
Providing fixing of Median marker double sided made of polycarbonate for impact resistance|
land good weather ability. Polycarbonate used for molding the median marker shall have a|
minimum Izod impact strength value of 600 J/m at room temperature. The impact strength|
lof the poly carbonate should not decrease to less than 70% of its initial value on being|
subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of|
natural weathering. The body of the median marker shall be in the form of an isosceles|
trapezoidal structure of length 15 cm height and width of 10 x 10 cm. The median marker|
shall have fluorescent yellow retro - reflective sheeting confirming to Tpe XI specifications as|
per ASTM D 4956.Area of reflective sheeting should not be less than 70 cm2 .Bdge of retro
reflective shall be concealed using a grill/mesh/similar mechanism to prevent vandalism and
sheeting pilferage. The logo of the manufacturer shall be embossed and painted in|
|contrasting colour on both side of median marker for distinct identification.
Rigid Median Marker Each 445 470
‘ By te
Luge
ae aietin R aa ua |
. ote RR. CE.(H) NH
hie
C.E.(H)C&M —C.E,(H) PROJECT
Om a ‘
Liking MGR eh
Dt sH\
lve
DIRECTOR HRS C.E.(H) CKICP C.E.(H) TNRSP=l, IAYS
C.E.(H) METRO (Addl) \‘Basic rates for the
st a |. year 2019-20
No. Description of Item Unit | acproved by BOE
(excluding GST)
Basic rates Approved
for the year 2021-22
(excluding GST)
11 |Flexible Delineator / Spring Post
providing and Fixing of Flexible Median Marker that are made of tough, high impact resistant,
linjection-molded, thermoplastic body with property of flexibility to provide high durability. The|
ldimension of Flexible Median Marker should not exceed 18.4 cm in height{including shank
height), 12.5 Cm in width ,0.65 cm in thickness and shank depth shall be 3.4 cm The body structure
Jshall be rounded at all its corners and edges. The plastic used for molding the Flexible Median
hstarkcer should survive impact load of 5kg continuously for 750 times at room temperature.The logo o!
lthe manufacturer shall be embossed on either side of the body in the injection molding process. The|
IMedian Marker shall have flame like shaped body with, fluorescent yellow color retro-reflective|
Jsheeting of size not less than 90 Cm square, with fully reflective micro prismatic cube comers as its
lretro-refiective elements as per IRC 67 2012 and ASTM D4956-09 type XI specifications reflectivity|
values. ‘The retro-reflective sheeting shall be one or both sides of the Flexible Median Marker and|
lshall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting|
ldamage, etc. The Flexible Median Marker shall be fixed by a combination of epoxy adhesive and|
lgrouting as recommended by manufacturer
Flexible Delineator / Spring Post Each 1800 1980
AN ey ;
PD&l CEAH)NERR CE(H)NH
Koma ner
C.E.(H)C&M —C.E.(H) PROJECT
Whe
On) ,
Os epost, oa Bdsderaei?!
DIRECTOR HRS C.E.(H) ckice C.E.(H) TNRSP-II. DG HIGHWAYS:
C.E.(H) METRO (Addl)
WigBasic rates for the
‘year 2019-20 [Basic rates Approved
Description of Item Unit | 4) ved by BOE te ‘the year 202 122
(excluding GST) e
si.
No.
12 |Star Sign Sticker
[Providing and fixing of Retro - Reflectorised cautionary Star Sign made out of High Intensity Prismatic|
|Grade reflective Sheeting sticked over CR sheet 0.20 mm / 32 G thickness with black enamel paint|
lhirmly fixed on the trees with 1 1/2" x 14 G wire nails of size 100 mm x 100 mm.
Star Sign Sticker Each 80 90
Ae wager) aes
agate saad ( ba rae CEH NA
C&M C.E(H)PROJECT C.E(H)P.D&l CE.
Phe
Ome Yk
a Spree Tat iam
IRECTOR HRS C.E.(H) CKICP C.E.(H) TNRSP-II. De
C.E.(H) METRO (Addi) Are
bS
S|Basic rates for the |p, sic rates Approved!
