Professional Documents
Culture Documents
Design of Column Base: Project
Design of Column Base: Project
Along the B
The bearing pressure at edge = 0.0 N/mm2
At column face = -0.2 N/mm2
Moment at column face = -328.6 N-mm/mm
Required thickness of plate = #NUM! mm
#NUM!
Provided base plate thickness = 20.0 mm
Number of stiffener = 2.0
Thickness of stiffener plate = 16.0 mm
Depth provided = 500.0 mm
Neutral axis depth Yb = 158.6 mm
Yt = 361.4 mm
Moment of inertia I = 796876190.5 mm4
Zt = 3674.7 mm3
Required = -1.5 mm3
OK
Along the D
The bearing pressure at edge = 0.3 N/mm2
At column face = 0.1 N/mm2
Moment at column face = 659.7 N-mm/mm
Required thickness of plate = 4.9 mm
Thickness of plate is OK
Provided base plate thickness = 20.0 mm
Number of stiffener = 2.0
Thickness = 16.0 mm
Depth provided = 500.0 mm
Neutral axis depth Yb = 176.4 mm
Yt = 343.6 mm
Moment of inertia I = 722709333.3 mm4
Zt = 4674.1 mm3
Required = 3.0 mm3
OK
Anchor Bolts
Grade of Bolts 8.8
Tensile capacity of bolts 141.1 kN
Shear strength of bolts 90.7 kN
Length of bolts 900.0 mm
Along B
Total force is to be resisted by bolts = -253.3 kN
Hence there will tension in holding down bolts
Number of bolts required to resist tension = 1.8
Number of bolts required to resist shear = 0.4
Along D
Total force is to be resisted by bolts -320.0 kN
Hence there will tension in holding down bolts
Number of bolts required to resist tension = 2.3
Number of bolts required to resist shear = 0.2