si. , year 2019-20
No. Description of Item Unit. | ayproved by Bow |e sear 2021-22
(excluding Gst) | (¢*eluding GST)
13 |Solar Raised Pavement Marker / Solar Road Stud
|supplying of Solar Raised Pavement Markers made of polycarbonate molded body, solar powered, LED self
jitumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of
Iproviding total internal reflection of the light entering the lens face in passive mode. The product shall support al
load of 13635 kg tested in accordance to MORTH and ASTM D 4280 Type H. The product should be resistant to|
lwater ingress according to IP 65 standards with IS 12063:1987 Category 2 and should withstand temperatures in|
the range of -7 C to 70 C. Plashing rate and color of lighting is to be provided as per requirement. There should|
Joe minimum current losses of less than 20 micro-amperes in sleep-charging mode to enhance product life and|
|single charge should provide for a minimum autonomy of 50 hours. The height, width and length shall not be less|
than 10 mm x 100 mm x 100 mm. Pixing will be by drilling holes on the road for the shanks to go inside, without|
Jnails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by|
lthe engineer, Warranty Certificate and test reports confirming to compressive strength as per MORTH circular]
[shall be obtained from the manufacturer and submitted to the engineer-in-charge. Two Years Warranty Certificae|
jor Solar RPM for the quantity installed and a certified copy of test reports from an independent test laboratory|
Jconforming to water ingress shall be obtained from the Manufacturer by the contractor and submitted to the|
lengineer-in-charge.
Solar Raised Pavement Marker / Each 3050 3300
iSolar Road Stud
C.E.(H) METRO (Addl) 13] i
C.E.(H)C&M —C.E.(H) PROJECT
Aa waren]
Ag yoni
CEA) \ Gena
\3fi\¢
ae. fest. wine aa
DIRECTOR HRS E.(H) Cl ice cee E.(H) +FNRSP- AL. De jHWAYSIs.
No.
Basic rates for the
year 2019-20
Approved by BOE
(excluding GST)
IBasic rates Approved
for the year 2021-22
(excluding GST)
Description of Item Unit
14
|Aluminium backed Flexible Prismatic (AFF) Sheeting
[supply and fixing of AFP Sheeting flexible prismatic sheeting shall be of 1f{ width and laminated at the back with
J2 50 micron thick Aluminium (Al) foil with pressure sensitive adhesive and liner ,further this flexible prismatic|
|sheoting shall have screen printed arrow /slant line pattern in black colour on top in continuous roll format.
|Neither AFP sheeting nor the flexible prismatic sheeting used shall crack when slowly bent in second time around
ja 1/8th inch mandrel after being conditioned for 24 hrs at O degrees and tested as per section 62.2.2 of ASTM, D
|4956-09. The AFP sheeting with the linear removed shall be applied with a neoprene contact adhesive with
Jpotychloroprene as base viscosity of 200-450 cps and solid content of 20:30 % once applied the edges of the
Jproduct shall be extremely resistant to peel off. A test report from institutes like ARAI/CRR/ conforming to above
|mentioned flexibility and ASTM D 4956-09 type -vi retro reflectivity performance of the flexible prismatic sheeting|
jused in AFP shall be submitted by the tenderer during pre-qualification and supply of material.2 years Pre
|aualiication warranty for field performance shall be submitted by the contractor for technical qualification in the
lender
Aluminium backed Flexible Prismatic
(AFF) Sheeting Each 8400 9200
C.E.(H) METRO (Addl)
x ( mare CEH ih
Whe
ee \a} east!
(A) C&M C.E(H) PROJECT
Oonke
lim LEI CEN Sco
DIRECTOR HRS C.E.(H) CKICP C.E.(H) TNRSP-I.
Whig
4Basic rates for the
si. _ [Psyear 2019-20 [Basic rates Approved
Description of Item Unit for the year 2021-22
No. Approved by BOB 2
(excluding GST) | (¢*ctding GST)
[Digitally Printed Retro Reflectorized Overhead Cantilever Gantry Informatory
1S |sign Board
Providing and fixing of Retro Reflectorized Overhead Cantilever Informatory sign made of cube comer Micro
prismatic grade sheeting conforming to Type XI standards of [RC67 - 2012 and ASTMD4956 - 09, specification
land fixed over 2mm thick aluminum sheet fixed on back supporting frame mild steel L angle of size 50mm
lsomm x Gmm. The Vertical support post for the installation of overhead sign Gantry shall be made of 30088]
(Nominal Bore) MS Pipe with 12mm thick with a ground clearance of 6 meters along with 8ONB (Nominal Bore]
IMs Pipe with 4mm thick and 40NB (Nominal Bore) MS Pipe with 3.20mm thick support posts. MS Base plate of
size 1200mm x 120mm x 25mm and MS Top plate of size 900mm x 1650mm x 16mm to be used to hold the
lsign board at the top and bottom respectively. MS Stiffener plates 8mm thick of sizes 420x420, 082x420,
l2gax288, 288x927 &e 44x130 are to be used. Anchor bolts of dimension 25mm dia and 1000mm length are to be
lused as fixtures, The approved direction information should be digitally printed and should have 70% of the co-
etlcient of Retro-reflection values against the values as mentioned in Table 6.9 of IRC67 ~ 2012:The Latex printer
lused for digital printing should use inks with low VOC emissions and have green guard, eco logo certificates as
lper UL 2801 standards, The retro-reflective sheeting shall be covered under 10 years warranty issued for field
performance and a certified copy of three years Outdoor exposure report shall be obtained as per IRC 67-2012 (As
lper MoRT&IH specification No.801).Cantilever sign shall be installed at the site as per the approved structural andl
Jioundation drawing provided in the tender document and including cost and conveyance of all materials
lequipment, machineries to worksite, inchuding all labour charges for fixing the gantry in position with all leads
land lifts, loading charges and necessary for satisfactory completion of the work as directed by the engineei
Jcharge etc., complete
Digitally Printed Retro Reflectorized
Overhead Cantilever Gantry
informatory Sign Board of Size 5.00m
lx 1.80m,
Each | 4,68,127/- 5,40,490/-
Aaa wage]
C.E.(H)C&M —C.E.(H) PROJECT
(or
\x QASarrt
(H)P.D.&L — C.E(H)IN&RR.
Ie
-
or
ORO ier
PE ves C.E,(H) CKICP. C.E.(H) TNRSP-IL DG HIGHWAYS
C.E.(H) METRO (Addl) ‘higBasic rates for the
st ‘ear 2019-20
No. Description of Item Unit | approved by BOB
(excluding GST)
Basic rates Approved|
for the year 2021-22
(excluding GST)
16 |Digitally Printed Retro Reflectorized Overhead Gantry Informatory Sign Board
JProviding and fixing of Retro Reflectorized Overhead Cantilever Informatory sign made of cube comer Micro|
[Prismatic grade sheeting conforming to Type XI standards of IRC67 - 2012 and ASTMD4956 - 09, specification
Jand fixed over 2mm thick aluminum sheet fixed on back supporting frame mild steel 1 angle of size 0mm x|
lsomm x 6mm. The Vertical support post for the installation of overhead sign Gantry shall be made of S00NB|
(Nominal Bore) MS Pipe with 12mm thick with a ground clearance of 6 meters along with 8ONB (Nominal Bore}
'S Pipe with 4mm thick and 40NB (Nominal Hore) MS Pipe with 3.20mm thick support posts. MS Base plate o
size 120mm x 120mm x 25mm and MS Top plate of size 900mm x 1650mm x 16mm to be used to hold the
en board at the top and bottom respectively. MS Stiflener plates 8mm thick of sizes 420x420, 682x420,
|258x288, 288x927 & 44x130 are to be used. Anchor bolts of dimension 25mm dia and 1000mm length are to be|
ed ag fixtures, The approved direction information should be digitally printed and should have 70% of the co-
ficient of Retro-reflection values against the values as mentioned in Table 6.9 of IRC67 ~ 2012-The Latex printer
lused for digital printing should use inks with low VOC emissions and have green guard, eco logo certificates as
Jncr UL 2801 standards, The retro-reflective sheeting shall be covered under 10 years warranty issued for fled]
Jperformance and a certified copy of three years Outdoor exposure report shall be obtained as per IRC 67-2012 (As|
Jper MoRT&H specification No.801}.Cantilever sign shall be installed at the site as per the approved structural and|
foundation drawing provided in the tender document and including cost and conveyance of all materials,
quipment, machineries to worksite, inchuding all labour charges for fixing the gantry in position with all leads
|and lifts, loading charges and necessary for satisfactory completion of the work as directed by the engineer-in-|
taange ete., complete,
[Digitally Printed Retro Reflectorized
lOverhead Gantry Informatory Sign | Each | 8,81,911/- 10,15,160/-
Board
C.E(H)C&M — C.E(H) PROJECT CE
rte ‘
OF ibe Spl Sajal
ee. HRS EqnyeKle cE(TNRSPAL —DGHIGhWAYS
C.E.(H) METRO (Addl)
ear] yar’ r “a\ 4
5a SSSR ka al
Ihsi.
Basic rates for the |.
year 2019.20 [Basic rates Approved
Description of Item Unit | approved by BOE, 7 the year 2o2i-22
(excluding GST) e
17
\Digitally Printed Retro Reflectorized Sign Board using UV Inkjet Printer
JProviding and fixing of Retro Reflectorized Sign Boards made out of cube comer micro prismatic grade sheeting of|
htype-XI standards of IRC 67-2012 and ASTM D 4956 ~ 09 specification, Digitally Printed using UV Inkjet Printer|
|(ovis) for traffic colour, images/ logos/ text and laminated with clear electro-cuttable film and applied to properly
lprepared sign substrates, fixed over 2mm Aluminium sheet with back supporting frame of S0xSOx6mm Mild Steel
Ii? angle and supported on a 15ONE: (Nominal Bore) pipe with 4.50mm thick with an overall height from top of the
Jpoard to fousdation. The sign board should be of 2.10m clear height from the ground level to the bottom of the
lsign board and 1.10m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to
the ground by means of properly designed foundation with MIS grade cement concrote of size 450x450x1 100mm
jinctucing cost and conveyance of all materials, equipment, machineries to worksite, including all labour charges
lor fixing the gantry in position with all leads and lifts, loading charges and necessary for satisfactory completion
lof the work as dicected by the engineer-in-charge etc., complete. The Micro prismatic sheeting should have
jminimum 70% co-efficient of Retro-reflection values as per table 6.90 of IRC 67-2012. The setro-reflective
[sheeting shall be covered under 10 Years warranty issued for field performance and a certified copy of 3 years
Joutdoor exposure report shall be obtained as per IRC 67-2012. The warranty shall be inclusive of digitally printed
limages/ logos) test/ legends and their bonding to the retro-reflective sheeting (as per MoyT&sif specification
[n0.801) of Size ~3.64m x 2.42m
Digitally Printed Retro Reflectorized -
ISign Board using UV Inkjet Printer | Ech 1,87,285/ 1,87,550/
\Nte Mien
C.E. (H) C&M. C.E.(H) PROJECT
hele
4
;
ESP gwanetn ae a Sel
DIRECTOR HRS 'C.E.(H) CKICP C.E.(H) TNRSP-II. DG HIGHWAYS
x
Ea” a
)PD&1 CE(H\NERR. “CE(H)NH
he
C.E.(H) METRO (Addl) y 12
ItBasic rates for the
sh. | ., |. year 2019-20
Re Description of Item Unit | approved by BOE
{excluding GST)
Basic rates Approved|
for the year 2021-22
(excluding GST)
Digitally Printed Fluorescent Coloured Retro Reflectorized Sign Board using
18 latex Printer
Jproviding and fixing of Retro Reflectorized Sign Boards made out of cube corner micro prismatic grade]
[Fluorescent Coloured sheeting of Type-XI standards of IRC 67-2012 and ASTM D 4956 ~ 09 specification, Digitally
Printed using Latex printing for trafic colour, text and laminated with clear electro-cuttable film and applied to
|properly prepared sign substrates, fixed over 2mm Aluminium sheet with back supporting frame of S0x50x6mm|
ild Steel ‘L’ angle and supported on a 1SONE: (Nominal Bore) pipe with 4.50mm thick with an overall height fom
lop of the board to foundation. ‘The sign board should be of 2.10m clear height from the ground level to the
lbottom of the sign board and 1.10m below ground level. The sign post should be painted as per IRC 67-2012 andl
lirmly fixed to the ground by means of properly designed foundation with MIS grade cement concrete of size]
1450x450x1 300mm including cost and conveyance of all materials, equipment, machineries to worksite, includi
lal labour charges for fixing the gantry in position with all leads and lifts, loading charges and necessary for|
leatisfactory completion of the work as directed by the engineer-in-charge etc., complete, The Micro prismatic]
Iruorescent Coloured sheeting should have minimum covefficient of Retro-reflection values as per table 6.90 of
IIRC 67-2012. The retro-reflective sheeting shall be covered under 10 Years warranty issued for field performance|
land a certified copy of 3 years outdoor exposure report shall be obtained as per IRC 67-2012. The warranty shall
be inclusive of digitally printed test/ legends and their bonding to the retro-reflective sheeting (as per MorT&ty
specification no.801). The Latex printer used for digital printing should have inks of low VOC emissions and have
lereen guard, eco logo certificates as per UL2801 standards.of Size - 9.04m x 2.42m
Digitally Printed Fluorescent Coloured
Retro Reflectorized Sign Board using | Each | 1,33,711/- 1,51,502/-
Latex Printer
“Yor
Leh wees Ae Re giants auf
C.E.(H)C&M — C.E(H) PROJECT (HP DaL CEMRERR “CEC
Se
Odnlv Vr
sao (fetes. Me
DIRECTOR HRS C.E.(H) CKICP C.E,(H) TNRS|
C.E{H) METRO (Addl)
13